IP(7) Linux Programmer's Manual IP(7)NAMEip - Linux IPv4 protocol implementation
SYNOPSIS
#include <sys/socket.h>
#include <netinet/in.h>
#include <netinet/ip.h> /* superset of previous */
tcp_socket = socket(AF_INET, SOCK_STREAM, 0);
udp_socket = socket(AF_INET, SOCK_DGRAM, 0);
raw_socket = socket(AF_INET, SOCK_RAW, protocol);
DESCRIPTION
Linux implements the Internet Protocol, version 4, described in RFC 791
and RFC 1122. ip contains a level 2 multicasting implementation con‐
forming to RFC 1112. It also contains an IP router including a packet
filter.
The programming interface is BSD-sockets compatible. For more informa‐
tion on sockets, see socket(7).
An IP socket is created by calling the socket(2) function as
socket(AF_INET, socket_type, protocol). Valid socket types are
SOCK_STREAM to open a tcp(7) socket, SOCK_DGRAM to open a udp(7)
socket, or SOCK_RAW to open a raw(7) socket to access the IP protocol
directly. protocol is the IP protocol in the IP header to be received
or sent. The only valid values for protocol are 0 and IPPROTO_TCP for
TCP sockets, and 0 and IPPROTO_UDP for UDP sockets. For SOCK_RAW you
may specify a valid IANA IP protocol defined in RFC 1700 assigned num‐
bers.
When a process wants to receive new incoming packets or connections, it
should bind a socket to a local interface address using bind(2). In
this case, only one IP socket may be bound to any given local (address,
port) pair. When INADDR_ANY is specified in the bind call, the socket
will be bound to all local interfaces. When listen(2) is called on an
unbound socket, the socket is automatically bound to a random free port
with the local address set to INADDR_ANY. When connect(2) is called on
an unbound socket, the socket is automatically bound to a random free
port or to a usable shared port with the local address set to
INADDR_ANY.
A TCP local socket address that has been bound is unavailable for some
time after closing, unless the SO_REUSEADDR flag has been set. Care
should be taken when using this flag as it makes TCP less reliable.
Address format
An IP socket address is defined as a combination of an IP interface
address and a 16-bit port number. The basic IP protocol does not sup‐
ply port numbers, they are implemented by higher level protocols like
udp(7) and tcp(7). On raw sockets sin_port is set to the IP protocol.
struct sockaddr_in {
sa_family_t sin_family; /* address family: AF_INET */
in_port_t sin_port; /* port in network byte order */
struct in_addr sin_addr; /* internet address */
};
/* Internet address. */
struct in_addr {
uint32_t s_addr; /* address in network byte order */
};
sin_family is always set to AF_INET. This is required; in Linux 2.2
most networking functions return EINVAL when this setting is missing.
sin_port contains the port in network byte order. The port numbers
below 1024 are called privileged ports (or sometimes: reserved ports).
Only privileged processes (i.e., those having the CAP_NET_BIND_SERVICE
capability) may bind(2) to these sockets. Note that the raw IPv4 pro‐
tocol as such has no concept of a port, they are implemented only by
higher protocols like tcp(7) and udp(7).
sin_addr is the IP host address. The s_addr member of struct in_addr
contains the host interface address in network byte order. in_addr
should be assigned one of the INADDR_* values (e.g., INADDR_ANY) or set
using the inet_aton(3), inet_addr(3), inet_makeaddr(3) library func‐
tions or directly with the name resolver (see gethostbyname(3)).
IPv4 addresses are divided into unicast, broadcast and multicast
addresses. Unicast addresses specify a single interface of a host,
broadcast addresses specify all hosts on a network and multicast
addresses address all hosts in a multicast group. Datagrams to broad‐
cast addresses can be sent or received only when the SO_BROADCAST
socket flag is set. In the current implementation, connection-oriented
sockets are allowed to use only unicast addresses.
Note that the address and the port are always stored in network byte
order. In particular, this means that you need to call htons(3) on the
number that is assigned to a port. All address/port manipulation func‐
tions in the standard library work in network byte order.
