foo2zjs man page on Ubuntu

Man page or keyword search:  
man Server   6591 pages
apropos Keyword Search (all sections)
Output format
Ubuntu logo
[printable version]

foo2zjs(1)							    foo2zjs(1)

NAME
       foo2zjs	-  Convert  Ghostscript	 pbmraw	 or  bitcmyk format into a ZJS
       printer stream

SYNOPSIS
       foo2zjs [options] <pbmraw-file >zjs-file

       foo2zjs [options] <bitcmyk-file >zjs-file

       foo2zjs [options] <pksmraw-file >zjs-file

DESCRIPTION
       foo2zjs converts Ghostscript pbmraw, bitcmyk, or pksmraw output formats
       to monochrome or color ZJS streams, for driving the Minolta/QMS 2300 DL
       network color laser printer and other Zenographics-based printers.

COMMAND LINE OPTIONS
   Normal Options
       These are the options used to select the parameters of a print job that
       are usually controlled on a per job basis.

       -c     Force color mode if autodetect doesn't work.

       -d duplex
	      Duplex code to send to printer [1].
	      │	       │	       │
	      │1   off │ 2   long edge │ 3   short edge

       -g xpixxypix
	      Set page dimensions in pixels [10200x6600].

       -m media
	      Media code to send to printer [1].

	      ───────────────────────────────
	      Media	     2300DL   2200DL
	      ───────────────────────────────
	      standard		1	1
	      transparency	2	2
	      envelope	      257	na
	      letterhead      259	na
	      thick	      261	4
	      postcard	      262	na
	      labels	      263	3

       -p paper
	      Paper code to send to printer [1].

	      ┌─────────────────┬─────────────┐
	      │ 1   letter	│  9   A4     │
	      │ 5   legal	│ 11   A5     │
	      │ 7   executive	│ 13   B5     │
	      │20   env #10	│ 27   env DL │
	      │28   env C5	│ 34   env B5 │
	      │37   env Monarch │	      │
	      └─────────────────┴─────────────┘
       -n copies
	      Number of copies [1].

       -r xresxyres
	      Set device resolution in pixels/inch [1200x600].

       -s source
	      Source (InputSlot) code to send to printer [7].
	      │		 │
	      │1   upper │ 4   manual
	      │2   lower │ 7   auto

       -t     Draft mode.  Every other pixel is white.

       -J filename
	      Filename string to send to printer.

       -U username
	      Username string to send to printer.

   Printer Tweaking Options
       These  are the options used to customize the operation of foo2zjs for a
       particular printer.

       -u xoffxyoff
	      Set the offset of the start of the  printable  region  from  the
	      upper left corner, in pixels [0x0].

       -l xoffxyoff
	      Set the offset of the end of the printable region from the lower
	      right corner, in pixels [0x0].

       -L mask
	      Send logical clipping amounts implied by -u/-l in	 the  ZjStream
	      [3].

	      0	  don't send any logical clipping amounts
	      1	  only send Y clipping amount
	      2	  only send X clipping amount
	      3	  send both X and Y clipping amounts

       -P     Do  not  send  START_PLANE  codes	 on monochrome output.	May be
	      needed by some black and white only printers,  such  as  the  HP
	      LaserJet 1000.

       -A     AllIsBlack: convert C=1,M=1,Y=1 to just K=1.  Works with bitcmyk
	      input only.

       -B     BlackClears: K=1 forces C,M,Y to 0.  Works  with	bitcmyk	 input
	      only.

       -X padlen
	      Add  extra zero padding to the end of BID segments.  The default
	      is 16 bytes.  Padding 16 bytes of zeroes	is  needed  for	 older
	      ZjStream	printers,  such	 as the Minolta 2200DL and HP LaserJet
	      1000, and seems harmless to newer	 ones,	such  as  the  Minolta
	      2300DL.  So the default should be good for all cases.

       -z model
	      Model: 0=2300DL, 1=HP1020.  Default is 0.

   Debugging Options
       These options are used for debugging foo2zjs.

       -S plane
	      Output just a single color plane from a color print and print it
	      on the black plane.  The default is to output all color planes.

	      1	  Cyan
	      2	  Magenta
	      3	  Yellow
	      4	  Black

       -D level
	      Set Debug level [0].

EXAMPLES
       Create a black and white ZJS stream:

	      gs -q -dBATCH -dSAFER -dQUIET -dNOPAUSE
		  -sPAPERSIZE=letter -r1200x600 -sDEVICE=pbmraw
		  -sOutputFile=- - < testpage.ps
	      | foo2zjs -r1200x600 -g10200x6600 -p1 >testpage.zm

       Create a color ZJS stream:

	      gs -q -dBATCH -dSAFER -dQUIET -dNOPAUSE
		  -sPAPERSIZE=letter -g10200x6600 -r1200x600 -sDEVICE=bitcmyk
		  -sOutputFile=- - < testpage.ps
	      | foo2zjs -r1200x600 -g10200x6600 -p1 >testpage.zc

FILES
       /usr/bin/foo2zjs

SEE ALSO
       foo2zjs-wrapper(1), zjsdecode(1)

AUTHOR
       Rick Richardson <rick.richardson@comcast.net>
       http://foo2zjs.rkkda.com/

[top]

List of man pages available for Ubuntu

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net