gnutv(1)gnutv(1)NAMEgnutv - a digital tv utility.
SYNOPSISgnutv [options]<channelname>
DESCRIPTION
This manual page documents briefly the gnutv commands.
gnutv is a digital tv utility.
OPTIONS-adapter <id>
adapter to use (default 0)
-frontend <id>
frontend to use (default 0)
-demux <id>
demux to use (default 0)
-caslotnum <id>
ca slot number to use (default 0)
-channels <filename>
channels.conf file
-secfile <filename>
Optional sec.conf file
-secid <secid>
ID of the SEC configuration to use, one of: * UNIVERSAL
(default) - Europe, 10800 to 11800 MHz and 11600 to 12700
Mhz, Dual LO, loband 9750, hiband 10600 MHz * DBS -
Expressvu, North America, 12200 to 12700 MHz, Single LO, 11250
MHz * STANDARD - 10945 to 11450 Mhz, Single LO, 10000 Mhz
* ENHANCED - Astra, 10700 to 11700 MHz, Single LO, 9750 MHz
* C-BAND - Big Dish, 3700 to 4200 MHz, Single LO, 5150 Mhz
* C-MULTI - Big Dish - Multipoint LNBf, 3700 to 4200 MHz,
Dual LO, H:5150MHz, V:5750MHz * One of the sec definitions
from the secfile if supplied
-out decoder
Output to hardware decoder (default)
-out decoderabypass
Output to hardware decoder using audio bypass -out dvr Output
stream to dvr device -out null Do not output anything -out std‐
out Output to stdout -out file <filename> Output stream to file
-out udp <address> <port> Output stream to address:port using
udp -out udpif <address> <port> <interface> Output stream to
address:port using udp forcing the specified interface -out rtp
<address> <port> Output stream to address:port using udp-rtp
-out rtpif <address> <port> <interface> Output stream to
address:port using udp-rtp forcing the specified interface
-timeout <secs>
Number of seconds to output channel for (0=>exit immediately
after successful tuning, default is to output forever)
-cammenu
Show the CAM menu
-nomoveca
Do not attempt to move CA descriptors from stream to programme
level -h print this help text
This manual page was written by Uwe Bugla <uwe.bugla@gmx.de>.
February 14, 2010 gnutv(1)