ethtool man page on OpenMandriva

Man page or keyword search:  
man Server   8135 pages
apropos Keyword Search (all sections)
Output format
OpenMandriva logo
[printable version]

ETHTOOL(8)							    ETHTOOL(8)

NAME
       ethtool - query or control network driver and hardware settings

SYNOPSIS
       ethtool devname

       ethtool -h|--help

       ethtool --version

       ethtool -a|--show-pause devname

       ethtool -A|--pause devname [autoneg on|off] [rx on|off] [tx on|off]

       ethtool -c|--show-coalesce devname

       ethtool -C|--coalesce devname [adaptive-rx on|off] [adaptive-tx on|off]
	      [rx-usecs N] [rx-frames N] [rx-usecs-irq N] [rx-frames-irq N]
	      [tx-usecs N] [tx-frames N] [tx-usecs-irq N] [tx-frames-irq N]
	      [stats-block-usecs N] [pkt-rate-low N] [rx-usecs-low N]
	      [rx-frames-low N] [tx-usecs-low N] [tx-frames-low N]
	      [pkt-rate-high N] [rx-usecs-high N] [rx-frames-high N]
	      [tx-usecs-high N] [tx-frames-high N] [sample-interval N]

       ethtool -g|--show-ring devname

       ethtool -G|--set-ring devname [rx N] [rx-mini N] [rx-jumbo N] [tx N]

       ethtool -i|--driver devname

       ethtool -d|--register-dump devname [raw on|off] [hex on|off] [file
	      name]

       ethtool -e|--eeprom-dump devname [raw on|off] [offset N] [length N]

       ethtool -E|--change-eeprom devname [magic N] [offset N] [length N]
	      [value N]

       ethtool -k|--show-features|--show-offload devname

       ethtool -K|--features|--offload devname feature on|off ...

       ethtool -p|--identify devname [N]

       ethtool -P|--show-permaddr devname

       ethtool -r|--negotiate devname

       ethtool -S|--statistics devname

       ethtool -t|--test devname [offline|online|external_lb]

       ethtool -s devname [speed N] [duplex half|full] [port tp|aui|bnc|mii]
	      [mdix auto|on|off] [autoneg on|off] [advertise N] [phyad N]
	      [xcvr internal|external] [wol p|u|m|b|a|g|s|d...]
	      [sopass xx:yy:zz:aa:bb:cc] [msglvl N | msglvl type on|off ...]

       ethtool -n|-u|--show-nfc|--show-ntuple devname
	      [ rx-flow-hash tcp4|udp4|ah4|esp4|sctp4|tcp6|udp6|ah6|esp6|sctp6 |
	      rule N ]

       ethtool -N|-U|--config-nfc|--config-ntuple devname
	      rx-flow-hash tcp4|udp4|ah4|esp4|sctp4|tcp6|udp6|ah6|esp6|sctp6
	      m|v|t|s|d|f|n|r... |
	      flow-type ether|ip4|tcp4|udp4|sctp4|ah4|esp4
	      [src xx:yy:zz:aa:bb:cc [m xx:yy:zz:aa:bb:cc]]
	      [dst xx:yy:zz:aa:bb:cc [m xx:yy:zz:aa:bb:cc]] [proto N [m N]]
	      [src-ip x.x.x.x [m x.x.x.x]] [dst-ip x.x.x.x [m x.x.x.x]]
	      [tos N [m N]] [l4proto N [m N]] [src-port N [m N]]
	      [dst-port N [m N]] [spi N [m N]] [l4data N [m N]]
	      [vlan-etype N [m N]] [vlan N [m N]] [user-def N [m N]] [dst-
	      mac xx:yy:zz:aa:bb:cc [m xx:yy:zz:aa:bb:cc]] [action N] [loc N]
	      |
	      delete N

       ethtool -w|--get-dump devname [data filename]

       ethtool -W|--set-dump devname N

       ethtool -T|--show-time-stamping devname

       ethtool -x|--show-rxfh-indir devname

       ethtool -X|--set-rxfh-indir devname [ equal N | weight W0 W1 ... ]

       ethtool -f|--flash devname file [N]

       ethtool -l|--show-channels devname

       ethtool -L|--set-channels devname [rx N] [tx N] [other N] [combined N]

       ethtool -m|--dump-module-eeprom|--module-info devname [raw on|off]
	      [hex on|off] [offset N] [length N]

       ethtool --show-priv-flags devname

       ethtool --set-priv-flags devname flag on|off ...

       ethtool --show-eee devname

       ethtool --set-eee devname [eee on|off] [tx-lpi on|off] [tx-timer N]
	      [advertise N]

DESCRIPTION
       ethtool is used to query and control network device driver and hardware
       settings, particularly for wired Ethernet devices.

       devname is the name of the network device on which ethtool should oper‐
       ate.