There are several special addresses: INADDR_LOOPBACK (127.0.0.1) always
refers to the local host via the loopback device; INADDR_ANY (0.0.0.0)
means any address for binding; INADDR_BROADCAST (255.255.255.255) means
any host and has the same effect on bind as INADDR_ANY for historical
reasons.
Socket options
IP supports some protocol-specific socket options that can be set with
setsockopt(2) and read with getsockopt(2). The socket option level for
IP is IPPROTO_IP. A boolean integer flag is zero when it is false,
otherwise true.
IP_ADD_MEMBERSHIP (since Linux 1.2)
Join a multicast group. Argument is an ip_mreqn structure.
struct ip_mreqn {
struct in_addr imr_multiaddr; /* IP multicast group
address */
struct in_addr imr_address; /* IP address of local
interface */
int imr_ifindex; /* interface index */
};
imr_multiaddr contains the address of the multicast group the
application wants to join or leave. It must be a valid multi‐
cast address (or setsockopt(2) fails with the error EINVAL).
imr_address is the address of the local interface with which the
system should join the multicast group; if it is equal to
INADDR_ANY an appropriate interface is chosen by the system.
imr_ifindex is the interface index of the interface that should
join/leave the imr_multiaddr group, or 0 to indicate any inter‐
face.
The ip_mreqn structure is available only since Linux 2.2. For
compatibility, the old ip_mreq structure (present since Linux
1.2) is still supported; it differs from ip_mreqn only by not
including the imr_ifindex field. Only valid as a setsockopt(2).
IP_ADD_SOURCE_MEMBERSHIP (since Linux 2.4.22 / 2.5.68)
Join a multicast group and allow receiving data only from a
specified source. Argument is an ip_mreq_source structure.
struct ip_mreq_source {
struct in_addr imr_multiaddr; /* IP multicast group
address */
struct in_addr imr_interface; /* IP address of local
interface */
struct in_addr imr_sourceaddr; /* IP address of
multicast source */
};
The ip_mreq_source structure is similar to ip_mreqn described
under IP_ADD_MEMBERSIP. The imr_multiaddr field contains the
address of the multicast group the application wants to join or
leave. The imr_interface field is the address of the local
interface with which the system should join the multicast group.
Finally, the imr_sourceaddr field contains the address of the
source the application wants to receive data from.
This option can be used multiple times to allow receiving data
from more than one source.
IP_BLOCK_SOURCE (since Linux 2.4.22 / 2.5.68)
Stop receiving multicast data from a specific source in a given
group. This is valid only after the application has subscribed
to the multicast group using either IP_ADD_MEMBERSHIP or
IP_ADD_SOURCE_MEMBERSHIP.
Argument is an ip_mreq_source structure as described under
IP_ADD_SOURCE_MEMBERSHIP.
IP_DROP_MEMBERSHIP (since Linux 1.2)
Leave a multicast group. Argument is an ip_mreqn or ip_mreq
structure similar to IP_ADD_MEMBERSHIP.
IP_DROP_SOURCE_MEMBERSHIP (since Linux 2.4.22 / 2.5.68)
Leave a source-specific group—that is, stop receiving data from
a given multicast group that come from a given source. If the
application has subscribed to multiple sources within the same
group, data from the remaining sources will still be delivered.
To stop receiving data from all sources at once, use
IP_LEAVE_GROUP.
Argument is an ip_mreq_source structure as described under
IP_ADD_SOURCE_MEMBERSHIP.
IP_FREEBIND (since Linux 2.4)
If enabled, this boolean option allows binding to an IP address
that is nonlocal or does not (yet) exist. This permits listen‐
ing on a socket, without requiring the underlying network inter‐
face or the specified dynamic IP address to be up at the time
that the application is trying to bind to it. This option is
the per-socket equivalent of the ip_nonlocal_bind /proc inter‐
face described below.
IP_HDRINCL (since Linux 2.0)
If enabled, the user supplies an IP header in front of the user
data. Only valid for SOCK_RAW sockets. See raw(7) for more
information. When this flag is enabled the values set by
IP_OPTIONS, IP_TTL and IP_TOS are ignored.
