lge man page on MirBSD

Man page or keyword search:  
man Server   6113 pages
apropos Keyword Search (all sections)
Output format
MirBSD logo
[printable version]

LGE(4)			   BSD Programmer's Manual			LGE(4)

NAME
     lge - Level 1 LXT1001 NetCellerator PCI gigabit ethernet adapter driver

SYNOPSIS
     lge* at pci? dev ? function ?

DESCRIPTION
     The lge driver provides support for various NICs based on the Level 1
     LXT1001 NetCellerator gigabit ethernet controller chip, including the
     following:

     +	 SMC TigerCard 1000 (SMC9462SX)
     +	 D-Link DGE-500SX

     These NICs are capable of 1000Mbps speeds over fiber optic cable. The
     LXT1001 also supports a GMII port for use with 10/100/1000 copper PHYs,
     however there aren't currently any NICs on the market that use this
     feature.

     The LXT1001 supports TCP/IP checksum offload for receive and VLAN-based
     filtering as well as a 64-bit multicast hash filter. It also supports
     jumbo frames, which can be configured via the interface MTU setting.
     Selecting an MTU larger than 1500 bytes with the ifconfig(8) utility con-
     figures the adapter to receive and transmit jumbo frames. Using jumbo
     frames can greatly improve performance for certain tasks, such as file
     transfers and data streaming.

     The lge driver supports the following media types:

     autoselect	  Enable autoselection of the media type and options. The user
		  can manually override the autoselected mode by adding media
		  options to the appropriate hostname.if(5) file.

     1000baseSX	  Set 1000baseSX operation over fiber optic cable. Both full-
		  duplex and half-duplex modes are supported.

     The lge driver supports the following media options:

     full-duplex  Force full duplex operation.

     half-duplex  Force half duplex operation.

     For more information on configuring this device, see ifconfig(8).

DIAGNOSTICS
     lge%d: couldn't map memory	 A fatal initialization error has occurred.

     lge%d: couldn't map ports	A fatal initialization error has occurred.

     lge%d: couldn't map interrupt  A fatal initialization error has occurred.

     lge%d: no memory for softc struct!	 The driver failed to allocate memory
     for per-device instance information during initialization.

     lge%d: failed to enable memory mapping!  The driver failed to initialize
     PCI shared memory mapping. This might happen if the card is not in a
     bus-master slot.

     lge%d: no memory for jumbo buffers!  The driver failed to allocate memory
     for jumbo frames during initialization.

     lge%d: watchdog timeout  The device has stopped responding to the net-
     work, or there is a problem with the network connection (cable).

SEE ALSO
     arp(4), ifmedia(4), intro(4), netintro(4), pci(4), vlan(4),
     hostname.if(5), ifconfig(8)

     Level 1 LXT1001 Programming Manual,
     http://www.FreeBSD.org/~wpaul/Level1/LXT1001SRM.pdf.

HISTORY
     The lge device driver first appeared in OpenBSD 3.0.

AUTHORS
     The lge driver was written by Bill Paul <william.paul@windriver.com>.

MirOS BSD #10-current		 May 30, 2001				     1
[top]

List of man pages available for MirBSD

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net