OPTIONS
       ethtool with a single argument specifying the device name  prints  cur‐
       rent settings of the specified device.

       -h --help
	      Shows a short help message.

       --version
	      Shows the ethtool version number.

       -a --show-pause
	      Queries the specified Ethernet device for pause parameter infor‐
	      mation.

       -A --pause
	      Changes the pause parameters of the specified Ethernet device.

       autoneg on|off
	      Specifies whether pause autonegotiation should be enabled.

       rx on|off
	      Specifies whether RX pause should be enabled.

       tx on|off
	      Specifies whether TX pause should be enabled.

       -c --show-coalesce
	      Queries the specified network device for coalescing information.

       -C --coalesce
	      Changes the coalescing settings of the specified network device.

       -g --show-ring
	      Queries the specified network device for	rx/tx  ring  parameter
	      information.

       -G --set-ring
	      Changes  the  rx/tx ring parameters of the specified network de‐
	      vice.

       rx N   Changes the number of ring entries for the Rx ring.

       rx-mini N
	      Changes the number of ring entries for the Rx Mini ring.

       rx-jumbo N
	      Changes the number of ring entries for the Rx Jumbo ring.

       tx N   Changes the number of ring entries for the Tx ring.

       -i --driver
	      Queries the specified network device for associated  driver  in‐
	      formation.

       -d --register-dump
	      Retrieves	 and  prints a register dump for the specified network
	      device.  The register format for some devices is known  and  de‐
	      coded others are printed in hex.	When raw is enabled, then eth‐
	      tool dumps the raw register data to stdout.  If file  is	speci‐
	      fied,  then  use	contents of previous raw register dump, rather
	      than reading from the device.

       -e --eeprom-dump
	      Retrieves and prints an EEPROM dump for  the  specified  network
	      device.	When raw is enabled, then it dumps the raw EEPROM data
	      to stdout. The length and offset parameters allow	 dumping  cer‐
	      tain portions of the EEPROM.  Default is to dump the entire EEP‐
	      ROM.

       -E --change-eeprom
	      If value is specified, changes EEPROM  byte  for	the  specified
	      network  device.	 offset	 and value specify which byte and it's
	      new value. If value is not specified, stdin is read and  written
	      to the EEPROM. The length and offset parameters allow writing to
	      certain portions of the EEPROM.  Because of the  persistent  na‐
	      ture  of writing to the EEPROM, a device-specific magic key must
	      be specified to prevent the accidental writing to the EEPROM.

       -k --show-features --show-offload
	      Queries the specified network device for the state  of  protocol
	      offload and other features.

       -K --features --offload
	      Changes  the offload parameters and other features of the speci‐
	      fied network device.  The following feature names	 are  built-in
	      and others may be defined by the kernel.

       rx on|off
	      Specifies whether RX checksumming should be enabled.

       tx on|off
	      Specifies whether TX checksumming should be enabled.

       sg on|off
	      Specifies whether scatter-gather should be enabled.

       tso on|off
	      Specifies whether TCP segmentation offload should be enabled.

       ufo on|off
	      Specifies whether UDP fragmentation offload should be enabled

       gso on|off
	      Specifies whether generic segmentation offload should be enabled

       gro on|off
	      Specifies whether generic receive offload should be enabled

       lro on|off
	      Specifies whether large receive offload should be enabled

       rxvlan on|off
	      Specifies whether RX VLAN acceleration should be enabled

       txvlan on|off
	      Specifies whether TX VLAN acceleration should be enabled

       ntuple on|off
	      Specifies	 whether  Rx  ntuple filters and actions should be en‐
	      abled

       rxhash on|off
	      Specifies whether receive hashing offload should be enabled

       -p --identify
	      Initiates adapter-specific action intended to enable an operator
	      to  easily  identify  the	 adapter by sight.  Typically this in‐
	      volves blinking one or more LEDs on the specific network port.

       N      Length of time to perform phys-id, in seconds.

       -P --show-permaddr
	      Queries the specified network device for permanent hardware  ad‐
	      dress.

       -r --negotiate
	      Restarts	auto-negotiation  on the specified Ethernet device, if
	      auto-negotiation is enabled.

