foo2zjs-wrapper man page on LinuxMint

Man page or keyword search:  
man Server   4994 pages
apropos Keyword Search (all sections)
Output format
LinuxMint logo
[printable version]

foo2zjs-wrapper(1)					    foo2zjs-wrapper(1)

NAME
       foo2zjs-wrapper - Convert Postscript into a ZJS printer stream

SYNOPSIS
       foo2zjs-wrapper [options] [ps-file]

DESCRIPTION
       foo2zjs-wrapper	is  a  Foomatic	 compatible  printer  wrapper  for the
       foo2zjs printer driver.	This script  reads  a  Postscript  ps-file  or
       standard	 input and converts it to Zenographics ZjStream printer format
       for driving the Minolta/QMS 2300 DL network  color  laser  printer  and
       other Zenographics-based printers.

       This  script can be used in a standalone fashion, but is intended to be
       called from a printer spooler system which uses	the  Foomatic  printer
       database.

COMMAND LINE OPTIONS
   Normal Options
       These are the options used to select the parameters of a print job that
       are usually controlled on a per job basis.

       -c     Print in color (else monochrome).

       -C colormode
	      Color correction mode [0].

	       1   Photos (using m2300w CRDs)
	       2   Photos and text (using m2300w CRDs)
	       3   Graphics and text (using m2300w CRDs)
	      10   ICM color profile (using -G *.icm file)

       -d duplex
	      Duplex code to send to printer [1].
	      │	       │	       │
	      │1   off │ 2   long edge │ 3   short edge

       -m media
	      Media code to send to printer [1].

	      ──────────────────────────────────────────────────────────────
			      2300DL   2200DL	HP 1018	  HP P1102	 HP
	      Media	     HP 1005		HP 1020	  HP P1606   CP1025
				 -z0	  -z0	    -z1	       -z2	-z3
	      ──────────────────────────────────────────────────────────────
	      standard		   1	    1	      1		 1	  1
	      transparency	   2	    2	      2		 2	  2
	      envelope		 257	   na	    267	       267	267
	      letterhead	 259	   na	    513	       513	513
	      bond		  na	   na	    260	       260	260
	      thick		 261	    4	    261		na	 na
	      postcard		 262	   na	     na		na	 na
	      rough		  na	   na	    263	       263	263
	      heavy		  na	   na	    262	       262	262
	      labels		 263	    3	    263	       265	265
	      vellum		  na	   na	    273	       273	273
	      medium		  na	   na	     na	       282	282
	      extraheavy	  na	   na	     na	       283	283

	      color		  na	   na	    512	       512	512
	      light		  na	   na	    258	       258	258
	      preprinted	  na	   na	    514	       514	514
	      prepunched	  na	   na	    515	       515	515
	      recycled		  na	   na	    516	       516	516

       -p paper
	      Paper size code to send to printer [1].

	      ───────────────────────────────────────────────────────────
				 MC 2300DL   HP 1018   HP P1102	      HP
	      Paper		   HP 1005   HP 1020   HP P1606	  CP1025
				       -z0	 -z1	    -z2	     -z3
	      ───────────────────────────────────────────────────────────
	      letter			 1	   1	      1	       1
	      legal			 5	   5	      5	       5
	      executive			 7	   7	      7	       7
	      A4			 9	   9	      9	       9
	      A5			11	  11	     11	      11
	      B5jis			13	  13	     13	      13
	      env #10			20	  20	     20	      20
	      env DL			27	  27	     27	      27
	      env CL			28	  28	     28	      28
	      env B5			34	  34	     34	      34
	      env Monarch		37	  37	     37	      37
	      postcard (japan)		na	 260	     43	      43
	      B5iso			na	 259	     na	      na
	      A6			na	 262	     70	      70
	      double postcard		na	 261	     82	      82
	       rotated
	      16k 197x273		na	 257	    257	     257
	      fanfold german		na	 258	    258	     258
	       legal
	      16k 184x260		na	  na	    263	     263
	      16k 195x270		na	  na	    264	     264
	      photo 4x6			na	  na	     na	     268
	      photo 5x8			na	  na	     na	     269
	      photo 10x15		na	  na	     na	     270

       -n copies
	      Number of copies [1].

       -r xresxyres
	      Set device resolution in pixels/inch [1200x600].

       -s source
	      Source (Input Slot) code to send to printer [7].
	      │		 │
	      │1   upper │ 4   manual
	      │2   lower │ 7   auto

       -t     Draft mode.  Every other pixel is white.

       -T density
	      Print density (1-5).  The default is 3 (medium).

