netlink man page on Kali

Man page or keyword search:  
man Server   9211 pages
apropos Keyword Search (all sections)
Output format
Kali logo
[printable version]

NETLINK(7)		   Linux Programmer's Manual		    NETLINK(7)

NAME
       netlink - communication between kernel and user space (AF_NETLINK)

SYNOPSIS
       #include <asm/types.h>
       #include <sys/socket.h>
       #include <linux/netlink.h>

       netlink_socket = socket(AF_NETLINK, socket_type, netlink_family);

DESCRIPTION
       Netlink	is  used  to transfer information between the kernel and user-
       space processes.	 It consists of a standard sockets-based interface for
       user  space  processes  and  an internal kernel API for kernel modules.
       The internal kernel interface is not documented in  this	 manual	 page.
       There  is  also	an  obsolete  netlink  interface via netlink character
       devices; this interface is not documented here and is provided only for
       backward compatibility.

       Netlink	is  a datagram-oriented service.  Both SOCK_RAW and SOCK_DGRAM
       are valid values for socket_type.  However, the netlink	protocol  does
       not distinguish between datagram and raw sockets.

       netlink_family  selects	the kernel module or netlink group to communi‐
       cate with.  The currently assigned netlink families are:

       NETLINK_ROUTE
	      Receives routing and link updates and may be used to modify  the
	      routing  tables (both IPv4 and IPv6), IP addresses, link parame‐
	      ters, neighbor setups, queueing disciplines, traffic classes and
	      packet classifiers (see rtnetlink(7)).

       NETLINK_W1 (Linux 2.6.13 to 2.16.17)
	      Messages from 1-wire subsystem.

       NETLINK_USERSOCK
	      Reserved for user-mode socket protocols.

       NETLINK_FIREWALL (up to and including Linux 3.4)
	      Transport	 IPv4  packets	from netfilter to user space.  Used by
	      ip_queue kernel module.  After a long period of  being  declared
	      obsolete	(in  favor  of	the more advanced nfnetlink_queue fea‐
	      ture), NETLINK_FIREWALL was removed in Linux 3.5.

       NETLINK_INET_DIAG (since Linux 2.6.14)
	      Query information about sockets  of  various  protocol  families
	      from the kernel (see sock_diag(7)).

       NETLINK_SOCK_DIAG (since Linux 3.3)
	      A synonym for NETLINK_INET_DIAG.

       NETLINK_NFLOG (up to and including Linux 3.16)
	      Netfilter/iptables ULOG.

       NETLINK_XFRM
	      IPsec.

       NETLINK_SELINUX (since Linux 2.6.4)
	      SELinux event notifications.

       NETLINK_ISCSI (since Linux 2.6.15)
	      Open-iSCSI.

       NETLINK_AUDIT (since Linux 2.6.6)
	      Auditing.

       NETLINK_FIB_LOOKUP (since Linux 2.6.13)
	      Access to FIB lookup from user space.

       NETLINK_CONNECTOR (since Linux 2.6.14)
	      Kernel  connector.   See	Documentation/connector/* in the Linux
	      kernel source tree for further information.

       NETLINK_NETFILTER (since Linux 2.6.14)
	      Netfilter subsystem.

       NETLINK_SCSITRANSPORT (since Linux 2.6.19)
	      SCSI Transports.

       NETLINK_RDMA (since Linux 3.0)
	      Infiniband RDMA.

       NETLINK_IP6_FW (up to and including Linux 3.4)
	      Transport IPv6 packets from netfilter to user  space.   Used  by
	      ip6_queue kernel module.

       NETLINK_DNRTMSG
	      DECnet routing messages.

       NETLINK_KOBJECT_UEVENT (since Linux 2.6.10)
	      Kernel messages to user space.

       NETLINK_GENERIC (since Linux 2.6.15)
	      Generic netlink family for simplified netlink usage.

       NETLINK_CRYPTO (since Linux 3.2)
	      Netlink  interface  to  request information about ciphers regis‐
	      tered with the kernel crypto API as well as allow	 configuration
	      of the kernel crypto API.

