MKSH(1) BSD Reference Manual MKSH(1)NAME
mksh, sh - MirBSD Korn shell
SYNOPSISmksh [-+abCefhiklmnprUuvXx] [-T /dev/ttyCn | -] [-+o option] [-c string
| -s | file [argument ...]]
builtin-name [argument ...]
DESCRIPTIONmksh is a command interpreter intended for both interactive and shell
script use. Its command language is a superset of the sh(C) shell
language and largely compatible to the original Korn shell.
Most builtins can be called directly, for example if a link points from
its name to the shell; not all make sense, have been tested or work at
all though.
The options are as follows:
-c string mksh will execute the command(s) contained in string.
-i Interactive shell. A shell is "interactive" if this option is
used or if both standard input and standard error are attached
to a tty(4). An interactive shell has job control enabled, ig-
nores the SIGINT, SIGQUIT, and SIGTERM signals, and prints
prompts before reading input (see the PS1 and PS2 parameters).
It also processes the ENV parameter or the mkshrc file (see
below). For non-interactive shells, the trackall option is on
by default (see the set command below).
-l Login shell. If the basename the shell is called with (i.e.
argv[0]) starts with '-' or if this option is used, the shell
is assumed to be a login shell; see Startup files below.
-p Privileged shell. A shell is "privileged" if this option is
used or if the real user ID or group ID does not match the ef-
fective user ID or group ID (see getuid(2) and getgid(2)).
Clearing the privileged option causes the shell to set its ef-
fective user ID (group ID) to its real user ID (group ID). For
further implications, see Startup files.
-r Restricted shell. A shell is "restricted" if this option is
used. The following restrictions come into effect after the
shell processes any profile and ENV files:
+ The cd (and chdir) command is disabled.
+ The SHELL, ENV, and PATH parameters cannot be changed.
+ Command names can't be specified with absolute or relative
paths.
+ The -p option of the built-in command command can't be
used.
+ Redirections that create files can't be used (i.e. '>',
'>|', '>>', '<>').
-s The shell reads commands from standard input; all non-option
arguments are positional parameters.
-T tty Spawn mksh on the tty(4) device given. Superuser only. If tty
is a dash, detach from controlling terminal (daemonise) in-
stead.
In addition to the above, the options described in the set built-in com-
mand can also be used on the command line: both [-+abCefhkmnuvXx] and
[-+o option] can be used for single letter or long options, respectively.
If neither the -c nor the -s option is specified, the first non-option
argument specifies the name of a file the shell reads commands from. If
there are no non-option arguments, the shell reads commands from the
standard input. The name of the shell (i.e. the contents of $0) is deter-
mined as follows: if the -c option is used and there is a non-option ar-
gument, it is used as the name; if commands are being read from a file,
the file is used as the name; otherwise, the basename the shell was
called with (i.e. argv[0]) is used.
The exit status of the shell is 127 if the command file specified on the
command line could not be opened, or non-zero if a fatal syntax error oc-
curred during the execution of a script. In the absence of fatal errors,
the exit status is that of the last command executed, or zero, if no com-
mand is executed.
Startup files
For the actual location of these files, see FILES. A login shell
processes the system profile first. A privileged shell then processes the
suid profile. A non-privileged login shell processes the user profile
next. A non-privileged interactive shell checks the value of the ENV
parameter after subjecting it to parameter, command, arithmetic and tilde
('~') substitution; if unset or empty, the user mkshrc profile is pro-
cessed; otherwise, if a file whose name is the substitution result ex-
ists, it is processed; non-existence is silently ignored.
Command syntax
The shell begins parsing its input by removing any backslash-newline com-
binations, then breaking it into words. Words (which are sequences of
characters) are delimited by unquoted whitespace characters (space, tab,
and newline) or meta-characters ('<', '>', '|', ';', '(', ')', and '&').
Aside from delimiting words, spaces and tabs are ignored, while newlines
usually delimit commands. The meta-characters are used in building the
following tokens: '<', '<&', '<<', '<<<', '>', '>&', '>>', '&>', etc. are
used to specify redirections (see Input/output redirection below); '|' is
used to create pipelines; '|&' is used to create co-processes (see Co-
processes below); ';' is used to separate commands; '&' is used to create
asynchronous pipelines; '&&' and '||' are used to specify conditional ex-
ecution; ';;', ';&' and ';|' are used in case statements; '(( .. ))' is
used in arithmetic expressions; and lastly, '( .. )' is used to create
subshells.
Whitespace and meta-characters can be quoted individually using a
backslash ('\'), or in groups using double ('"') or single (''') quotes.
Note that the following characters are also treated specially by the
shell and must be quoted if they are to represent themselves: '\', '"',
''', '#', '$', '`', '~', '{', '}', '*', '?', and '['. The first three of
these are the above mentioned quoting characters (see Quoting below);
'#', if used at the beginning of a word, introduces a comment - every-
thing after the '#' up to the nearest newline is ignored; '$' is used to
introduce parameter, command, and arithmetic substitutions (see
Substitution below); '`' introduces an old-style command substitution
(see Substitution below); '~' begins a directory expansion (see Tilde
expansion below); '{' and '}' delimit csh(1)-style alterations (see Brace
expansion below); and finally, '*', '?', and '[' are used in file name
generation (see File name patterns below).
As words and tokens are parsed, the shell builds commands, of which there
are two basic types: simple-commands, typically programmes that are exe-
cuted, and compound-commands, such as for and if statements, grouping
constructs, and function definitions.
A simple-command consists of some combination of parameter assignments
(see Parameters below), input/output redirections (see Input/output
redirections below), and command words; the only restriction is that
parameter assignments come before any command words. The command words,
if any, define the command that is to be executed and its arguments. The
command may be a shell built-in command, a function, or an external com-
mand (i.e. a separate executable file that is located using the PATH
parameter; see Command execution below). Note that all command constructs
have an exit status: for external commands, this is related to the status
returned by wait(2) (if the command could not be found, the exit status
is 127; if it could not be executed, the exit status is 126); the exit
status of other command constructs (built-in commands, functions,
compound-commands, pipelines, lists, etc.) are all well-defined and are
described where the construct is described. The exit status of a command
consisting only of parameter assignments is that of the last command sub-
stitution performed during the parameter assignment or 0 if there were no
command substitutions.
Commands can be chained together using the '|' token to form pipelines,
in which the standard output of each command but the last is piped (see
pipe(2)) to the standard input of the following command. The exit status
of a pipeline is that of its last command. All commands of a pipeline are
executed in separate subshells; this is allowed by POSIX but differs from
both variants of AT&T UNIX ksh, where all but the last command were exe-
cuted in subshells; see the read builtin's description for implications
and workarounds. A pipeline may be prefixed by the '!' reserved word
which causes the exit status of the pipeline to be logically complement-
ed: if the original status was 0, the complemented status will be 1; if
the original status was not 0, the complemented status will be 0.
Lists of commands can be created by separating pipelines by any of the
following tokens: '&&', '||', '&', '|&', and ';'. The first two are for
conditional execution: "cmd1 && cmd2" executes cmd2 only if the exit
status of cmd1 is zero; '||' is the opposite - cmd2 is executed only if
the exit status of cmd1 is non-zero. '&&' and '||' have equal precedence
which is higher than that of '&', '|&', and ';', which also have equal
precedence. Note that the '&&' and '||' operators are "left-associative".
For example, both of these commands will print only "bar":
$ false && echo foo || echo bar
$ true || echo foo && echo bar
The '&' token causes the preceding command to be executed asynchronously;
that is, the shell starts the command but does not wait for it to com-
plete (the shell does keep track of the status of asynchronous commands;
see Job control below). When an asynchronous command is started when job
control is disabled (i.e. in most scripts), the command is started with
signals SIGINT and SIGQUIT ignored and with input redirected from
/dev/null (however, redirections specified in the asynchronous command
have precedence). The '|&' operator starts a co-process which is a spe-
cial kind of asynchronous process (see Co-processes below). Note that a
command must follow the '&&' and '||' operators, while it need not follow
'&', '|&', or ';'. The exit status of a list is that of the last command
executed, with the exception of asynchronous lists, for which the exit
status is 0.
Compound commands are created using the following reserved words. These
words are only recognised if they are unquoted and if they are used as
the first word of a command (i.e. they can't be preceded by parameter as-
signments or redirections):
case else function then ! (
do esac if time [[ ((
done fi in until {
elif for select while }
In the following compound command descriptions, command lists (denoted as
list) that are followed by reserved words must end with a semicolon, a
newline, or a (syntactically correct) reserved word. For example, the
following are all valid:
$ { echo foo; echo bar; }
$ { echo foo; echo bar<newline>}
$ { { echo foo; echo bar; } }
This is not valid:
$ { echo foo; echo bar }
(list)
Execute list in a subshell. There is no implicit way to pass en-
vironment changes from a subshell back to its parent.
{ list; }
Compound construct; list is executed, but not in a subshell. Note
that '{' and '}' are reserved words, not meta-characters.
case word in [[(] pattern [| pat] ...) list [;; | ;& | ;| ]] ... esac
The case statement attempts to match word against a specified
pattern; the list associated with the first successfully matched
pattern is executed. Patterns used in case statements are the same
as those used for file name patterns except that the restrictions
regarding '.' and '/' are dropped. Note that any unquoted space be-
fore and after a pattern is stripped; any space within a pattern
must be quoted. Both the word and the patterns are subject to
parameter, command, and arithmetic substitution, as well as tilde
substitution.
For historical reasons, open and close braces may be used instead
of in and esac e.g. case $foo { *) echo bar;; }.
The list terminators are:
';;' Terminate after the list.
';&' Fall through into the next list.
';|' Evaluate the remaining pattern-list tuples.
The exit status of a case statement is that of the executed list;
if no list is executed, the exit status is zero.
for name [in word ...]; do list; done
For each word in the specified word list, the parameter name is set
to the word and list is executed. If in is not used to specify a
word list, the positional parameters ($1, $2, etc.) are used in-
stead. For historical reasons, open and close braces may be used
instead of do and done e.g. for i; { echo $i; }. The exit status of
a for statement is the last exit status of list; if list is never
executed, the exit status is zero.
if list; then list; [elif list; then list;] ... [else list;] fi
If the exit status of the first list is zero, the second list is
executed; otherwise, the list following the elif, if any, is exe-
cuted with similar consequences. If all the lists following the if
and elifs fail (i.e. exit with non-zero status), the list following
the else is executed. The exit status of an if statement is that of
non-conditional list that is executed; if no non-conditional list
is executed, the exit status is zero.
select name [in word ...]; do list; done
The select statement provides an automatic method of presenting the
user with a menu and selecting from it. An enumerated list of the
specified word(s) is printed on standard error, followed by a
prompt (PS3: normally '#? '). A number corresponding to one of the
enumerated words is then read from standard input, name is set to
the selected word (or unset if the selection is not valid), REPLY
is set to what was read (leading/trailing space is stripped), and
list is executed. If a blank line (i.e. zero or more IFS octets) is
entered, the menu is reprinted without executing list.
When list completes, the enumerated list is printed if REPLY is
NULL, the prompt is printed, and so on. This process continues un-
til an end-of-file is read, an interrupt is received, or a break
statement is executed inside the loop. If "in word ..." is omitted,
the positional parameters are used (i.e. $1, $2, etc.). For histor-
ical reasons, open and close braces may be used instead of do and
done e.g. select i; { echo $i; }. The exit status of a select
statement is zero if a break statement is used to exit the loop,
non-zero otherwise.
until list; do list; done
This works like while, except that the body is executed only while
the exit status of the first list is non-zero.
while list; do list; done
A while is a pre-checked loop. Its body is executed as often as the
exit status of the first list is zero. The exit status of a while
statement is the last exit status of the list in the body of the
loop; if the body is not executed, the exit status is zero.
function name { list; }
Defines the function name (see Functions below). Note that redirec-
tions specified after a function definition are performed whenever
the function is executed, not when the function definition is exe-
cuted.
name() command
Mostly the same as function (see Functions below). Whitespace
(space or tab) after name will be ignored most of the time.
function name() { list; }
The same as name() (bashism). The function keyword is ignored.
time [-p] [pipeline]
The Command execution section describes the time reserved word.
(( expression ))
The arithmetic expression expression is evaluated; equivalent to
"let expression" (see Arithmetic expressions and the let command,
below).
[[ expression ]]
Similar to the test and [ ... ] commands (described later), with
the following exceptions:
+ Field splitting and file name generation are not performed on
arguments.
+ The -a (AND) and -o (OR) operators are replaced with '&&' and
'||', respectively.
+ Operators (e.g. '-f', '=', '!') must be unquoted.
+ Parameter, command, and arithmetic substitutions are performed
as expressions are evaluated and lazy expression evaluation is
used for the '&&' and '||' operators. This means that in the
following statement, $(<foo) is evaluated if and only if the
file foo exists and is readable:
$ [[ -r foo && $(<foo) = b*r ]]
+ The second operand of the '!=' and '=' expressions are patterns
(e.g. the comparison [[ foobar = f*r ]] succeeds). This even
works indirectly:
$ bar=foobar; baz='f*r'
$ [[ $bar = $baz ]]; echo $?
$ [[ $bar = "$baz" ]]; echo $?
Perhaps surprisingly, the first comparison succeeds, whereas
the second doesn't.
Quoting
Quoting is used to prevent the shell from treating characters or words
specially. There are three methods of quoting. First, '\' quotes the fol-
lowing character, unless it is at the end of a line, in which case both
the '\' and the newline are stripped. Second, a single quote (''') quotes
everything up to the next single quote (this may span lines). Third, a
double quote ('"') quotes all characters, except '$', '`' and '\', up to
the next unquoted double quote. '$' and '`' inside double quotes have
their usual meaning (i.e. parameter, command, or arithmetic substitution)
except no field splitting is carried out on the results of double-quoted
substitutions. If a '\' inside a double-quoted string is followed by '\',
'$', '`', or '"', it is replaced by the second character; if it is fol-
lowed by a newline, both the '\' and the newline are stripped; otherwise,
both the '\' and the character following are unchanged.
