getpmsg man page on OpenIndiana

Man page or keyword search:  
man Server   20441 pages
apropos Keyword Search (all sections)
Output format
OpenIndiana logo
[printable version]

getmsg(2)			 System Calls			     getmsg(2)

NAME
       getmsg, getpmsg - get next message off a stream

SYNOPSIS
       #include <stropts.h>

       int getmsg(int fildes, struct strbuf *restrict ctlptr,
	    struct strbuf *restrict dataptr, int *restrict flagsp);

       int getpmsg(int fildes, struct strbuf *restrict ctlptr,
	    struct strbuf *restrict dataptr, int *restrict bandp,
	    int *restrict flagsp);

DESCRIPTION
       The  getmsg()  function	retrieves  the	contents  of  a	 message  (see
       Intro(2)) located at  the stream head read queue from a	STREAMS	 file,
       and places the contents into user specified buffer(s). The message must
       contain either a data part, a control part, or both. The data and  con‐
       trol  parts  of	the  message  are  placed  into	 separate buffers,  as
       described below. The semantics of each part is defined by  the  STREAMS
       module that generated the message.

       The   getpmsg() function behaved like getmsg(), but provides finer con‐
       trol over the priority of the messages received.	 Except	 where	noted,
       all information pertaining to getmsg() also pertains to getpmsg().

       The  fildes  argument  specifies	 a file descriptor referencing an open
       stream.	The ctlptr and dataptr arguments each point to a strbuf struc‐
       ture, which contains the following members:

	 int	maxlen;	     /* maximum buffer length */
	 int	len;	     /* length of data */
	 char	*buf;	     /* ptr to buffer */

       The buf member points to a buffer into which the data or control infor‐
       mation is to be placed, and the maxlen  member  indicates  the  maximum
       number  of  bytes  this buffer can hold. On return, the len member con‐
       tains the number of bytes  of  data  or	control	 information  actually
       received; 0 if there is a zero-length control or data part; or −1 if no
       data or control information is present in the message. The flagsp argu‐
       ment  should point to an integer that indicates the type of message the
       user is able to receive, as described below.

       The ctlptr argument holds the control part from	the  message  and  the
       dataptr	argument   holds the data part from the message. If ctlptr (or
       dataptr) is NULL or the maxlen member is −1,   the  control  (or	 data)
       part  of	 the  message  is not processed and is left on the stream head
       read queue. If ctlptr (or dataptr) is not NULL and there is  no	corre‐
       sponding control (or data) part of the messages on the stream head read
       queue, len is set to −1. If the maxlen member is set to 0 and there  is
       a zero-length control (or data)	part, that zero-length part is removed
       from the read queue and len is set to 0. If the maxlen member is set to
       0  and there are more than zero bytes of control (or data) information,
       that information is left on the read queue and len is set to 0. If  the
       maxlen  member  in  ctlptr  or dataptr is less than,  respectively, the
       control or data part of the message, maxlen bytes  are	retrieved.  In
       this case, the remainder of the message is left on the stream head read
       queue and a non-zero return value is provided, as described below under
       RETURN VALUES.

       By  default,  getmsg()  processes  the  first  available message on the
       stream head read queue. A user may, however, choose  to	retrieve  only
       high  priority messages by setting  the integer pointed to by flagsp to
       RS_HIPRI. In this case, getmsg() processes the next message only if  it
       is a high priority message.

       If  the	integer pointed to by flagsp is 0, getmsg() retrieves any mes‐
       sage available on the stream head read queue. In this case, on  return,
       the  integer  pointed  to  by flagsp will be set to  RS_HIPRI if a high
       priority message was retrieved, or to 0 otherwise.