       -S --statistics
	      Queries the specified network device for NIC- and driver-specif‐
	      ic statistics.

       -t --test
	      Executes	adapter selftest on the specified network device. Pos‐
	      sible test modes are:

       offline
	      Perform full set of tests, possibly interrupting	normal	opera‐
	      tion during the tests,

       online Perform limited set of tests, not interrupting normal operation,

       external_lb
	      Perform  full  set of tests, as for offline, and additionally an
	      external-loopback test.

       -s --change
	      Allows changing some or all settings of  the  specified  network
	      device.  All following options only apply if -s was specified.

       speed N
	      Set  speed in Mb/s.  ethtool with just the device name as an ar‐
	      gument will show you the supported device speeds.

       duplex half|full
	      Sets full or half duplex mode.

       port tp|aui|bnc|mii
	      Selects device port.

       mdix auto|on|off
	      Selects MDI-X mode for port. May be used to override  the	 auto‐
	      matic  detection	feature	 of most adapters. An argument of auto
	      means automatic detection of MDI status, on forces MDI-X (cross‐
	      over)  mode,  while  off means MDI (straight through) mode.  The
	      driver should guarantee that this command takes  effect  immedi‐
	      ately,  and  if necessary may reset the link to cause the change
	      to take effect.

       autoneg on|off
	      Specifies whether autonegotiation should be enabled. Autonegoti‐
	      ation  is	 enabled  by  default, but in some network devices may
	      have trouble with it, so you can disable it if really necessary.

       advertise N
	      Sets the speed and duplex advertised  by	autonegotiation.   The
	      argument	is  a  hexadecimal value using one or a combination of
	      the following values:

	      0x001	10 Half
	      0x002	10 Full
	      0x004	100 Half
	      0x008	100 Full
	      0x010	1000 Half	 (not supported by IEEE standards)
	      0x020	1000 Full
	      0x8000	2500 Full	 (not supported by IEEE standards)
	      0x1000	10000 Full
	      0x20000	20000MLD2 Full	 (not supported by IEEE standards)
	      0x40000	20000KR2 Full	 (not supported by IEEE standards)

       phyad N
	      PHY address.

       xcvr internal|external
	      Selects transceiver type. Currently only internal	 and  external
	      can be specified, in the future further types might be added.

       wol p|u|m|b|a|g|s|d...
	      Sets  Wake-on-LAN	 options.   Not all devices support this.  The
	      argument to this option is a  string  of	characters  specifying
	      which options to enable.

	      p	  Wake on PHY activity
	      u	  Wake on unicast messages
	      m	  Wake on multicast messages
	      b	  Wake on broadcast messages
	      a	  Wake on ARP
	      g	  Wake on MagicPacket™
	      s	  Enable SecureOn™ password for MagicPacket™
	      d	  Disable  (wake  on  nothing).	 This option
		  clears all previous options.

       sopass xx:yy:zz:aa:bb:cc
	      Sets the SecureOn™ password.  The argument to this  option  must
	      be 6 bytes in Ethernet MAC hex format (xx:yy:zz:aa:bb:cc).

       msglvl N
       msglvl type on|off ...
	      Sets the driver message type flags by name or number. type names
	      the type of message to enable or disable; N  specifies  the  new
	      flags numerically. The defined type names and numbers are:

	      drv	  0x0001  General driver status
	      probe	  0x0002  Hardware probing
	      link	  0x0004  Link state
	      timer	  0x0008  Periodic status check
	      ifdown	  0x0010  Interface being brought down
	      ifup	  0x0020  Interface being brought up
	      rx_err	  0x0040  Receive error
	      tx_err	  0x0080  Transmit error
	      tx_queued	  0x0100  Transmit queueing
	      intr	  0x0200  Interrupt handling
	      tx_done	  0x0400  Transmit completion
	      rx_status	  0x0800  Receive completion
	      pktdata	  0x1000  Packet contents
	      hw	  0x2000  Hardware status
	      wol	  0x4000  Wake-on-LAN status

	      The precise meanings of these type flags differ between drivers.

       -n -u --show-nfc --show-ntuple
	      Retrieves receive network flow classification options or rules.

       rx-flow-hash tcp4|udp4|ah4|esp4|sctp4|tcp6|udp6|ah6|esp6|sctp6
	      Retrieves the hash options for the specified flow type.

	      tcp4    TCP over IPv4
	      udp4    UDP over IPv4
	      ah4     IPSEC AH over IPv4
	      esp4    IPSEC ESP over IPv4
	      sctp4   SCTP over IPv4
	      tcp6    TCP over IPv6
	      udp6    UDP over IPv6
	      ah6     IPSEC AH over IPv6
	      esp6    IPSEC ESP over IPv6
	      sctp6   SCTP over IPv6

       rule N Retrieves the RX classification rule with the given ID.