IP_MSFILTER (since Linux 2.4.22 / 2.5.68)
This option provides access to the advanced full-state filtering
API. Argument is an ip_msfilter structure.
struct ip_msfilter {
struct in_addr imsf_multiaddr; /* IP multicast group
address */
struct in_addr imsf_interface; /* IP address of local
interface */
uint32_t imsf_fmode; /* Filter-mode */
uint32_t imsf_numsrc; /* Number of sources in
the following array */
struct in_addr imsf_slist[1]; /* Array of source
addresses */
};
There are two macros, MCAST_INCLUDE and MCAST_EXCLUDE, which can
be used to specify the filtering mode. Additionally, the
IP_MSFILTER_SIZE(n) macro exists to determine how much memory is
needed to store ip_msfilter structure with n sources in the
source list.
For the full description of multicast source filtering refer to
RFC 3376.
IP_MTU (since Linux 2.2)
Retrieve the current known path MTU of the current socket.
Valid only when the socket has been connected. Returns an inte‐
ger. Only valid as a getsockopt(2).
IP_MTU_DISCOVER (since Linux 2.2)
Set or receive the Path MTU Discovery setting for a socket.
When enabled, Linux will perform Path MTU Discovery as defined
in RFC 1191 on SOCK_STREAM sockets. For non-SOCK_STREAM sock‐
ets, IP_PMTUDISC_DO forces the don't-fragment flag to be set on
all outgoing packets. It is the user's responsibility to packe‐
tize the data in MTU-sized chunks and to do the retransmits if
necessary. The kernel will reject (with EMSGSIZE) datagrams
that are bigger than the known path MTU. IP_PMTUDISC_WANT will
fragment a datagram if needed according to the path MTU, or will
set the don't-fragment flag otherwise.
The system-wide default can be toggled between IP_PMTUDISC_WANT
and IP_PMTUDISC_DONT by writing (respectively, zero and nonzero
values) to the /proc/sys/net/ipv4/ip_no_pmtu_disc file.
Path MTU discovery value Meaning
IP_PMTUDISC_WANT Use per-route settings.
IP_PMTUDISC_DONT Never do Path MTU Discovery.
IP_PMTUDISC_DO Always do Path MTU Discovery.
IP_PMTUDISC_PROBE Set DF but ignore Path MTU.
When PMTU discovery is enabled, the kernel automatically keeps
track of the path MTU per destination host. When it is con‐
nected to a specific peer with connect(2), the currently known
path MTU can be retrieved conveniently using the IP_MTU socket
option (e.g., after an EMSGSIZE error occurred). The path MTU
may change over time. For connectionless sockets with many des‐
tinations, the new MTU for a given destination can also be
accessed using the error queue (see IP_RECVERR). A new error
will be queued for every incoming MTU update.
While MTU discovery is in progress, initial packets from data‐
gram sockets may be dropped. Applications using UDP should be
aware of this and not take it into account for their packet
retransmit strategy.
To bootstrap the path MTU discovery process on unconnected sock‐
ets, it is possible to start with a big datagram size (up to
64K-headers bytes long) and let it shrink by updates of the path
MTU.
To get an initial estimate of the path MTU, connect a datagram
socket to the destination address using connect(2) and retrieve
the MTU by calling getsockopt(2) with the IP_MTU option.
It is possible to implement RFC 4821 MTU probing with SOCK_DGRAM
or SOCK_RAW sockets by setting a value of IP_PMTUDISC_PROBE
(available since Linux 2.6.22). This is also particularly use‐
ful for diagnostic tools such as tracepath(8) that wish to
deliberately send probe packets larger than the observed Path
MTU.
IP_MULTICAST_ALL (since Linux 2.6.31)
This option can be used to modify the delivery policy of multi‐
cast messages to sockets bound to the wildcard INADDR_ANY
address. The argument is a boolean integer (defaults to 1). If
set to 1, the socket will receive messages from all the groups
that have been joined globally on the whole system. Otherwise,
it will deliver messages only from the groups that have been
explicitly joined (for example via the IP_ADD_MEMBERSHIP option)
on this particular socket.
IP_MULTICAST_IF (since Linux 1.2)
Set the local device for a multicast socket. Argument is an
ip_mreqn or ip_mreq structure similar to IP_ADD_MEMBERSHIP.
When an invalid socket option is passed, ENOPROTOOPT is
returned.
