DTFTRI(1) LAPACK routine (version 3.2) DTFTRI(1)NAME
DTFTRI - computes the inverse of a triangular matrix A stored in RFP
format
SYNOPSIS
SUBROUTINE DTFTRI( TRANSR, UPLO, DIAG, N, A, INFO )
CHARACTER TRANSR, UPLO, DIAG
INTEGER INFO, N
DOUBLE PRECISION A( 0: * )
PURPOSE
DTFTRI computes the inverse of a triangular matrix A stored in RFP for‐
mat. This is a Level 3 BLAS version of the algorithm.
ARGUMENTS
TRANSR (input) CHARACTER
= 'N': The Normal TRANSR of RFP A is stored;
= 'T': The Transpose TRANSR of RFP A is stored.
UPLO (input) CHARACTER
= 'U': A is upper triangular;
= 'L': A is lower triangular.
DIAG (input) CHARACTER
= 'N': A is non-unit triangular;
= 'U': A is unit triangular.
N (input) INTEGER
The order of the matrix A. N >= 0.
A (input/output) DOUBLE PRECISION array, dimension (0:nt-1);
nt=N*(N+1)/2. On entry, the triangular factor of a Hermitian
Positive Definite matrix A in RFP format. RFP format is
described by TRANSR, UPLO, and N as follows: If TRANSR = 'N'
then RFP A is (0:N,0:k-1) when N is even; k=N/2. RFP A is
(0:N-1,0:k) when N is odd; k=N/2. IF TRANSR = 'T' then RFP is
the transpose of RFP A as defined when TRANSR = 'N'. The con‐
tents of RFP A are defined by UPLO as follows: If UPLO = 'U'
the RFP A contains the nt elements of upper packed A; If UPLO =
'L' the RFP A contains the nt elements of lower packed A. The
LDA of RFP A is (N+1)/2 when TRANSR = 'T'. When TRANSR is 'N'
the LDA is N+1 when N is even and N is odd. See the Note below
for more details. On exit, the (triangular) inverse of the
original matrix, in the same storage format.
INFO (output) INTEGER
= 0: successful exit
< 0: if INFO = -i, the i-th argument had an illegal value
> 0: if INFO = i, A(i,i) is exactly zero. The triangular
matrix is singular and its inverse can not be computed.
FURTHER DETAILS
We first consider Rectangular Full Packed (RFP) Format when N is even.
We give an example where N = 6.
AP is Upper AP is Lower
00 01 02 03 04 05 00
11 12 13 14 15 10 11
22 23 24 25 20 21 22
33 34 35 30 31 32 33
44 45 40 41 42 43 44
55 50 51 52 53 54 55
Let TRANSR = 'N'. RFP holds AP as follows:
For UPLO = 'U' the upper trapezoid A(0:5,0:2) consists of the last
three columns of AP upper. The lower triangle A(4:6,0:2) consists of
the transpose of the first three columns of AP upper.
For UPLO = 'L' the lower trapezoid A(1:6,0:2) consists of the first
three columns of AP lower. The upper triangle A(0:2,0:2) consists of
the transpose of the last three columns of AP lower.
This covers the case N even and TRANSR = 'N'.
RFP A RFP A
03 04 05 33 43 53
13 14 15 00 44 54
23 24 25 10 11 55
33 34 35 20 21 22
00 44 45 30 31 32
01 11 55 40 41 42
02 12 22 50 51 52
Now let TRANSR = 'T'. RFP A in both UPLO cases is just the transpose of
RFP A above. One therefore gets:
RFP A RFP A
03 13 23 33 00 01 02 33 00 10 20 30 40 50
04 14 24 34 44 11 12 43 44 11 21 31 41 51
05 15 25 35 45 55 22 53 54 55 22 32 42 52
We first consider Rectangular Full Packed (RFP) Format when N is odd.
We give an example where N = 5.
AP is Upper AP is Lower
00 01 02 03 04 00
11 12 13 14 10 11
22 23 24 20 21 22
33 34 30 31 32 33
44 40 41 42 43 44
Let TRANSR = 'N'. RFP holds AP as follows:
For UPLO = 'U' the upper trapezoid A(0:4,0:2) consists of the last
three columns of AP upper. The lower triangle A(3:4,0:1) consists of
the transpose of the first two columns of AP upper.
For UPLO = 'L' the lower trapezoid A(0:4,0:2) consists of the first
three columns of AP lower. The upper triangle A(0:1,1:2) consists of
the transpose of the last two columns of AP lower.
This covers the case N odd and TRANSR = 'N'.
RFP A RFP A
02 03 04 00 33 43
12 13 14 10 11 44
22 23 24 20 21 22
00 33 34 30 31 32
01 11 44 40 41 42
Now let TRANSR = 'T'. RFP A in both UPLO cases is just the transpose of
RFP A above. One therefore gets:
RFP A RFP A
02 12 22 00 01 00 10 20 30 40 50
03 13 23 33 11 33 11 21 31 41 51
04 14 24 34 44 43 44 22 32 42 52
LAPACK routine (version 3.2) November 2008 DTFTRI(1)
