freeipmi.conf man page on Scientific
[printable version]
FREEIPMI(5) Configuration FREEIPMI(5)
NAME
freeipmi.conf - specify default values to FreeIPMI
DESCRIPTION
The FreeIPMI configuration file can be used to set alternate default
values to many FreeIPMI tools so values don't have to be configured on
the command line. This allows users to avoid typing in a long list of
command line options everytime a command is executed. It can also be
used to hide usernames, passwords, and other sensitive information from
the ps(1) command.
Currently, the tools that can be configured with the configuration file
are: bmc-config(8), bmc-device(8), bmc-info(8), bmc-watchdog(8), ipmi-
chassis(8), ipmi-chassis-config(8), ipmi-fru(8), ipmi-oem(8), ipmi-pef-
config(8), ipmi-pet(8), ipmi-raw(8), ipmi-sel(8), ipmi-sensors(8),
ipmi-sensors-config(8), ipmiconsole(8), and ipmipower(8).
By default, the configuration file is stored at /etc//freeipmi.conf.
But users may select a different configuration file at the command line
with the --config-file option.
Values specified on the command line override the configuration values
specified in the configuration file.
FORMAT
The configuration options that can be specified in the configuration
file are listed below. Each configuration option must be listed on a
separate line. Arguments for an option are separated by any amount of
whitespace. Multiple arguments are also separated by whitespace. Com‐
ments can be marked by using the pound sign ("#") character, and lines
can be continued on the next using backslash ("\").
Note that it is possible to list the username, password and other
potentially sensitive information in the configuration file. If this
data is stored in a configuration file, system administrators should
limit access to this file.
GENERAL OPTIONS
The following options are options generally available to all tools,
although specific options may be ignored by some. (For example, ipmi‐
console(8) and ipmipower(8) do not perform in-band communication,
therefore they would ignore in-band communication options. Similarly
bmc-watchdog(8) does not perform out-of-band communication, therefore
it would ignore all out-of-band options).
driver-type IPMIDRIVER
Specify the default driver type to use.
disable-auto-probe ENABLE|DISABLE
Specify if IPMI devices should be probed for default settings.
driver-address DRIVER-ADDRESS
Specify the default in-band driver address to use.
driver-device DEVICE
Specify the default in-band driver device path to use.
register-spacing REGISTER-SPACING
Specify the default in-band driver register spacing to use.
target-channel-number CHANNEL-NUMBER
Specify the default in-band driver target channel number.
target-slave-address SLAVE-ADDRESS
Specify the default in-band driver target slave address.
username USERNAME
Specify the default username to use.
password PASSWORD
Specify the default password to use.
k_g str
Specify the default BMC key (K_g) to use. Prefix with '0x' to
enter the key in hex.
session-timeout MILLISECONDS
Specify the default session timeout length to use in millisec‐
onds.
retransmission-timeout MILLISECONDS
Specify the default retransmission timeout length to use in mil‐
liseconds.
authentication-type AUTHENTICATION-TYPE
Specify the default authentication type to use. The following
authentication types are supported: NONE, STRAIGHT_PASSWORD_KEY,
MD2, and MD5.
cipher-suite-id CIPHER-SUITE-ID
Specify the default cipher suite id to use. The following cipher
suite ids are supported: 0, 1, 2, 3, 6, 7, 8, 11, 12.
privilege-level PRIVILEGE-LEVEL
Specify the default privilege type to use. The following privi‐
lege levels are supported: USER, OPERATOR, ADMIN.
workaround-flags WORKAROUNDS
Specify default workaround flags to use. Multiple workarounds
can be specified separated by whitespace. Please see tool man‐
pages for details about available workarounds for each tool. The
following workarounds are supported: assumeio, spinpoll, idzero,
forcepermsg, unexpectedauth, endianseq, authcap, intel20, super‐
micro20, sun20, opensesspriv, integritycheckvalue, assumemaxsdr‐
recordcount, solpayloadsize, solport, solstatus, skipchecks,
assumesystemevent, discretereading, ignorescanningdisabled,
assumebmcowner, ignoreauthcode, slowcommit, veryslowcommit,
solchannelassumelanchannel, ignorestateflag, malformedack.
SDR OPTIONS
The following options are specific to tools that use the sensor data
repository (SDR). They will be ignored by all other tools.
quiet-cache ENABLE|DISABLE
Specify if cache creation/deletion information should not be
output by default.
sdr-cache-directory DIRECTORY
Specify the default sdr cache directory to use.
HOSTRANGED OPTIONS
The following options are specific to tools that support hostranged
output. They will be ignored by all other tools.
buffer-output ENABLE|DISABLE
Specify if hostranged output should be buffered by default.
consolidate-output ENABLE|DISABLE
Specify if hostranged output should be consolidated by default.
fanout COUNT
Specify the default multiple host fanout to use.
eliminate ENABLE|DISABLE
Specify if undetected hosts should be eliminated by default.
always-prefix ENABLE|DISABLE
Specify if output should be always prefixed by default.
