NFS4_ACL(5) NFSv4 Access Control Lists NFS4_ACL(5)NAMEnfs4_acl - NFSv4 Access Control Lists
DESCRIPTION
An ACL is a list of permissions associated with a file or directory and
consists of one or more Access Control Entries (ACEs). NFSv4 ACLs pro‐
vide finer granularity than typical POSIX read/write/execute permis‐
sions and are similar to CIFS ACLs.
A sample NFSv4 file ACL might look like the following (see the ACL FOR‐
MAT section for detailed information):
A::OWNER@:rwatTnNcCy
A::alice@nfsdomain.org:rxtncy
A::bob@nfsdomain.org:rwadtTnNcCy
A:g:GROUP@:rtncy
D:g:GROUP@:waxTC
A::EVERYONE@:rtncy
D::EVERYONE@:waxTC
Some observations:
- In the example output above, the user `alice@nfsdomain.org' has the
equivalent of "read" and "execute" permissions, `bob@nfsdomain.org'
has "read" and "write", and both `GROUP@' and `EVERYONE@' have
"read".
- NFSv4 ACLs are "default-deny"; that is, if a permission is not
explicitly granted by an Allow ACE, it is denied. Because of this,
the two Deny ACEs above are superfluous and could be excluded by the
server. See the A WARNING ABOUT DENY ACES section for more informa‐
tion.
- NFSv4 servers may return an ACL slightly different than one you set.
For example, a server that always allows reading the attributes of a
file may silently turn on the read-attributes permission, and a
server that does not support separate write-data and append-data
permissions, e.g., may choose to turn off both if you set only one.
In extreme cases the server may also reorder or combine ACEs. As a
general rule, however, servers will attempt to ensure that the ACLs
they return are no more permissive than the ones you set.
ACL FORMAT
An NFSv4 ACL is written as an acl_spec, which is a comma- or white‐
space-delimited string consisting of one or more ace_specs. A single
NFSv4 ACE is written as an ace_spec, which is a colon-delimited,
4-field string in the following format:
type:flags:principal:permissions
ACE TYPES:
There are four types of ACEs, each represented by a single character.
An ACE must have exactly one type.
A Allow - allow principal to perform actions requiring permis‐
sions.
D Deny - prevent principal from performing actions requiring per‐
missions.
U Audit - log any attempted access by principal which requires
permissions. Requires one or both of the successful-access and
failed-access flags. System-dependent; not supported by all
servers.
L Alarm - generate a system alarm at any attempted access by prin‐
cipal which requires permissions. Requires one or both of the
successful-access and failed-access flags. System-dependent;
not supported by all servers.
ACE FLAGS:
There are three kinds of ACE flags: group, inheritance, and administra‐
tive. An Allow or Deny ACE may contain zero or more flags, while an
Audit or Alarm ACE must contain at least one of the successful-access
and failed-access flags.
Note that ACEs are inherited from the parent directory's ACL at the
time a file or subdirectory is created. Accordingly, inheritance flags
can be used only in ACEs in a directory's ACL (and are therefore
stripped from inherited ACEs in a new file's ACL). Please see the
INHERITANCE FLAGS COMMENTARY section for more information.
GROUP FLAG - can be used in any ACE
g group - indicates that principal represents a group instead of a
user.
INHERITANCE FLAGS - can be used in any directory ACE
d directory-inherit - newly-created subdirectories will inherit
the ACE.
f file-inherit - newly-created files will inherit the ACE, minus
its inheritance flags. Newly-created subdirectories will
inherit the ACE; if directory-inherit is not also specified in
the parent ACE, inherit-only will be added to the inherited ACE.
n no-propagate-inherit - newly-created subdirectories will inherit
the ACE, minus its inheritance flags.
i inherit-only - the ACE is not considered in permissions checks,
but it is heritable; however, the inherit-only flag is stripped
from inherited ACEs.
ADMINISTRATIVE FLAGS - can be used in Audit and Alarm ACEs
S successful-access - trigger an alarm/audit when principal is
allowed to perform an action covered by permissions.
F failed-access - trigger an alarm/audit when principal is pre‐
vented from performing an action covered by permissions.
ACE PRINCIPALS:
A principal is either a named user (e.g., `myuser@nfsdomain.org') or
group (provided the group flag is also set), or one of three special
principals: `OWNER@', `GROUP@', and `EVERYONE@', which are, respec‐
tively, analogous to the POSIX user/group/other distinctions used in,
e.g., chmod(1).