       -N -U --config-nfc --config-ntuple
	      Configures receive network flow classification options or rules.

       rx-flow-hash tcp4|udp4|ah4|esp4|sctp4|tcp6|udp6|ah6|esp6|sctp6
       m|v|t|s|d|f|n|r...
	      Configures the hash options for the specified flow type.

	      m	  Hash on the Layer 2 destination address of the rx packet.
	      v	  Hash on the VLAN tag of the rx packet.
	      t	  Hash on the Layer 3 protocol field of the rx packet.
	      s	  Hash on the IP source address of the rx packet.
	      d	  Hash on the IP destination address of the rx packet.
	      f	  Hash on bytes 0 and 1 of the Layer 4 header of the rx packet.
	      n	  Hash on bytes 2 and 3 of the Layer 4 header of the rx packet.
	      r	  Discard all packets of this flow type. When  this  option  is
		  set, all other options are ignored.

       flow-type ether|ip4|tcp4|udp4|sctp4|ah4|esp4
	      Inserts  or updates a classification rule for the specified flow
	      type.

	      ether   Ethernet
	      ip4     Raw IPv4
	      tcp4    TCP over IPv4
	      udp4    UDP over IPv4
	      sctp4   SCTP over IPv4
	      ah4     IPSEC AH over IPv4
	      esp4    IPSEC ESP over IPv4

       For all fields that allow both a value and a mask to be specified,  the
       mask  may be specified immediately after the value using the m keyword,
       or separately using the field name keyword with	-mask  appended,  e.g.
       src-mask.

       src xx:yy:zz:aa:bb:cc [m xx:yy:zz:aa:bb:cc]
	      Includes	the  source MAC address, specified as 6 bytes in hexa‐
	      decimal separated by colons, along with an optional mask.	 Valid
	      only for flow-type ether.

       dst xx:yy:zz:aa:bb:cc [m xx:yy:zz:aa:bb:cc]
	      Includes	the  destination  MAC address, specified as 6 bytes in
	      hexadecimal separated by colons, along with  an  optional	 mask.
	      Valid only for flow-type ether.

       proto N [m N]
	      Includes the Ethernet protocol number (ethertype) and an option‐
	      al mask.	Valid only for flow-type ether.

       src-ip x.x.x.x [m x.x.x.x]
	      Specify the source IP address of the incoming  packet  to	 match
	      along  with  an  optional	 mask.	Valid for all IPv4 based flow-
	      types.

       dst-ip x.x.x.x [m x.x.x.x]
	      Specify the destination IP address of  the  incoming  packet  to
	      match  along  with  an  optional mask.  Valid for all IPv4 based
	      flow-types.

       tos N [m N]
	      Specify the value of the Type of Service field in	 the  incoming
	      packet  to  match	 along	with an optional mask.	Applies to all
	      IPv4 based flow-types.

       l4proto N [m N]
	      Includes the layer 4 protocol number and optional	 mask.	 Valid
	      only for flow-type ip4.

       src-port N [m N]
	      Specify  the  value  of  the  source  port  field (applicable to
	      TCP/UDP packets) in the incoming packet to match along  with  an
	      optional mask.  Valid for flow-types ip4, tcp4, udp4, and sctp4.

       dst-port N [m N]
	      Specify  the  value of the destination port field (applicable to
	      TCP/UDP packets)in the incoming packet to match  along  with  an
	      optional mask.  Valid for flow-types ip4, tcp4, udp4, and sctp4.

       spi N [m N]
	      Specify  the value of the security parameter index field (appli‐
	      cable to AH/ESP packets)in the incoming packet  to  match	 along
	      with an optional mask.  Valid for flow-types ip4, ah4, and esp4.

       l4data N [m N]
	      Specify  the value of the first 4 Bytes of Layer 4 in the incom‐
	      ing packet to match along with an optional mask.	Valid for  ip4
	      flow-type.

       vlan-etype N [m N]
	      Includes the VLAN tag Ethertype and an optional mask.

       vlan N [m N]
	      Includes the VLAN tag and an optional mask.

       user-def N [m N]
	      Includes 64-bits of user-specific data and an optional mask.

       dst-mac xx:yy:zz:aa:bb:cc [m xx:yy:zz:aa:bb:cc]
	      Includes	the  destination  MAC address, specified as 6 bytes in
	      hexadecimal separated by colons, along with  an  optional	 mask.
	      Valid for all IPv4 based flow-types.

       action N
	      Specifies the Rx queue to send packets to, or some other action.