       For getpmsg(), the flagsp argument points to a bitmask with the follow‐
       ing mutually-exclusive flags defined: MSG_HIPRI, MSG_BAND, and MSG_ANY.
       Like getmsg(), getpmsg() processes the first available message  on  the
       stream  head read queue. A user may choose to retrieve only high-prior‐
       ity messages by setting the integer pointed to by flagsp	 to  MSG_HIPRI
       and  the integer pointed to by bandp to 0. In this case, getpmsg() will
       only process the next message if it is a high-priority  message.	 In  a
       similar manner, a user may choose to retrieve a message from a particu‐
       lar priority band by setting  the  integer  pointed  to	by  flagsp  to
       MSG_BAND	 and  the  integer pointed to by bandp to the priority band of
       interest. In this case, getpmsg() will only process the next message if
       it is in a priority band equal to, or greater than, the integer pointed
       to by bandp, or if it is a high-priority message. If a user just	 wants
       to  get	the  first  message  off  the queue, the integer pointed to by
       flagsp should be set to MSG_ANY and the integer	pointed	 to  by	 bandp
       should be set to 0. On return, if the message retrieved was a high-pri‐
       ority message, the  integer  pointed  to	 by  flagsp  will  be  set  to
       MSG_HIPRI  and the integer pointed to by bandp will be set to 0. Other‐
       wise, the integer pointed to by flagsp will be set to MSG_BAND and  the
       integer	pointed	 to  by	 bandp will be set to the priority band of the
       message.

       If O_NDELAY and O_NONBLOCK are clear, getmsg() blocks until  a  message
       of  the	type  specified by flagsp is available on the stream head read
       queue. If O_NDELAY or O_NONBLOCK has been set  and  a  message  of  the
       specified  type	is  not	 present on the read queue, getmsg() fails and
       sets errno to EAGAIN.

       If a hangup occurs  on  the  stream  from  which	 messages  are	to  be
       retrieved,  getmsg() continues to operate normally, as described above,
       until the  stream head read queue is empty. Thereafter, it returns 0 in
       the len member of ctlptr and dataptr.

RETURN VALUES
       Upon  successful completion, a non-negative value is returned. A return
       value of 0 indicates that a  full  message  was	read  successfully.  A
       return  value  of  MORECTL  indicates  that more control information is
       waiting for retrieval. A return value of MOREDATA indicates  that  more
       data  are  waiting  for retrieval. A return value of MORECTL | MOREDATA
       indicates that both types of information	 remain.  Subsequent  getmsg()
       calls  retrieve	the remainder of the message. However, if a message of
       higher priority has been received by the stream head  read  queue,  the
       next call to getmsg() will retrieve that higher priority message before
       retrieving the remainder of the previously received partial message.

ERRORS
       The getmsg() and getpmsg() functions will fail if:

       EAGAIN	  The O_NDELAY or O_NONBLOCK flag is set and no	 messages  are
		  available.

       EBADF	  The  fildes argument is not a valid file descriptor open for
		  reading.

       EBADMSG	  Queued message to be read is not valid for getmsg.

       EFAULT	  The ctlptr, dataptr, bandp, or flagsp argument points to  an
		  illegal address.

       EINTR	  A signal was caught during the execution of the getmsg func‐
		  tion.

       EINVAL	  An illegal value was specified in flagsp, or the stream ref‐
		  erenced by fildes is linked under a multiplexor.

       ENOSTR	  A stream is not associated with fildes.

       The getmsg() function can also fail if a STREAMS error message had been
       received at the stream head before the  call  to	 getmsg().  The	 error
       returned is the value contained in the STREAMS error message.

ATTRIBUTES
       See attributes(5) for descriptions of the following attributes:

       ┌─────────────────────────────┬─────────────────────────────┐
       │      ATTRIBUTE TYPE	     │	    ATTRIBUTE VALUE	   │
       ├─────────────────────────────┼─────────────────────────────┤
       │Interface Stability	     │Standard			   │
       └─────────────────────────────┴─────────────────────────────┘

SEE ALSO
       Intro(2),  poll(2),  putmsg(2), read(2), write(2), attributes(5), stan‐
       dards(5)

       STREAMS Programming Guide

SunOS 5.11			  1 Nov 2001			     getmsg(2)
[top]

List of man pages available for OpenIndiana

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net