IP_MULTICAST_LOOP (since Linux 1.2)
Set or read a boolean integer argument that determines whether
sent multicast packets should be looped back to the local sock‐
ets.
IP_MULTICAST_TTL (since Linux 1.2)
Set or read the time-to-live value of outgoing multicast packets
for this socket. It is very important for multicast packets to
set the smallest TTL possible. The default is 1 which means
that multicast packets don't leave the local network unless the
user program explicitly requests it. Argument is an integer.
IP_NODEFRAG (since Linux 2.6.36)
If enabled (argument is nonzero), the reassembly of outgoing
packets is disabled in the netfilter layer. This option is
valid only for SOCK_RAW sockets. The argument is an integer.
IP_OPTIONS (since Linux 2.0)
Set or get the IP options to be sent with every packet from this
socket. The arguments are a pointer to a memory buffer contain‐
ing the options and the option length. The setsockopt(2) call
sets the IP options associated with a socket. The maximum
option size for IPv4 is 40 bytes. See RFC 791 for the allowed
options. When the initial connection request packet for a
SOCK_STREAM socket contains IP options, the IP options will be
set automatically to the options from the initial packet with
routing headers reversed. Incoming packets are not allowed to
change options after the connection is established. The pro‐
cessing of all incoming source routing options is disabled by
default and can be enabled by using the accept_source_route
/proc interface. Other options like timestamps are still han‐
dled. For datagram sockets, IP options can be only set by the
local user. Calling getsockopt(2) with IP_OPTIONS puts the cur‐
rent IP options used for sending into the supplied buffer.
IP_PKTINFO (since Linux 2.2)
Pass an IP_PKTINFO ancillary message that contains a pktinfo
structure that supplies some information about the incoming
packet. This only works for datagram oriented sockets. The
argument is a flag that tells the socket whether the IP_PKTINFO
message should be passed or not. The message itself can only be
sent/retrieved as control message with a packet using recvmsg(2)
or sendmsg(2).
struct in_pktinfo {
unsigned int ipi_ifindex; /* Interface index */
struct in_addr ipi_spec_dst; /* Local address */
struct in_addr ipi_addr; /* Header Destination
address */
};
ipi_ifindex is the unique index of the interface the packet was
received on. ipi_spec_dst is the local address of the packet
and ipi_addr is the destination address in the packet header.
If IP_PKTINFO is passed to sendmsg(2) and ipi_spec_dst is not
zero, then it is used as the local source address for the rout‐
ing table lookup and for setting up IP source route options.
When ipi_ifindex is not zero, the primary local address of the
interface specified by the index overwrites ipi_spec_dst for the
routing table lookup.
IP_RECVERR (since Linux 2.2)
Enable extended reliable error message passing. When enabled on
a datagram socket, all generated errors will be queued in a per-
socket error queue. When the user receives an error from a
socket operation, the errors can be received by calling
recvmsg(2) with the MSG_ERRQUEUE flag set. The
sock_extended_err structure describing the error will be passed
in an ancillary message with the type IP_RECVERR and the level
IPPROTO_IP. This is useful for reliable error handling on
unconnected sockets. The received data portion of the error
queue contains the error packet.
The IP_RECVERR control message contains a sock_extended_err
structure:
#define SO_EE_ORIGIN_NONE 0
#define SO_EE_ORIGIN_LOCAL 1
#define SO_EE_ORIGIN_ICMP 2
#define SO_EE_ORIGIN_ICMP6 3
struct sock_extended_err {
uint32_t ee_errno; /* error number */
uint8_t ee_origin; /* where the error originated */
uint8_t ee_type; /* type */
uint8_t ee_code; /* code */
uint8_t ee_pad;
uint32_t ee_info; /* additional information */
uint32_t ee_data; /* other data */
/* More data may follow */
};
struct sockaddr *SO_EE_OFFENDER(struct sock_extended_err *);
ee_errno contains the errno number of the queued error. ee_ori‐
gin is the origin code of where the error originated. The other
fields are protocol-specific. The macro SO_EE_OFFENDER returns
a pointer to the address of the network object where the error
originated from given a pointer to the ancillary message. If
this address is not known, the sa_family member of the sockaddr
contains AF_UNSPEC and the other fields of the sockaddr are
undefined.