ACE PERMISSIONS:
There are a variety of different ACE permissions (13 for files, 14 for
directories), each represented by a single character. An ACE should
have one or more of the following permissions specified:
r read-data (files) / list-directory (directories)
w write-data (files) / create-file (directories)
a append-data (files) / create-subdirectory (directories)
x execute (files) / change-directory (directories)
d delete - delete the file/directory. Some servers will allow a
delete to occur if either this permission is set in the
file/directory or if the delete-child permission is set in its
parent direcory.
D delete-child - remove a file or subdirectory from within the
given directory (directories only)
t read-attributes - read the attributes of the file/directory.
T write-attributes - write the attributes of the file/directory.
n read-named-attributes - read the named attributes of the
file/directory.
N write-named-attributes - write the named attributes of the
file/directory.
c read-ACL - read the file/directory NFSv4 ACL.
C write-ACL - write the file/directory NFSv4 ACL.
o write-owner - change ownership of the file/directory.
y synchronize - allow clients to use synchronous I/O with the
server.
INHERITANCE FLAGS COMMENTARY
Inheritance flags can be divided into two categories: "primary" (file-
inherit and directory-inherit); and "secondary" (no-propagate-inherit
and inherit-only), which are significant only insofar as they affect
the two "primary" flags.
The no-propagate-inherit and inherit-only flags can be tricky to remem‐
ber: the former determines whether or not a new child directory's
inherited ACE is itself heritable by a grandchild subdirectory; the
latter determines whether or not a heritable ACE affects the parent
directory itself (in addition to being heritable). They can be used
in-tandem.
When a subdirectory inherits an ACE from its parent directory's ACL,
this can happen in one of two different ways, depending on the server
implementation:
- In the simple case, that exact same ACE is set in the subdirectory's
ACL.
- In the other case, two different ACEs will instead be set in the
subdirectory's ACL: one with all inheritance flags removed, and one
with the inherit-only flag added. The former is the "effective"
inherited ACE (used in the subdirectory's own permissions checks);
the latter is the "heritable" inherited ACE (when the subdirectory
has directories created within it, they inherit it). This approach
makes it easier to modify access rights to the subdirectory itself
without modifying its heritable ACEs.
A WARNING ABOUT DENY ACES
Deny ACEs should be avoided whenever possible. Although they are a
valid part of NFSv4 ACLs, Deny ACEs can be confusing and complicated.
This stems primarily from the fact that, unlike POSIX ACLs and CIFS
ACLs, the ordering of ACEs within NFSv4 ACLs affects how they are eval‐
uated.
First, it is important to note that (despite some unfortunate ambiguity
in RFC3530) NFSv4 ACLs are "default-deny" in practice. That is, if a
permission is not explicitly granted, it is denied.
In general, when a principal is attempting to perform an action over
NFSv4 which requires one or more permissions, an access check is per‐
formed. The NFSv4 ACL (assuming one is present) is evaluated ACE-by-
ACE until every one of those permissions has been addressed, or until
the end of the ACL is reached. If every requisite permission was
granted by Allow ACEs and was not forbidden by Deny ACEs (see next
paragraph), the action is allowed to proceed. Otherwise, the action is
forbidden.
Note that each requisite permission is only addressed once -- that is,
after a permission has been explicitly Allowed or Denied once during an
access check, any subsequent ACEs in the ACL which affect that permis‐
sion are no longer considered. This often introduces problematic
ordering issues when Deny ACEs are present.
Additionally, in some cases Group-Deny ACEs can be difficult (if not
impossible) to enforce, since a server might not know about all of a
given principal's memberships in remote groups, e.g.
Because NFSv4 ACLs are "default-deny", the use of Deny ACEs can (and
should) be avoided entirely in most cases.
AUTHORS
Tools for viewing and manipulating NFSv4 ACLs, nfs4_getfacl and
nfs4_setfacl, were written by people at CITI, the Center for Informa‐
tion Technology Integration (http://www.citi.umich.edu). This manpage
was written by David Richter and J. Bruce Fields.
CONTACT
Please send bug reports, feature requests, and comments to
<nfsv4@linux-nfs.org>.
SEE ALSOnfs4_getfacl(1), nfs4_setacl(1), RFC3530 (NFSv4.0), NFSv4.1 Minor Ver‐
sion Draft.
Linux version 0.3.3, August 2008 NFS4_ACL(5)
