LPD(8) OpenBSD System Manager's Manual LPD(8)NAMElpd - line printer spooler daemon
SYNOPSISlpd [-dlrs] [-b bind-address] [-n maxchild] [-w maxwait] [port]
DESCRIPTIONlpd is the line printer daemon (spool area handler) and is normally
invoked at boot time from the rc(8) file. It makes a single pass through
the printcap(5) file to find out about the existing printers and prints
any files left after a crash. It then uses the system calls listen(2)
and accept(2) to receive requests to print files in the queue, transfer
files to the spooling area, display the queue, or remove jobs from the
queue. In each case, it forks a child to handle the request so the
parent can continue to listen for more requests.
The options are as follows:
-b bind-address
Normally, if the -s option is not specified, lpd will listen on
all network interfaces for incoming TCP connections. The -b
option, followed by a bind-address specifies that lpd should
listen on that address instead of INADDR_ANY. Multiple -b
options are permitted, allowing a list of addresses to be
specified. Use of this option silently overrides the -s option
if it is also present on the command line. bind-address can be a
numeric host name in IPV4 or IPV6 notation, or a symbolic host
name which will be looked up in the normal way.
-d The -d option turns on the SO_DEBUG socket(2) option. See
setsockopt(2) for more details.
-l The -l flag causes lpd to log valid requests received from the
network. This can be useful for debugging purposes.
-n maxchild
The -n flag sets maxchild as the maximum number of child
processes that lpd will spawn. The default is 32.
-r The -r flag allows the ``of'' filter to be used if specified for
a remote printer. Traditionally, lpd would not use the output
filter for remote printers.
-s The -s flag selects ``secure'' mode, in which lpd does not listen
on a TCP socket but only takes commands from a UNIX-domain
socket. This is valuable when the machine on which lpd runs is
subject to attack over the network and it is desired that the
machine be protected from attempts to remotely fill spools and
similar attacks.
-w maxwait
The -w flag sets maxwait as the wait time (in seconds) for dead
remote server detection. If no response is returned from a
connected server within this period, the connection is closed and
a message logged. The default is 300 seconds.
If the [port] parameter is passed, lpd listens on this port instead of
the usual ``printer/tcp'' port from /etc/services.
Access control is provided by two means. First, all requests must come
from one of the machines listed in the file /etc/hosts.equiv or
/etc/hosts.lpd (which follows the same syntax as hosts.equiv(5)).
Second, if the ``rs'' capability is specified in the printcap(5) entry
for the printer being accessed, lpr requests will only be honored for
those users with accounts on the machine with the printer.
lpd performs reverse DNS lookups on network clients. If a client
hostname cannot be determined from its IP address, the print request will
be silently dropped. This is important to note when debugging print
problems in dynamic address environments.
The file minfree in each spool directory contains the number of disk
blocks to leave free so that the line printer queue won't completely fill
the disk. The minfree file can be edited with your favorite text editor.
The daemon begins processing files after it has successfully set the lock
for exclusive access (described a bit later), and scans the spool
directory for files beginning with cf. Lines in each cf file specify
files to be printed or non-printing actions to be performed. Each such
line begins with a key character to specify what to do with the remainder
of the line.
J Job Name. String to be used for the job name on the burst page.
C Classification. String to be used for the classification line on
the burst page.
L Literal. The line contains identification info from the password
file and causes the banner page to be printed.
T Title. String to be used as the title for pr(1).
H Host Name. Name of the machine where lpr(1) was invoked.
P Person. Login name of the person who invoked lpr(1). This is
used to verify ownership by lprm(1).
M Send mail to the specified user when the current print job
completes.
f Formatted File. Name of a file to print which is already
formatted.
l Like ``f'' but passes control characters and does not make page
breaks.
p Name of a file to print using pr(1) as a filter.
t Troff File. The file contains troff output (cat phototypesetter
commands).
n Ditroff File. The file contains device independent troff output.
r DVI File. The file contains Tex l output DVI format from
Stanford.
g Graph File. The file contains data produced by plot.
c Cifplot File. The file contains data produced by cifplot.
v The file contains a raster image.
r The file contains text data with FORTRAN carriage control
characters.
1 Troff Font R. Name of the font file to use instead of the
default.
2 Troff Font I. Name of the font file to use instead of the
default.
3 Troff Font B. Name of the font file to use instead of the
default.
4 Troff Font S. Name of the font file to use instead of the
default.
W Width. Changes the page width (in characters) used by pr(1) and
the text filters.
I Indent. The number of characters to indent the output by (in
ASCII).
U Unlink. Name of file to remove upon completion of printing.
N File name. The name of the file which is being printed, or a
blank for the standard input (when lpr(1) is invoked in a
pipeline).
If a file cannot be opened, a message will be logged via syslog(3) using
the LOG_LPR facility. lpd will try up to 20 times to reopen a file it
expects to be there, after which it will skip the file to be printed.
lpd uses flock(2) to provide exclusive access to the lock file and to
prevent multiple daemons from becoming active simultaneously. If the
daemon should be killed or die unexpectedly, the lock file need not be
removed. The lock file is kept in a readable ASCII form and contains two
lines. The first is the process ID of the daemon and the second is the
control file name of the current job being printed. The second line is
updated to reflect the current status of lpd for the programs lpq(1) and
lprm(1).
FILES
/etc/printcap printer description file
/var/run/lpd.pid lock file for lpd
/var/spool/output/* spool directories
/var/spool/output/*/minfree minimum free space to leave
/dev/lp* line printer devices
/var/run/printer socket for local requests
/etc/hosts.equiv lists machine names allowed printer access
/etc/hosts.lpd lists machine names allowed printer access,
but not under same administrative control.
SEE ALSOlpq(1), lpr(1), lprm(1), syslog(3), hosts(5), hosts.equiv(5),
printcap(5), resolv.conf(5), lpc(8), pac(8)
4.3BSD Line Printer Spooler Manual.
HISTORY
An lpd daemon appeared in Version 6 AT&T UNIX.
lpd previously required that clients connected using a privileged port
(below 1024). This restriction was removed because it does not provide
additional security and also because many modern clients connect using an
unprivileged port.
OpenBSD 4.9 October 28, 2010 OpenBSD 4.9