BMC-CONFIG OPTIONS
The following options are specific to bmc-config(8). They will be
ignored by other tools.
bmc-config-username USERNAME
Specify the default username to use for bmc-config(8). If spec‐
ified, will override the general option username above.
bmc-config-password PASSWORD
Specify the default password to use for bmc-config(8). If spec‐
ified, will override the general option password above.
bmc-config-k_g str
Specify the default BMC key (K_g) to use for bmc-config(8). If
specified, will override the general option k_g above. Prefix
with '0x' to enter the key in hex.
bmc-config-authentication-type AUTHENTICATION-TYPE
Specify the default authentication type to use for bmc-con‐
fig(8). If specified, will override the general option authen‐
tication-type above. The following authentication types are sup‐
ported: NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.
bmc-config-cipher-suite-id CIPHER-SUITE-ID
Specify the default cipher suite id to use for bmc-config(8).
If specified, will override the general option cipher-suite-id
above. The following cipher suite ids are supported: 0, 1, 2, 3,
6, 7, 8, 11, 12.
bmc-config-privilege-level PRIVILEGE-LEVEL
Specify the default privilege type to use for bmc-config(8). If
specified, will override the general option privilege-level
above. The following privilege levels are supported: USER, OPER‐
ATOR, ADMIN.
bmc-config-workaround-flags WORKAROUNDS
Specify default workaround flags to use for bmc-config(8). If
specified, will override the general options workaround-flags
above. Multiple workarounds can be specified separated by white‐
space. Please see bmc-config(8) manpage for available work‐
arounds.
bmc-config-verbose-count COUNT
Specify default verbose count to use for bmc-config(8).
BMC-DEVICE OPTIONS
The following options are specific to bmc-device(8). They will be
ignored by other tools.
bmc-device-username USERNAME
Specify the default username to use for bmc-device(8). If spec‐
ified, will override the general option username above.
bmc-device-password PASSWORD
Specify the default password to use for bmc-device(8). If spec‐
ified, will override the general option password above.
bmc-device-k_g str
Specify the default BMC key (K_g) to use for bmc-device(8). If
specified, will override the general option k_g above. Prefix
with '0x' to enter the key in hex.
bmc-device-authentication-type AUTHENTICATION-TYPE
Specify the default authentication type to use for bmc-
device(8). If specified, will override the general option
authentication-type above. The following authentication types
are supported: NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.
bmc-device-cipher-suite-id CIPHER-SUITE-ID
Specify the default cipher suite id to use for bmc-device(8).
If specified, will override the general option cipher-suite-id
above. The following cipher suite ids are supported: 0, 1, 2, 3,
6, 7, 8, 11, 12.
bmc-device-privilege-level PRIVILEGE-LEVEL
Specify the default privilege type to use for bmc-device(8). If
specified, will override the general option privilege-level
above. The following privilege levels are supported: USER, OPER‐
ATOR, ADMIN.
bmc-device-workaround-flags WORKAROUNDS
Specify default workaround flags to use for bmc-device(8). If
specified, will override the general options workaround-flags
above. Multiple workarounds can be specified separated by white‐
space. Please see bmc-device(8) manpage for available work‐
arounds.
BMC-INFO OPTIONS
The following options are specific to bmc-info(8). They will be
ignored by other tools.
bmc-info-username USERNAME
Specify the default username to use for bmc-info(8). If speci‐
fied, will override the general option username above.
bmc-info-password PASSWORD
Specify the default password to use for bmc-info(8). If speci‐
fied, will override the general option password above.
bmc-info-k_g str
Specify the default BMC key (K_g) to use for bmc-info(8). If
specified, will override the general option k_g above. Prefix
with '0x' to enter the key in hex.
bmc-info-authentication-type AUTHENTICATION-TYPE
Specify the default authentication type to use for bmc-info(8).
If specified, will override the general option authentication-
type above. The following authentication types are supported:
NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.
bmc-info-cipher-suite-id CIPHER-SUITE-ID
Specify the default cipher suite id to use for bmc-info(8). If
specified, will override the general option cipher-suite-id
above. The following cipher suite ids are supported: 0, 1, 2, 3,
6, 7, 8, 11, 12.
bmc-info-privilege-level PRIVILEGE-LEVEL
Specify the default privilege type to use for bmc-info(8). If
specified, will override the general option privilege-level
above. The following privilege levels are supported: USER, OPER‐
ATOR, ADMIN.
bmc-info-workaround-flags WORKAROUNDS
Specify default workaround flags to use for bmc-info(8). If
specified, will override the general options workaround-flags
above. Multiple workarounds can be specified separated by white‐
space. Please see bmc-info(8) manpage for available work‐
arounds.
bmc-info-interpret-oem-data ENABLE|DISABLE
Specify if bmc-info should attempt to interpret OEM data by
default or not.
BMC-WATCHDOG OPTIONS
The following options are specific to bmc-watchdog(8). They will be
ignored by other tools.
bmc-watchdog-workaround-flags WORKAROUNDS
Specify default workaround flags to use for bmc-watchdog(8). If
specified, will override the general options workaround-flags
above. Multiple workarounds can be specified separated by white‐
space. Please see bmc-watchdog(8) manpage for available work‐
arounds.
bmc-watchdog-verbose-logging ENABLE|DISABLE
Specify if logging will be verbose by default.
bmc-watchdog-no-logging ENABLE|DISABLE
Specify if logging will be disabled by default.