If a single-quoted string is preceded by an unquoted '$', C style
backslash expansion (see below) is applied (even single quote characters
inside can be escaped and do not terminate the string then); the expanded
result is treated as any other single-quoted string. If a double-quoted
string is preceded by an unquoted '$', the latter is ignored.
Backslash expansion
In places where backslashes are expanded, certain C and AT&T UNIX ksh or
GNU bash style escapes are translated. These include '\a', '\b', '\f',
'\n', '\r', '\t', '\U########', '\u####', and '\v'. For '\U########' and
'\u####', "#" means a hexadecimal digit, of thich there may be none up to
four or eight; these escapes translate a Unicode codepoint to UTF-8.
Furthermore, '\E' and '\e' expand to the escape character.
In the print builtin mode, '\"', '\'', and '\?' are explicitly excluded;
octal sequences must have the none up to three octal digits "#" prefixed
with the digit zero ('\0###'); hexadecimal sequences '\x##' are limited
to none up to two hexadecimal digits "#"; both octal and hexadecimal se-
quences convert to raw octets; '\#', where # is none of the above,
translates to \# (backslashes are retained).
Backslash expansion in the C style mode slightly differs: octal sequences
'\###' must have no digit zero prefixing the one up to three octal digits
"#" and yield raw octets; hexadecimal sequences '\x#*' greedily eat up as
many hexadecimal digits "#" as they can and terminate with the first
non-hexadecimal digit; these translate a Unicode codepoint to UTF-8. The
sequence '\c#', where "#" is any octet, translates to Ctrl-# (which basi-
cally means, '\c?' becomes DEL, everything else is bitwise ANDed with
0x1F). Finally, '\#', where # is none of the above, translates to # (has
the backslash trimmed), even if it is a newline.
Aliases
There are two types of aliases: normal command aliases and tracked
aliases. Command aliases are normally used as a short hand for a long or
often used command. The shell expands command aliases (i.e. substitutes
the alias name for its value) when it reads the first word of a command.
An expanded alias is re-processed to check for more aliases. If a command
alias ends in a space or tab, the following word is also checked for
alias expansion. The alias expansion process stops when a word that is
not an alias is found, when a quoted word is found, or when an alias word
that is currently being expanded is found.
The following command aliases are defined automatically by the shell:
autoload='typeset -fu'
functions='typeset -f'
hash='alias -t'
history='fc -l'
integer='typeset -i'
local='typeset'
login='exec login'
nameref='typeset -n'
nohup='nohup '
r='fc -e -'
stop='kill -STOP'
suspend='kill -STOP $$'
type='whence -v'
Tracked aliases allow the shell to remember where it found a particular
command. The first time the shell does a path search for a command that
is marked as a tracked alias, it saves the full path of the command. The
next time the command is executed, the shell checks the saved path to see
that it is still valid, and if so, avoids repeating the path search.
Tracked aliases can be listed and created using alias -t. Note that
changing the PATH parameter clears the saved paths for all tracked
aliases. If the trackall option is set (i.e. set -o trackall or set -h),
the shell tracks all commands. This option is set automatically for non-
interactive shells. For interactive shells, only the following commands
are automatically tracked: cat(1), cc(1), chmod(1), cp(1), date(1),
ed(1), emacs(1), grep(1), ls(1), make(1), mv(1), pr(1), rm(1), sed(1),
sh(1), vi(1), and who(1).
Substitution
The first step the shell takes in executing a simple-command is to per-
form substitutions on the words of the command. There are three kinds of
substitution: parameter, command, and arithmetic. Parameter substitu-
tions, which are described in detail in the next section, take the form
$name or ${...}; command substitutions take the form $(command) or
(deprecated) `command`; and arithmetic substitutions take the form
$((expression)).
If a substitution appears outside of double quotes, the results of the
substitution are generally subject to word or field splitting according
to the current value of the IFS parameter. The IFS parameter specifies a
list of octets which are used to break a string up into several words;
any octets from the set space, tab, and newline that appear in the IFS
octets are called "IFS whitespace". Sequences of one or more IFS whi-
tespace octets, in combination with zero or one non-IFS whitespace oc-
tets, delimit a field. As a special case, leading and trailing IFS whi-
tespace and trailing IFS non-whitespace are stripped (i.e. no leading or
trailing empty field is created by it); leading non-IFS whitespace does
create an empty field.
Example: If IFS is set to "<space>:", and VAR is set to
"<space>A<space>:<space><space>B::D", the substitution for $VAR results
in four fields: 'A', 'B', '' (an empty field), and 'D'. Note that if the
IFS parameter is set to the NULL string, no field splitting is done; if
the parameter is unset, the default value of space, tab, and newline is
used.
Also, note that the field splitting applies only to the immediate result
of the substitution. Using the previous example, the substitution for
$VAR:E results in the fields: 'A', 'B', '', and 'D:E', not 'A', 'B', '',
'D', and 'E'. This behavior is POSIX compliant, but incompatible with
some other shell implementations which do field splitting on the word
which contained the substitution or use IFS as a general whitespace del-
imiter.
The results of substitution are, unless otherwise specified, also subject
to brace expansion and file name expansion (see the relevant sections
below).
A command substitution is replaced by the output generated by the speci-
fied command which is run in a subshell. For $(command) substitutions,
normal quoting rules are used when command is parsed; however, for the
deprecated `command` form, a '\' followed by any of '$', '`', or '\' is
stripped (a '\' followed by any other character is unchanged). As a spe-
cial case in command substitutions, a command of the form <file is inter-
preted to mean substitute the contents of file. Note that $(<foo) has the
same effect as $(cat foo).
Note that some shells do not use a recursive parser for command substitu-
tions, leading to failure for certain constructs; to be portable, use as
workaround 'x=$(cat) <<"EOF"' (or the newline-keeping 'x=<<"EOF"' exten-
sion) instead to merely slurp the string. IEEE Std 1003.1 ("POSIX")
recommends to use case statements of the form 'x=$(case $foo in (bar)
echo $bar ;; (*) echo $baz ;; esac)' instead, which would work but not
serve as example for this portability issue.
x=$(case $foo in bar) echo $bar ;; *) echo $baz ;; esac)
# above fails to parse on old shells; below is the workaround
x=$(eval $(cat)) <<"EOF"
case $foo in bar) echo $bar ;; *) echo $baz ;; esac
EOF
Arithmetic substitutions are replaced by the value of the specified ex-
pression. For example, the command print $((2+3*4)) displays 14. See
Arithmetic expressions for a description of an expression.
Parameters
Parameters are shell variables; they can be assigned values and their
values can be accessed using a parameter substitution. A parameter name
is either one of the special single punctuation or digit character param-
eters described below, or a letter followed by zero or more letters or
digits ('_' counts as a letter). The latter form can be treated as arrays
by appending an array index of the form [expr] where expr is an arithmet-
ic expression. Array indices in mksh are limited to the range 0 through
4294967295, inclusive. That is, they are a 32-bit unsigned integer.
Parameter substitutions take the form $name, ${name}, or ${name[expr]}
where name is a parameter name. Substitution of all array elements with
${name[*]} and ${name[@]} works equivalent to $* and $@ for positional
parameters. If substitution is performed on a parameter (or an array
parameter element) that is not set, a null string is substituted unless
the nounset option (set -o nounset or set -u) is set, in which case an
error occurs.
Parameters can be assigned values in a number of ways. First, the shell
implicitly sets some parameters like '#', 'PWD', and '$'; this is the
only way the special single character parameters are set. Second, parame-
ters are imported from the shell's environment at startup. Third, parame-
ters can be assigned values on the command line: for example, FOO=bar
sets the parameter "FOO" to "bar"; multiple parameter assignments can be
given on a single command line and they can be followed by a simple-
command, in which case the assignments are in effect only for the dura-
tion of the command (such assignments are also exported; see below for
the implications of this). Note that both the parameter name and the '='
must be unquoted for the shell to recognise a parameter assignment. The
construct FOO+=baz is also recognised; the old and new values are immedi-
ately concatenated. The fourth way of setting a parameter is with the
export, global, readonly, and typeset commands; see their descriptions in
the Command execution section. Fifth, for and select loops set parameters
as well as the getopts, read, and set -A commands. Lastly, parameters can
be assigned values using assignment operators inside arithmetic expres-
sions (see Arithmetic expressions below) or using the ${name=value} form
of the parameter substitution (see below).
Parameters with the export attribute (set using the export or typeset -x
commands, or by parameter assignments followed by simple commands) are
put in the environment (see environ(7)) of commands run by the shell as
name=value pairs. The order in which parameters appear in the environment
of a command is unspecified. When the shell starts up, it extracts param-
eters and their values from its environment and automatically sets the
export attribute for those parameters.
Modifiers can be applied to the ${name} form of parameter substitution:
${name:-word}
If name is set and not NULL, it is substituted; otherwise, word
is substituted.
${name:+word}
If name is set and not NULL, word is substituted; otherwise,
nothing is substituted.
${name:=word}
If name is set and not NULL, it is substituted; otherwise, it is
assigned word and the resulting value of name is substituted.
${name:?word}
If name is set and not NULL, it is substituted; otherwise, word
is printed on standard error (preceded by name:) and an error oc-
curs (normally causing termination of a shell script, function,
or script sourced using the '.' built-in). If word is omitted,
the string "parameter null or not set" is used instead. Currently
a bug, if word is a variable which expands to the null string,
the error message is also printed.
Note that, for all of the above, word is actually considered quoted, and
special parsing rules apply. The parsing rules also differ on whether the
expression is double-quoted: word then uses double-quoting rules, except
for the double quote itself ('"') and the closing brace, which, if
backslash escaped, gets quote removal applied.
In the above modifiers, the ':' can be omitted, in which case the condi-
tions only depend on name being set (as opposed to set and not NULL). If
word is needed, parameter, command, arithmetic, and tilde substitution
are performed on it; if word is not needed, it is not evaluated.
The following forms of parameter substitution can also be used (if name
is an array, its element #0 will be substituted in a scalar context):
${#name}
The number of positional parameters if name is '*', '@', or not
specified; otherwise the length (in characters) of the string
value of parameter name.
${#name[*]}
${#name[@]}
The number of elements in the array name.
${%name}
The width (in screen columns) of the string value of parameter
name, or -1 if ${name} contains a control character.
${!name}
The name of the variable referred to by name. This will be name
except when name is a name reference (bound variable), created by
the nameref command (which is an alias for typeset -n).
${!name[*]}
${!name[@]}
The names of indices (keys) in the array name.
${name#pattern}
${name##pattern}
If pattern matches the beginning of the value of parameter name,
the matched text is deleted from the result of substitution. A
single '#' results in the shortest match, and two of them result
in the longest match. Cannot be applied to a vector (${*} or ${@}
or ${array[*]} or ${array[@]}).
${name%pattern}
${name%%pattern}
Like ${..#..} substitution, but it deletes from the end of the
value. Cannot be applied to a vector.
${name/pattern/string}
${name//pattern/string}
Like ${..#..} substitution, but it replaces the longest match of
pattern, anchored anywhere in the value, with string. If pattern
begins with '#', it is anchored at the beginning of the value; if
it begins with '%', it is anchored at the end. A single '/' re-
places the first occurence of the search pattern, and two of them
replace all occurences. If /string is omitted, the pattern is re-
placed by the empty string, i.e. deleted. Cannot be applied to a
vector. Inefficiently implemented.
${name:pos:len}
The first len characters of name, starting at position pos, are
substituted. Both pos and :len are optional. If pos is negative,
counting starts at the end of the string; if it is omitted, it
defaults to 0. If len is omitted or greater than the length of
the remaining string, all of it is substituted. Both pos and len
are evaluated as arithmetic expressions. Currently, pos must
start with a space, opening parenthesis or digit to be recog-
nised. Cannot be applied to a vector.
${name@#}
The internal hash of the expansion of name. At the moment, this
is NZAT (a never-zero 32-bit hash based on Bob Jenkins' one-at-
a-time hash), but this is not set. This is the hash the shell
uses internally for its associative arrays.
Note that pattern may need extended globbing pattern (@(...)), single
('...') or double ("...") quote escaping unless -o sh is set.
The following special parameters are implicitly set by the shell and can-
not be set directly using assignments:
! Process ID of the last background process started. If no back-
ground processes have been started, the parameter is not set.
# The number of positional parameters ($1, $2, etc.).
$ The PID of the shell, or the PID of the original shell if it is a
subshell. Do NOT use this mechanism for generating temporary file
names; see mktemp(1) instead.
- The concatenation of the current single letter options (see the
set command below for a list of options).
? The exit status of the last non-asynchronous command executed. If
the last command was killed by a signal, $? is set to 128 plus
the signal number.
0 The name of the shell, determined as follows: the first argument
to mksh if it was invoked with the -c option and arguments were
given; otherwise the file argument, if it was supplied; or else
the basename the shell was invoked with (i.e. argv[0]). $0 is
also set to the name of the current script or the name of the
current function, if it was defined with the function keyword
(i.e. a Korn shell style function).
1 .. 9 The first nine positional parameters that were supplied to the
shell, function, or script sourced using the '.' built-in. Furth-
er positional parameters may be accessed using ${number}.
* All positional parameters (except 0), i.e. $1, $2, $3, ...
If used outside of double quotes, parameters are separate words
(which are subjected to word splitting); if used within double
quotes, parameters are separated by the first character of the
IFS parameter (or the empty string if IFS is NULL).
@ Same as $*, unless it is used inside double quotes, in which case
a separate word is generated for each positional parameter. If
there are no positional parameters, no word is generated. $@ can
be used to access arguments, verbatim, without losing NULL argu-
ments or splitting arguments with spaces.
The following parameters are set and/or used by the shell:
_ (underscore) When an external command is executed by the
shell, this parameter is set in the environment of the new
process to the path of the executed command. In interactive
use, this parameter is also set in the parent shell to the
last word of the previous command.