       Netlink messages consist of a byte stream with one or multiple nlmsghdr
       headers and associated payload.	The byte  stream  should  be  accessed
       only  with  the	standard  NLMSG_*  macros.  See netlink(3) for further
       information.

       In multipart messages (multiple nlmsghdr headers with  associated  pay‐
       load  in	 one byte stream) the first and all following headers have the
       NLM_F_MULTI flag set, except for the last header	 which	has  the  type
       NLMSG_DONE.

       After each nlmsghdr the payload follows.

	   struct nlmsghdr {
	       __u32 nlmsg_len;	   /* Length of message including header */
	       __u16 nlmsg_type;   /* Type of message content */
	       __u16 nlmsg_flags;  /* Additional flags */
	       __u32 nlmsg_seq;	   /* Sequence number */
	       __u32 nlmsg_pid;	   /* Sender port ID */
	   };

       nlmsg_type can be one of the standard message types: NLMSG_NOOP message
       is to be ignored, NLMSG_ERROR message signals an error and the  payload
       contains	 an nlmsgerr structure, NLMSG_DONE message terminates a multi‐
       part message.

	   struct nlmsgerr {
	       int error;	 /* Negative errno or 0 for acknowledgements */
	       struct nlmsghdr msg;  /* Message header that caused the error */
	   };

       A netlink family usually specifies more message types, see  the	appro‐
       priate	manual	 pages	 for   that,  for  example,  rtnetlink(7)  for
       NETLINK_ROUTE.

       Standard flag bits in nlmsg_flags
       ──────────────────────────────────────────────────────────
       NLM_F_REQUEST   Must be set on all request messages.
       NLM_F_MULTI     The message is part of a	 multipart  mes‐
		       sage terminated by NLMSG_DONE.
       NLM_F_ACK       Request for an acknowledgment on success.
       NLM_F_ECHO      Echo this request.

       Additional flag bits for GET requests
       ────────────────────────────────────────────────────────────────────
       NLM_F_ROOT     Return the complete table instead of a single entry.
       NLM_F_MATCH    Return  all entries matching criteria passed in mes‐
		      sage content.  Not implemented yet.
       NLM_F_ATOMIC   Return an atomic snapshot of the table.
       NLM_F_DUMP     Convenience macro; equivalent to
		      (NLM_F_ROOT|NLM_F_MATCH).

       Note that NLM_F_ATOMIC requires	the  CAP_NET_ADMIN  capability	or  an
       effective UID of 0.

       Additional flag bits for NEW requests
       ────────────────────────────────────────────────────────────
       NLM_F_REPLACE   Replace existing matching object.
       NLM_F_EXCL      Don't replace if the object already exists.
       NLM_F_CREATE    Create object if it doesn't already exist.
       NLM_F_APPEND    Add to the end of the object list.

       nlmsg_seq  and  nlmsg_pid  are used to track messages.  nlmsg_pid shows
       the origin of the message.  Note that there isn't  a  1:1  relationship
       between	nlmsg_pid and the PID of the process if the message originated
       from a netlink socket.  See the ADDRESS	FORMATS	 section  for  further
       information.

       Both nlmsg_seq and nlmsg_pid are opaque to netlink core.

       Netlink	is  not	 a  reliable protocol.	It tries its best to deliver a
       message to its destination(s), but may drop messages  when  an  out-of-
       memory  condition  or  other  error  occurs.  For reliable transfer the
       sender can request an acknowledgement from the receiver by setting  the
       NLM_F_ACK  flag.	  An  acknowledgment is an NLMSG_ERROR packet with the
       error field set to 0.  The application must  generate  acknowledgements
       for  received messages itself.  The kernel tries to send an NLMSG_ERROR
       message for every failed packet.	 A user	 process  should  follow  this
       convention too.

       However,	 reliable  transmissions from kernel to user are impossible in
       any case.  The kernel can't send a netlink message if the socket buffer
       is  full: the message will be dropped and the kernel and the user-space
       process will no longer have the same view of kernel state.  It is up to
       the  application	 to  detect  when  this happens (via the ENOBUFS error
       returned by recvmsg(2)) and resynchronize.