	      -1	    Drop the matched flow
	      0 or higher   Rx queue to route the flow

       loc N  Specify  the location/ID to insert the rule. This will overwrite
	      any rule present in that location and will not go through any of
	      the rule ordering process.

       delete N
	      Deletes the RX classification rule with the given ID.

       -w --get-dump
	      Retrieves and prints firmware dump for the specified network de‐
	      vice.  By default, it prints out	the  dump  flag,  version  and
	      length  of  the dump data.  When data is indicated, then ethtool
	      fetches the dump data and directs it to a file.

       -W --set-dump
	      Sets the dump flag for the device.

       -T --show-time-stamping
	      Show the device's time stamping capabilities and associated  PTP
	      hardware clock.

       -x --show-rxfh-indir
	      Retrieves the receive flow hash indirection table.

       -X --set-rxfh-indir
	      Configures the receive flow hash indirection table.

       equal N
	      Sets  the	 receive  flow	hash indirection table to spread flows
	      evenly between the first N receive queues.

       weight W0 W1 ...
	      Sets the receive flow hash indirection table to spread flows be‐
	      tween receive queues according to the given weights.  The sum of
	      the weights must be non-zero and must not exceed the size of the
	      indirection table.

       -f --flash
	      Write  a firmware image to flash or other non-volatile memory on
	      the device.

       file   Specifies the filename of the firmware image.  The firmware must
	      first  be	 installed  in one of the directories where the kernel
	      firmware	loader	or  firmware  agent   will   look,   such   as
	      /lib/firmware.

       N      If  the  device  stores multiple firmware images in separate re‐
	      gions of non-volatile memory, this  parameter  may  be  used  to
	      specify  which  region  is to be written.	 The default is 0, re‐
	      questing that all regions are written.   All  other  values  are
	      driver-dependent.

       -l --show-channels
	      Queries the specified network device for the numbers of channels
	      it has.  A channel is an IRQ and the  set	 of  queues  that  can
	      trigger that IRQ.

       -L --set-channels
	      Changes the numbers of channels of the specified network device.

       rx N   Changes the number of channels with only receive queues.

       tx N   Changes the number of channels with only transmit queues.

       other N
	      Changes the number of channels used only for other purposes e.g.
	      link interrupts or SR-IOV co-ordination.

       combined N
	      Changes the number of multi-purpose channels.

       -m --dump-module-eeprom --module-info
	      Retrieves and if possible decodes the EEPROM  from  plugin  mod‐
	      ules,  e.g SFP+, QSFP.  If the driver and module support it, the
	      optical diagnostic information is also read and decoded.

       --show-priv-flags
	      Queries the specified network device for its private flags.  The
	      names and meanings of private flags (if any) are defined by each
	      network device driver.

       --set-priv-flags
	      Sets the device's private flags as specified.

       flag on|off Sets the state of the named private flag.

       --show-eee
	      Queries the specified network device for its support of  Energy-
	      Efficient	 Ethernet  (according  to  the IEEE 802.3az specifica‐
	      tions)

       --set-eee
	      Sets the device EEE behaviour.

       eee on|off
	      Enables/disables the device support of EEE.

       tx-lpi on|off
	      Determines whether the device should assert its Tx LPI.

       advertise N
	      Sets the speeds for which the device should advertise EEE	 capa‐
	      biliities.  Values are as for --change advertise

       tx-timer N
	      Sets the amount of time the device should stay in idle mode pri‐
	      or to asserting its Tx LPI (in microseconds). This  has  meaning
	      only when Tx LPI is enabled.

BUGS
       Not supported (in part or whole) on all network drivers.

AUTHOR
       ethtool was written by David Miller.

       Modifications by Jeff Garzik, Tim Hockin, Jakub Jelinek, Andre Majorel,
       Eli Kupermann, Scott Feldman,  Andi  Kleen,  Alexander  Duyck,  Sucheta
       Chakraborty.

AVAILABILITY
       ethtool		       is		 available		  from
       ⟨http://www.kernel.org/pub/software/network/ethtool/⟩

Ethtool version 3.10		 December 2012			    ETHTOOL(8)
[top]

List of man pages available for OpenMandriva

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net