foo2hbpl2 man page on LinuxMint

Man page or keyword search:  
man Server   4994 pages
apropos Keyword Search (all sections)
Output format
LinuxMint logo
[printable version]

foo2hbpl2(1)							  foo2hbpl2(1)

NAME
       foo2hbpl2  -  Convert  Ghostscript  pbmraw or bitcmyk format into a ZJS
       printer stream

SYNOPSIS
       foo2hbpl2 [options] <pbmraw-file >hbpl2-file

       foo2hbpl2 [options] <bitcmyk-file >hbpl2-file

       foo2hbpl2 [options] <pksmraw-file >hbpl2-file

DESCRIPTION
       foo2hbpl2 converts Ghostscript pbmraw, bitcmyk, or pksmraw output  for‐
       mats  to	 monochrome  or	 color HBPL version 2 streams, for driving the
       Dell 1355, Dell C1765,  Epson  AcuLaser	M1400,	Fuji  Xerox  DocuPrint
       CM205,  Fuji Xerox DocuPrint P205, Xerox WorkCentre 3045 MFP, and Xerox
       WorkCentre 6015 MFP printers.

COMMAND LINE OPTIONS
   Normal Options
       These are the options used to select the parameters of a print job that
       are usually controlled on a per job basis.

       -c     Force color mode if autodetect doesn't work.

       -d duplex
	      Duplex code to send to printer [1].
	      │	       │	       │
	      │1   off │ 2   long edge │ 3   short edge

       -g xpixxypix
	      Set page dimensions in pixels [10200x6600].

       -m media
	      Media code to send to printer [1].

	      ─────────────────
	      Media	  HBPL
	      ─────────────────
	      plain	     1
	      bond	     2
	      lwcard	     3
	      lwgcard	     4
	      labels	     5
	      envelope	     6
	      recycled	     7
	      plain2	     8
	      bond2	     9
	      lwcard2	    10
	      lwgcard2	    11
	      recycled2	    12

       -p paper
	      Paper code to send to printer [1].

	      ────────────────────────────
	      Paper		     HBPL
	      ────────────────────────────

	      A4			1
	      B5jis			2
	      letter			4
	      executive			5
	      fanfold german legal	6
	      folio			6
	      legal			7
	      env#10			9
	      envMonarch	       10
	      envC5		       11
	      envDL		       12

       -n copies
	      Number of copies [1].

       -r xresxyres
	      Set device resolution in pixels/inch [1200x600].

       -s source
	      Source (InputSlot) code to send to printer [7].
	      │		 │
	      │1   upper │ 4   manual
	      │2   lower │ 7   auto

       -t     Draft mode.  Every other pixel is white.

       -J filename
	      Filename string to send to printer.

       -U username
	      Username string to send to printer.

   Printer Tweaking Options
       These  are the options used to customize the operation of foo2hbpl2 for
       a particular printer.

       -u xoffxyoff
	      Set the offset of the start of the  printable  region  from  the
	      upper left corner, in pixels [0x0].

       -l xoffxyoff
	      Set the offset of the end of the printable region from the lower
	      right corner, in pixels [0x0].

       -L mask
	      Send logical clipping amounts implied by -u/-l in	 the  ZjStream
	      [3].

	      0	  don't send any logical clipping amounts
	      1	  only send Y clipping amount
	      2	  only send X clipping amount
	      3	  send both X and Y clipping amounts

       -P     Do  not  send  START_PLANE  codes	 on monochrome output.	May be
	      needed by some black and white only printers,  such  as  the  HP
	      LaserJet 1000.

       -A     AllIsBlack: convert C=1,M=1,Y=1 to just K=1.  Works with bitcmyk
	      input only.

       -B     BlackClears: K=1 forces C,M,Y to 0.  Works  with	bitcmyk	 input
	      only.

       -X padlen
	      Add  extra zero padding to the end of BID segments.  The default
	      is 16 bytes.  Padding 16 bytes of zeroes	is  needed  for	 older
	      ZjStream	printers,  such	 as the Minolta 2200DL and HP LaserJet
	      1000, and seems harmless to newer	 ones,	such  as  the  Minolta
	      2300DL.  So the default should be good for all cases.

   Debugging Options
       These options are used for debugging foo2hbpl2.

       -S plane
	      Output just a single color plane from a color print and print it
	      on the black plane.  The default is to output all color planes.

	      1	  Cyan
	      2	  Magenta
	      3	  Yellow
	      4	  Black

       -D level
	      Set Debug level [0].

EXAMPLES
       Create a black and white ZJS stream:

	      gs -q -dBATCH -dSAFER -dQUIET -dNOPAUSE
		  -sPAPERSIZE=letter -r1200x600 -sDEVICE=pbmraw
		  -sOutputFile=- - < testpage.ps
	      | foo2hbpl2 -r1200x600 -g10200x6600 -p1 >testpage.zm

       Create a color ZJS stream:

	      gs -q -dBATCH -dSAFER -dQUIET -dNOPAUSE
		  -sPAPERSIZE=letter -g10200x6600 -r1200x600 -sDEVICE=bitcmyk
		  -sOutputFile=- - < testpage.ps
	      | foo2hbpl2 -r1200x600 -g10200x6600 -p1 >testpage.zc

FILES
       /usr/bin/foo2hbpl2

SEE ALSO
       foo2hbpl2-wrapper(1), hbpldecode(1)

AUTHOR
       Rick Richardson <rick.richardson@comcast.net>
       Peter Korf <peter@niendo.de>
       http://foo2hbpl.rkkda.com/

[top]

List of man pages available for LinuxMint

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net