IPMI-CHASSIS OPTIONS
The following options are specific to ipmi-chassis(8). They will be
ignored by other tools.
ipmi-chassis-username USERNAME
Specify the default username to use for ipmi-chassis(8). If
specified, will override the general option username above.
ipmi-chassis-password PASSWORD
Specify the default password to use for ipmi-chassis(8). If
specified, will override the general option password above.
ipmi-chassis-k_g str
Specify the default BMC key (K_g) to use for ipmi-chassis(8).
If specified, will override the general option k_g above. Prefix
with '0x' to enter the key in hex.
ipmi-chassis-authentication-type AUTHENTICATION-TYPE
Specify the default authentication type to use for ipmi-chas‐
sis(8). If specified, will override the general option authen‐
tication-type above. The following authentication types are sup‐
ported: NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.
ipmi-chassis-cipher-suite-id CIPHER-SUITE-ID
Specify the default cipher suite id to use for ipmi-chassis(8).
If specified, will override the general option cipher-suite-id
above. The following cipher suite ids are supported: 0, 1, 2, 3,
6, 7, 8, 11, 12.
ipmi-chassis-privilege-level PRIVILEGE-LEVEL
Specify the default privilege type to use for ipmi-chassis(8).
If specified, will override the general option privilege-level
above. The following privilege levels are supported: USER, OPER‐
ATOR, ADMIN.
ipmi-chassis-workaround-flags WORKAROUNDS
Specify default workaround flags to use for ipmi-chassis(8). If
specified, will override the general options workaround-flags
above. Multiple workarounds can be specified separated by white‐
space. Please see ipmi-chassis(8) manpage for available work‐
arounds.
IPMI-CHASSIS-CONFIG OPTIONS
The following options are specific to ipmi-chassis-config(8). They
will be ignored by other tools.
ipmi-chassis-config-username USERNAME
Specify the default username to use for ipmi-chassis-config(8).
If specified, will override the general option username above.
ipmi-chassis-config-password PASSWORD
Specify the default password to use for ipmi-chassis-config(8).
If specified, will override the general option password above.
ipmi-chassis-config-k_g str
Specify the default BMC key (K_g) to use for ipmi-chassis-con‐
fig(8). If specified, will override the general option k_g
above. Prefix with '0x' to enter the key in hex.
ipmi-chassis-config-authentication-type AUTHENTICATION-TYPE
Specify the default authentication type to use for ipmi-chassis-
config(8). If specified, will override the general option
authentication-type above. The following authentication types
are supported: NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.
ipmi-chassis-config-cipher-suite-id CIPHER-SUITE-ID
Specify the default cipher suite id to use for ipmi-chassis-con‐
fig(8). If specified, will override the general option cipher-
suite-id above. The following cipher suite ids are supported: 0,
1, 2, 3, 6, 7, 8, 11, 12.
ipmi-chassis-config-privilege-level PRIVILEGE-LEVEL
Specify the default privilege type to use for ipmi-chassis-con‐
fig(8). If specified, will override the general option privi‐
lege-level above. The following privilege levels are supported:
USER, OPERATOR, ADMIN.
ipmi-chassis-config-workaround-flags WORKAROUNDS
Specify default workaround flags to use for ipmi-chassis-con‐
fig(8). If specified, will override the general options work‐
around-flags above. Multiple workarounds can be specified sepa‐
rated by whitespace. Please see ipmi-chassis-config(8) manpage
for available workarounds.
ipmi-chassis-config-verbose-count COUNT
Specify default verbose count to use for ipmi-chassis-config(8).
IPMI-DCMI OPTIONS
The following options are specific to ipmi-dcmi(8). They will be
ignored by other tools.
ipmi-dcmi-username USERNAME
Specify the default username to use for ipmi-dcmi(8). If speci‐
fied, will override the general option username above.
ipmi-dcmi-password PASSWORD
Specify the default password to use for ipmi-dcmi(8). If speci‐
fied, will override the general option password above.
ipmi-dcmi-k_g str
Specify the default BMC key (K_g) to use for ipmi-dcmi(8). If
specified, will override the general option k_g above. Prefix
with '0x' to enter the key in hex.
ipmi-dcmi-authentication-type AUTHENTICATION-TYPE
Specify the default authentication type to use for ipmi-dcmi(8).
If specified, will override the general option authentication-
type above. The following authentication types are supported:
NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.
ipmi-dcmi-cipher-suite-id CIPHER-SUITE-ID
Specify the default cipher suite id to use for ipmi-dcmi(8). If
specified, will override the general option cipher-suite-id
above. The following cipher suite ids are supported: 0, 1, 2, 3,
6, 7, 8, 11, 12.
ipmi-dcmi-privilege-level PRIVILEGE-LEVEL
Specify the default privilege type to use for ipmi-dcmi(8). If
specified, will override the general option privilege-level
above. The following privilege levels are supported: USER, OPER‐
ATOR, ADMIN.
ipmi-dcmi-workaround-flags WORKAROUNDS
Specify default workaround flags to use for ipmi-dcmi(8). If
specified, will override the general options workaround-flags
above. Multiple workarounds can be specified separated by white‐
space. Please see ipmi-dcmi(8) manpage for available work‐
arounds.
ipmi-dcmi-interpret-oem-data ENABLE|DISABLE
Specify if ipmi-dcmi should attempt to interpret OEM data by
default or not.