CDPATH Search path for the cd built-in command. It works the same
way as PATH for those directories not beginning with '/' in
cd commands. Note that if CDPATH is set and does not contain
'.' or contains an empty path, the current directory is not
searched. Also, the cd built-in command will display the
resulting directory when a match is found in any search path
other than the empty path.
COLUMNS Set to the number of columns on the terminal or window. Al-
ways set, defaults to 80, unless the value as reported by
stty(1) is non-zero and sane enough; similar for LINES. This
parameter is used by the interactive line editing modes, and
by the select, set -o, and kill -l commands to format infor-
mation columns.
ENV If this parameter is found to be set after any profile files
are executed, the expanded value is used as a shell startup
file. It typically contains function and alias definitions.
ERRNO Integer value of the shell's errno variable. It indicates
the reason the last system call failed. Not yet implemented.
EXECSHELL If set, this parameter is assumed to contain the shell that
is to be used to execute commands that execve(2) fails to
execute and which do not start with a "#!shell" sequence.
FCEDIT The editor used by the fc command (see below).
FPATH Like PATH, but used when an undefined function is executed
to locate the file defining the function. It is also
searched when a command can't be found using PATH. See
Functions below for more information.
HISTFILE The name of the file used to store command history. When as-
signed to, history is loaded from the specified file. Also,
several invocations of the shell will share history if their
HISTFILE parameters all point to the same file.
Note: If HISTFILE isn't set, no history file is used. This
is different from AT&T UNIX ksh.
HISTSIZE The number of commands normally stored for history. The de-
fault is 500.
HOME The default directory for the cd command and the value sub-
stituted for an unqualified ~ (see Tilde expansion below).
IFS Internal field separator, used during substitution and by
the read command, to split values into distinct arguments;
normally set to space, tab, and newline. See Substitution
above for details.
Note: This parameter is not imported from the environment
when the shell is started.
KSHEGID The effective group id of the shell.
KSHGID The real group id of the shell.
KSHUID The real user id of the shell.
KSH_VERSION The name and version of the shell (read-only). See also the
version commands in Emacs editing mode and Vi editing mode
sections, below.
LINENO The line number of the function or shell script that is
currently being executed.
LINES Set to the number of lines on the terminal or window. Always
set, defaults to 24.
OLDPWD The previous working directory. Unset if cd has not success-
fully changed directories since the shell started, or if the
shell doesn't know where it is.
OPTARG When using getopts, it contains the argument for a parsed
option, if it requires one.
OPTIND The index of the next argument to be processed when using
getopts. Assigning 1 to this parameter causes getopts to
process arguments from the beginning the next time it is in-
voked.
PATH A colon separated list of directories that are searched when
looking for commands and files sourced using the '.' command
(see below). An empty string resulting from a leading or
trailing colon, or two adjacent colons, is treated as a '.'
(the current directory).
PGRP The process ID of the shell's process group leader.
PIPESTATUS An array containing the errorlevel (exit status) codes, one
by one, of the last pipeline run in the foreground.
PPID The process ID of the shell's parent.
PS1 The primary prompt for interactive shells. Parameter, com-
mand, and arithmetic substitutions are performed, and '!' is
replaced with the current command number (see the fc command
below). A literal '!' can be put in the prompt by placing
'!!' in PS1.
The default prompt is '$ ' for non-root users, '# ' for
root. If mksh is invoked by root and PS1 does not contain a
'#' character, the default value will be used even if PS1
already exists in the environment.
The mksh distribution comes with a sample dot.mkshrc con-
taining a sophisticated example, but you might like the fol-
lowing one (note that ${HOSTNAME:=$(hostname)} and the
root-vs-user distinguishing clause are (in this example) ex-
ecuted at PS1 assignment time, while the $USER and $PWD are
escaped and thus will be evaluated each time a prompt is
displayed):
PS1='${USER:=$(id -un)}'"@${HOSTNAME:=$(hostname)}:\$PWD $(
if (( USER_ID )); then print \$; else print \#; fi) "
Note that since the command-line editors try to figure out
how long the prompt is (so they know how far it is to the
edge of the screen), escape codes in the prompt tend to mess
things up. You can tell the shell not to count certain se-
quences (such as escape codes) by prefixing your prompt with
a character (such as Ctrl-A) followed by a carriage return
and then delimiting the escape codes with this character.
Any occurences of that character in the prompt are not
printed. By the way, don't blame me for this hack; it's
derived from the original ksh88(1), which did print the del-
imiter character so you were out of luck if you did not have
any non-printing characters.
Since Backslashes and other special characters may be inter-
preted by the shell, to set PS1 either escape the backslash
itself, or use double quotes. The latter is more practical.
This is a more complex example, avoiding to directly enter
special characters (for example with ^V in the emacs editing
mode), which embeds the current working directory, in re-
verse video (colour would work, too), in the prompt string:
x=$(print \\001)
PS1="$x$(print \\r)$x$(tput smso)$x\$PWD$x$(tput rmso)$x> "
Due to pressure from David G. Korn, mksh now also supports
the following form:
PS1=$'\1\r\1\e[7m\1$PWD\1\e[0m\1> '
PS2 Secondary prompt string, by default '> ', used when more in-
put is needed to complete a command.
PS3 Prompt used by the select statement when reading a menu
selection. The default is '#? '.
PS4 Used to prefix commands that are printed during execution
tracing (see the set -x command below). Parameter, command,
and arithmetic substitutions are performed before it is
printed. The default is '+ '.
PWD The current working directory. May be unset or NULL if the
shell doesn't know where it is.
RANDOM Each time RANDOM is referenced, it is assigned a number
between 0 and 32767 from a Linear Congruential PRNG first.
REPLY Default parameter for the read command if no names are
given. Also used in select loops to store the value that is
read from standard input.
SECONDS The number of seconds since the shell started or, if the
parameter has been assigned an integer value, the number of
seconds since the assignment plus the value that was as-
signed.
TMOUT If set to a positive integer in an interactive shell, it
specifies the maximum number of seconds the shell will wait
for input after printing the primary prompt (PS1). If the
time is exceeded, the shell exits.
TMPDIR The directory temporary shell files are created in. If this
parameter is not set, or does not contain the absolute path
of a writable directory, temporary files are created in
/tmp.
USER_ID The effective user id of the shell.
Tilde expansion
Tilde expansion which is done in parallel with parameter substitution, is
done on words starting with an unquoted '~'. The characters following the
tilde, up to the first '/', if any, are assumed to be a login name. If
the login name is empty, '+', or '-', the value of the HOME, PWD, or
OLDPWD parameter is substituted, respectively. Otherwise, the password
file is searched for the login name, and the tilde expression is substi-
tuted with the user's home directory. If the login name is not found in
the password file or if any quoting or parameter substitution occurs in
the login name, no substitution is performed.
In parameter assignments (such as those preceding a simple-command or
those occurring in the arguments of alias, export, global, readonly, and
typeset), tilde expansion is done after any assignment (i.e. after the
equals sign) or after an unquoted colon (':'); login names are also del-
imited by colons.
The home directory of previously expanded login names are cached and re-
used. The alias -d command may be used to list, change, and add to this
cache (e.g. alias -d fac=/usr/local/facilities; cd ~fac/bin).
Brace expansion (alteration)
Brace expressions take the following form:
prefix{str1,...,strN}suffix
The expressions are expanded to N words, each of which is the concatena-
tion of prefix, stri, and suffix (e.g. "a{c,b{X,Y},d}e" expands to four
words: "ace", "abXe", "abYe", and "ade"). As noted in the example, brace
expressions can be nested and the resulting words are not sorted. Brace
expressions must contain an unquoted comma (',') for expansion to occur
(e.g. {} and {foo} are not expanded). Brace expansion is carried out
after parameter substitution and before file name generation.
File name patterns
A file name pattern is a word containing one or more unquoted '?', '*',
'+', '@', or '!' characters or "[..]" sequences. Once brace expansion has
been performed, the shell replaces file name patterns with the sorted
names of all the files that match the pattern (if no files match, the
word is left unchanged). The pattern elements have the following meaning:
? Matches any single character.
* Matches any sequence of octets.
[..] Matches any of the octets inside the brackets. Ranges of octets
can be specified by separating two octets by a '-' (e.g. "[a0-9]"
matches the letter 'a' or any digit). In order to represent it-
self, a '-' must either be quoted or the first or last octet in
the octet list. Similarly, a ']' must be quoted or the first oc-
tet in the list if it is to represent itself instead of the end
of the list. Also, a '!' appearing at the start of the list has
special meaning (see below), so to represent itself it must be
quoted or appear later in the list.
[!..] Like [..], except it matches any octet not inside the brackets.
*(pattern|...|pattern)
Matches any string of octets that matches zero or more oc-
currences of the specified patterns. Example: The pattern
*(foo|bar) matches the strings "", "foo", "bar", "foobarfoo",
etc.
+(pattern|...|pattern)
Matches any string of octets that matches one or more occurrences
of the specified patterns. Example: The pattern +(foo|bar)
matches the strings "foo", "bar", "foobar", etc.
?(pattern|...|pattern)
Matches the empty string or a string that matches one of the
specified patterns. Example: The pattern ?(foo|bar) only matches
the strings "", "foo", and "bar".
@(pattern|...|pattern)
Matches a string that matches one of the specified patterns. Ex-
ample: The pattern @(foo|bar) only matches the strings "foo" and
"bar".
!(pattern|...|pattern)
Matches any string that does not match one of the specified pat-
terns. Examples: The pattern !(foo|bar) matches all strings ex-
cept "foo" and "bar"; the pattern !(*) matches no strings; the
pattern !(?)* matches all strings (think about it).
Note that mksh (and pdksh) never matches '.' and '..', but AT&T UNIX ksh,
Bourne sh, and GNU bash do.
Note that none of the above pattern elements match either a period ('.')
at the start of a file name or a slash ('/'), even if they are explicitly
used in a [..] sequence; also, the names '.' and '..' are never matched,
even by the pattern '.*'.
If the markdirs option is set, any directories that result from file name
generation are marked with a trailing '/'.
Input/output redirection
When a command is executed, its standard input, standard output, and
standard error (file descriptors 0, 1, and 2, respectively) are normally
inherited from the shell. Three exceptions to this are commands in pipe-
lines, for which standard input and/or standard output are those set up
by the pipeline, asynchronous commands created when job control is dis-
abled, for which standard input is initially set to be from /dev/null,
and commands for which any of the following redirections have been speci-
fied:
> file Standard output is redirected to file. If file does not ex-
ist, it is created; if it does exist, is a regular file, and
the noclobber option is set, an error occurs; otherwise, the
file is truncated. Note that this means the command cmd <foo
>foo will open foo for reading and then truncate it when it
opens it for writing, before cmd gets a chance to actually
read foo.
>| file Same as >, except the file is truncated, even if the
noclobber option is set.
>> file Same as >, except if file exists it is appended to instead of
being truncated. Also, the file is opened in append mode, so
writes always go to the end of the file (see open(2)).
< file Standard input is redirected from file, which is opened for
reading.
<> file Same as <, except the file is opened for reading and writing.
<< marker After reading the command line containing this kind of
redirection (called a "here document"), the shell copies
lines from the command source into a temporary file until a
line matching marker is read. When the command is executed,
standard input is redirected from the temporary file. If
marker contains no quoted characters, the contents of the
temporary file are processed as if enclosed in double quotes
each time the command is executed, so parameter, command, and
arithmetic substitutions are performed, along with backslash
('\') escapes for '$', '`', '\', and '\newline', but not for
'"'. If multiple here documents are used on the same command
line, they are saved in order.
If no marker is given, the here document ends at the next <<
and substitution will be performed. If marker is only a set
of either single "''" or double '""' quotes with nothing in
between, the here document ends at the next empty line and
substitution will not be performed.
<<- marker Same as <<, except leading tabs are stripped from lines in
the here document.
<<< word Same as <<, except that word is the here document. This is
called a here string.
<& fd Standard input is duplicated from file descriptor fd. fd can
be a number, indicating the number of an existing file
descriptor; the letter 'p', indicating the file descriptor
associated with the output of the current co-process; or the
character '-', indicating standard input is to be closed.
Note that fd is limited to a single digit in most shell im-
plementations.
>& fd Same as <&, except the operation is done on standard output.
&> file Same as > file 2>&1. This is a GNU bash extension supported
by mksh which also supports the preceding explicit fd number,
for example, 3&> file is the same as 3> file 2>&3 in mksh but
a syntax error in GNU bash.
&>| file, &>> file, &>& fd
Same as >| file, >> file, or >& fd, followed by 2>&1, as
above. These are mksh extensions.
In any of the above redirections, the file descriptor that is redirected
(i.e. standard input or standard output) can be explicitly given by
preceding the redirection with a number (portably, only a single digit).
Parameter, command, and arithmetic substitutions, tilde substitutions,
and (if the shell is interactive) file name generation are all performed
on the file, marker, and fd arguments of redirections. Note, however,
that the results of any file name generation are only used if a single
file is matched; if multiple files match, the word with the expanded file
name generation characters is used. Note that in restricted shells,
redirections which can create files cannot be used.
For simple-commands, redirections may appear anywhere in the command; for
compound-commands (if statements, etc.), any redirections must appear at
the end. Redirections are processed after pipelines are created and in
the order they are given, so the following will print an error with a
line number prepended to it:
$ cat /foo/bar 2>&1 >/dev/null | pr -n -t
File descriptors created by input/output redirections are private to the
Korn shell, but passed to sub-processes if -o posix or -o sh is set.
Arithmetic expressions
Integer arithmetic expressions can be used with the let command, inside
$((..)) expressions, inside array references (e.g. name[expr]), as numer-
ic arguments to the test command, and as the value of an assignment to an
integer parameter.
Expressions are calculated using signed arithmetic and the mksh_ari_t
type (a 32-bit signed integer), unless they begin with a sole '#' charac-
ter, in which case they use mksh_uari_t (a 32-bit unsigned integer).
