GIT-FETCH(1) Git Manual GIT-FETCH(1)NAMEgit-fetch - Download objects and refs from another repository
SYNOPSIS
git fetch <options> <repository> <refspec>...
git fetch <options> <group>
git fetch --multiple <options> [<repository> | <group>]...
git fetch --all <options>
DESCRIPTION
Fetches named heads or tags from one or more other repositories, along
with the objects necessary to complete them.
The ref names and their object names of fetched refs are stored in
.git/FETCH_HEAD. This information is left for a later merge operation
done by git merge.
When <refspec> stores the fetched result in tracking branches, the tags
that point at these branches are automatically followed. This is done
by first fetching from the remote using the given <refspec>s, and if
the repository has objects that are pointed by remote tags that it does
not yet have, then fetch those missing tags. If the other end has tags
that point at branches you are not interested in, you will not get
them.
git fetch can fetch from either a single named repository, or or from
several repositories at once if <group> is given and there is a
remotes.<group> entry in the configuration file. (See git-config(1)).
OPTIONS--all
Fetch all remotes.
-a, --append
Append ref names and object names of fetched refs to the existing
contents of .git/FETCH_HEAD. Without this option old data in
.git/FETCH_HEAD will be overwritten.
--depth=<depth>
Deepen the history of a shallow repository created by git clone
with --depth=<depth> option (see git-clone(1)) by the specified
number of commits.
--dry-run
Show what would be done, without making any changes.
-f, --force
When git fetch is used with <rbranch>:<lbranch> refspec, it refuses
to update the local branch <lbranch> unless the remote branch
<rbranch> it fetches is a descendant of <lbranch>. This option
overrides that check.
-k, --keep
Keep downloaded pack.
--multiple
Allow several <repository> and <group> arguments to be specified.
No <refspec>s may be specified.
--prune
After fetching, remove any remote tracking branches which no longer
exist on the remote.
-n, --no-tags
By default, tags that point at objects that are downloaded from the
remote repository are fetched and stored locally. This option
disables this automatic tag following.
-t, --tags
Most of the tags are fetched automatically as branch heads are
downloaded, but tags that do not point at objects reachable from
the branch heads that are being tracked will not be fetched by this
mechanism. This flag lets all tags and their associated objects be
downloaded.
-u, --update-head-ok
By default git fetch refuses to update the head which corresponds
to the current branch. This flag disables the check. This is purely
for the internal use for git pull to communicate with git fetch,
and unless you are implementing your own Porcelain you are not
supposed to use it.
--upload-pack <upload-pack>
When given, and the repository to fetch from is handled by git
fetch-pack, --exec=<upload-pack> is passed to the command to
specify non-default path for the command run on the other end.
-q, --quiet
Pass --quiet to git-fetch-pack and silence any other internally
used git commands.
-v, --verbose
Be verbose.
<repository>
The "remote" repository that is the source of a fetch or pull
operation. This parameter can be either a URL (see the section GIT
URLS below) or the name of a remote (see the section REMOTES
below).
<group>
A name referring to a list of repositories as the value of
remotes.<group> in the configuration file. (See git-config(1)).
<refspec>
The format of a <refspec> parameter is an optional plus +, followed
by the source ref <src>, followed by a colon :, followed by the
destination ref <dst>.
The remote ref that matches <src> is fetched, and if <dst> is not
empty string, the local ref that matches it is fast-forwarded using
<src>. If the optional plus + is used, the local ref is updated
even if it does not result in a fast-forward update.
Note
If the remote branch from which you want to pull is modified in
non-linear ways such as being rewound and rebased frequently,
then a pull will attempt a merge with an older version of
itself, likely conflict, and fail. It is under these conditions
that you would want to use the + sign to indicate
non-fast-forward updates will be needed. There is currently no
easy way to determine or declare that a branch will be made
available in a repository with this behavior; the pulling user
simply must know this is the expected usage pattern for a
branch.
Note
You never do your own development on branches that appear on
the right hand side of a <refspec> colon on Pull: lines; they
are to be updated by git fetch. If you intend to do development
derived from a remote branch B, have a Pull: line to track it
(i.e. Pull: B:remote-B), and have a separate branch my-B to do
your development on top of it. The latter is created by git
branch my-B remote-B (or its equivalent git checkout -b my-B
remote-B). Run git fetch to keep track of the progress of the
remote side, and when you see something new on the remote
branch, merge it into your development branch with git pull .
remote-B, while you are on my-B branch.
Note
There is a difference between listing multiple <refspec>
directly on git pull command line and having multiple Pull:
<refspec> lines for a <repository> and running git pull command
without any explicit <refspec> parameters. <refspec> listed
explicitly on the command line are always merged into the
current branch after fetching. In other words, if you list more
than one remote refs, you would be making an Octopus. While git
pull run without any explicit <refspec> parameter takes default
<refspec>s from Pull: lines, it merges only the first <refspec>
found into the current branch, after fetching all the remote
refs. This is because making an Octopus from remote refs is
rarely done, while keeping track of multiple remote heads in
one-go by fetching more than one is often useful.
Some short-cut notations are also supported.
· tag <tag> means the same as refs/tags/<tag>:refs/tags/<tag>;
it requests fetching everything up to the given tag.