IPMI-FRU OPTIONS
The following options are specific to ipmi-fru(8). They will be
ignored by other tools.
ipmi-fru-username USERNAME
Specify the default username to use for ipmi-fru(8). If speci‐
fied, will override the general option username above.
ipmi-fru-password PASSWORD
Specify the default password to use for ipmi-fru(8). If speci‐
fied, will override the general option password above.
ipmi-fru-k_g str
Specify the default BMC key (K_g) to use for ipmi-fru(8). If
specified, will override the general option k_g above. Prefix
with '0x' to enter the key in hex.
ipmi-fru-authentication-type AUTHENTICATION-TYPE
Specify the default authentication type to use for ipmi-fru(8).
If specified, will override the general option authentication-
type above. The following authentication types are supported:
NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.
ipmi-fru-cipher-suite-id CIPHER-SUITE-ID
Specify the default cipher suite id to use for ipmi-fru(8). If
specified, will override the general option cipher-suite-id
above. The following cipher suite ids are supported: 0, 1, 2, 3,
6, 7, 8, 11, 12.
ipmi-fru-privilege-level PRIVILEGE-LEVEL
Specify the default privilege type to use for ipmi-fru(8). If
specified, will override the general option privilege-level
above. The following privilege levels are supported: USER, OPER‐
ATOR, ADMIN.
ipmi-fru-workaround-flags WORKAROUNDS
Specify default workaround flags to use for ipmi-fru(8). If
specified, will override the general options workaround-flags
above. Multiple workarounds can be specified separated by white‐
space. Please see ipmi-fru(8) manpage for available work‐
arounds.
ipmi-fru-verbose-count COUNT
Specify default verbose count to use for ipmi-fru(8).
ipmi-fru-bridge-fru ENABLE|DISABLE
Specify if FRU entries on other controllers should be read by
default or not.
ipmi-fru-interpret-oem-data ENABLE|DISABLE
Specify if ipmi-fru should attempt to interpret OEM data by
default or not.
IPMI-OEM OPTIONS
The following options are specific to ipmi-oem(8). They will be
ignored by other tools.
ipmi-oem-username USERNAME
Specify the default username to use for ipmi-oem(8). If speci‐
fied, will override the general option username above.
ipmi-oem-password PASSWORD
Specify the default password to use for ipmi-oem(8). If speci‐
fied, will override the general option password above.
ipmi-oem-k_g str
Specify the default BMC key (K_g) to use for ipmi-oem(8). If
specified, will override the general option k_g above. Prefix
with '0x' to enter the key in hex.
ipmi-oem-authentication-type AUTHENTICATION-TYPE
Specify the default authentication type to use for ipmi-oem(8).
If specified, will override the general option authentication-
type above. The following authentication types are supported:
NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.
ipmi-oem-cipher-suite-id CIPHER-SUITE-ID
Specify the default cipher suite id to use for ipmi-oem(8). If
specified, will override the general option cipher-suite-id
above. The following cipher suite ids are supported: 0, 1, 2, 3,
6, 7, 8, 11, 12.
ipmi-oem-privilege-level PRIVILEGE-LEVEL
Specify the default privilege type to use for ipmi-oem(8). If
specified, will override the general option privilege-level
above. The following privilege levels are supported: USER, OPER‐
ATOR, ADMIN.
ipmi-oem-workaround-flags WORKAROUNDS
Specify default workaround flags to use for ipmi-oem(8). If
specified, will override the general options workaround-flags
above. Multiple workarounds can be specified separated by white‐
space. Please see ipmi-oem(8) manpage for available work‐
arounds.
ipmi-oem-verbose-count COUNT
Specify default verbose count to use for ipmi-oem(8).
IPMI-PEF-CONFIG OPTIONS
The following options are specific to ipmi-pef-config(8). They will be
ignored by other tools.
ipmi-pef-config-username USERNAME
Specify the default username to use for ipmi-pef-config(8). If
specified, will override the general option username above.
ipmi-pef-config-password PASSWORD
Specify the default password to use for ipmi-pef-config(8). If
specified, will override the general option password above.
ipmi-pef-config-k_g str
Specify the default BMC key (K_g) to use for ipmi-pef-config(8).
If specified, will override the general option k_g above. Prefix
with '0x' to enter the key in hex.
ipmi-pef-config-authentication-type AUTHENTICATION-TYPE
Specify the default authentication type to use for ipmi-pef-con‐
fig(8). If specified, will override the general option authen‐
tication-type above. The following authentication types are sup‐
ported: NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.
ipmi-pef-config-cipher-suite-id CIPHER-SUITE-ID
Specify the default cipher suite id to use for ipmi-pef-con‐
fig(8). If specified, will override the general option cipher-
suite-id above. The following cipher suite ids are supported: 0,
1, 2, 3, 6, 7, 8, 11, 12.
ipmi-pef-config-privilege-level PRIVILEGE-LEVEL
Specify the default privilege type to use for ipmi-pef-con‐
fig(8). If specified, will override the general option privi‐
lege-level above. The following privilege levels are supported:
USER, OPERATOR, ADMIN.
ipmi-pef-config-workaround-flags WORKAROUNDS
Specify default workaround flags to use for ipmi-pef-config(8).
