FENCE_AGENT(8)FENCE_AGENT(8)NAMEfence_rhevm - Fence agent for RHEV-M REST API
DESCRIPTIONfence_rhevm is an I/O Fencing agent which can be used with RHEV-M REST
API to fence virtual machines.
fence_rhevm accepts options on the command line as well as from stdin.
Fenced sends parameters through stdin when it execs the agent.
fence_rhevm can be run by itself with command line options. This is
useful for testing and for turning outlets on or off from scripts.
Vendor URL: http://www.redhat.com
PARAMETERS-a, --ip=[ip]
IP Address or Hostname This parameter is always required.
-l, --username=[name]
Login Name This parameter is always required.
-p, --password=[password]
Login password or passphrase
-z, --ssl
SSL connection
-t, --notls
Disable TLS negotiation
-n, --plug=[id]
Physical plug number, name of virtual machine or UUID This
parameter is always required.
-u, --ipport=[port] TCP/UDP port to use (default 80, 443 if --ssl
TCP/UDP port to use for connection with device (Default Value:
80)
-4, --inet4-only
Forces agent to use IPv4 addresses only
-6, --inet6-only
Forces agent to use IPv6 addresses only
-S, --password-script=[script]
Script to retrieve password
--ssl-secure
SSL connection with verifying fence device's certificate
--ssl-insecure
SSL connection without verifying fence device's certificate
-o, --action=[action]
Fencing Action (Default Value: reboot)
-v, --verbose
Verbose mode
-D, --debug-file=[debugfile]
Write debug information to given file
-V, --version
Display version information and exit
-h, --help
Display help and exit
-C, --separator=[char]
Separator for CSV created by operation list (Default Value: ,)
--power-timeout=[seconds]
Test X seconds for status change after ON/OFF (Default Value:
20)
--shell-timeout=[seconds]
Wait X seconds for cmd prompt after issuing command (Default
Value: 3)
--login-timeout=[seconds]
Wait X seconds for cmd prompt after login (Default Value: 5)
--power-wait=[seconds]
Wait X seconds after issuing ON/OFF (Default Value: 1)
--delay=[seconds]
Wait X seconds before fencing is started (Default Value: 0)
--retry-on=[attempts]
Count of attempts to retry power on (Default Value: 1)
ACTIONS
on Power on machine.
off Power off machine.
reboot Reboot machine.
status This returns the status of the plug/virtual machine.
list List available plugs with aliases/virtual machines if there is
support for more then one device. Returns N/A otherwise.
monitor
Check the health of fence device
metadata
Display the XML metadata describing this resource.
STDIN PARAMETERS
ipaddr IP Address or Hostname This parameter is always required.
login Login Name This parameter is always required.
passwd Login password or passphrase
ssl SSL connection
notls Disable TLS negotiation
port Physical plug number, name of virtual machine or UUID This
parameter is always required.
ipport TCP/UDP port to use for connection with device (Default Value:
80)
inet4_only
Forces agent to use IPv4 addresses only
inet6_only
Forces agent to use IPv6 addresses only
passwd_script
Script to retrieve password
ssl_secure
SSL connection with verifying fence device's certificate
ssl_insecure
SSL connection without verifying fence device's certificate
action Fencing Action (Default Value: reboot)
verbose
Verbose mode
debug Write debug information to given file
version
Display version information and exit
help Display help and exit
separator
Separator for CSV created by operation list (Default Value: ,)
power_timeout
Test X seconds for status change after ON/OFF (Default Value:
20)
shell_timeout
Wait X seconds for cmd prompt after issuing command (Default
Value: 3)
login_timeout
Wait X seconds for cmd prompt after login (Default Value: 5)
power_wait
Wait X seconds after issuing ON/OFF (Default Value: 1)
delay Wait X seconds before fencing is started (Default Value: 0)
retry_on
Count of attempts to retry power on (Default Value: 1)
fence_rhevm (Fence Agent) 2009-10-20 FENCE_AGENT(8)