   Address formats
       The sockaddr_nl structure describes a netlink client in user  space  or
       in  the	kernel.	 A sockaddr_nl can be either unicast (only sent to one
       peer) or sent to netlink multicast groups (nl_groups not equal 0).

	   struct sockaddr_nl {
	       sa_family_t     nl_family;  /* AF_NETLINK */
	       unsigned short  nl_pad;	   /* Zero */
	       pid_t	       nl_pid;	   /* Port ID */
	       __u32	       nl_groups;  /* Multicast groups mask */
	   };

       nl_pid is the unicast address of netlink socket.	 It's always 0 if  the
       destination is in the kernel.  For a user-space process, nl_pid is usu‐
       ally the PID of the process owning the  destination  socket.   However,
       nl_pid  identifies  a netlink socket, not a process.  If a process owns
       several netlink sockets, then nl_pid can be equal  to  the  process  ID
       only  for at most one socket.  There are two ways to assign nl_pid to a
       netlink socket.	If the application sets nl_pid before calling bind(2),
       then  it	 is  up to the application to make sure that nl_pid is unique.
       If the application sets it to 0, the kernel takes care of assigning it.
       The  kernel  assigns  the  process  ID  to the first netlink socket the
       process opens and assigns a unique nl_pid to every netlink socket  that
       the process subsequently creates.

       nl_groups  is  a	 bit  mask with every bit representing a netlink group
       number.	Each netlink family has a set of 32  multicast	groups.	  When
       bind(2) is called on the socket, the nl_groups field in the sockaddr_nl
       should be set to a bit mask of the groups which it wishes to listen to.
       The default value for this field is zero which means that no multicasts
       will be received.  A socket may multicast messages to any of the multi‐
       cast  groups by setting nl_groups to a bit mask of the groups it wishes
       to send to when it calls sendmsg(2) or does a  connect(2).   Only  pro‐
       cesses  with  an effective UID of 0 or the CAP_NET_ADMIN capability may
       send or listen to a netlink multicast group.  Since Linux 2.6.13,  mes‐
       sages  can't be broadcast to multiple groups.  Any replies to a message
       received for a multicast group should be sent back to the  sending  PID
       and the multicast group.	 Some Linux kernel subsystems may additionally
       allow other users to send and/or receive messages.  As  at  Linux  3.0,
       the   NETLINK_KOBJECT_UEVENT,   NETLINK_GENERIC,	  NETLINK_ROUTE,   and
       NETLINK_SELINUX groups allow  other  users  to  receive	messages.   No
       groups allow other users to send messages.

   Socket options
       To  set	or  get a netlink socket option, call getsockopt(2) to read or
       setsockopt(2) to write the option with the option level argument set to
       SOL_NETLINK.  Unless otherwise noted, optval is a pointer to an int.

       NETLINK_PKTINFO (since Linux 2.6.14)
	      Enable  nl_pktinfo  control messages for received packets to get
	      the extended destination group number.

       NETLINK_ADD_MEMBERSHIP, NETLINK_DROP_MEMBERSHIP (since Linux 2.6.14)
	      Join/leave a group specified by optval.

       NETLINK_LIST_MEMBERSHIPS (since Linux 4.2)
	      Retrieve all groups a socket  is	a  member  of.	 optval	 is  a
	      pointer to __u32 and optlen is the size of the array.  The array
	      is filled with the full membership set of the  socket,  and  the
	      required array size is returned in optlen.

       NETLINK_BROADCAST_ERROR (since Linux 2.6.30)
	      When  not set, netlink_broadcast() only reports ESRCH errors and
	      silently ignore NOBUFS errors.

       NETLINK_NO_ENOBUFS (since Linux 2.6.30)
	      This flag can be used by	unicast	 and  broadcast	 listeners  to
	      avoid receiving ENOBUFS errors.

       NETLINK_LISTEN_ALL_NSID (since Linux 4.2)
	      When  set,  this	socket will receive netlink notifications from
	      all network namespaces that have an nsid assigned into the  net‐
	      work  namespace  where  the socket has been opened.  The nsid is
	      sent to user space via an ancillary data.