Expressions may contain alpha-numeric parameter identifiers, array refer-
ences, and integer constants and may be combined with the following C
operators (listed and grouped in increasing order of precedence):
Unary operators:
+ - ! ~ ++ --
Binary operators:
,
= *= /= %= += -= <<= >>= &= ^= |=
||
&&
|
^
&
== !=
< <= >= >
<< >>
+ -
* / %
Ternary operators:
?: (precedence is immediately higher than assignment)
Grouping operators:
( )
Integer constants and expressions are calculated using the mksh_ari_t (if
signed) or mksh_uari_t (if unsigned) type, and are limited to 32 bits.
Overflows wrap silently. Integer constants may be specified with arbi-
trary bases using the notation base#number, where base is a decimal in-
teger specifying the base, and number is a number in the specified base.
Additionally, integers may be prefixed with '0X' or '0x' (specifying base
16), similar to AT&T UNIX ksh, or '0' (base 8), as an mksh extension, in
all forms of arithmetic expressions, except as numeric arguments to the
test command. As a special mksh extension, numbers to the base of one are
treated as either (8-bit transparent) ASCII or Unicode codepoints,
depending on the shell's utf8-mode flag (current setting). The AT&T UNIX
ksh93 syntax of "'x'" instead of "1#x" is also supported. Note that NUL
bytes (integral value of zero) cannot be used. In Unicode mode, raw oc-
tets are mapped into the range EF80..EFFF as in OPTU-8, which is in the
PUA and has been assigned by CSUR for this use. If more than one octet in
ASCII mode, or a sequence of more than one octet not forming a valid and
minimal CESU-8 sequence is passed, the behaviour is undefined (usually,
the shell aborts with a parse error, but rarely, it succeeds, e.g. on the
sequence C2 20). That's why you should always use ASCII mode unless you
know that the input is well-formed UTF-8 in the range of 0000..FFFD.
The operators are evaluated as follows:
unary +
Result is the argument (included for completeness).
unary -
Negation.
! Logical NOT; the result is 1 if argument is zero, 0 if not.
~ Arithmetic (bit-wise) NOT.
++ Increment; must be applied to a parameter (not a literal or
other expression). The parameter is incremented by 1. When
used as a prefix operator, the result is the incremented
value of the parameter; when used as a postfix operator,
the result is the original value of the parameter.
-- Similar to ++, except the parameter is decremented by 1.
, Separates two arithmetic expressions; the left-hand side is
evaluated first, then the right. The result is the value of
the expression on the right-hand side.
= Assignment; the variable on the left is set to the value on
the right.
*= /= += -= <<= >>= &= ^= |=
Assignment operators. <var><op>=<expr> is the same as
<var>=<var><op><expr>, with any operator precedence in
<expr> preserved. For example, "var1 *= 5 + 3" is the same
as specifying "var1 = var1 * (5 + 3)".
|| Logical OR; the result is 1 if either argument is non-zero,
0 if not. The right argument is evaluated only if the left
argument is zero.
&& Logical AND; the result is 1 if both arguments are non-
zero, 0 if not. The right argument is evaluated only if the
left argument is non-zero.
| Arithmetic (bit-wise) OR.
^ Arithmetic (bit-wise) XOR (exclusive-OR).
& Arithmetic (bit-wise) AND.
== Equal; the result is 1 if both arguments are equal, 0 if
not.
!= Not equal; the result is 0 if both arguments are equal, 1
if not.
< Less than; the result is 1 if the left argument is less
than the right, 0 if not.
<= >= >
Less than or equal, greater than or equal, greater than.
See <.
<< >> Shift left (right); the result is the left argument with
its bits shifted left (right) by the amount given in the
right argument.
+ - * /
Addition, subtraction, multiplication, and division.
% Remainder; the result is the remainder of the division of
the left argument by the right. The sign of the result is
unspecified if either argument is negative.
<arg1>?<arg2>:<arg3>
If <arg1> is non-zero, the result is <arg2>; otherwise the
result is <arg3>.
Co-processes
A co-process (which is a pipeline created with the '|&' operator) is an
asynchronous process that the shell can both write to (using print -p)
and read from (using read -p). The input and output of the co-process can
also be manipulated using >&p and <&p redirections, respectively. Once a
co-process has been started, another can't be started until the co-
process exits, or until the co-process's input has been redirected using
an exec n>&p redirection. If a co-process's input is redirected in this
way, the next co-process to be started will share the output with the
first co-process, unless the output of the initial co-process has been
redirected using an exec n<&p redirection.
Some notes concerning co-processes:
+ The only way to close the co-process's input (so the co-process reads
an end-of-file) is to redirect the input to a numbered file descrip-
tor and then close that file descriptor: exec 3>&p; exec 3>&-
+ In order for co-processes to share a common output, the shell must
keep the write portion of the output pipe open. This means that end-
of-file will not be detected until all co-processes sharing the co-
process's output have exited (when they all exit, the shell closes
its copy of the pipe). This can be avoided by redirecting the output
to a numbered file descriptor (as this also causes the shell to close
its copy). Note that this behaviour is slightly different from the
original Korn shell which closes its copy of the write portion of the
co-process output when the most recently started co-process (instead
of when all sharing co-processes) exits.
+ print -p will ignore SIGPIPE signals during writes if the signal is
not being trapped or ignored; the same is true if the co-process in-
put has been duplicated to another file descriptor and print -un is
used.
Functions
Functions are defined using either Korn shell function function-name syn-
tax or the Bourne/POSIX shell function-name() syntax (see below for the
difference between the two forms). Functions are like .-scripts (i.e.
scripts sourced using the '.' built-in) in that they are executed in the
current environment. However, unlike .-scripts, shell arguments (i.e. po-
sitional parameters $1, $2, etc.) are never visible inside them. When the
shell is determining the location of a command, functions are searched
after special built-in commands, before regular and non-regular built-
ins, and before the PATH is searched.
An existing function may be deleted using unset -f function-name. A list
of functions can be obtained using typeset +f and the function defini-
tions can be listed using typeset -f. The autoload command (which is an
alias for typeset -fu) may be used to create undefined functions: when an
undefined function is executed, the shell searches the path specified in
the FPATH parameter for a file with the same name as the function which,
if found, is read and executed. If after executing the file the named
function is found to be defined, the function is executed; otherwise, the
normal command search is continued (i.e. the shell searches the regular
built-in command table and PATH). Note that if a command is not found us-
ing PATH, an attempt is made to autoload a function using FPATH (this is
an undocumented feature of the original Korn shell).
Functions can have two attributes, "trace" and "export", which can be set
with typeset -ft and typeset -fx, respectively. When a traced function is
executed, the shell's xtrace option is turned on for the function's dura-
tion. The "export" attribute of functions is currently not used. In the
original Korn shell, exported functions are visible to shell scripts that
are executed.
Since functions are executed in the current shell environment, parameter
assignments made inside functions are visible after the function com-
pletes. If this is not the desired effect, the typeset command can be
used inside a function to create a local parameter. Note that AT&T UNIX
ksh93 uses static scoping (one global scope, one local scope per func-
tion), whereas mksh uses dynamic scoping (nested scopes of varying local-
ity). Note that special parameters (e.g. $$, $!) can't be scoped in this
way.
The exit status of a function is that of the last command executed in the
function. A function can be made to finish immediately using the return
command; this may also be used to explicitly specify the exit status.
Functions defined with the function reserved word are treated differently
in the following ways from functions defined with the () notation:
+ The $0 parameter is set to the name of the function (Bourne-style
functions leave $0 untouched).
+ Parameter assignments preceding function calls are not kept in the
shell environment (executing Bourne-style functions will keep assign-
ments).
+ OPTIND is saved/reset and restored on entry and exit from the func-
tion so getopts can be used properly both inside and outside the
function (Bourne-style functions leave OPTIND untouched, so using
getopts inside a function interferes with using getopts outside the
function).
+ Bourne-style function definitions take precedence over alias derefer-
ences and remove alias definitions upon encounter, while aliases take
precedence over Korn-style functions.
In the future, the following differences will also be added:
+ A separate trap/signal environment will be used during the execution
of functions. This will mean that traps set inside a function will
not affect the shell's traps and signals that are not ignored in the
shell (but may be trapped) will have their default effect in a func-
tion.
+ The EXIT trap, if set in a function, will be executed after the func-
tion returns.
Command execution
After evaluation of command-line arguments, redirections, and parameter
assignments, the type of command is determined: a special built-in, a
function, a regular built-in, or the name of a file to execute found us-
ing the PATH parameter. The checks are made in the above order. Special
built-in commands differ from other commands in that the PATH parameter
is not used to find them, an error during their execution can cause a
non-interactive shell to exit, and parameter assignments that are speci-
fied before the command are kept after the command completes. Regular
built-in commands are different only in that the PATH parameter is not
used to find them.
The original ksh and POSIX differ somewhat in which commands are con-
sidered special or regular:
POSIX special commands
., :, break, continue, eval, exec, exit, export, readonly, return, set,
shift, trap, unset, wait
Additional mksh special commands
builtin, global, times, typeset
Very special commands (non-POSIX)
alias, readonly, set, typeset
POSIX regular commands
alias, bg, cd, command, false, fc, fg, getopts, jobs, kill, read, true,
umask, unalias
Additional mksh regular commands
[, chdir, bind, cat, echo, let, mknod, print, printf, pwd, realpath,
rename, sleep, test, ulimit, whence
In the future, the additional mksh special and regular commands may be
treated differently from the POSIX special and regular commands.
Once the type of command has been determined, any command-line parameter
assignments are performed and exported for the duration of the command.
The following describes the special and regular built-in commands:
. file [arg ...]
This is called the "dot" command. Execute the commands in file in
the current environment. The file is searched for in the direc-
tories of PATH. If arguments are given, the positional parameters
may be used to access them while file is being executed. If no ar-
guments are given, the positional parameters are those of the en-
vironment the command is used in.
: [...]
The null command. Exit status is set to zero.
alias [-d | -t [-r] | +-x] [-p] [+] [name[=value] ...]
Without arguments, alias lists all aliases. For any name without a
value, the existing alias is listed. Any name with a value defines
an alias (see Aliases above).
When listing aliases, one of two formats is used. Normally,
aliases are listed as name=value, where value is quoted. If op-
tions were preceded with '+', or a lone '+' is given on the com-
mand line, only name is printed.
The -d option causes directory aliases which are used in tilde ex-
pansion to be listed or set (see Tilde expansion above).
If the -p option is used, each alias is prefixed with the string
"alias ".
The -t option indicates that tracked aliases are to be listed/set
(values specified on the command line are ignored for tracked
aliases). The -r option indicates that all tracked aliases are to
be reset.
The -x option sets (+x clears) the export attribute of an alias,
or, if no names are given, lists the aliases with the export at-
tribute (exporting an alias has no effect).
bg [job ...]
Resume the specified stopped job(s) in the background. If no jobs
are specified, %+ is assumed. See Job control below for more in-
formation.
bind [-l]
The current bindings are listed. If the -l flag is given, bind in-
stead lists the names of the functions to which keys may be bound.
See Emacs editing mode for more information.
bind [-m] string=[substitute] ...
bind string=[editing-command] ...
The specified editing command is bound to the given string, which
should consist of a control character optionally preceded by one
of the two prefix characters and optionally succeded by a tilde
character. Future input of the string will cause the editing com-
mand to be immediately invoked. If the -m flag is given, the
specified input string will afterwards be immediately replaced by
the given substitute string which may contain editing commands but
not other macros. If a tilde postfix is given, a tilde trailing
the one or two prefices and the control character is ignored, any
other trailing character will be processed afterwards.
Control characters may be written using caret notation i.e. ^X
represents Ctrl-X. Note that although only two prefix characters
(usually ESC and ^X) are supported, some multi-character sequences
can be supported.
The following default bindings show how the arrow keys, the home,
end and delete key on a BSD wsvt25, xterm-xfree86 or GNU screen
terminal are bound (of course some escape sequences won't work out
quite this nicely):
bind '^X'=prefix-2
bind '^[['=prefix-2
bind '^XA'=up-history
bind '^XB'=down-history
bind '^XC'=forward-char
bind '^XD'=backward-char
bind '^X1~'=beginning-of-line
bind '^X7~'=beginning-of-line
bind '^XH'=beginning-of-line
bind '^X4~'=end-of-line
bind '^X8~'=end-of-line
bind '^XF'=end-of-line
bind '^X3~'=delete-char-forward
break [level]
Exit the levelth inner-most for, select, until, or while loop.
level defaults to 1.
builtin [--] command [arg ...]
Execute the built-in command command.
cat [-u] [file ...]
Read files sequentially, in command line order, and write them to
standard output. If a file is a single dash ('-') or absent, read
from standard input. Unless compiled with MKSH_NO_EXTERNAL_CAT, if
any options are given, an external cat(1) utility is invoked in-
stead if called from the shell. For direct builtin calls, the
POSIX -u option is supported as a no-op.
cd [-L] [dir]
cd -P [-e] [dir]
chdir [-eLP] [dir]
Set the working directory to dir. If the parameter CDPATH is set,
it lists the search path for the directory containing dir. A NULL
path means the current directory. If dir is found in any component
of the CDPATH search path other than the NULL path, the name of
the new working directory will be written to standard output. If
dir is missing, the home directory HOME is used. If dir is '-',
the previous working directory is used (see the OLDPWD parameter).
If the -L option (logical path) is used or if the physical option
isn't set (see the set command below), references to '..' in dir
are relative to the path used to get to the directory. If the -P
option (physical path) is used or if the physical option is set,
'..' is relative to the filesystem directory tree. The PWD and
OLDPWD parameters are updated to reflect the current and old work-
ing directory, respectively. If the -e option is set for physical
filesystem traversal, and PWD could not be set, the exit code is
1; greater than 1 if an error occurred, 0 otherwise.
cd [-eLP] old new
chdir [-eLP] old new
The string new is substituted for old in the current directory,
and the shell attempts to change to the new directory.
command [-pVv] cmd [arg ...]
