dsp56k man page on Knoppix

Man page or keyword search:  
man Server   3132 pages
apropos Keyword Search (all sections)
Output format
Knoppix logo
[printable version]

DSP56K(4)		   Linux Programmer's Manual		     DSP56K(4)

NAME
       dsp56k - DSP56001 interface device

SYNOPSIS
       #include <asm/dsp56k.h>

       ssize_t read(int fd, void *data, size_t length);
       ssize_t write(int fd, void *data, size_t length);

       int ioctl(int fd, DSP56K_UPLOAD, struct dsp56k_upload *program);
       int ioctl(int fd, DSP56K_SET_TX_WSIZE, int wsize);
       int ioctl(int fd, DSP56K_SET_RX_WSIZE, int wsize);
       int ioctl(int fd, DSP56K_HOST_FLAGS, struct dsp56k_host_flags *flags);
       int ioctl(int fd, DSP56K_HOST_CMD, int cmd);

CONFIGURATION
       The  dsp56k device is a character device with major number 55 and minor
       number 0.

DESCRIPTION
       The Motorola DSP56001 is a fully	 programmable  24-bit  digital	signal
       processor  found	 in  Atari Falcon030-compatible computers.  The dsp56k
       special file is used to control the DSP56001, and to send  and  receive
       data using the bidirectional handshaked host port.

       To  send	 a  data  stream  to the signal processor, use write(2) to the
       device, and read(2) to receive processed data.  The data can be sent or
       received	 in 8, 16, 24, or 32-bit quantities on the host side, but will
       always be seen as 24-bit quantities in the DSP56001.

       The following ioctl(2) calls are used to control the dsp56k device:

       DSP56K_UPLOAD
	      resets the DSP56001 and uploads a program.  The  third  ioctl(2)
	      argument	must  be a pointer to a struct dsp56k_binary with mem‐
	      bers bin pointing to a DSP56001 binary program, and len  set  to
	      the length of the program, counted in 24-bit words.

       DSP56K_SET_TX_WSIZE
	      sets  the transmit word size.  Allowed values are in the range 1
	      to 4, and is the number of bytes that will be sent at a time  to
	      the  DSP56001.  These data quantities will either be padded with
	      zero bytes, or truncated to fit the native 24-bit data format of
	      the DSP56001.

       DSP56K_SET_RX_WSIZE
	      sets  the	 receive word size.  Allowed values are in the range 1
	      to 4, and is the number of bytes that will be received at a time
	      from the DSP56001.  These data quantities will either truncated,
	      or padded with a null byte ('\0') to fit the native 24-bit  data
	      format of the DSP56001.

       DSP56K_HOST_FLAGS
	      read and write the host flags.  The host flags are four general-
	      purpose bits that can be read by both the hosting	 computer  and
	      the DSP56001.  Bits 0 and 1 can be written by the host, and bits
	      2 and 3 can be written by the DSP56001.

	      To access the host flags, the third ioctl(2) argument must be  a
	      pointer  to a struct dsp56k_host_flags.  If bit 0 or 1 is set in
	      the dir member, the corresponding bit in out will be written  to
	      the host flags.  The state of all host flags will be returned in
	      the lower four bits of the status member.

       DSP56K_HOST_CMD
	      sends a host command.  Allowed values are in the range 0 to  31,
	      and  is a user-defined command handled by the program running in
	      the DSP56001.

FILES
       /dev/dsp56k

SEE ALSO
       linux/include/asm-m68k/dsp56k.h,		  linux/drivers/char/dsp56k.c,
       ⟨http://dsp56k.nocrew.org/⟩, DSP56000/DSP56001 Digital Signal Processor
       User's Manual

COLOPHON
       This page is part of release 3.44 of the Linux  man-pages  project.   A
       description  of	the project, and information about reporting bugs, can
       be found at http://www.kernel.org/doc/man-pages/.

Linux				  2012-08-05			     DSP56K(4)
[top]

List of man pages available for Knoppix

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net