fglTexSubImage3D(3G) OpenGL Reference fglTexSubImage3D(3G)NAMEfglTexSubImage3D - specify a three-dimensional texture subimage
FORTRAN SPECIFICATION
SUBROUTINE fglTexSubImage3D( INTEGER*4 target,
INTEGER*4 level,
INTEGER*4 xoffset,
INTEGER*4 yoffset,
INTEGER*4 zoffset,
INTEGER*4 width,
INTEGER*4 height,
INTEGER*4 depth,
INTEGER*4 format,
INTEGER*4 type,
CHARACTER*8 pixels )
PARAMETERS
target Specifies the target texture. Must be GL_TEXTURE_3D.
level Specifies the level-of-detail number. Level 0 is the base image
level. Level n is the nth mipmap reduction image.
xoffset Specifies a texel offset in the x direction within the texture
array.
yoffset Specifies a texel offset in the y direction within the texture
array.
zoffset Specifies a texel offset in the z direction within the texture
array.
width Specifies the width of the texture subimage.
height Specifies the height of the texture subimage.
depth Specifies the depth of the texture subimage.
format Specifies the format of the pixel data. The following symbolic
values are accepted: GL_COLOR_INDEX, GL_RED, GL_GREEN, GL_BLUE,
GL_ALPHA, GL_RGB, GL_BGR, GL_RGBA, GL_BGRA, GL_ABGR_EXT,
GL_LUMINANCE, and GL_LUMINANCE_ALPHA.
type Specifies the data type of the pixel data. The following
symbolic values are accepted: GL_UNSIGNED_BYTE, GL_BYTE,
GL_BITMAP, GL_UNSIGNED_SHORT, GL_SHORT, GL_UNSIGNED_INT, GL_INT,
GL_FLOAT, GL_UNSIGNED_BYTE_3_3_2, GL_UNSIGNED_BYTE_2_3_3_REV,
GL_UNSIGNED_SHORT_5_6_5, GL_UNSIGNED_SHORT_5_6_5_REV,
GL_UNSIGNED_SHORT_4_4_4_4, GL_UNSIGNED_SHORT_4_4_4_4_REV,
GL_UNSIGNED_SHORT_5_5_5_1, GL_UNSIGNED_SHORT_1_5_5_5_REV,
GL_UNSIGNED_INT_8_8_8_8, GL_UNSIGNED_INT_8_8_8_8_REV,
Page 1
fglTexSubImage3D(3G) OpenGL Reference fglTexSubImage3D(3G)
GL_UNSIGNED_INT_10_10_10_2, and GL_UNSIGNED_INT_2_10_10_10_REV.
pixels Specifies a pointer to the image data in memory.
DESCRIPTION
Texturing maps a portion of a specified texture image onto each graphical
primitive for which texturing is enabled. To enable and disable three-
dimensional texturing, call fglEnable and fglDisable with argument
GL_TEXTURE_3D.
fglTexSubImage3D redefines a contiguous subregion of an existing three-
dimensional texture image. The texels referenced by pixels replace the
portion of the existing texture array with x indices xoffset and
xoffset + width - 1, inclusive, y indices yoffset and
yoffset + height - 1, inclusive, and z indices zoffset and
zoffset + depth - 1, inclusive. This region may not include any texels
outside the range of the texture array as it was originally specified.
It is not an error to specify a subtexture with zero width, height, or
depth but such a specification has no effect.
Normally fglTexSubImage3D is synchronous: OpenGL executes a
fglTexSubImage3D command in the order it is issued in the OpenGL command
stream. Calling fglEnable with parameter GL_ASYNC_TEX_IMAGE_SGIX causes
subsequent fglTexSubImage3D commands to be asynchronous as defined by the
SGIX_async extension. An asynchronous fglTexSubImage3D command samples
the OpenGL state vector at the point in the OpenGL command stream where
the command is issued, but the results of the command (e.g. availability
of texels for use in rasterization) do not happen until some unspecified
time in the future. In particular, the order of the asynchronous command
relative to other OpenGL commands issued later in the command stream is
undefined. An implementation may choose to execute asynchronous commands
in parallel with the normal command stream or at some convenient time in
the future.
Calling fglDisable with parameter GL_ASYNC_TEX_IMAGE_SGIX restores the
default synchronous behavior for subsequent fglTexSubImage3D commands.
It does not affect any pending asynchronous fglTexImage commands, or wait
for their completion.
When an asynchronous fglTexSubImage3D command is issued, it is associated
with the current value of GL_ASYNC_MARKER_SGIX as defined by the
SGIX_async extension. A program can determine if an asynchronous
fglTexSubImage3D command has completed by using the fglFinishAsyncSGIX or
fglPollAsyncSGIX commands.
There is a maximum number of asynchronous fglTexImage commands that can
be outstanding at any one time, defined by the implementation. This
value can be queried with fglGetIntegerv with argument
GL_MAX_ASYNC_TEX_IMAGE_SGIX.