IP uses the sock_extended_err structure as follows: ee_origin is
set to SO_EE_ORIGIN_ICMP for errors received as an ICMP packet,
or SO_EE_ORIGIN_LOCAL for locally generated errors. Unknown
values should be ignored. ee_type and ee_code are set from the
type and code fields of the ICMP header. ee_info contains the
discovered MTU for EMSGSIZE errors. The message also contains
the sockaddr_in of the node caused the error, which can be
accessed with the SO_EE_OFFENDER macro. The sin_family field of
the SO_EE_OFFENDER address is AF_UNSPEC when the source was
unknown. When the error originated from the network, all IP
options (IP_OPTIONS, IP_TTL, etc.) enabled on the socket and
contained in the error packet are passed as control messages.
The payload of the packet causing the error is returned as nor‐
mal payload. Note that TCP has no error queue; MSG_ERRQUEUE is
not permitted on SOCK_STREAM sockets. IP_RECVERR is valid for
TCP, but all errors are returned by socket function return or
SO_ERROR only.
For raw sockets, IP_RECVERR enables passing of all received ICMP
errors to the application, otherwise errors are only reported on
connected sockets
It sets or retrieves an integer boolean flag. IP_RECVERR
defaults to off.
IP_RECVOPTS (since Linux 2.2)
Pass all incoming IP options to the user in a IP_OPTIONS control
message. The routing header and other options are already
filled in for the local host. Not supported for SOCK_STREAM
sockets.
IP_RECVORIGDSTADDR (since Linux 2.6.29)
This boolean option enables the IP_ORIGDSTADDR ancillary message
in recvmsg(2), in which the kernel returns the original destina‐
tion address of the datagram being received. The ancillary mes‐
sage contains a struct sockaddr_in.
IP_RECVTOS (since Linux 2.2)
If enabled the IP_TOS ancillary message is passed with incoming
packets. It contains a byte which specifies the Type of Ser‐
vice/Precedence field of the packet header. Expects a boolean
integer flag.
IP_RECVTTL (since Linux 2.2)
When this flag is set, pass a IP_TTL control message with the
time to live field of the received packet as a byte. Not sup‐
ported for SOCK_STREAM sockets.
IP_RETOPTS (since Linux 2.2)
Identical to IP_RECVOPTS, but returns raw unprocessed options
with timestamp and route record options not filled in for this
hop.
IP_ROUTER_ALERT (since Linux 2.2)
Pass all to-be forwarded packets with the IP Router Alert option
set to this socket. Only valid for raw sockets. This is use‐
ful, for instance, for user-space RSVP daemons. The tapped
packets are not forwarded by the kernel; it is the user's
responsibility to send them out again. Socket binding is
ignored, such packets are only filtered by protocol. Expects an
integer flag.
IP_TOS (since Linux 1.0)
Set or receive the Type-Of-Service (TOS) field that is sent with
every IP packet originating from this socket. It is used to
prioritize packets on the network. TOS is a byte. There are
some standard TOS flags defined: IPTOS_LOWDELAY to minimize
delays for interactive traffic, IPTOS_THROUGHPUT to optimize
throughput, IPTOS_RELIABILITY to optimize for reliability,
IPTOS_MINCOST should be used for "filler data" where slow trans‐
mission doesn't matter. At most one of these TOS values can be
specified. Other bits are invalid and shall be cleared. Linux
sends IPTOS_LOWDELAY datagrams first by default, but the exact
behavior depends on the configured queueing discipline. Some
high priority levels may require superuser privileges (the
CAP_NET_ADMIN capability). The priority can also be set in a
protocol independent way by the (SOL_SOCKET, SO_PRIORITY) socket
option (see socket(7)).
IP_TRANSPARENT (since Linux 2.6.24)
Setting this boolean option enables transparent proxying on this
socket. This socket option allows the calling application to
bind to a nonlocal IP address and operate both as a client and a
server with the foreign address as the local endpoint. NOTE:
this requires that routing be set up in a way that packets going
to the foreign address are routed through the TProxy box.
Enabling this socket option requires superuser privileges (the
CAP_NET_ADMIN capability).
TProxy redirection with the iptables TPROXY target also requires
that this option be set on the redirected socket.