If neither the -v nor -V option is given, cmd is executed exactly
as if command had not been specified, with two exceptions: first-
ly, cmd cannot be a shell function; and secondly, special built-in
commands lose their specialness (i.e. redirection and utility er-
rors do not cause the shell to exit, and command assignments are
not permanent).
If the -p option is given, a default search path is used instead
of the current value of PATH, the actual value of which is system
dependent.
If the -v option is given, instead of executing cmd, information
about what would be executed is given (and the same is done for
arg ...). For special and regular built-in commands and functions,
their names are simply printed; for aliases, a command that de-
fines them is printed; and for commands found by searching the
PATH parameter, the full path of the command is printed. If no
command is found (i.e. the path search fails), nothing is printed
and command exits with a non-zero status. The -V option is like
the -v option, except it is more verbose.
continue [level]
Jumps to the beginning of the levelth inner-most for, select,
until, or while loop. level defaults to 1.
echo [-Een] [arg ...]
Warning: this utility is not portable; use the Korn shell builtin
print or the much slower POSIX utility printf instead.
Prints its arguments (separated by spaces) followed by a newline,
to the standard output. The newline is suppressed if any of the
arguments contain the backslash sequence '\c'. See the print com-
mand below for a list of other backslash sequences that are recog-
nised.
The options are provided for compatibility with BSD shell scripts.
The -n option suppresses the trailing newline, -e enables
backslash interpretation (a no-op, since this is normally done),
and -E suppresses backslash interpretation.
If the posix or sh option is set or this is a direct builtin call,
only the first argument is treated as an option, and only if it is
exactly "-n". Backslash interpretation is disabled.
eval command ...
The arguments are concatenated (with spaces between them) to form
a single string which the shell then parses and executes in the
current environment.
exec [command [arg ...]]
The command is executed without forking, replacing the shell pro-
cess.
If no command is given except for I/O redirection, the I/O
redirection is permanent and the shell is not replaced. Any file
descriptors greater than 2 which are opened or dup(2)'d in this
way are not made available to other executed commands (i.e. com-
mands that are not built-in to the shell). Note that the Bourne
shell differs here; it does pass these file descriptors on.
exit [status]
The shell exits with the specified exit status. If status is not
specified, the exit status is the current value of the $? parame-
ter.
export [-p] [parameter[=value]]
Sets the export attribute of the named parameters. Exported param-
eters are passed in the environment to executed commands. If
values are specified, the named parameters are also assigned.
If no parameters are specified, the names of all parameters with
the export attribute are printed one per line, unless the -p op-
tion is used, in which case export commands defining all exported
parameters, including their values, are printed.
false A command that exits with a non-zero status.
fc [-e editor | -l [-n]] [-r] [first [last]]
first and last select commands from the history. Commands can be
selected by history number or a string specifying the most recent
command starting with that string. The -l option lists the command
on standard output, and -n inhibits the default command numbers.
The -r option reverses the order of the list. Without -l, the
selected commands are edited by the editor specified with the -e
option, or if no -e is specified, the editor specified by the
FCEDIT parameter (if this parameter is not set, /bin/ed is used),
and then executed by the shell.
fc -e - | -s [-g] [old=new] [prefix]
Re-execute the selected command (the previous command by default)
after performing the optional substitution of old with new. If -g
is specified, all occurrences of old are replaced with new. The
meaning of -e - and -s is identical: re-execute the selected com-
mand without invoking an editor. This command is usually accessed
with the predefined alias r='fc -e -' or by prefixing an interac-
tive mode input line with '!' (wbx extension).
fg [job ...]
Resume the specified job(s) in the foreground. If no jobs are
specified, %+ is assumed. See Job control below for more informa-
tion.
getopts optstring name [arg ...]
Used by shell procedures to parse the specified arguments (or po-
sitional parameters, if no arguments are given) and to check for
legal options. optstring contains the option letters that getopts
is to recognise. If a letter is followed by a colon, the option is
expected to have an argument. Options that do not take arguments
may be grouped in a single argument. If an option takes an argu-
ment and the option character is not the last character of the ar-
gument it is found in, the remainder of the argument is taken to
be the option's argument; otherwise, the next argument is the
option's argument.
Each time getopts is invoked, it places the next option in the
shell parameter name and the index of the argument to be processed
by the next call to getopts in the shell parameter OPTIND. If the
option was introduced with a '+', the option placed in name is
prefixed with a '+'. When an option requires an argument, getopts
places it in the shell parameter OPTARG.
When an illegal option or a missing option argument is encoun-
tered, a question mark or a colon is placed in name (indicating an
illegal option or missing argument, respectively) and OPTARG is
set to the option character that caused the problem. Furthermore,
if optstring does not begin with a colon, a question mark is
placed in name, OPTARG is unset, and an error message is printed
to standard error.
When the end of the options is encountered, getopts exits with a
non-zero exit status. Options end at the first (non-option argu-
ment) argument that does not start with a '-', or when a '--' ar-
gument is encountered.
Option parsing can be reset by setting OPTIND to 1 (this is done
automatically whenever the shell or a shell procedure is invoked).
Warning: Changing the value of the shell parameter OPTIND to a
value other than 1, or parsing different sets of arguments without
resetting OPTIND, may lead to unexpected results.
hash [-r] [name ...]
Without arguments, any hashed executable command pathnames are
listed. The -r option causes all hashed commands to be removed
from the hash table. Each name is searched as if it were a command
name and added to the hash table if it is an executable command.
jobs [-lnp] [job ...]
Display information about the specified job(s); if no jobs are
specified, all jobs are displayed. The -n option causes informa-
tion to be displayed only for jobs that have changed state since
the last notification. If the -l option is used, the process ID of
each process in a job is also listed. The -p option causes only
the process group of each job to be printed. See Job control below
for the format of job and the displayed job.
kill [-s signame | -signum | -signame] { job | pid | pgrp } ...
Send the specified signal to the specified jobs, process IDs, or
process groups. If no signal is specified, the TERM signal is
sent. If a job is specified, the signal is sent to the job's pro-
cess group. See Job control below for the format of job.
kill -l [exit-status ...]
Print the signal name corresponding to exit-status. If no argu-
ments are specified, a list of all the signals, their numbers, and
a short description of them are printed.
let [expression ...]
Each expression is evaluated (see Arithmetic expressions above).
If all expressions are successfully evaluated, the exit status is
0 (1) if the last expression evaluated to non-zero (zero). If an
error occurs during the parsing or evaluation of an expression,
the exit status is greater than 1. Since expressions may need to
be quoted, (( expr )) is syntactic sugar for let "expr".
mknod [-m mode] name b|c major minor
mknod [-m mode] name p
Create a device special file. The file type may be b (block type
device), c (character type device), or p (named pipe). The file
created may be modified according to its mode (via the -m option),
major (major device number), and minor (minor device number).
See mknod(8) for further information.
print [-nprsu[n] | -R [-en]] [argument ...]
print prints its arguments on the standard output, separated by
spaces and terminated with a newline. The -n option suppresses the
newline. By default, certain C escapes are translated. These in-
clude these mentioned in Backslash expansion above, as well as
'\c', which is equivalent to using the -n option. Backslash expan-
sion may be inhibited with the -r option. The -s option prints to
the history file instead of standard output; the -u option prints
to file descriptor n (n defaults to 1 if omitted); and the -p op-
tion prints to the co-process (see Co-processes above).
The -R option is used to emulate, to some degree, the BSD echo(1)
command which does not process '\' sequences unless the -e option
is given. As above, the -n option suppresses the trailing newline.
printf format [arguments ...]
Formatted output. Approximately the same as the utility printf,
except that it uses the same Backslash expansion and I/O code as
the rest of mksh. This is not normally part of mksh; however, dis-
tributors may have added this as builtin as a speed hack.
pwd [-LP]
Print the present working directory. If the -L option is used or
if the physical option isn't set (see the set command below), the
logical path is printed (i.e. the path used to cd to the current
directory). If the -P option (physical path) is used or if the
physical option is set, the path determined from the filesystem
(by following '..' directories to the root directory) is printed.
read [-A | -a] [-d x] [-N z | -n z] [-p | -u[n]] [-t n] [-rs] [p ...]
Reads a line of input, separates the input into fields using the
IFS parameter (see Substitution above), and assigns each field to
the specified parameters p. If no parameters are specified, the
REPLY parameter is used to store the result. With the -A and -a
options, only no or one parameter is accepted. If there are more
parameters than fields, the extra parameters are set to the empty
string or 0; if there are more fields than parameters, the last
parameter is assigned the remaining fields (including the word
separators).
The options are as follows:
-A Store the result into the parameter p (or REPLY) as array
of words.
-a Store the result without word splitting into the parameter
p (or REPLY) as array of characters (wide characters if the
utf8-mode option is enacted, octets otherwise).
-d x Use the first byte of x, NUL if empty, instead of the ASCII
newline character as input line delimiter.
-N z Instead of reading till end-of-line, read exactly z bytes;
less if EOF or a timeout occurs.
-n z Instead of reading till end-of-line, read up to z bytes but
return as soon as any bytes are read, e.g. from a slow ter-
minal device, or if EOF or a timeout occurs.
-p Read from the currently active co-process, see Co-processes
above for details on this.
-u[n] Read from the file descriptor n (defaults to 0, i.e. stan-
dard input). The argument must immediately follow the op-
tion character.
-t n Interrupt reading after n seconds (specified as positive
decimal value with an optional fractional part).
-r Normally, the ASCII backslash character escapes the special
meaning of the following character and is stripped from the
input; read does not stop when encountering a backslash-
newline sequence and does not store that newline in the
result. This option enables raw mode, in which backslashes
are not processed.
-s The input line is saved to the history.
If the input is a terminal, both the -N and -n options set it into
raw mode; they read an entire file if -1 is passed as z argument.
The first parameter may have a question mark and a string appended
to it, in which case the string is used as a prompt (printed to
standard error before any input is read) if the input is a tty(4)
(e.g. read nfoo?'number of foos: ').
If no input is read or a timeout occurred, read exits with a non-
zero status.
Another handy set of tricks: If read is run in a loop such as
while read foo; do ...; done then leading whitespace will be re-
moved (IFS) and backslashes processed. You might want to use while
IFS= read -r foo; do ...; done for pristine I/O. Similarily, when
using the -a option, use of the -r option might be prudent; the
same applies for:
find . -type f -print0 | \
while IFS= read -d '' -r filename; do
print -r -- "found <${filename#./}>"
done
The inner loop will be executed in a subshell and variable changes
cannot be propagated if executed in a pipeline:
bar | baz | while read foo; do ...; done
Use co-processes instead:
bar | baz |&
while read -p foo; do ...; done
exec 3>&p; exec 3>&-
readonly [-p] [parameter[=value] ...]
Sets the read-only attribute of the named parameters. If values
are given, parameters are set to them before setting the attri-
bute. Once a parameter is made read-only, it cannot be unset and
its value cannot be changed.
If no parameters are specified, the names of all parameters with
the read-only attribute are printed one per line, unless the -p
option is used, in which case readonly commands defining all
read-only parameters, including their values, are printed.
realpath [--] name
Prints the resolved absolute pathname corresponding to name. If
name ends with a slash ('/'), it's also checked for existence and
whether it is a directory; otherwise, realpath returns 0 if the
pathname either exists or can be created immediately, i.e. all but
the last component exist and are directories.
rename [--] from to
Renames the file from to to. Both must be complete pathnames and
on the same device. This builtin is intended for emergency situa-
tions where /bin/mv becomes unusable, and directly calls
rename(2).
return [status]
Returns from a function or . script, with exit status status. If
no status is given, the exit status of the last executed command
is used. If used outside of a function or . script, it has the
same effect as exit. Note that mksh treats both profile and ENV
files as . scripts, while the original Korn shell only treats pro-
files as . scripts.
set [+-abCefhiklmnprsUuvXx] [+-o option] [+-A name] [--] [arg ...]
The set command can be used to set (-) or clear (+) shell options,
set the positional parameters, or set an array parameter. Options
can be changed using the +-o option syntax, where option is the
long name of an option, or using the +-letter syntax, where letter
is the option's single letter name (not all options have a single
letter name). The following table lists both option letters (if
they exist) and long names along with a description of what the
option does:
-A name
Sets the elements of the array parameter name to arg ... If
-A is used, the array is reset (i.e. emptied) first; if +A is
used, the first N elements are set (where N is the number of
arguments); the rest are left untouched.
An alternative syntax for the command set -A foo -- a b c
which is compatible to GNU bash and also supported by AT&T
UNIX ksh93 is: foo=(a b c); foo+=(d e)
Another AT&T UNIX ksh93 and GNU bash extension allows speci-
fying the indices used for arg ... (from the above example, a
b c) like this: set -A foo -- [0]=a [1]=b [2]=c or foo=([0]=a
[1]=b [2]=c) which can also be written foo=([0]=a b c) be-
cause indices are incremented automatically.
-a | -o allexport
All new parameters are created with the export attribute.
-b | -o notify
Print job notification messages asynchronously, instead of
just before the prompt. Only used if job control is enabled
(-m).
-C | -o noclobber
Prevent > redirection from overwriting existing files. In-
stead, >| must be used to force an overwrite.
-e | -o errexit
Exit (after executing the ERR trap) as soon as an error oc-
curs or a command fails (i.e. exits with a non-zero status).
This does not apply to commands whose exit status is expli-
citly tested by a shell construct such as if, until, while,
&&, ||, or ! statements.
-f | -o noglob
Do not expand file name patterns.
-h | -o trackall
Create tracked aliases for all executed commands (see Aliases
above). Enabled by default for non-interactive shells.
-i | -o interactive
The shell is an interactive shell. This option can only be
used when the shell is invoked. See above for a description
of what this means.
-k | -o keyword
Parameter assignments are recognised anywhere in a command.
-l | -o login
The shell is a login shell. This option can only be used when
the shell is invoked. See above for a description of what
this means.
-m | -o monitor
Enable job control (default for interactive shells).
-n | -o noexec
Do not execute any commands. Useful for checking the syntax
of scripts (ignored if interactive).