If specified, will override the general options workaround-flags
above. Multiple workarounds can be specified separated by white‐
space. Please see ipmi-pef-config(8) manpage for available
workarounds.
ipmi-pef-config-verbose-count COUNT
Specify default verbose count to use for ipmi-pef-config(8).
IPMI-PET OPTIONS
The following options are specific to ipmi-pet(8). They will be
ignored by other tools.
ipmi-pet-username USERNAME
Specify the default username to use for ipmi-pet(8). If speci‐
fied, will override the general option username above.
ipmi-pet-password PASSWORD
Specify the default password to use for ipmi-pet(8). If speci‐
fied, will override the general option password above.
ipmi-pet-k_g str
Specify the default BMC key (K_g) to use for ipmi-pet(8). If
specified, will override the general option k_g above. Prefix
with '0x' to enter the key in hex.
ipmi-pet-authentication-type AUTHENTICATION-TYPE
Specify the default authentication type to use for ipmi-pet(8).
If specified, will override the general option authentication-
type above. The following authentication types are supported:
NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.
ipmi-pet-cipher-suite-id CIPHER-SUITE-ID
Specify the default cipher suite id to use for ipmi-pet(8). If
specified, will override the general option cipher-suite-id
above. The following cipher suite ids are supported: 0, 1, 2, 3,
6, 7, 8, 11, 12.
ipmi-pet-privilege-level PRIVILEGE-LEVEL
Specify the default privilege type to use for ipmi-pet(8). If
specified, will override the general option privilege-level
above. The following privilege levels are supported: USER, OPER‐
ATOR, ADMIN.
ipmi-pet-workaround-flags WORKAROUNDS
Specify default workaround flags to use for ipmi-pet(8). If
specified, will override the general options workaround-flags
above. Multiple workarounds can be specified separated by white‐
space. Please see ipmi-pet(8) manpage for available work‐
arounds.
ipmi-pet-verbose-count COUNT
Specify default verbose count to use for ipmi-pet(8).
ipmi-pet-output-event-severity ENABLE|DISABLE
Specify if ipmi-pet should output the event severity state by
default.
ipmi-pet-output-event-state ENABLE|DISABLE
Specify if ipmi-pet should output the event state state by
default.
ipmi-pet-event-state-config-file FILE
Specify the default event state configuration file.
ipmi-pet-interpret-oem-data ENABLE|DISABLE
Specify if ipmi-pet should attempt to interpret OEM data by
default or not.
ipmi-pet-entity-sensor-names ENABLE|DISABLE
Specify if output of sensor names should include entity ids and
instances by default or not.
ipmi-pet-no-sensor-type-output ENABLE|DISABLE
Specify if output of the sensor type should be output by default
or not.
ipmi-pet-comma-separated-output ENABLE|DISABLE
Specify if output should be comma separated by default or not.
ipmi-pet-no-header-output ENABLE|DISABLE
Specify if column headers should be output by default or not.
ipmi-pet-non-abbreviated-units ENABLE|DISABLE
Specify if output should have units abbreviated by default or
not.
IPMI-RAW OPTIONS
The following options are specific to ipmi-raw(8). They will be
ignored by other tools.
ipmi-raw-username USERNAME
Specify the default username to use for ipmi-raw(8). If speci‐
fied, will override the general option username above.
ipmi-raw-password PASSWORD
Specify the default password to use for ipmi-raw(8). If speci‐
fied, will override the general option password above.
ipmi-raw-k_g str
Specify the default BMC key (K_g) to use for ipmi-raw(8). If
specified, will override the general option k_g above. Prefix
with '0x' to enter the key in hex.
ipmi-raw-authentication-type AUTHENTICATION-TYPE
Specify the default authentication type to use for ipmi-raw(8).
If specified, will override the general option authentication-
type above. The following authentication types are supported:
NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.
ipmi-raw-cipher-suite-id CIPHER-SUITE-ID
Specify the default cipher suite id to use for ipmi-raw(8). If
specified, will override the general option cipher-suite-id
above. The following cipher suite ids are supported: 0, 1, 2, 3,
6, 7, 8, 11, 12.
ipmi-raw-privilege-level PRIVILEGE-LEVEL
Specify the default privilege type to use for ipmi-raw(8). If
specified, will override the general option privilege-level
above. The following privilege levels are supported: USER, OPER‐
ATOR, ADMIN.
ipmi-raw-workaround-flags WORKAROUNDS
Specify default workaround flags to use for ipmi-raw(8). If
specified, will override the general options workaround-flags
above. Multiple workarounds can be specified separated by white‐
space. Please see ipmi-raw(8) manpage for available work‐
arounds.
IPMI-SEL OPTIONS
The following options are specific to ipmi-sel(8). They will be
ignored by other tools.
ipmi-sel-username USERNAME
Specify the default username to use for ipmi-sel(8). If speci‐
fied, will override the general option username above.
ipmi-sel-password PASSWORD
Specify the default password to use for ipmi-sel(8). If speci‐
fied, will override the general option password above.
ipmi-sel-k_g str
Specify the default BMC key (K_g) to use for ipmi-sel(8). If
specified, will override the general option k_g above. Prefix
with '0x' to enter the key in hex.
ipmi-sel-authentication-type AUTHENTICATION-TYPE
Specify the default authentication type to use for ipmi-sel(8).