IP_TTL (since Linux 1.0)
Set or retrieve the current time-to-live field that is used in
every packet sent from this socket.
IP_UNBLOCK_SOURCE (since Linux 2.4.22 / 2.5.68)
Unblock previously blocked multicast source. Returns EADDRNO‐
TAVAIL when given source is not being blocked.
Argument is an ip_mreq_source structure as described under
IP_ADD_SOURCE_MEMBERSHIP.
/proc interfaces
The IP protocol supports a set of /proc interfaces to configure some
global parameters. The parameters can be accessed by reading or writ‐
ing files in the directory /proc/sys/net/ipv4/. Interfaces described
as Boolean take an integer value, with a nonzero value ("true") meaning
that the corresponding option is enabled, and a zero value ("false")
meaning that the option is disabled.
ip_always_defrag (Boolean; since Linux 2.2.13)
[New with kernel 2.2.13; in earlier kernel versions this feature
was controlled at compile time by the CONFIG_IP_ALWAYS_DEFRAG
option; this option is not present in 2.4.x and later]
When this boolean flag is enabled (not equal 0), incoming frag‐
ments (parts of IP packets that arose when some host between
origin and destination decided that the packets were too large
and cut them into pieces) will be reassembled (defragmented)
before being processed, even if they are about to be forwarded.
Only enable if running either a firewall that is the sole link
to your network or a transparent proxy; never ever use it for a
normal router or host. Otherwise fragmented communication can
be disturbed if the fragments travel over different links.
Defragmentation also has a large memory and CPU time cost.
This is automagically turned on when masquerading or transparent
proxying are configured.
ip_autoconfig (since Linux 2.2 to 2.6.17)
Not documented.
ip_default_ttl (integer; default: 64; since Linux 2.2)
Set the default time-to-live value of outgoing packets. This
can be changed per socket with the IP_TTL option.
ip_dynaddr (Boolean; default: disabled; since Linux 2.0.31)
Enable dynamic socket address and masquerading entry rewriting
on interface address change. This is useful for dialup inter‐
face with changing IP addresses. 0 means no rewriting, 1 turns
it on and 2 enables verbose mode.
ip_forward (Boolean; default: disabled; since Linux 1.2)
Enable IP forwarding with a boolean flag. IP forwarding can be
also set on a per-interface basis.
ip_local_port_range (since Linux 2.2)
Contains two integers that define the default local port range
allocated to sockets. Allocation starts with the first number
and ends with the second number. Note that these should not
conflict with the ports used by masquerading (although the case
is handled). Also arbitrary choices may cause problems with
some firewall packet filters that make assumptions about the
local ports in use. First number should be at least greater
than 1024, or better, greater than 4096, to avoid clashes with
well known ports and to minimize firewall problems.
ip_no_pmtu_disc (Boolean; default: disabled; since Linux 2.2)
If enabled, don't do Path MTU Discovery for TCP sockets by
default. Path MTU discovery may fail if misconfigured firewalls
(that drop all ICMP packets) or misconfigured interfaces (e.g.,
a point-to-point link where the both ends don't agree on the
MTU) are on the path. It is better to fix the broken routers on
the path than to turn off Path MTU Discovery globally, because
not doing it incurs a high cost to the network.
ip_nonlocal_bind (Boolean; default: disabled; since Linux 2.4)
If set, allows processes to bind(2) to nonlocal IP addresses,
which can be quite useful, but may break some applications.
ip6frag_time (integer; default: 30)
Time in seconds to keep an IPv6 fragment in memory.
ip6frag_secret_interval (integer; default: 600)
Regeneration interval (in seconds) of the hash secret (or life‐
time for the hash secret) for IPv6 fragments.
ipfrag_high_thresh (integer), ipfrag_low_thresh (integer)
If the amount of queued IP fragments reaches ipfrag_high_thresh,
the queue is pruned down to ipfrag_low_thresh. Contains an
integer with the number of bytes.
neigh/*
See arp(7).
Ioctls
All ioctls described in socket(7) apply to ip.
Ioctls to configure generic device parameters are described in netde‐
vice(7).
