init man page on 4.4BSD

Man page or keyword search:  
man Server   1065 pages
apropos Keyword Search (all sections)
Output format
4.4BSD logo
[printable version]

INIT(8)			  BSD System Manager's Manual		       INIT(8)

NAME
     init — process control initialization

SYNOPSIS
     init

DESCRIPTION
     The init program is the last stage of the boot process.  It normally runs
     the automatic reboot sequence as described in reboot(8), and if this suc‐
     ceeds, begins multi-user operation.  If the reboot scripts fail, init
     commences single user operation by giving the super-user a shell on the
     console.  The init program may be passed parameters from the boot program
     to prevent the system from going multi-user and to instead execute a sin‐
     gle user shell without starting the normal daemons.  The system is then
     quiescent for maintenance work and may later be made to go to multi-user
     by exiting the single-user shell (with ^D).  This causes init to run the
     /etc/rc start up command file in fastboot mode (skipping disk checks).

     If the console entry in the ttys(5) file is marked ``insecure'', then
     init will require that the superuser password be entered before the sys‐
     tem will start a single-user shell.  The password check is skipped if the
     console is marked as ``secure''.

     The kernel runs with four different levels of security.  Any superuser
     process can raise the security level, but only init can lower it.	Secu‐
     rity levels are defined as follows:

     -1	   Permanently insecure mode - always run system in level 0 mode.

     0	   Insecure mode - immutable and append-only flags may be turned off.
	   All devices may be read or written subject to their permissions.

     1	   Secure mode - immutable and append-only flags may not be changed;
	   disks for mounted filesystems, /dev/mem, and /dev/kmem are read-
	   only.  The settimeofday(2) system call can only advance the time.

     2	   Highly secure mode - same as secure mode, plus disks are always
	   read-only whether mounted or not.  This level precludes tampering
	   with filesystems by unmounting them, but also inhibits running
	   newfs(8) while the system is multi-user.

     Normally, the system runs in level 0 mode while single user and in level
     1 mode while multiuser.  If the level 2 mode is desired while running
     multiuser, it can be set in the startup script /etc/rc using sysctl(8).
     If it is desired to run the system in level 0 mode while multiuser, the
     administrator must build a kernel with the variable securelevel defined
     in the file /sys/compile/MACHINE/param.c and initialize it to -1.

     In multi-user operation, init maintains processes for the terminal ports
     found in the file ttys(5).	 Init reads this file, and executes the com‐
     mand found in the second field.  This command is usually getty(8); getty
     opens and initializes the tty line and executes the login program.	 The
     login program, when a valid user logs in, executes a shell for that user.
     When this shell dies, either because the user logged out or an abnormal
     termination occurred (a signal), the init program wakes up, deletes the
     user from the utmp(5) file of current users and records the logout in the
     wtmp file.	 The cycle is then restarted by init executing a new getty for
     the line.

     Line status (on, off, secure, getty, or window information) may be
     changed in the ttys file without a reboot by sending the signal SIGHUP to
     init with the command “kill -s HUP 1”.  On receipt of this signal, init
     re-reads the ttys file.  When a line is turned off in ttys, init will
     send a SIGHUP signal to the controlling process for the session associ‐
     ated with the line.  For any lines that were previously turned off in the
     ttys file and are now on, init executes a new getty to enable a new
     login.  If the getty or window field for a line is changed, the change
     takes effect at the end of the current login session (e.g., the next time
     init starts a process on the line).  If a line is commented out or
     deleted from ttys, init will not do anything at all to that line.	How‐
     ever, it will complain that the relationship between lines in the ttys
     file and records in the utmp file is out of sync, so this practice is not
     recommended.

     Init will terminate multi-user operations and resume single-user mode if
     sent a terminate (TERM) signal, for example, “kill -s TERM 1”.  If there
     are processes outstanding that are deadlocked (because of hardware or
     software failure), init will not wait for them all to die (which might
     take forever), but will time out after 30 seconds and print a warning
     message.

     Init will cease creating new getty's and allow the system to slowly die
     away, if it is sent a terminal stop (TSTP) signal, i.e.  “kill -s TSTP
     1”.  A later hangup will resume full multi-user operations, or a termi‐
     nate will start a single user shell.  This hook is used by reboot(8) and
     halt(8).

     The role of init is so critical that if it dies, the system will reboot
     itself automatically.  If, at bootstrap time, the init process cannot be
     located, the system will panic with the message ``panic: "init died (sig‐
     nal %d, exit %d)''.

DIAGNOSTICS
     getty repeating too quickly on port %s, sleeping  A process being started
     to service a line is exiting quickly each time it is started.  This is
     often caused by a ringing or noisy terminal line.	Init will sleep for 10
     seconds, then continue trying to start the process.

     some processes would not die; ps axl advised.  A process is hung and
     could not be killed when the system was shutting down.  This condition is
     usually caused by a process that is stuck in a device driver because of a
     persistent device error condition.

FILES
     /dev/console   System console device.
     /dev/tty*	    Terminal ports found in ttys.
     /var/run/utmp  Record of Current users on the system.
     /var/log/wtmp  Record of all logins and logouts.
     /etc/ttys	    The terminal initialization information file.
     /etc/rc	    System startup commands.

SEE ALSO
     login(1), kill(1), sh(1), ttys(5), crash(8), getty(8), rc(8), reboot(8),
     halt(8), shutdown(8)

HISTORY
     A init command appeared in Version 6 AT&T UNIX.

BUGS
     Systems without sysctl behave as though they have security level -1.

4th Berkeley Distribution	 May 26, 1995	     4th Berkeley Distribution
[top]

List of man pages available for 4.4BSD

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net