If specified, will override the general option authentication-
type above. The following authentication types are supported:
NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.
ipmi-sel-cipher-suite-id CIPHER-SUITE-ID
Specify the default cipher suite id to use for ipmi-sel(8). If
specified, will override the general option cipher-suite-id
above. The following cipher suite ids are supported: 0, 1, 2, 3,
6, 7, 8, 11, 12.
ipmi-sel-privilege-level PRIVILEGE-LEVEL
Specify the default privilege type to use for ipmi-sel(8). If
specified, will override the general option privilege-level
above. The following privilege levels are supported: USER, OPER‐
ATOR, ADMIN.
ipmi-sel-workaround-flags WORKAROUNDS
Specify default workaround flags to use for ipmi-sel(8). If
specified, will override the general options workaround-flags
above. Multiple workarounds can be specified separated by white‐
space. Please see ipmi-sel(8) manpage for available work‐
arounds.
ipmi-sel-verbose-count COUNT
Specify default verbose count to use for ipmi-sel(8).
ipmi-sel-types TYPE-LIST
Specify default types to show SEL events for. Multiple types can
be specified separated by whitespace. Users may specify sensor
types by string or by number (decimal or hex). Please see ipmi-
sel(8) --list-types option to see possible string input types.
ipmi-sel-exclude-types ENSOR-TYPES-LIST Specify
default sensor types to not show SEL events for. Multiple sensor
types can be specified separated by whitespace. Users may spec‐
ify sensor types by string or by number. Please see ipmi-sel(8)
--list-types option to see possible string input types.
ipmi-sel-system-event-only ENABLE|DISABLE
Specify if output should only include system event records.
ipmi-sel-oem-event-only ENABLE|DISABLE
Specify if output should only include OEM event records.
ipmi-sel-output-manufacturer-id ENABLE|DISABLE
Specify if output of OEM event records should include manufac‐
turer ID by default or not.
ipmi-sel-output-event-state ENABLE|DISABLE
Specify if ipmi-sel should output the event state state by
default.
ipmi-sel-event-state-config-file FILE
Specify the default event state configuration file.
ipmi-sel-interpret-oem-data ENABLE|DISABLE
Specify if ipmi-sel should attempt to interpret OEM data by
default or not.
ipmi-sel-output-oem-event-strings ENABLE|DISABLE
Specify if ipmi-sel should output OEM event strings by default
or not.
ipmi-sel-entity-sensor-names ENABLE|DISABLE
Specify if output of sensor names should include entity ids and
instances by default or not.
ipmi-sel-no-sensor-type-output ENABLE|DISABLE
Specify if output of the sensor type should be output by default
or not.
ipmi-sel-comma-separated-output ENABLE|DISABLE
Specify if output should be comma separated by default or not.
ipmi-sel-no-header-output ENABLE|DISABLE
Specify if column headers should be output by default or not.
ipmi-sel-non-abbreviated-units ENABLE|DISABLE
Specify if output should have units abbreviated by default or
not.
ipmi-sel-legacy-output ENABLE|DISABLE
Specify if output should be in legacy format by default or not.
IPMI-SENSORS OPTIONS
The following options are specific to ipmi-sensors(8). They will be
ignored by other tools.
ipmi-sensors-username USERNAME
Specify the default username to use for ipmi-sensors(8). If
specified, will override the general option username above.
ipmi-sensors-password PASSWORD
Specify the default password to use for ipmi-sensors(8). If
specified, will override the general option password above.
ipmi-sensors-k_g str
Specify the default BMC key (K_g) to use for ipmi-sensors(8).
If specified, will override the general option k_g above. Prefix
with '0x' to enter the key in hex.
ipmi-sensors-authentication-type AUTHENTICATION-TYPE
Specify the default authentication type to use for ipmi-sen‐
sors(8). If specified, will override the general option authen‐
tication-type above. The following authentication types are sup‐
ported: NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.
ipmi-sensors-cipher-suite-id CIPHER-SUITE-ID
Specify the default cipher suite id to use for ipmi-sensors(8).
If specified, will override the general option cipher-suite-id
above. The following cipher suite ids are supported: 0, 1, 2, 3,
6, 7, 8, 11, 12.
ipmi-sensors-privilege-level PRIVILEGE-LEVEL
Specify the default privilege type to use for ipmi-sensors(8).
If specified, will override the general option privilege-level
above. The following privilege levels are supported: USER, OPER‐
ATOR, ADMIN.
ipmi-sensors-workaround-flags WORKAROUNDS
Specify default workaround flags to use for ipmi-sensors(8). If
specified, will override the general options workaround-flags
above. Multiple workarounds can be specified separated by white‐
space. Please see ipmi-sensors(8) manpage for available work‐
arounds.
ipmi-sensors-verbose-count COUNT
Specify default verbose count to use for ipmi-sensors(8).
ipmi-sensors-quiet-readings ENABLE|DISABLE
Specify if sensor reading values and thresholds should not be
output by default.
ipmi-sensors-record-ids ECORD-IDS-LIST
Specify default record ids to show sensor outputs for. Multiple
record ids can be specified separated by whitespace.
ipmi-sensors-exclude-record-ids ECORD-IDS-LIST
Specify default record ids to not show sensor outputs for. Mul‐
tiple record ids can be specified separated by whitespace.