ERRORS
EACCES The user tried to execute an operation without the necessary
permissions. These include: sending a packet to a broadcast
address without having the SO_BROADCAST flag set; sending a
packet via a prohibit route; modifying firewall settings without
superuser privileges (the CAP_NET_ADMIN capability); binding to
a privileged port without superuser privileges (the
CAP_NET_BIND_SERVICE capability).
EADDRINUSE
Tried to bind to an address already in use.
EADDRNOTAVAIL
A nonexistent interface was requested or the requested source
address was not local.
EAGAIN Operation on a nonblocking socket would block.
EALREADY
An connection operation on a nonblocking socket is already in
progress.
ECONNABORTED
A connection was closed during an accept(2).
EHOSTUNREACH
No valid routing table entry matches the destination address.
This error can be caused by a ICMP message from a remote router
or for the local routing table.
EINVAL Invalid argument passed. For send operations this can be caused
by sending to a blackhole route.
EISCONN
connect(2) was called on an already connected socket.
EMSGSIZE
Datagram is bigger than an MTU on the path and it cannot be
fragmented.
ENOBUFS, ENOMEM
Not enough free memory. This often means that the memory allo‐
cation is limited by the socket buffer limits, not by the system
memory, but this is not 100% consistent.
ENOENT SIOCGSTAMP was called on a socket where no packet arrived.
ENOPKG A kernel subsystem was not configured.
ENOPROTOOPT and EOPNOTSUPP
Invalid socket option passed.
ENOTCONN
The operation is defined only on a connected socket, but the
socket wasn't connected.
EPERM User doesn't have permission to set high priority, change con‐
figuration, or send signals to the requested process or group.
EPIPE The connection was unexpectedly closed or shut down by the other
end.
ESOCKTNOSUPPORT
The socket is not configured or an unknown socket type was
requested.
Other errors may be generated by the overlaying protocols; see tcp(7),
raw(7), udp(7) and socket(7).
NOTES
IP_FREEBIND, IP_MSFILTER, IP_MTU, IP_MTU_DISCOVER, IP_RECVORIGDSTADDR,
IP_PKTINFO, IP_RECVERR, IP_ROUTER_ALERT, and IP_TRANSPARENT are Linux-
specific.
Be very careful with the SO_BROADCAST option - it is not privileged in
Linux. It is easy to overload the network with careless broadcasts.
For new application protocols it is better to use a multicast group
instead of broadcasting. Broadcasting is discouraged.
Some other BSD sockets implementations provide IP_RCVDSTADDR and
IP_RECVIF socket options to get the destination address and the inter‐
face of received datagrams. Linux has the more general IP_PKTINFO for
the same task.
Some BSD sockets implementations also provide an IP_RECVTTL option, but
an ancillary message with type IP_RECVTTL is passed with the incoming
packet. This is different from the IP_TTL option used in Linux.
Using SOL_IP socket options level isn't portable, BSD-based stacks use
IPPROTO_IP level.
Compatibility
For compatibility with Linux 2.0, the obsolete socket(AF_INET,
SOCK_PACKET, protocol) syntax is still supported to open a packet(7)
socket. This is deprecated and should be replaced by socket(AF_PACKET,
SOCK_RAW, protocol) instead. The main difference is the new sock‐
addr_ll address structure for generic link layer information instead of
the old sockaddr_pkt.
BUGS
There are too many inconsistent error values.
The ioctls to configure IP-specific interface options and ARP tables
are not described.
Some versions of glibc forget to declare in_pktinfo. Workaround cur‐
rently is to copy it into your program from this man page.
Receiving the original destination address with MSG_ERRQUEUE in
msg_name by recvmsg(2) does not work in some 2.2 kernels.
SEE ALSOrecvmsg(2), sendmsg(2), byteorder(3), ipfw(4), capabilities(7),
icmp(7), ipv6(7), netlink(7), raw(7), socket(7), tcp(7), udp(7)
RFC 791 for the original IP specification. RFC 1122 for the IPv4 host
requirements. RFC 1812 for the IPv4 router requirements.
COLOPHON
This page is part of release 3.53 of the Linux man-pages project. A
description of the project, and information about reporting bugs, can
be found at http://www.kernel.org/doc/man-pages/.
Linux 2013-04-16 IP(7)