       NETLINK_CAP_ACK (since Linux 4.2)
	      The kernel may fail to  allocate	the  necessary	room  for  the
	      acknowledgment  message  back  to user space.  This option trims
	      off the payload of the original netlink  message.	  The  netlink
	      message header is still included, so the user can guess from the
	      sequence number which message triggered the acknowledgment.

VERSIONS
       The socket interface to netlink first appeared Linux 2.2.

       Linux 2.0 supported a more  primitive  device-based  netlink  interface
       (which  is  still  available as a compatibility option).	 This obsolete
       interface is not described here.

NOTES
       It is often better to use netlink via libnetlink or libnl than via  the
       low-level kernel interface.

BUGS
       This manual page is not complete.

EXAMPLE
       The following example creates a NETLINK_ROUTE netlink socket which will
       listen to  the  RTMGRP_LINK  (network  interface	 create/delete/up/down
       events)	and RTMGRP_IPV4_IFADDR (IPv4 addresses add/delete events) mul‐
       ticast groups.

	   struct sockaddr_nl sa;

	   memset(&sa, 0, sizeof(sa));
	   sa.nl_family = AF_NETLINK;
	   sa.nl_groups = RTMGRP_LINK | RTMGRP_IPV4_IFADDR;

	   fd = socket(AF_NETLINK, SOCK_RAW, NETLINK_ROUTE);
	   bind(fd, (struct sockaddr *) &sa, sizeof(sa));

       The next example demonstrates how to send a netlink message to the ker‐
       nel  (pid  0).	Note  that  the	 application must take care of message
       sequence numbers in order to reliably track acknowledgements.

	   struct nlmsghdr *nh;	   /* The nlmsghdr with payload to send */
	   struct sockaddr_nl sa;
	   struct iovec iov = { nh, nh->nlmsg_len };
	   struct msghdr msg;

	   msg = { &sa, sizeof(sa), &iov, 1, NULL, 0, 0 };
	   memset(&sa, 0, sizeof(sa));
	   sa.nl_family = AF_NETLINK;
	   nh->nlmsg_pid = 0;
	   nh->nlmsg_seq = ++sequence_number;
	   /* Request an ack from kernel by setting NLM_F_ACK */
	   nh->nlmsg_flags |= NLM_F_ACK;

	   sendmsg(fd, &msg, 0);

       And the last example is about reading netlink message.

	   int len;
	   char buf[8192];     /* 8192 to avoid message truncation on
				  platforms with page size > 4096 */
	   struct iovec iov = { buf, sizeof(buf) };
	   struct sockaddr_nl sa;
	   struct msghdr msg;
	   struct nlmsghdr *nh;

	   msg = { &sa, sizeof(sa), &iov, 1, NULL, 0, 0 };
	   len = recvmsg(fd, &msg, 0);

	   for (nh = (struct nlmsghdr *) buf; NLMSG_OK (nh, len);
		nh = NLMSG_NEXT (nh, len)) {
	       /* The end of multipart message */
	       if (nh->nlmsg_type == NLMSG_DONE)
		   return;

	       if (nh->nlmsg_type == NLMSG_ERROR)
		   /* Do some error handling */
	       ...

	       /* Continue with parsing payload */
	       ...
	   }

SEE ALSO
       cmsg(3), netlink(3), capabilities(7), rtnetlink(7), sock_diag(7)

       information about libnetlink ⟨ftp://ftp.inr.ac.ru/ip-routing/iproute2*⟩

       information about libnl ⟨http://www.infradead.org/~tgr/libnl/⟩

       RFC 3549 "Linux Netlink as an IP Services Protocol"

COLOPHON
       This page is part of release 4.14 of the Linux  man-pages  project.   A
       description  of	the project, information about reporting bugs, and the
       latest	 version    of	  this	  page,	   can	   be	  found	    at
       https://www.kernel.org/doc/man-pages/.

Linux				  2017-09-15			    NETLINK(7)
[top]

List of man pages available for Kali

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net