ipmi-sensors-types TYPE-LIST
Specify default types to show sensor outputs for. Multiple types
can be specified separated by whitespace. Users may specify sen‐
sor types by string or by number (decimal or hex). Please see
ipmi-sensors(8) --list-types option to see possible string input
types.
ipmi-sensors-exclude-types ENSOR-TYPES-LIST Specify
default sensor types to not show sensor outputs for. Multiple
sensor types can be specified separated by whitespace. Users may
specify sensor types by string or by number. Please see ipmi-
sensors(8) --list-types option to see possible string input
types.
ipmi-sensors-bridge-sensors ENABLE|DISABLE
Specify if non-BMC sensors should be bridged by default or not.
ipmi-sensors-shared-sensors ENABLE|DISABLE
Specify if shared sensors should be output by default or not.
ipmi-sensors-interpret-oem-data ENABLE|DISABLE
Specify if ipmi-sensors should attempt to interpret OEM data by
default or not.
ipmi-sensors-ignore-not-available-sensors ENABLE|DISABLE
Specify if ipmi-sensors should ignore not-available (i.e. N/A)
sensors by default.
ipmi-sensors-ignore-unrecognized-events ENABLE|DISABLE
Specify if ipmi-sensors should ignore unrecognized events (i.e.
'Unrecognized Event') in sensors output by default.
ipmi-sensors-output-event-bitmask ENABLE|DISABLE
Specify if ipmi-sensors should output event bitmasks instead of
string representations by default.
ipmi-sensors-output-sensor-state ENABLE|DISABLE
Specify if ipmi-sensors should output the sensor state by
default.
ipmi-sensors-sensor-state-config-file FILE
Specify the default sensor state configuration file.
ipmi-sensors-entity-sensor-names ENABLE|DISABLE
Specify if output of sensor names should include entity ids and
instances by default or not.
ipmi-sensors-output-sensor-thresholds ENABLE|DISABLE
Specify if ipmi-sensors should output sensor thresholds by
default.
ipmi-sensors-no-sensor-type-output ENABLE|DISABLE
Specify if output of the sensor type should be output by default
or not.
ipmi-sensors-comma-separated-output ENABLE|DISABLE
Specify if output should be comma separated by default or not.
ipmi-sensors-no-header-output ENABLE|DISABLE
Specify if column headers should be output by default or not.
ipmi-sensors-non-abbreviated-units ENABLE|DISABLE
Specify if output should have units abbreviated by default or
not.
ipmi-sensors-legacy-output ENABLE|DISABLE
Specify if output should be in legacy format by default or not.
ipmi-sensors-ipmimonitoring-legacy-output ENABLE|DISABLE
Specify if output should be in ipmimonitoring legacy format by
default or not.
IPMI-SENSORS-CONFIG OPTIONS
The following options are specific to ipmi-sensors-config(8). They
will be ignored by other tools.
ipmi-sensors-config-username USERNAME
Specify the default username to use for ipmi-sensors-config(8).
If specified, will override the general option username above.
ipmi-sensors-config-password PASSWORD
Specify the default password to use for ipmi-sensors-config(8).
If specified, will override the general option password above.
ipmi-sensors-config-k_g str
Specify the default BMC key (K_g) to use for ipmi-sensors-con‐
fig(8). If specified, will override the general option k_g
above. Prefix with '0x' to enter the key in hex.
ipmi-sensors-config-authentication-type AUTHENTICATION-TYPE
Specify the default authentication type to use for ipmi-sensors-
config(8). If specified, will override the general option
authentication-type above. The following authentication types
are supported: NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.
ipmi-sensors-config-cipher-suite-id CIPHER-SUITE-ID
Specify the default cipher suite id to use for ipmi-sensors-con‐
fig(8). If specified, will override the general option cipher-
suite-id above. The following cipher suite ids are supported: 0,
1, 2, 3, 6, 7, 8, 11, 12.
ipmi-sensors-config-privilege-level PRIVILEGE-LEVEL
Specify the default privilege type to use for ipmi-sensors-con‐
fig(8). If specified, will override the general option privi‐
lege-level above. The following privilege levels are supported:
USER, OPERATOR, ADMIN.
ipmi-sensors-config-workaround-flags WORKAROUNDS
Specify default workaround flags to use for ipmi-sensors-con‐
fig(8). If specified, will override the general options work‐
around-flags above. Multiple workarounds can be specified sepa‐
rated by whitespace. Please see ipmi-sensors-config(8) manpage
for available workarounds.
ipmi-sensors-config-verbose-count COUNT
Specify default verbose count to use for ipmi-sensors-config(8).
IPMICONSOLE OPTIONS
The following options are specific to ipmiconsole(8). They will be
ignored by other tools.
ipmiconsole-username USERNAME
Specify the default username to use for ipmiconsole(8). If
specified, will override the general option username above.
ipmiconsole-password PASSWORD
Specify the default password to use for ipmiconsole(8). If
specified, will override the general option password above.
ipmiconsole-k_g str
Specify the default BMC key (K_g) to use for ipmiconsole(8). If
specified, will override the general option k_g above. Prefix
with '0x' to enter the key in hex.
ipmiconsole-authentication-type AUTHENTICATION-TYPE
Specify the default authentication type to use for ipmicon‐
sole(8). If specified, will override the general option authen‐
tication-type above. The following authentication types are sup‐
ported: NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.
ipmiconsole-cipher-suite-id CIPHER-SUITE-ID
Specify the default cipher suite id to use for ipmiconsole(8).