-p | -o privileged
The shell is a privileged shell. It is set automatically if,
when the shell starts, the real UID or GID does not match the
effective UID (EUID) or GID (EGID), respectively. See above
for a description of what this means.
-r | -o restricted
The shell is a restricted shell. This option can only be used
when the shell is invoked. See above for a description of
what this means.
-s | -o stdin
If used when the shell is invoked, commands are read from
standard input. Set automatically if the shell is invoked
with no arguments.
When -s is used with the set command it causes the specified
arguments to be sorted before assigning them to the position-
al parameters (or to array name, if -A is used).
-U | -o utf8-mode
Enable UTF-8 support in the Emacs editing mode and internal
string handling functions. This flag is disabled by default,
but can be enabled by setting it on the shell command line;
is enabled automatically for interactive shells if requested
at compile time, your system supports setlocale(LC_CTYPE, "")
and optionally nl_langinfo(CODESET), or the LC_ALL, LC_CTYPE,
or LANG environment variables, and at least one of these re-
turns something that matches "UTF-8" or "utf8" case-
insensitively; for direct builtin calls depending on the
aforementioned environment variables; or for stdin or
scripts, if the input begins with a UTF-8 Byte Order Mark.
-u | -o nounset
Referencing of an unset parameter, other than "$@" or "$*",
is treated as an error, unless one of the '-', '+', or '='
modifiers is used.
-v | -o verbose
Write shell input to standard error as it is read.
-X | -o markdirs
Mark directories with a trailing '/' during file name genera-
tion.
-x | -o xtrace
Print commands and parameter assignments when they are exe-
cuted, preceded by the value of PS4.
-o bgnice
Background jobs are run with lower priority.
-o braceexpand
Enable brace expansion (a.k.a. alternation). This is enabled
by default. If disabled, tilde expansion after an equals sign
is disabled as a side effect.
-o emacs
Enable BRL emacs-like command-line editing (interactive
shells only); see Emacs editing mode.
-o gmacs
Enable gmacs-like command-line editing (interactive shells
only). Currently identical to emacs editing except that
transpose-chars (^T) acts slightly differently.
-o ignoreeof
The shell will not (easily) exit when end-of-file is read;
exit must be used. To avoid infinite loops, the shell will
exit if EOF is read 13 times in a row.
-o nohup
Do not kill running jobs with a SIGHUP signal when a login
shell exits. Currently set by default, but this may change in
the future to be compatible with AT&T UNIX ksh, which doesn't
have this option, but does send the SIGHUP signal.
-o nolog
No effect. In the original Korn shell, this prevents function
definitions from being stored in the history file.
-o physical
Causes the cd and pwd commands to use "physical" (i.e. the
filesystem's) '..' directories instead of "logical" direc-
tories (i.e. the shell handles '..', which allows the user to
be oblivious of symbolic links to directories). Clear by de-
fault. Note that setting this option does not affect the
current value of the PWD parameter; only the cd command
changes PWD. See the cd and pwd commands above for more de-
tails.
-o posix
Enable a somewhat more POSIXish mode. As a side effect, set-
ting this flag turns off braceexpand mode, which can be
turned back on manually, and sh mode.
-o sh
Enable /bin/sh (kludge) mode. Automatically enabled if the
basename of the shell invocation begins with "sh" and this
autodetection feature is compiled in (not in MirBSD). As a
side effect, setting this flag turns off braceexpand mode,
which can be turned back on manually, and posix mode.
-o vi
Enable vi(1)-like command-line editing (interactive shells
only).
-o vi-esccomplete
In vi command-line editing, do command and file name comple-
tion when escape (^[) is entered in command mode.
-o vi-tabcomplete
In vi command-line editing, do command and file name comple-
tion when tab (^I) is entered in insert mode. This is the de-
fault.
-o viraw
No effect. In the original Korn shell, unless viraw was set,
the vi command-line mode would let the tty(4) driver do the
work until ESC (^[) was entered. mksh is always in viraw
mode.
These options can also be used upon invocation of the shell. The
current set of options (with single letter names) can be found in
the parameter '$-'. set -o with no option name will list all the
options and whether each is on or off; set +o will print the long
names of all options that are currently on.
Remaining arguments, if any, are positional parameters and are as-
signed, in order, to the positional parameters (i.e. $1, $2,
etc.). If options end with '--' and there are no remaining argu-
ments, all positional parameters are cleared. If no options or ar-
guments are given, the values of all names are printed. For unk-
nown historical reasons, a lone '-' option is treated specially -
it clears both the -v and -x options.
shift [number]
The positional parameters number+1, number+2, etc. are renamed to
'1', '2', etc. number defaults to 1.
sleep seconds
Suspends execution for a minimum of the seconds specified as posi-
tive decimal value with an optional fractional part. Signal
delivery may continue execution earlier.
source file [arg ...]
Like . ("dot"), except that the current working directory is ap-
pended to the PATH in GNU bash and mksh. In ksh93 and mksh, this
is implemented as a shell alias instead of a builtin.
test expression
[ expression ]
test evaluates the expression and returns zero status if true, 1
if false, or greater than 1 if there was an error. It is normally
used as the condition command of if and while statements. Symbolic
links are followed for all file expressions except -h and -L.
The following basic expressions are available:
-a file
file exists.
-b file
file is a block special device.
-c file
file is a character special device.
-d file
file is a directory.
-e file
file exists.
-f file
file is a regular file.
-G file
file's group is the shell's effective group ID.
-g file
file's mode has the setgid bit set.
-H file
file is a context dependent directory (only useful on HP-UX).
-h file
file is a symbolic link.
-k file
file's mode has the sticky(8) bit set.
-L file
file is a symbolic link.
-O file
file's owner is the shell's effective user ID.
-o option
Shell option is set (see the set command above for a list of
options). As a non-standard extension, if the option starts
with a '!', the test is negated; the test always fails if
option doesn't exist (so [ -o foo -o -o !foo ] returns true
if and only if option foo exists). The same can be achieved
with [ -o ?foo ] like in AT&T UNIX ksh93. option can also be
the short flag led by either '-' or '+' (no logical
negation), for example '-x' or '+x' instead of 'xtrace'.
-p file
file is a named pipe.
-r file
file exists and is readable.
-S file
file is a unix(4)-domain socket.
-s file
file is not empty.
-t fd
File descriptor fd is a tty(4) device.
-u file
file's mode has the setuid bit set.
-w file
file exists and is writable.
-x file
file exists and is executable.
file1 -nt file2
file1 is newer than file2 or file1 exists and file2 does not.
file1 -ot file2
file1 is older than file2 or file2 exists and file1 does not.
file1 -ef file2
file1 is the same file as file2.
string
string has non-zero length.
-n string
string is not empty.
-z string
string is empty.
string = string
Strings are equal.
string == string
Strings are equal.
string > string
First string operand is greater than second string operand.
string < string
First string operand is less than second string operand.
string != string
Strings are not equal.
number -eq number
Numbers compare equal.
number -ne number
Numbers compare not equal.
number -ge number
Numbers compare greater than or equal.
number -gt number
Numbers compare greater than.
number -le number
Numbers compare less than or equal.
number -lt number
Numbers compare less than.
The above basic expressions, in which unary operators have pre-
cedence over binary operators, may be combined with the following
operators (listed in increasing order of precedence):
expr -o expr Logical OR.
expr -a expr Logical AND.
! expr Logical NOT.
( expr ) Grouping.
Note that a number actually may be an arithmetic expression, such
as a mathematical term or the name of an integer variable:
x=1; [ "x" -eq 1 ] evaluates to true
Note that some special rules are applied (courtesy of POSIX) if
the number of arguments to test or [ ... ] is less than five: if
leading '!' arguments can be stripped such that only one argument
remains then a string length test is performed (again, even if the
argument is a unary operator); if leading '!' arguments can be
stripped such that three arguments remain and the second argument
is a binary operator, then the binary operation is performed (even
if the first argument is a unary operator, including an unstripped
'!').
Note: A common mistake is to use "if [ $foo = bar ]" which fails
if parameter "foo" is NULL or unset, if it has embedded spaces
(i.e. IFS octets), or if it is a unary operator like '!' or '-n'.
Use tests like "if [ x"$foo" = x"bar" ]" instead, or the double-
bracket operator "if [[ $foo = bar ]]" or, to avoid pattern match-
ing (see [[ above): "if [[ $foo = $bar ]]"
time [-p] [pipeline]
If a pipeline is given, the times used to execute the pipeline are
reported. If no pipeline is given, then the user and system time
used by the shell itself, and all the commands it has run since it
was started, are reported. The times reported are the real time
(elapsed time from start to finish), the user CPU time (time spent
running in user mode), and the system CPU time (time spent running
in kernel mode). Times are reported to standard error; the format
of the output is:
0m0.00s real 0m0.00s user 0m0.00s system
If the -p option is given the output is slightly longer:
real 0.00
user 0.00
sys 0.00
It is an error to specify the -p option unless pipeline is a sim-
ple command.
Simple redirections of standard error do not affect the output of
the time command:
$ time sleep 1 2>afile
$ { time sleep 1; } 2>afile
Times for the first command do not go to "afile", but those of the
second command do.
times Print the accumulated user and system times used both by the shell
and by processes that the shell started which have exited. The
format of the output is:
0m0.00s 0m0.00s
0m0.00s 0m0.00s
trap [handler signal ...]
Sets a trap handler that is to be executed when any of the speci-
fied signals are received. handler is either a NULL string, indi-
cating the signals are to be ignored, a minus sign ('-'), indicat-
ing that the default action is to be taken for the signals (see
signal(3)), or a string containing shell commands to be evaluated
and executed at the first opportunity (i.e. when the current com-
mand completes, or before printing the next PS1 prompt) after re-
ceipt of one of the signals. signal is the name of a signal (e.g.
PIPE or ALRM) or the number of the signal (see the kill -l command
above).
There are two special signals: EXIT (also known as 0) which is ex-
ecuted when the shell is about to exit, and ERR, which is executed
after an error occurs (an error is something that would cause the
shell to exit if the -e or errexit option were set - see the set
command above). EXIT handlers are executed in the environment of
the last executed command. Note that for non-interactive shells,
the trap handler cannot be changed for signals that were ignored
when the shell started.
With no arguments, trap lists, as a series of trap commands, the
current state of the traps that have been set since the shell
started. Note that the output of trap cannot be usefully piped to
another process (an artifact of the fact that traps are cleared
when subprocesses are created).
The original Korn shell's DEBUG trap and the handling of ERR and
EXIT traps in functions are not yet implemented.
true A command that exits with a zero value.
global [[+-alpnrtUux] [-L[n]] [-R[n]] [-Z[n]] [-i[n]] | -f [-tux]]
[name[=value] ...]
typeset [[+-alpnrtUux] [-LRZ[n]] [-i[n]] | -f [-tux]] [name[=value] ...]
Display or set parameter attributes. With no name arguments,
parameter attributes are displayed; if no options are used, the
current attributes of all parameters are printed as typeset com-
mands; if an option is given (or '-' with no option letter), all
parameters and their values with the specified attributes are
printed; if options are introduced with '+', parameter values are
not printed.
If name arguments are given, the attributes of the named parame-
ters are set (-) or cleared (+). Values for parameters may option-
ally be specified. For name[*], the change affects the entire ar-
ray, and no value may be specified.
If typeset is used inside a function, any parameters specified are
localised. This is not done by the otherwise identical global.
When -f is used, typeset operates on the attributes of functions.
As with parameters, if no name arguments are given, functions are
listed with their values (i.e. definitions) unless options are in-
troduced with '+', in which case only the function names are re-
ported.
-a Indexed array attribute.
-f Function mode. Display or set functions and their attri-
butes, instead of parameters.
-i[n] Integer attribute. n specifies the base to use when
displaying the integer (if not specified, the base given
in the first assignment is used). Parameters with this at-
tribute may be assigned values containing arithmetic ex-
pressions.
-L[n] Left justify attribute. n specifies the field width. If n
is not specified, the current width of a parameter (or the
width of its first assigned value) is used. Leading whi-
tespace (and zeros, if used with the -Z option) is
stripped. If necessary, values are either truncated or
space padded to fit the field width.
-l Lower case attribute. All upper case characters in values
are converted to lower case. (In the original Korn shell,
this parameter meant "long integer" when used with the -i
option.)
-n Create a bound variable (name reference): any access to
the variable name will access the variable value in the
current scope (this is different from AT&T UNIX ksh93!)
instead. Also different from AT&T UNIX ksh93 is that value
is lazily evaluated at the time name is accessed. This can
be used by functions to access variables whose names are
passed as parametres, instead of using eval.
-p Print complete typeset commands that can be used to re-
create the attributes and values of parameters.
-R[n] Right justify attribute. n specifies the field width. If n
is not specified, the current width of a parameter (or the
width of its first assigned value) is used. Trailing whi-
tespace is stripped. If necessary, values are either
stripped of leading characters or space padded to make
them fit the field width.
-r Read-only attribute. Parameters with this attribute may
not be assigned to or unset. Once this attribute is set,
it cannot be turned off.
-t Tag attribute. Has no meaning to the shell; provided for
application use.
For functions, -t is the trace attribute. When functions
with the trace attribute are executed, the xtrace (-x)
shell option is temporarily turned on.
-U Unsigned integer attribute. Integers are printed as un-
signed values (combine with the -i option). This option is
not in the original Korn shell.
-u Upper case attribute. All lower case characters in values
are converted to upper case. (In the original Korn shell,
this parameter meant "unsigned integer" when used with the
-i option which meant upper case letters would never be
used for bases greater than 10. See the -U option.)
For functions, -u is the undefined attribute. See
Functions above for the implications of this.
-x Export attribute. Parameters (or functions) are placed in
the environment of any executed commands. Exported func-
tions are not yet implemented.
-Z[n] Zero fill attribute. If not combined with -L, this is the
same as -R, except zero padding is used instead of space
padding. For integers, the number instead of the base is
padded.
