mpartition man page on Manjaro

Man page or keyword search:  
man Server   11224 pages
apropos Keyword Search (all sections)
Output format
Manjaro logo
[printable version]

mpartition(1)							 mpartition(1)

Name
       mpartition - partition an MSDOS hard disk

Note of warning
       This  manpage  has  been	 automatically generated from mtools's texinfo
       documentation, and may not be entirely accurate or complete.   See  the
       end of this man page for details.

Description
       The  mpartition command is used to create MS-DOS file systems as parti‐
       tions.  This is intended to be used on non-Linux systems, i.e.  systems
       where  fdisk  and  easy access to SCSI devices are not available.  This
       command only works on drives whose partition variable is set.

       mpartition -p drive
       mpartition -r drive
       mpartition -I [-B bootSector] drive
       mpartition -a drive
       mpartition -d drive
       mpartition -c [-s sectors] [-h heads]
       [-t cylinders] [-v [-T type] [-b
       begin] [-l length] [-f]

       Mpartition supports the following operations:

       p      Prints a command line to recreate the partition for  the	drive.
	      Nothing  is  printed  if	the  partition	for  the  drive is not
	      defined, or an inconsistency has been detected.  If verbose (-v)
	      is also set, prints the current partition table.

       r      Removes the partition described by drive.

       I      Initializes the partition table, and removes all partitions.

       c      Creates the partition described by drive.

       a      "Activates"  the	partition,  i.e.  makes it bootable.  Only one
	      partition can be bootable at a time.

       d      "Deactivates" the partition, i.e. makes it unbootable.

       If no operation is given, the current settings are printed.

       For partition creations, the following options are available:

       s sectors
	      The number of sectors per track of the partition (which is  also
	      the number of sectors per track for the whole drive).

       h heads
	      The  number  of heads of the partition (which is also the number
	      of heads for the whole drive).  By default, the geometry	infor‐
	      mation  (number of sectors and heads) is figured out from neigh‐
	      boring partition table entries, or guessed from the size.

       t cylinders
	      The number of cylinders of the  partition	 (not  the  number  of
	      cylinders of the whole drive.

       b begin
	      The  starting  offset of the partition, expressed in sectors. If
	      begin is not given, mpartition lets the partition begin  at  the
	      start of the disk (partition number 1), or immediately after the
	      end of the previous partition.

       l length
	      The size (length) of the partition, expressed  in	 sectors.   If
	      end  is not given, mpartition figures out the size from the num‐
	      ber of sectors, heads and cylinders.  If	these  are  not	 given
	      either,  it  gives the partition the biggest possible size, con‐
	      sidering disk size and start of the next partition.

       The following option is available for all operation  which  modify  the
       partition table:

       f      Usually, before writing back any changes to the partition, mpar‐
	      tition performs certain consistency checks, such as checking for
	      overlaps	and  proper  alignment	of  the partitions.  If any of
	      these checks fails, the partition table is not changes.  The  -f
	      allows you to override these safeguards.

       The following options are available for all operations:

       v      Together	with  -p  prints  the partition table as it is now (no
	      change operation), or as it is after it is modified.

       vv     If the verbosity flag is given twice, mpartition will print  out
	      a	 hexdump of the partition table when reading it from and writ‐
	      ing it to the device.

       The following option is available for partition table initialization:

       B bootSector
	      Reads the template master boot record from file bootSector.

See Also
       Mtools' texinfo doc

Viewing the texi doc
       This manpage has been automatically  generated  from  mtools's  texinfo
       documentation.  However,	 this  process is only approximative, and some
       items, such as crossreferences, footnotes and indices are lost in  this
       translation process.  Indeed, these items have no appropriate represen‐
       tation in the manpage format.  Moreover, not all information  has  been
       translated into the manpage version.  Thus I strongly advise you to use
       the original texinfo doc.  See the end of this manpage for instructions
       how to view the texinfo doc.

       *      To  generate a printable copy from the texinfo doc, run the fol‐
	      lowing commands:

		     ./configure; make dvi; dvips mtools.dvi

       *      To generate a html copy,	run:

		     ./configure; make html

       A premade html can be found at `http://www.gnu.org/software/mtools/man‐
       ual/mtools.html'

       *      To  generate  an	info  copy (browsable using emacs' info mode),
	      run:

		     ./configure; make info

       The texinfo doc looks most pretty when printed or as html.  Indeed,  in
       the  info  version  certain  examples  are difficult to read due to the
       quoting conventions used in info.

mtools-4.0.18			    09Jan13			 mpartition(1)
[top]

List of man pages available for Manjaro

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net