FENCE_AGENT(8)FENCE_AGENT(8)NAMEfence_wti - Fence agent for WTI
DESCRIPTIONfence_wti is an I/O Fencing agent which can be used with the WTI Net‐
work Power Switch (NPS). It logs into an NPS via telnet or ssh and
boots a specified plug. Lengthy telnet connections to the NPS should be
avoided while a GFS cluster is running because the connection will
block any necessary fencing actions.
fence_wti accepts options on the command line as well as from stdin.
Fenced sends parameters through stdin when it execs the agent.
fence_wti can be run by itself with command line options. This is use‐
ful for testing and for turning outlets on or off from scripts.
Vendor URL: http://www.wti.com
PARAMETERS-o, --action=<action>
Fencing Action (Default Value: reboot)
-a, --ip=<ip>
IP Address or Hostname This parameter is always required.
-l, --username=<name>
Login Name
-p, --password=<password>
Login password or passphrase
-S, --password-script=<script>
Script to retrieve password
-c, --command-prompt=<prompt>
Force command prompt (Default Value: ['RSM>', 'MPC>', 'IPS>',
'TPS>', 'NBB>', 'NPS>', 'VMR>'])
-x, --ssh
SSH connection
-k, --identity-file=<filename>
Identity file for ssh
-n, --plug=<id>
Physical plug number or name of virtual machine This parameter
is always required.
-4, --inet4-only
Forces agent to use IPv4 addresses only
-6, --inet6-only
Forces agent to use IPv6 addresses only
-u, --ipport=<port>
TCP port to use for connection with device
-v, --verbose
Verbose mode
-D, --debug-file=<debugfile>
Write debug information to given file
-V, --version
Display version information and exit
-h, --help
Display help and exit
-C, --separator=<char>
Separator for CSV created by operation list (Default Value: ,)
--power-timeout
Test X seconds for status change after ON/OFF (Default Value:
20)
--shell-timeout
Wait X seconds for cmd prompt after issuing command (Default
Value: 3)
--login-timeout
Wait X seconds for cmd prompt after login (Default Value: 5)
--power-wait
Wait X seconds after issuing ON/OFF (Default Value: 0)
--delay
Wait X seconds before fencing is started (Default Value: 0)
--retry-on
Count of attempts to retry power on (Default Value: 1)
ACTIONS
on Power on machine.
off Power off machine.
reboot Reboot machine.
status This returns the status of the plug/virtual machine.
list List available plugs with aliases/virtual machines if there is
support for more then one device. Returns N/A otherwise.
monitor
Check if fencing device is running. List available plugs/virtual
machines or get status of machine (if it does not support more).
metadata
Display the XML metadata describing this resource.
STDIN PARAMETERS
action Fencing Action (Default Value: reboot)
ipaddr IP Address or Hostname This parameter is always required.
login Login Name
passwd Login password or passphrase
passwd_script
Script to retrieve password
cmd_prompt
Force command prompt (Default Value: ['RSM>', 'MPC>', 'IPS>',
'TPS>', 'NBB>', 'NPS>', 'VMR>'])
secure SSH connection
identity_file
Identity file for ssh
port Physical plug number or name of virtual machine This parameter
is always required.
inet4_only
Forces agent to use IPv4 addresses only
inet6_only
Forces agent to use IPv6 addresses only
ipport TCP port to use for connection with device
verbose
Verbose mode
debug Write debug information to given file
version
Display version information and exit
help Display help and exit
separator
Separator for CSV created by operation list (Default Value: ,)
power_timeout
Test X seconds for status change after ON/OFF (Default Value:
20)
shell_timeout
Wait X seconds for cmd prompt after issuing command (Default
Value: 3)
login_timeout
Wait X seconds for cmd prompt after login (Default Value: 5)
power_wait
Wait X seconds after issuing ON/OFF (Default Value: 0)
delay Wait X seconds before fencing is started (Default Value: 0)
retry_on
Count of attempts to retry power on (Default Value: 1)
fence_wti (Fence Agent) 2009-10-20 FENCE_AGENT(8)