If specified, will override the general option cipher-suite-id
above. The following cipher suite ids are supported: 0, 1, 2, 3,
6, 7, 8, 11, 12.
ipmiconsole-privilege-level PRIVILEGE-LEVEL
Specify the default privilege type to use for ipmiconsole(8).
If specified, will override the general option privilege-level
above. The following privilege levels are supported: USER, OPER‐
ATOR, ADMIN.
ipmiconsole-workaround-flags WORKAROUNDS
Specify default workaround flags to use for ipmiconsole(8). If
specified, will override the general options workaround-flags
above. Multiple workarounds can be specified separated by white‐
space. Please see ipmiconsole(8) manpage for available work‐
arounds.
ipmiconsole-escape-char CHAR
Specify the default escape character.
ipmiconsole-dont-steal ENABLE|DISABLE
Specify if in use SOL sessions should not be stolen by default.
ipmiconsole-serial-keepalive ENABLE|DISABLE
Specify if serial keepalive should be enabled by default.
ipmiconsole-serial-keepalive-empty ENABLE|DISABLE
Specify if serial keepalive empty should be enabled by default.
ipmiconsole-lock-memory ENABLE|DISABLE
Specify if memory should be locked by default.
IPMIPOWER OPTIONS
The following options are specific to ipmipower(8). They will be
ignored by other tools.
ipmipower-username USERNAME
Specify the default username to use for ipmipower(8). If speci‐
fied, will override the general option username above.
ipmipower-password PASSWORD
Specify the default password to use for ipmipower(8). If speci‐
fied, will override the general option password above.
ipmipower-k_g str
Specify the default BMC key (K_g) to use for ipmipower(8). If
specified, will override the general option k_g above. Prefix
with '0x' to enter the key in hex.
ipmipower-authentication-type AUTHENTICATION-TYPE
Specify the default authentication type to use for ipmipower(8).
If specified, will override the general option authentication-
type above. The following authentication types are supported:
NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.
ipmipower-cipher-suite-id CIPHER-SUITE-ID
Specify the default cipher suite id to use for ipmipower(8). If
specified, will override the general option cipher-suite-id
above. The following cipher suite ids are supported: 0, 1, 2, 3,
6, 7, 8, 11, 12.
ipmipower-privilege-level PRIVILEGE-LEVEL
Specify the default privilege type to use for ipmipower(8). If
specified, will override the general option privilege-level
above. The following privilege levels are supported: USER, OPER‐
ATOR, ADMIN.
ipmipower-workaround-flags WORKAROUNDS
Specify default workaround flags to use for ipmipower(8). If
specified, will override the general options workaround-flags
above. Multiple workarounds can be specified separated by white‐
space. Please see ipmipower(8) manpage for available work‐
arounds.
ipmipower-on-if-off ENABLE|DISABLE
Specify if on-if-off functionality is enabled or disabled by
default.
ipmipower-wait-until-on ENABLE|DISABLE
Specify if wait-until-on functionality is enabled or disabled by
default.
ipmipower-wait-until-off ENABLE|DISABLE
Specify if wait-until-off functionality is enabled or disabled
by default.
ipmipower-oem-power-type OEM-POWER-TYPE
Specify OEM power type to be used.
ipmipower-retransmission-wait-timeout MILLISECONDS
Specify the default retransmission wait timeout length to use in
milliseconds.
ipmipower-retransmission-backoff-count COUNT
Specify the default retransmission backoff count to use for
retransmissions.
ipmipower-ping-interval MILLISECONDS
Specify the default ping interval length to use in milliseconds.
ipmipower-ping-timeout MILLISECONDS
Specify the default ping timeout length to use in milliseconds.
ipmipower-ping-packet-count COUNT
Specify the default ping packet count size to use.
ipmipower-ping-percent PERCENT
Specify the default ping percent value to use.
ipmipower-ping-consec-count COUNT
Specify the default ping consecutive count value to use.
FILES
/etc//freeipmi.conf
REPORTING BUGS
Report bugs to <freeipmi-users@gnu.org> or <freeipmi-devel@gnu.org>.
COPYRIGHT
Copyright © 2003-2012 FreeIPMI Core Team.
FreeIPMI is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the
Free Software Foundation; either version 3 of the License, or (at your
option) any later version.
SEE ALSO
freeipmi(7), bmc-config(8), bmc-device(8), bmc-info(8), bmc-watch‐
dog(8), ipmi-chassis(8), ipmi-fru(8), ipmi-oem(8), ipmi-pef-config(8),
ipmi-raw(8), ipmi-sel(8), ipmi-sensors(8), ipmi-sensors-config(8),
ipmiconsole(8), ipmipower(8)
http://www.gnu.org/software/freeipmi/
FreeIPMI 1.2.1 2013-11-21 FREEIPMI(5)
[top]
List of man pages available for Scientific
Copyright (c) for man pages and the logo by the respective OS vendor.
For those who want to learn more, the polarhome community provides shell access and support.
[legal]
[privacy]
[GNU]
[policy]
[cookies]
[netiquette]
[sponsors]
[FAQ]
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
|
|
Vote for polarhome
|
