mknodat man page on Archlinux

Printed from http://www.polarhome.com/service/man/?qf=mknodat&af=0&tf=2&of=Archlinux

MKNOD(2)		   Linux Programmer's Manual		      MKNOD(2)

NAME
       mknod, mknodat - create a special or ordinary file

SYNOPSIS
       #include <sys/types.h>
       #include <sys/stat.h>
       #include <fcntl.h>
       #include <unistd.h>

       int mknod(const char *pathname, mode_t mode, dev_t dev);

       #include <fcntl.h>	    /* Definition of AT_* constants */
       #include <sys/stat.h>

       int mknodat(int dirfd, const char *pathname, mode_t mode, dev_t dev);

   Feature Test Macro Requirements for glibc (see feature_test_macros(7)):

       mknod():
	   _BSD_SOURCE || _SVID_SOURCE || _XOPEN_SOURCE >= 500 ||
	   _XOPEN_SOURCE && _XOPEN_SOURCE_EXTENDED

DESCRIPTION
       The system call mknod() creates a filesystem node (file, device special
       file,  or named pipe) named pathname, with attributes specified by mode
       and dev.

       The mode argument specifies both the permissions to use and the type of
       node  to	 be created.  It should be a combination (using bitwise OR) of
       one of the file types listed below and  the  permissions	 for  the  new
       node.

       The  permissions	 are modified by the process's umask in the usual way:
       the permissions of the created node are (mode & ~umask).

       The file type must be one of S_IFREG,  S_IFCHR,	S_IFBLK,  S_IFIFO,  or
       S_IFSOCK to specify a regular file (which will be created empty), char‐
       acter special file, block special file,	FIFO  (named  pipe),  or  UNIX
       domain  socket,	respectively.	(Zero  file type is equivalent to type
       S_IFREG.)

       If the file type is S_IFCHR or S_IFBLK, then dev	 specifies  the	 major
       and  minor numbers of the newly created device special file (makedev(3)
       may be useful to build the value for dev); otherwise it is ignored.

       If pathname already exists, or is a symbolic link, this call fails with
       an EEXIST error.

       The  newly  created  node will be owned by the effective user ID of the
       process.	 If the directory containing the node has the set-group-ID bit
       set,  or if the filesystem is mounted with BSD group semantics, the new
       node will inherit the group ownership from its parent directory; other‐
       wise it will be owned by the effective group ID of the process.

   mknodat()
       The mknodat() system call operates in exactly the same way as mknod(2),
       except for the differences described here.

       If the pathname given in pathname is relative, then it  is  interpreted
       relative	 to  the  directory  referred  to by the file descriptor dirfd
       (rather than relative to the current working directory of  the  calling
       process, as is done by mknod(2) for a relative pathname).

       If  pathname  is relative and dirfd is the special value AT_FDCWD, then
       pathname is interpreted relative to the current	working	 directory  of
       the calling process (like mknod(2)).

       If pathname is absolute, then dirfd is ignored.

       See openat(2) for an explanation of the need for mknodat().

RETURN VALUE
       mknod()	and  mknodat()	return	zero  on  success,  or	-1 if an error
       occurred (in which case, errno is set appropriately).

ERRORS
       EACCES The parent directory does not  allow  write  permission  to  the
	      process,	or  one of the directories in the path prefix of path‐
	      name did not allow search permission.   (See  also  path_resolu‐
	      tion(7).)

       EDQUOT The  user's quota of disk blocks or inodes on the filesystem has
	      been exhausted.

       EEXIST pathname already exists.	This includes the case where  pathname
	      is a symbolic link, dangling or not.

       EFAULT pathname points outside your accessible address space.

       EINVAL mode  requested creation of something other than a regular file,
	      device special file, FIFO or socket.

       ELOOP  Too many symbolic links were encountered in resolving pathname.

       ENAMETOOLONG
	      pathname was too long.

       ENOENT A directory component in pathname does not exist or  is  a  dan‐
	      gling symbolic link.

       ENOMEM Insufficient kernel memory was available.

       ENOSPC The device containing pathname has no room for the new node.

       ENOTDIR
	      A	 component  used as a directory in pathname is not, in fact, a
	      directory.

       EPERM  mode requested creation of something other than a regular	 file,
	      FIFO  (named pipe), or UNIX domain socket, and the caller is not
	      privileged (Linux: does not have the CAP_MKNOD capability); also
	      returned	if the filesystem containing pathname does not support
	      the type of node requested.

       EROFS  pathname refers to a file on a read-only filesystem.

       The following additional errors can occur for mknodat():

       EBADF  dirfd is not a valid file descriptor.

       ENOTDIR
	      pathname is relative and dirfd is a file descriptor referring to
	      a file other than a directory.

VERSIONS
       mknodat()  was  added  to  Linux	 in kernel 2.6.16; library support was
       added to glibc in version 2.4.

CONFORMING TO
       mknod(): SVr4, 4.4BSD, POSIX.1-2001 (but see below), POSIX.1-2008.

       mknodat(): POSIX.1-2008.

NOTES
       POSIX.1-2001 says: "The only portable use of mknod()  is	 to  create  a
       FIFO-special  file.  If mode is not S_IFIFO or dev is not 0, the behav‐
       ior of mknod() is unspecified."	However, nowadays one should never use
       mknod()	for  this  purpose; one should use mkfifo(3), a function espe‐
       cially defined for this purpose.

       Under Linux, mknod() cannot be used to create directories.  One	should
       make directories with mkdir(2).

       There  are  many	 infelicities in the protocol underlying NFS.  Some of
       these affect mknod() and mknodat(2).

SEE ALSO
       chmod(2), chown(2), fcntl(2), mkdir(2), mount(2),  socket(2),  stat(2),
       umask(2), unlink(2), makedev(3), mkfifo(3), path_resolution(7)

COLOPHON
       This  page  is  part of release 3.65 of the Linux man-pages project.  A
       description of the project, and information about reporting  bugs,  can
       be found at http://www.kernel.org/doc/man-pages/.

Linux				  2014-02-21			      MKNOD(2)
[top]

List of man pages available for Archlinux

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net