Page 2
fglTexSubImage3D(3G) OpenGL Reference fglTexSubImage3D(3G)NOTESfglTexSubImage3D is available only if the GL version is 1.2 or greater.
Texturing has no effect in color index mode.
fglPixelStore and fglPixelTransfer modes affect texture images in exactly
the way they affect fglDrawPixels.
Formats GL_BGR, and GL_BGRA and types GL_UNSIGNED_BYTE_3_3_2,
GL_UNSIGNED_BYTE_2_3_3_REV, GL_UNSIGNED_SHORT_5_6_5,
GL_UNSIGNED_SHORT_5_6_5_REV, GL_UNSIGNED_SHORT_4_4_4_4,
GL_UNSIGNED_SHORT_4_4_4_4_REV, GL_UNSIGNED_SHORT_5_5_5_1,
GL_UNSIGNED_SHORT_1_5_5_5_REV, GL_UNSIGNED_INT_8_8_8_8,
GL_UNSIGNED_INT_8_8_8_8_REV, GL_UNSIGNED_INT_10_10_10_2, and
GL_UNSIGNED_INT_2_10_10_10_REV are available only if the GL version is
1.2 or greater.
GL_ABGR_EXT is valid only if the EXT_abgr extension is supported.
When the GL_ARB_imaging extension is supported, the RGBA components
specified in pixels may be processed by the imaging pipeline. See
fglTexImage3D for specific details.
ERRORS
GL_INVALID_ENUM is generated if target is not GL_TEXTURE_3D.
GL_INVALID_OPERATION is generated if the texture array has not been
defined by a previous fglTexImage3D operation.
GL_INVALID_VALUE is generated if level is less than 0.
GL_INVALID_VALUE may be generated if level is greater than log max, where
2
max is the returned value of GL_MAX_TEXTURE_SIZE.
GL_INVALID_VALUE is generated if xoffset < -b,
(xoffset + width) > (w - b), yoffset < -b, or
(yoffset + height) > (h - b), or zoffset < -b, or
(zoffset + depth) > (d - b), where w is the GL_TEXTURE_WIDTH, h is the
GL_TEXTURE_HEIGHT, d is the GL_TEXTURE_DEPTH and b is the border width of
the texture image being modified. Note that w, h, and d include twice
the border width.
GL_INVALID_VALUE is generated if width, height, or depth is less than 0.
GL_INVALID_ENUM is generated if format is not an accepted format
constant.
GL_INVALID_ENUM is generated if type is not a type constant.
GL_INVALID_ENUM is generated if type is GL_BITMAP and format is not
GL_COLOR_INDEX.
Page 3
fglTexSubImage3D(3G) OpenGL Reference fglTexSubImage3D(3G)
GL_INVALID_OPERATION is generated if fglTexSubImage3D is executed between
the execution of fglBegin and the corresponding execution of fglEnd.
GL_INVALID_OPERATION is generated if type is one of
GL_UNSIGNED_BYTE_3_3_2, GL_UNSIGNED_BYTE_2_3_3_REV,
GL_UNSIGNED_SHORT_5_6_5, or GL_UNSIGNED_SHORT_5_6_5_REV and format is not
GL_RGB.
GL_INVALID_OPERATION is generated if type is one of
GL_UNSIGNED_SHORT_4_4_4_4, GL_UNSIGNED_SHORT_4_4_4_4_REV,
GL_UNSIGNED_SHORT_5_5_5_1, GL_UNSIGNED_SHORT_1_5_5_5_REV,
GL_UNSIGNED_INT_8_8_8_8, GL_UNSIGNED_INT_8_8_8_8_REV,
GL_UNSIGNED_INT_10_10_10_2, or GL_UNSIGNED_INT_2_10_10_10_REV and format
is not GL_RGBA, GL_BGRA or GL_ABGR_EXT.
GL_INVALID_OPERATION is generated if GL_ASYNC_TEX_IMAGE_SGIX is enabled
and the number of asynchronous fglTexImage commands that have been issued
but not queried (using fglFinishAsyncSGIX or fglPollAsyncSGIX) exceeds
GL_MAX_ASYNC_TEX_IMAGE_SGIX.
ASSOCIATED GETS
fglGetTexImage
fglIsEnabled with argument GL_TEXTURE_3D
MACHINE DEPENDENCIES
The SGIX_async and SGIX_async_pixel extensions are implemented only on
Octane2 VPro systems.
SEE ALSO
fglCopyTexImage1D, fglCopyTexImage2D, fglCopyTexSubImage1D,
fglCopyTexSubImage2D, fglCopyTexSubImage3D, fglDrawPixels, fglPixelStore,
fglPixelTransfer, fglTexEnv, fglTexGen, fglTexImage1D, fglTexImage2D,
fglTexImage3D, fglTexSubImage1D, fglTexSubImage2D, fglTexParameter,
fglAsyncMarkerSGIX, fglDeleteAsyncMarkersSGIX, fglFinishAsyncSGIX,
fglGenAsyncMarkersSGIX, fglIsAsyncMarkerSGIX, fglPollAsyncSGIX
Page 4