If any of the -i, -L, -l, -R, -U, -u, or -Z options are changed,
all others from this set are cleared, unless they are also given
on the same command line.
ulimit [-aBCcdefHiLlMmnOPpqrSsTtVvw] [value]
Display or set process limits. If no options are used, the file
size limit (-f) is assumed. value, if specified, may be either an
arithmetic expression or the word "unlimited". The limits affect
the shell and any processes created by the shell after a limit is
imposed. Note that some systems may not allow limits to be in-
creased once they are set. Also note that the types of limits
available are system dependent - some systems have only the -f
limit.
-a Display all limits; unless -H is used, soft limits are
displayed.
-B n Set the socket buffer size to n kibibytes.
-C n Set the number of cached threads to n.
-c n Impose a size limit of n blocks on the size of core dumps.
-d n Impose a size limit of n kibibytes on the size of the data
area.
-e n Set the maximum niceness to n.
-f n Impose a size limit of n blocks on files written by the
shell and its child processes (files of any size may be
read).
-H Set the hard limit only (the default is to set both hard
and soft limits).
-i n Set the number of pending signals to n.
-L n Control flocks; documentation is missing.
-l n Impose a limit of n kibibytes on the amount of locked
(wired) physical memory.
-M n Set the AIO locked memory to n kibibytes.
-m n Impose a limit of n kibibytes on the amount of physical
memory used.
-n n Impose a limit of n file descriptors that can be open at
once.
-O n Set the number of AIO operations to n.
-P n Limit the number of threads per process to n.
-p n Impose a limit of n processes that can be run by the user
at any one time.
-q n Limit the size of POSIX message queues to n bytes.
-r n Set the maximum real-time priority to n.
-S Set the soft limit only (the default is to set both hard
and soft limits).
-s n Impose a size limit of n kibibytes on the size of the stack
area.
-T n Impose a time limit of n real seconds to be used by each
process.
-t n Impose a time limit of n CPU seconds spent in user mode to
be used by each process.
-V n Set the number of vnode monitors on Haiku to n.
-v n Impose a limit of n kibibytes on the amount of virtual
memory (address space) used.
-w n Impose a limit of n kibibytes on the amount of swap space
used.
As far as ulimit is concerned, a block is 512 bytes.
umask [-S] [mask]
Display or set the file permission creation mask, or umask (see
umask(2)). If the -S option is used, the mask displayed or set is
symbolic; otherwise, it is an octal number.
Symbolic masks are like those used by chmod(1). When used, they
describe what permissions may be made available (as opposed to oc-
tal masks in which a set bit means the corresponding bit is to be
cleared). For example, "ug=rwx,o=" sets the mask so files will not
be readable, writable, or executable by "others", and is
equivalent (on most systems) to the octal mask "007".
unalias [-adt] [name ...]
The aliases for the given names are removed. If the -a option is
used, all aliases are removed. If the -t or -d options are used,
the indicated operations are carried out on tracked or directory
aliases, respectively.
unset [-fv] parameter ...
Unset the named parameters (-v, the default) or functions (-f).
With parameter[*], attributes are kept, only values are unset.
The exit status is non-zero if any of the parameters have the
read-only attribute set, zero otherwise.
wait [job ...]
Wait for the specified job(s) to finish. The exit status of wait
is that of the last specified job; if the last job is killed by a
signal, the exit status is 128 + the number of the signal (see
kill -l exit-status above); if the last specified job can't be
found (because it never existed, or had already finished), the
exit status of wait is 127. See Job control below for the format
of job. wait will return if a signal for which a trap has been set
is received, or if a SIGHUP, SIGINT, or SIGQUIT signal is re-
ceived.
If no jobs are specified, wait waits for all currently running
jobs (if any) to finish and exits with a zero status. If job moni-
toring is enabled, the completion status of jobs is printed (this
is not the case when jobs are explicitly specified).
whence [-pv] [name ...]
For each name, the type of command is listed (reserved word,
built-in, alias, function, tracked alias, or executable). If the
-p option is used, a path search is performed even if name is a
reserved word, alias, etc. Without the -v option, whence is simi-
lar to command -v except that whence will find reserved words and
won't print aliases as alias commands. With the -v option, whence
is the same as command -V. Note that for whence, the -p option
does not affect the search path used, as it does for command. If
the type of one or more of the names could not be determined, the
exit status is non-zero.
Job control
Job control refers to the shell's ability to monitor and control jobs
which are processes or groups of processes created for commands or pipe-
lines. At a minimum, the shell keeps track of the status of the back-
ground (i.e. asynchronous) jobs that currently exist; this information
can be displayed using the jobs commands. If job control is fully enabled
(using set -m or set -o monitor), as it is for interactive shells, the
processes of a job are placed in their own process group. Foreground jobs
can be stopped by typing the suspend character from the terminal (normal-
ly ^Z), jobs can be restarted in either the foreground or background us-
ing the fg and bg commands, and the state of the terminal is saved or re-
stored when a foreground job is stopped or restarted, respectively.
Note that only commands that create processes (e.g. asynchronous com-
mands, subshell commands, and non-built-in, non-function commands) can be
stopped; commands like read cannot be.
When a job is created, it is assigned a job number. For interactive
shells, this number is printed inside "[..]", followed by the process IDs
of the processes in the job when an asynchronous command is run. A job
may be referred to in the bg, fg, jobs, kill, and wait commands either by
the process ID of the last process in the command pipeline (as stored in
the $! parameter) or by prefixing the job number with a percent sign
('%'). Other percent sequences can also be used to refer to jobs:
%+ | %% | % The most recently stopped job, or, if there are no stopped
jobs, the oldest running job.
%- The job that would be the %+ job if the latter did not ex-
ist.
%n The job with job number n.
%?string The job with its command containing the string string (an
error occurs if multiple jobs are matched).
%string The job with its command starting with the string string
(an error occurs if multiple jobs are matched).
When a job changes state (e.g. a background job finishes or foreground
job is stopped), the shell prints the following status information:
[number] flag status command
where...
number is the job number of the job;
flag is the '+' or '-' character if the job is the %+ or %- job,
respectively, or space if it is neither;
status indicates the current state of the job and can be:
Done [number]
The job exited. number is the exit status of the job
which is omitted if the status is zero.
Running The job has neither stopped nor exited (note that
running does not necessarily mean consuming CPU time
- the process could be blocked waiting for some
event).
Stopped [signal]
The job was stopped by the indicated signal (if no
signal is given, the job was stopped by SIGTSTP).
signal-description ["core dumped"]
The job was killed by a signal (e.g. memory fault,
hangup); use kill -l for a list of signal descrip-
tions. The "core dumped" message indicates the pro-
cess created a core file.
command is the command that created the process. If there are multiple
processes in the job, each process will have a line showing its
command and possibly its status, if it is different from the
status of the previous process.
When an attempt is made to exit the shell while there are jobs in the
stopped state, the shell warns the user that there are stopped jobs and
does not exit. If another attempt is immediately made to exit the shell,
the stopped jobs are sent a SIGHUP signal and the shell exits. Similarly,
if the nohup option is not set and there are running jobs when an attempt
is made to exit a login shell, the shell warns the user and does not
exit. If another attempt is immediately made to exit the shell, the run-
ning jobs are sent a SIGHUP signal and the shell exits.
Interactive input line editing
The shell supports three modes of reading command lines from a tty(4) in
an interactive session, controlled by the emacs, gmacs, and vi options
(at most one of these can be set at once). The default is emacs. Editing
modes can be set explicitly using the set built-in. If none of these op-
tions are enabled, the shell simply reads lines using the normal tty(4)
driver. If the emacs or gmacs option is set, the shell allows emacs-like
editing of the command; similarly, if the vi option is set, the shell al-
lows vi-like editing of the command. These modes are described in detail
in the following sections.
In these editing modes, if a line is longer than the screen width (see
the COLUMNS parameter), a '>', '+', or '<' character is displayed in the
last column indicating that there are more characters after, before and
after, or before the current position, respectively. The line is scrolled
horizontally as necessary.
Completed lines are pushed into the history, unless they begin with an
IFS octet or IFS white space, or are the same as the previous line.
Emacs editing mode
When the emacs option is set, interactive input line editing is enabled.
Warning: This mode is slightly different from the emacs mode in the ori-
ginal Korn shell. In this mode, various editing commands (typically bound
to one or more control characters) cause immediate actions without wait-
ing for a newline. Several editing commands are bound to particular con-
trol characters when the shell is invoked; these bindings can be changed
using the bind command.
The following is a list of available editing commands. Each description
starts with the name of the command, suffixed with a colon; an [n] (if
the command can be prefixed with a count); and any keys the command is
bound to by default, written using caret notation e.g. the ASCII ESC
character is written as ^[. These control sequences are not case sensi-
tive. A count prefix for a command is entered using the sequence ^[n,
where n is a sequence of 1 or more digits. Unless otherwise specified, if
a count is omitted, it defaults to 1.
Note that editing command names are used only with the bind command.
Furthermore, many editing commands are useful only on terminals with a
visible cursor. The default bindings were chosen to resemble correspond-
ing Emacs key bindings. The user's tty(4) characters (e.g. ERASE) are
bound to reasonable substitutes and override the default bindings.
abort: ^C, ^G
Abort the current command, empty the line buffer and set the exit
state to interrupted.
auto-insert: [n]
Simply causes the character to appear as literal input. Most or-
dinary characters are bound to this.
backward-char: [n] ^B, ^XD, ANSI-CurLeft
Moves the cursor backward n characters.
backward-word: [n] ^[b, ANSI-Ctrl-CurLeft, ANSI-Alt-CurLeft
Moves the cursor backward to the beginning of the word; words
consist of alphanumerics, underscore ('_'), and dollar sign ('$')
characters.
beginning-of-history: ^[<
Moves to the beginning of the history.
beginning-of-line: ^A, ANSI-Home
Moves the cursor to the beginning of the edited input line.
capitalise-word: [n] ^[C, ^[c
Uppercase the first character in the next n words, leaving the
cursor past the end of the last word.
clear-screen: ^[^L
Prints a compile-time configurable sequence to clear the screen
and home the cursor, redraws the entire prompt and the currently
edited input line. The default sequence works for almost all
standard terminals.
comment: ^[#
If the current line does not begin with a comment character, one
is added at the beginning of the line and the line is entered (as
if return had been pressed); otherwise, the existing comment
characters are removed and the cursor is placed at the beginning
of the line.
complete: ^[^[
Automatically completes as much as is unique of the command name
or the file name containing the cursor. If the entire remaining
command or file name is unique, a space is printed after its com-
pletion, unless it is a directory name in which case '/' is ap-
pended. If there is no command or file name with the current par-
tial word as its prefix, a bell character is output (usually
causing a beep to be sounded).
complete-command: ^X^[
Automatically completes as much as is unique of the command name
having the partial word up to the cursor as its prefix, as in the
complete command above.
complete-file: ^[^X
Automatically completes as much as is unique of the file name
having the partial word up to the cursor as its prefix, as in the
complete command described above.
complete-list: ^I, ^[=
Complete as much as is possible of the current word, and list the
possible completions for it. If only one completion is possible,
match as in the complete command above. Note that ^I is usually
generated by the TAB (tabulator) key.
delete-char-backward: [n] ERASE, ^?, ^H
Deletes n characters before the cursor.
delete-char-forward: [n] ANSI-Del
Deletes n characters after the cursor.
delete-word-backward: [n] WERASE, ^[^?, ^[^H, ^[h
Deletes n words before the cursor.
delete-word-forward: [n] ^[d
Deletes characters after the cursor up to the end of n words.
down-history: [n] ^N, ^XB, ANSI-CurDown
Scrolls the history buffer forward n lines (later). Each input
line originally starts just after the last entry in the history
buffer, so down-history is not useful until either
search-history, search-history-up or up-history has been per-
formed.
downcase-word: [n] ^[L, ^[l
Lowercases the next n words.
edit-line: [n] ^Xe
Edit line n or the current line, if not specified, interactively.
The actual command executed is fc -e ${VISUAL:-${EDITOR:-vi}} n.
end-of-history: ^[>
Moves to the end of the history.
end-of-line: ^E, ANSI-End
Moves the cursor to the end of the input line.
eot: ^_
Acts as an end-of-file; this is useful because edit-mode input
disables normal terminal input canonicalization.
eot-or-delete: [n] ^D
Acts as eot if alone on a line; otherwise acts as
delete-char-forward.
error: (not bound)
Error (ring the bell).
exchange-point-and-mark: ^X^X
Places the cursor where the mark is and sets the mark to where
the cursor was.
expand-file: ^[*
Appends a '*' to the current word and replaces the word with the
result of performing file globbing on the word. If no files match
the pattern, the bell is rung.
forward-char: [n] ^F, ^XC, ANSI-CurRight
Moves the cursor forward n characters.
forward-word: [n] ^[f, ANSI-Ctrl-CurRight, ANSI-Alt-CurRight
Moves the cursor forward to the end of the nth word.
goto-history: [n] ^[g
Goes to history number n.
kill-line: KILL
Deletes the entire input line.
kill-region: ^W
Deletes the input between the cursor and the mark.
kill-to-eol: [n] ^K
Deletes the input from the cursor to the end of the line if n is
not specified; otherwise deletes characters between the cursor
and column n.
list: ^[?
Prints a sorted, columnated list of command names or file names
(if any) that can complete the partial word containing the cur-
sor. Directory names have '/' appended to them.
list-command: ^X?