· A parameter <ref> without a colon is equivalent to <ref>: when
pulling/fetching, so it merges <ref> into the current branch
without storing the remote branch anywhere locally
GIT URLS
One of the following notations can be used to name the remote
repository:
· rsync://host.xz/path/to/repo.git/
· http://host.xz[:port]/path/to/repo.git/
· https://host.xz[:port]/path/to/repo.git/
· git://host.xz[:port]/path/to/repo.git/
· git://host.xz[:port]/~user/path/to/repo.git/
· ssh://[user@]host.xz[:port]/path/to/repo.git/
· ssh://[user@]host.xz/path/to/repo.git/
· ssh://[user@]host.xz/~user/path/to/repo.git/
· ssh://[user@]host.xz/~/path/to/repo.git
SSH is the default transport protocol over the network. You can
optionally specify which user to log-in as, and an alternate, scp-like
syntax is also supported. Both syntaxes support username expansion, as
does the native git protocol, but only the former supports port
specification. The following three are identical to the last three
above, respectively:
· [user@]host.xz:/path/to/repo.git/
· [user@]host.xz:~user/path/to/repo.git/
· [user@]host.xz:path/to/repo.git
To sync with a local directory, you can use:
· /path/to/repo.git/
· file:///path/to/repo.git/
They are mostly equivalent, except when cloning. See git-clone(1) for
details.
If there are a large number of similarly-named remote repositories and
you want to use a different format for them (such that the URLs you use
will be rewritten into URLs that work), you can create a configuration
section of the form:
[url "<actual url base>"]
insteadOf = <other url base>
For example, with this:
[url "git://git.host.xz/"]
insteadOf = host.xz:/path/to/
insteadOf = work:
a URL like "work:repo.git" or like "host.xz:/path/to/repo.git" will be
rewritten in any context that takes a URL to be
"git://git.host.xz/repo.git".
If you want to rewrite URLs for push only, you can create a
configuration section of the form:
[url "<actual url base>"]
pushInsteadOf = <other url base>
For example, with this:
[url "ssh://example.org/"]
pushInsteadOf = git://example.org/
a URL like "git://example.org/path/to/repo.git" will be rewritten to
"ssh://example.org/path/to/repo.git" for pushes, but pulls will still
use the original URL.
REMOTES
The name of one of the following can be used instead of a URL as
<repository> argument:
· a remote in the git configuration file: $GIT_DIR/config,
· a file in the $GIT_DIR/remotes directory, or
· a file in the $GIT_DIR/branches directory.
All of these also allow you to omit the refspec from the command line
because they each contain a refspec which git will use by default.
Named remote in configuration file
You can choose to provide the name of a remote which you had previously
configured using git-remote(1), git-config(1) or even by a manual edit
to the $GIT_DIR/config file. The URL of this remote will be used to
access the repository. The refspec of this remote will be used by
default when you do not provide a refspec on the command line. The
entry in the config file would appear like this:
[remote "<name>"]
url = <url>
pushurl = <pushurl>
push = <refspec>
fetch = <refspec>
The <pushurl> is used for pushes only. It is optional and defaults to
<url>.
Named file in $GIT_DIR/remotes
You can choose to provide the name of a file in $GIT_DIR/remotes. The
URL in this file will be used to access the repository. The refspec in
this file will be used as default when you do not provide a refspec on
the command line. This file should have the following format:
URL: one of the above URL format
Push: <refspec>
Pull: <refspec>
Push: lines are used by git push and Pull: lines are used by git pull
and git fetch. Multiple Push: and Pull: lines may be specified for
additional branch mappings.
Named file in $GIT_DIR/branches
You can choose to provide the name of a file in $GIT_DIR/branches. The
URL in this file will be used to access the repository. This file
should have the following format:
<url>#<head>
<url> is required; #<head> is optional.
Depending on the operation, git will use one of the following refspecs,
if you don’t provide one on the command line. <branch> is the name of
this file in $GIT_DIR/branches and <head> defaults to master.
git fetch uses:
refs/heads/<head>:refs/heads/<branch>
git push uses:
HEAD:refs/heads/<head>
EXAMPLES
· Update the remote-tracking branches:
$ git fetch origin
The above command copies all branches from the remote refs/heads/
namespace and stores them to the local refs/remotes/origin/
namespace, unless the branch.<name>.fetch option is used to specify
a non-default refspec.
· Using refspecs explicitly:
$ git fetch origin +pu:pu maint:tmp
This updates (or creates, as necessary) branches pu and tmp in the
local repository by fetching from the branches (respectively) pu
and maint from the remote repository.
The pu branch will be updated even if it is does not fast-forward,
because it is prefixed with a plus sign; tmp will not be.
SEE ALSOgit-pull(1)AUTHOR
Written by Linus Torvalds <torvalds@osdl.org[1]> and Junio C Hamano
<gitster@pobox.com[2]>
DOCUMENTATION
Documentation by David Greaves, Junio C Hamano and the git-list
<git@vger.kernel.org[3]>.
GIT
Part of the git(1) suite
NOTES
1. torvalds@osdl.org
mailto:torvalds@osdl.org
2. gitster@pobox.com
mailto:gitster@pobox.com
3. git@vger.kernel.org
mailto:git@vger.kernel.org
Git 1.7.0.4 12/18/2010 GIT-FETCH(1)
