foo2lava-wrapper man page on Raspbian

Man page or keyword search:  
man Server   8174 pages
apropos Keyword Search (all sections)
Output format
Raspbian logo
[printable version]

foo2lava-wrapper(1)					   foo2lava-wrapper(1)

NAME
       foo2lava-wrapper	 -  Convert  Postscript into a LAVAFLOW or OPL printer
       stream

SYNOPSIS
       foo2lava-wrapper [options] [ps-file]

DESCRIPTION
       foo2lava-wrapper is a  Foomatic	compatible  printer  wrapper  for  the
       foo2lava	 printer  driver.   This  script reads a Postscript ps-file or
       standard input and converts it to Zenographics LAVAFLOW printer	format
       for  driving  the  Konica Minolta magicolor 2530 DL network color laser
       printer, the Konica Minolta magicolor 2480/2490	MF  AIO	 printer,  and
       other Zenographics-based LAVAFLOW printers.

       This  script can be used in a standalone fashion, but is intended to be
       called from a printer spooler system which uses	the  Foomatic  printer
       database.

COMMAND LINE OPTIONS
   Normal Options
       These are the options used to select the parameters of a print job that
       are usually controlled on a per job basis.

       -c     Print in color (else monochrome).

       -C colormode
	      Color correction mode [0].

	       1   Photos (using m2300w CRDs)
	       2   Photos and text (using m2300w CRDs)
	       3   Graphics and text (using m2300w CRDs)
	      10   ICM color profile (using -G *.icm file)

       -d duplex
	      Duplex code to send to printer [1].
	      │	       │	       │
	      │1   off │ 2   long edge │ 3   short edge

       -m media
	      Media code to send to printer [0].

	      ──────────────────────────
	      Media	     2530DL
	      ──────────────────────────
	      plain		0
	      transparency	4
	      thick stock      20
	      envelope	       22
	      letterhead       23
	      postcard	       25
	      labels	       26
	      recycled	       27

       -p paper
	      Paper size code to send to printer [2].

	      ┌──────────────────┬─────────────────────┐
	      │	 1   executive	 │  25	 A5	       │
	      │	 2   letter	 │  26	 A4	       │
	      │	 3   legal	 │  45	 B5jis	       │
	      │ 80   env Monarch │  65	 B5iso	       │
	      │ 81   env #10	 │  90	 env DL	       │
	      │ 91   env C5	 │  92	 env B5	       │
	      │835   4x6" photo	 │ 837	 10x15cm photo │
	      └──────────────────┴─────────────────────┘
       -n copies
	      Number of copies [1].

       -r xresxyres
	      Set device resolution in pixels/inch [1200x600].

       -s source
	      Source (Input Slot) code to send to printer [255].
	      │		  │
	      │1   Tray 1 │ 255	  auto
	      │4   Tray 2 │

       -t     Draft mode.  Every other pixel is white.

       -2 -3 -4 -5 -6 -8 -9 -10 -12 -14 -15 -16 -18
	      Print in N-up.  Requires the psutils package.

       -o orient
	      Orientation used for N-up.

	      Portrait	  -op	(normal)
	      Landscape	  -ol	(rotated 90 degrees anticlockwise)
	      Seascape	  -os	(rotated 90 degrees clockwise)

   Printer Tweaking Options
       These are the options used to customize the operation of foo2lava for a
       particular printer.

       -u xoffxyoff
	      Set  the	offset	of  the start of the printable region from the
	      upper left corner, in pixels  [varies  with  paper  size].   The
	      defaults should work on the 2200DL and 2300DL, and have not been
	      tested on any other printers.

       -l xoffxyoff
	      Set the offset of the end of the printable region from the lower
	      right  corner, in pixels [varies with paper size].  The defaults
	      should work on the 2200DL and 2300DL, and have not  been	tested
	      on any other printers.

       -L mask
	      Send  the	 logical  clipping  values  from -u/-l in the LAVAFLOW
	      stream.  foo2lava-wrapper always runs Ghostscript with the ideal
	      page  dimensions,	 so  that  the	scale of the image is correct,
	      regardless whether or not the printer has	 unprintable  regions.
	      This  option  is	used to move the position of the clipped image
	      back to where it belongs on the page.  The default  is  to  send
	      the amount which was clipped by -u and -l, and should be good in
	      most cases.

	      0	  don't send any logical clipping amounts
	      1	  only send Y clipping amount
	      2	  only send X clipping amount
	      3	  send both X and Y clipping amounts

       -z model
	      Model: 0=2530DL (lavaflow) or 1=2480MF (opl).  Default is 0.

   Color Tweaking Options
       These are the options used to control  the  quality  of	color  output.
       Color correction is currently a WORK IN PROGRESS.

       -g gsopts
	      Additional   options   to	  pass	 to   Ghostscript,   such   as
	      -g“-dDITHERPPI=nnn”, etc.	 This  option  may  appear  more  than
	      once.

       -G profile.icm
	      Convert  profile.icm  to a Postscript color rendering dictionary
	      (CRD) using foo2zjs-icc2ps and  adjust  the  printer  colors  by
	      using  the  Postscript  setcolorrendering	 operator.   (WORK  IN
	      PROGRESS).

       -G gamma-file.ps
	      Prepend gamma-file.ps to the Postscript input to	perform	 color
	      correction  using the setcolortransfer Postscript operator.  For
	      example, the file might contain:
	      {0.333 exp} {0.333 exp} {0.333 exp} {0.333 exp} setcolortransfer

       -I intent
	      Select profile intent from the ICM file.	 0=Perceptual,	1=Col‐
	      orimetric, 2=Saturation, 3=Absolute.  Default is 0 (perceptual).

   Debugging Options
       These options are used for debugging foo2lava and its wrapper.

       -S plane
	      Output just a single color plane from a color print and print it
	      on the black plane.  The default is to output all color planes.

	      1	  Cyan
	      2	  Magenta
	      3	  Yellow
	      4	  Black

       -D level
	      Set Debug level [0].

EXAMPLES
       Create a monochrome LAVAFLOW stream from a Postscript document, examine
       it, and then print it using a RAW print queue:

	      foo2lava-wrapper testpage.ps > testpage.zm
	      lavadecode < testpage.zm
	      lpr -P raw testpage.zm

       Create a color LAVAFLOW stream from a Postscript document:

	      foo2lava-wrapper -c testpage.ps > testpage.zc

FILES
       /usr/bin/foo2lava-wrapper

SEE ALSO
       foo2lava(1), lavadecode(1) opldecode(1)

AUTHOR
       Rick Richardson <rick.richardson@comcast.net>
       http://foo2zjs.rkkda.com/

[top]

List of man pages available for Raspbian

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net