       -2 -3 -4 -5 -6 -8 -9 -10 -12 -14 -15 -16 -18
	      Print in N-up.  Requires the psutils package.

       -o orient
	      Orientation used for N-up.

	      Portrait	  -op	(normal)
	      Landscape	  -ol	(rotated 90 degrees anticlockwise)
	      Seascape	  -os	(rotated 90 degrees clockwise)

   Printer Tweaking Options
       These are the options used to customize the operation of foo2zjs for  a
       particular printer.

       -u xoffxyoff
	      Set  the	offset	of  the start of the printable region from the
	      upper left corner, in pixels  [varies  with  paper  size].   The
	      defaults should work on the 2200DL and 2300DL, and have not been
	      tested on any other printers.

       -l xoffxyoff
	      Set the offset of the end of the printable region from the lower
	      right  corner, in pixels [varies with paper size].  The defaults
	      should work on the 2200DL and 2300DL, and have not  been	tested
	      on any other printers.

       -L mask
	      Send  the	 logical  clipping  values from -u/-l in the ZjStream.
	      foo2zjs-wrapper always runs  Ghostscript	with  the  ideal  page
	      dimensions,  so  that the scale of the image is correct, regard‐
	      less whether or not the printer has unprintable  regions.	  This
	      option is used to move the position of the clipped image back to
	      where it belongs on the page.  The default is to send the amount
	      which  was  clipped  by  -u  and	-l, and should be good in most
	      cases.

	      0	  don't send any logical clipping amounts
	      1	  only send Y clipping amount
	      2	  only send X clipping amount
	      3	  send both X and Y clipping amounts

       -P     Do not send START_PLANE codes  on	 monochrome  output.   May  be
	      needed by some monochrome-only printers, such as the HP LaserJet
	      1000.

       -X padlen
	      Add extra zero padding to the end of BID segments.  The  default
	      is  16  bytes.   Padding	16 bytes of zeroes is needed for older
	      ZjStream printers, such as the Minolta 2200DL  and  HP  LaserJet
	      1000,  and  seems	 harmless  to  newer ones, such as the Minolta
	      2300DL.  So the default should be good for all cases.

       -z model
	      Model. Default is 0.

	      0	  KM 2300DL / HP 1000 / HP 1005
	      1	  HP 1018 / HP 1020 / HP 1022
	      2	  HP Pro P1102 / P1566 / P1606dn
	      3	  HP Pro CP1025

   Color Tweaking Options
       These are the options used to control  the  quality  of	color  output.
       Color correction is currently a WORK IN PROGRESS.

       -g gsopts
	      Additional   options   to	  pass	 to   Ghostscript,   such   as
	      -g“-dDITHERPPI=nnn”, etc.	 This  option  may  appear  more  than
	      once.

       -G profile.icm
	      Convert  profile.icm  to a Postscript color rendering dictionary
	      (CRD) using foo2zjs-icc2ps and  adjust  the  printer  colors  by
	      using  the  Postscript  setcolorrendering	 operator.   (WORK  IN
	      PROGRESS).

       -G gamma-file.ps
	      Prepend gamma-file.ps to the Postscript input to	perform	 color
	      correction  using the setcolortransfer Postscript operator.  For
	      example, the file might contain:
	      {0.333 exp} {0.333 exp} {0.333 exp} {0.333 exp} setcolortransfer

       -I intent
	      Select profile intent from the ICM file.	 0=Perceptual,	1=Col‐
	      orimetric, 2=Saturation, 3=Absolute.  Default is 0 (perceptual).

   Debugging Options
       These options are used for debugging foo2zjs and its wrapper.

       -S plane
	      Output just a single color plane from a color print and print it
	      on the black plane.  The default is to output all color planes.

	      1	  Cyan
	      2	  Magenta
	      3	  Yellow
	      4	  Black

       -D level
	      Set Debug level [0].

EXAMPLES
       Create a monochrome ZjStream from a Postscript  document,  examine  it,
       and then print it using a RAW print queue:

	      foo2zjs-wrapper testpage.ps > testpage.zm
	      zjsdecode < testpage.zm
	      lpr -P raw testpage.zm

       Create a color ZjStream stream from a Postscript document:

	      foo2zjs-wrapper -c testpage.ps > testpage.zc

FILES
       /usr/bin/foo2zjs-wrapper

SEE ALSO
       foo2zjs(1), zjsdecode(1)

AUTHOR
       Rick Richardson <rick.richardson@comcast.net>
       http://foo2zjs.rkkda.com/

[top]

List of man pages available for LinuxMint

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net