Prints a sorted, columnated list of command names (if any) that
can complete the partial word containing the cursor.
list-file: ^X^Y
Prints a sorted, columnated list of file names (if any) that can
complete the partial word containing the cursor. File type indi-
cators are appended as described under list above.
newline: ^J, ^M
Causes the current input line to be processed by the shell. The
current cursor position may be anywhere on the line.
newline-and-next: ^O
Causes the current input line to be processed by the shell, and
the next line from history becomes the current line. This is only
useful after an up-history, search-history or search-history-up.
no-op: QUIT
This does nothing.
prefix-1: ^[
Introduces a 2-character command sequence.
prefix-2: ^X, ^[[, ^[O
Introduces a 2-character command sequence.
prev-hist-word: [n] ^[., ^[_
The last word, or, if given, the nth word (zero-based) of the
previous (on repeated execution, second-last, third-last, etc.)
command is inserted at the cursor. Use of this editing command
trashes the mark.
quote: ^^, ^V
The following character is taken literally rather than as an
editing command.
redraw: ^L
Reprints the last line of the prompt string and the current input
line on a new line.
search-character-backward: [n] ^[^]
Search backward in the current line for the nth occurrence of the
next character typed.
search-character-forward: [n] ^]
Search forward in the current line for the nth occurrence of the
next character typed.
search-history: ^R
Enter incremental search mode. The internal history list is
searched backwards for commands matching the input. An initial
'^' in the search string anchors the search. The escape key will
leave search mode. Other commands, including sequences of escape
as prefix-1 followed by a prefix-1 or prefix-2 key will be exe-
cuted after leaving search mode. The abort (^G) command will re-
store the input line before search started. Successive
search-history commands continue searching backward to the next
previous occurrence of the pattern. The history buffer retains
only a finite number of lines; the oldest are discarded as neces-
sary.
search-history-up: ANSI-PgUp
Search backwards through the history buffer for commands whose
beginning match the portion of the input line before the cursor.
When used on an empty line, this has the same effect as
up-history.
search-history-down: ANSI-PgDn
Search forwards through the history buffer for commands whose be-
ginning match the portion of the input line before the cursor.
When used on an empty line, this has the same effect as
down-history. This is only useful after an up-history,
search-history or search-history-up.
set-mark-command: ^[<space>
Set the mark at the cursor position.
transpose-chars: ^T
If at the end of line, or if the gmacs option is set, this ex-
changes the two previous characters; otherwise, it exchanges the
previous and current characters and moves the cursor one charac-
ter to the right.
up-history: [n] ^P, ^XA, ANSI-CurUp
Scrolls the history buffer backward n lines (earlier).
upcase-word: [n] ^[U, ^[u
Uppercase the next n words.
version: ^[^V
Display the version of mksh. The current edit buffer is restored
as soon as a key is pressed. The restoring keypress is processed,
unless it is a space.
yank: ^Y
Inserts the most recently killed text string at the current cur-
sor position.
yank-pop: ^[y
Immediately after a yank, replaces the inserted text string with
the next previously killed text string.
Vi editing mode
Note: The vi command-line editing mode is orphaned, yet still functional.
The vi command-line editor in mksh has basically the same commands as the
vi(1) editor with the following exceptions:
+ You start out in insert mode.
+ There are file name and command completion commands: =, \, *, ^X, ^E,
^F, and, optionally, <tab> and <esc>.
+ The _ command is different (in mksh, it is the last argument command;
in vi(1) it goes to the start of the current line).
+ The / and G commands move in the opposite direction to the j command.
+ Commands which don't make sense in a single line editor are not
available (e.g. screen movement commands and ex(1)-style colon (:)
commands).
Like vi(1), there are two modes: "insert" mode and "command" mode. In in-
sert mode, most characters are simply put in the buffer at the current
cursor position as they are typed; however, some characters are treated
specially. In particular, the following characters are taken from current
tty(4) settings (see stty(1)) and have their usual meaning (normal values
are in parentheses): kill (^U), erase (^?), werase (^W), eof (^D), intr
(^C), and quit (^\). In addition to the above, the following characters
are also treated specially in insert mode:
^E Command and file name enumeration (see below).
^F Command and file name completion (see below). If used twice in a
row, the list of possible completions is displayed; if used a
third time, the completion is undone.
^H Erases previous character.
^J | ^M End of line. The current line is read, parsed, and executed by
the shell.
^V Literal next. The next character typed is not treated specially
(can be used to insert the characters being described here).
^X Command and file name expansion (see below).
<esc> Puts the editor in command mode (see below).
<tab> Optional file name and command completion (see ^F above), en-
abled with set -o vi-tabcomplete.
In command mode, each character is interpreted as a command. Characters
that don't correspond to commands, are illegal combinations of commands,
or are commands that can't be carried out, all cause beeps. In the fol-
lowing command descriptions, an [n] indicates the command may be prefixed
by a number (e.g. 10l moves right 10 characters); if no number prefix is
used, n is assumed to be 1 unless otherwise specified. The term "current
position" refers to the position between the cursor and the character
preceding the cursor. A "word" is a sequence of letters, digits, and un-
derscore characters or a sequence of non-letter, non-digit, non-
underscore, and non-whitespace characters (e.g. "ab2*&^" contains two
words) and a "big-word" is a sequence of non-whitespace characters.
Special mksh vi commands:
The following commands are not in, or are different from, the normal vi
file editor:
[n]_
Insert a space followed by the nth big-word from the last command in
the history at the current position and enter insert mode; if n is
not specified, the last word is inserted.
# Insert the comment character ('#') at the start of the current line
and return the line to the shell (equivalent to I#^J).
[n]g
Like G, except if n is not specified, it goes to the most recent
remembered line.
[n]v
Edit line n using the vi(1) editor; if n is not specified, the
current line is edited. The actual command executed is fc -e
${VISUAL:-${EDITOR:-vi}} n.
* and ^X
Command or file name expansion is applied to the current big-word
(with an appended '*' if the word contains no file globbing charac-
ters) - the big-word is replaced with the resulting words. If the
current big-word is the first on the line or follows one of the
characters ';', '|', '&', '(', or ')', and does not contain a slash
('/'), then command expansion is done; otherwise file name expansion
is done. Command expansion will match the big-word against all
aliases, functions, and built-in commands as well as any executable
files found by searching the directories in the PATH parameter. File
name expansion matches the big-word against the files in the current
directory. After expansion, the cursor is placed just past the last
word and the editor is in insert mode.
[n]\, [n]^F, [n]<tab>, and [n]<esc>
Command/file name completion. Replace the current big-word with the
longest unique match obtained after performing command and file name
expansion. <tab> is only recognised if the vi-tabcomplete option is
set, while <esc> is only recognised if the vi-esccomplete option is
set (see set -o). If n is specified, the nth possible completion is
selected (as reported by the command/file name enumeration command).
= and ^E
Command/file name enumeration. List all the commands or files that
match the current big-word.
^V Display the version of mksh. The current edit buffer is restored as
soon as a key is pressed. The restoring keypress is ignored.
@c Macro expansion. Execute the commands found in the alias c.
Intra-line movement commands:
[n]h and [n]^H
Move left n characters.
[n]l and [n]<space>
Move right n characters.
0 Move to column 0.
^ Move to the first non-whitespace character.
[n]| Move to column n.
$ Move to the last character.
[n]b Move back n words.
[n]B Move back n big-words.
[n]e Move forward to the end of the word, n times.
[n]E Move forward to the end of the big-word, n times.
[n]w Move forward n words.
[n]W Move forward n big-words.
% Find match. The editor looks forward for the nearest parenthesis,
bracket, or brace and then moves the cursor to the matching
parenthesis, bracket, or brace.
[n]fc Move forward to the nth occurrence of the character c.
[n]Fc Move backward to the nth occurrence of the character c.
[n]tc Move forward to just before the nth occurrence of the character
c.
[n]Tc Move backward to just before the nth occurrence of the character
c.
[n]; Repeats the last f, F, t, or T command.
[n], Repeats the last f, F, t, or T command, but moves in the opposite
direction.
Inter-line movement commands:
[n]j, [n]+, and [n]^N
Move to the nth next line in the history.
[n]k, [n]-, and [n]^P
Move to the nth previous line in the history.
[n]G Move to line n in the history; if n is not specified, the number
of the first remembered line is used.
[n]g Like G, except if n is not specified, it goes to the most recent
remembered line.
[n]/string
Search backward through the history for the nth line containing
string; if string starts with '^', the remainder of the string
must appear at the start of the history line for it to match.
[n]?string
Same as /, except it searches forward through the history.
[n]n Search for the nth occurrence of the last search string; the
direction of the search is the same as the last search.
[n]N Search for the nth occurrence of the last search string; the
direction of the search is the opposite of the last search.
Edit commands
[n]a Append text n times; goes into insert mode just after the current
position. The append is only replicated if command mode is re-
entered i.e. <esc> is used.
[n]A Same as a, except it appends at the end of the line.
[n]i Insert text n times; goes into insert mode at the current posi-
tion. The insertion is only replicated if command mode is re-
entered i.e. <esc> is used.
[n]I Same as i, except the insertion is done just before the first
non-blank character.
[n]s Substitute the next n characters (i.e. delete the characters and
go into insert mode).
S Substitute whole line. All characters from the first non-blank
character to the end of the line are deleted and insert mode is
entered.
[n]cmove-cmd
Change from the current position to the position resulting from n
move-cmds (i.e. delete the indicated region and go into insert
mode); if move-cmd is c, the line starting from the first non-
blank character is changed.
C Change from the current position to the end of the line (i.e.
delete to the end of the line and go into insert mode).
[n]x Delete the next n characters.
[n]X Delete the previous n characters.
D Delete to the end of the line.
[n]dmove-cmd
Delete from the current position to the position resulting from n
move-cmds; move-cmd is a movement command (see above) or d, in
which case the current line is deleted.
[n]rc Replace the next n characters with the character c.
[n]R Replace. Enter insert mode but overwrite existing characters in-
stead of inserting before existing characters. The replacement is
repeated n times.
[n]~ Change the case of the next n characters.
[n]ymove-cmd
Yank from the current position to the position resulting from n
move-cmds into the yank buffer; if move-cmd is y, the whole line
is yanked.
Y Yank from the current position to the end of the line.
[n]p Paste the contents of the yank buffer just after the current po-
sition, n times.
[n]P Same as p, except the buffer is pasted at the current position.
Miscellaneous vi commands
^J and ^M
The current line is read, parsed, and executed by the shell.
^L and ^R
Redraw the current line.
[n]. Redo the last edit command n times.
u Undo the last edit command.
U Undo all changes that have been made to the current line.
intr and quit
The interrupt and quit terminal characters cause the current line
to be deleted and a new prompt to be printed.
FILES
~/.mkshrc User mkshrc profile (non-privileged interactive
shells); see Startup files. The location can be
changed at compile time (for embedded systems); AOSP
Android builds use /system/etc/mkshrc.
~/.profile User profile (non-privileged login shells); see
Startup files near the top of this manual.
/etc/profile System profile (login shells); see Startup files.
/etc/shells Shell database.
/etc/suid_profile Suid profile (privileged shells); see Startup files.
Note: On Android, /system/etc/ contains the system and suid profile.
SEE ALSOawk(1), cat(1), ed(1), getopt(1), printf(1), sed(1), sh(1), stty(1),
dup(2), execve(2), getgid(2), getuid(2), mknod(2), mkfifo(2), open(2),
pipe(2), rename(2), wait(2), getopt(3), nl_langinfo(3), setlocale(3),
signal(3), system(3), tty(4), shells(5), environ(7), script(7), utf-8(7),
mknod(8)
http://docsrv.sco.com:507/en/man/html.C/sh.C.html
Morris Bolsky, The KornShell Command and Programming Language, Prentice
Hall PTR, xvi + 356 pages, 1989, ISBN 978-0-13-516972-8 (0-13-516972-0).
Morris I. Bolsky and David G. Korn, The New KornShell Command and
Programming Language (2nd Edition), Prentice Hall PTR, xvi + 400 pages,
1995, ISBN 978-0-13-182700-4 (0-13-182700-6).
Stephen G. Kochan and Patrick H. Wood, UNIX Shell Programming, Hayden,
Revised Edition, xi + 490 pages, 1990, ISBN 978-0-672-48448-3
(0-672-48448-X).
IEEE Inc., IEEE Standard for Information Technology - Portable Operating
System Interface (POSIX), IEEE Press, Part 2: Shell and Utilities,
xvii + 1195 pages, 1993, ISBN 978-1-55937-255-8 (1-55937-255-9).
Bill Rosenblatt, Learning the Korn Shell, O'Reilly, 360 pages, 1993, ISBN
978-1-56592-054-5 (1-56592-054-6).
Bill Rosenblatt and Arnold Robbins, Learning the Korn Shell, Second
Edition, O'Reilly, 432 pages, 2002, ISBN 978-0-596-00195-7
(0-596-00195-9).
Barry Rosenberg, KornShell Programming Tutorial, Addison-Wesley
Professional, xxi + 324 pages, 1991, ISBN 978-0-201-56324-5
(0-201-56324-X).
AUTHORS
The MirBSD Korn Shell is developed by Thorsten Glaser <tg@mirbsd.org> and
currently maintained as part of The MirOS Project. This shell is based
upon the Public Domain Korn SHell. The developer of mksh recognises the
efforts of the pdksh authors, who had dedicated their work into Public
Domain, our users, and all contributors, such as the Debian and OpenBSD
projects. See the documentation, CVS, and web site for details.
CAVEATSmksh only supports the Unicode BMP (Basic Multilingual Plane). It has a
different scope model from AT&T UNIX ksh, which leads to subtile differ-
ences in semantics for identical builtins.
The parts of a pipeline, like below, are executed in subshells. Thus,
variable assignments inside them fail. Use co-processes instead.
foo | bar | read baz # will not change $baz
foo | bar |& read -p baz # will, however, do so
BUGS
Suspending (using ^Z) pipelines like the one below will only suspend the
currently running part of the pipeline; in this example, "fubar" is im-
mediately printed on suspension (but not later after an fg).
$ /bin/sleep 666 && echo fubar
This document attempts to describe mksh R40+CVS and up, compiled without
any options impacting functionality, such as MKSH_SMALL, for an operating
environment supporting all of its advanced needs. Please report bugs in
mksh to the MirOS mailing list at <miros-discuss@mirbsd.org> or in the
#!/bin/mksh (or #ksh) IRC channel at irc.freenode.net:6667.
MirOS August 13, 2011 48
