dirsrv_selinux(8) SELinux Policy dirsrv dirsrv_selinux(8)NAMEdirsrv_selinux - Security Enhanced Linux Policy for the dirsrv pro‐
cesses
DESCRIPTION
Security-Enhanced Linux secures the dirsrv processes via flexible
mandatory access control.
The dirsrv processes execute with the dirsrv_t SELinux type. You can
check if you have these processes running by executing the ps command
with the -Z qualifier.
For example:
ps -eZ | grep dirsrv_t
ENTRYPOINTS
The dirsrv_t SELinux type can be entered via the dirsrv_exec_t file
type.
The default entrypoint paths for the dirsrv_t domain are the following:
/usr/sbin/ns-slapd
PROCESS TYPES
SELinux defines process types (domains) for each process running on the
system
You can see the context of a process using the -Z option to ps
Policy governs the access confined processes have to files. SELinux
dirsrv policy is very flexible allowing users to setup their dirsrv
processes in as secure a method as possible.
The following process types are defined for dirsrv:
dirsrvadmin_unconfined_script_t, dirsrv_snmp_t, dirsrvadmin_t, dirsrv_t
Note: semanage permissive -a dirsrv_t can be used to make the process
type dirsrv_t permissive. SELinux does not deny access to permissive
process types, but the AVC (SELinux denials) messages are still gener‐
ated.
BOOLEANS
SELinux policy is customizable based on least access required. dirsrv
policy is extremely flexible and has several booleans that allow you to
manipulate the policy and run dirsrv with the tightest access possible.
If you want to allow users to resolve user passwd entries directly from
ldap rather then using a sssd server, you must turn on the authlo‐
gin_nsswitch_use_ldap boolean. Disabled by default.
setsebool -P authlogin_nsswitch_use_ldap 1
If you want to allow all daemons to write corefiles to /, you must turn
on the daemons_dump_core boolean. Disabled by default.
setsebool -P daemons_dump_core 1
If you want to enable cluster mode for daemons, you must turn on the
daemons_enable_cluster_mode boolean. Enabled by default.
setsebool -P daemons_enable_cluster_mode 1
If you want to allow all daemons to use tcp wrappers, you must turn on
the daemons_use_tcp_wrapper boolean. Disabled by default.
setsebool -P daemons_use_tcp_wrapper 1
If you want to allow all daemons the ability to read/write terminals,
you must turn on the daemons_use_tty boolean. Disabled by default.
setsebool -P daemons_use_tty 1
If you want to deny any process from ptracing or debugging any other
processes, you must turn on the deny_ptrace boolean. Enabled by
default.
setsebool -P deny_ptrace 1
If you want to allow all domains to use other domains file descriptors,
you must turn on the domain_fd_use boolean. Enabled by default.
setsebool -P domain_fd_use 1
If you want to allow all domains to have the kernel load modules, you
must turn on the domain_kernel_load_modules boolean. Disabled by
default.
setsebool -P domain_kernel_load_modules 1
If you want to allow all domains to execute in fips_mode, you must turn
on the fips_mode boolean. Enabled by default.
setsebool -P fips_mode 1
If you want to enable reading of urandom for all domains, you must turn
on the global_ssp boolean. Disabled by default.
setsebool -P global_ssp 1
If you want to allow confined applications to run with kerberos, you
must turn on the kerberos_enabled boolean. Enabled by default.
setsebool -P kerberos_enabled 1
If you want to allow system to run with NIS, you must turn on the
nis_enabled boolean. Disabled by default.
setsebool -P nis_enabled 1
If you want to allow confined applications to use nscd shared memory,
you must turn on the nscd_use_shm boolean. Disabled by default.
setsebool -P nscd_use_shm 1
NSSWITCH DOMAIN
If you want to allow users to resolve user passwd entries directly from
ldap rather then using a sssd server for the dirsrv_t, you must turn on
the authlogin_nsswitch_use_ldap boolean.
setsebool -P authlogin_nsswitch_use_ldap 1
If you want to allow confined applications to run with kerberos for the
dirsrv_t, you must turn on the kerberos_enabled boolean.
setsebool -P kerberos_enabled 1
MANAGED FILES
The SELinux process type dirsrv_t can manage files labeled with the
following file types. The paths listed are the default paths for these
file types. Note the processes UID still need to have DAC permissions.
cluster_conf_t
/etc/cluster(/.*)?
cluster_var_lib_t
/var/lib/pcsd(/.*)?
/var/lib/cluster(/.*)?
/var/lib/openais(/.*)?
/var/lib/pengine(/.*)?
/var/lib/corosync(/.*)?
/usr/lib/heartbeat(/.*)?
/var/lib/heartbeat(/.*)?
/var/lib/pacemaker(/.*)?
cluster_var_run_t
/var/run/crm(/.*)?
/var/run/cman_.*
/var/run/rsctmp(/.*)?
/var/run/aisexec.*
/var/run/heartbeat(/.*)?
/var/run/cpglockd.pid
/var/run/corosync.pid
/var/run/rgmanager.pid
/var/run/cluster/rgmanager.sk
dirsrv_config_t
/etc/dirsrv(/.*)?
dirsrv_tmp_t
dirsrv_tmpfs_t
dirsrv_var_lib_t
/var/lib/dirsrv(/.*)?
dirsrv_var_lock_t
/var/lock/dirsrv(/.*)?
dirsrv_var_log_t
/var/log/dirsrv(/.*)?
dirsrv_var_run_t
/var/run/slapd.*
/var/run/dirsrv(/.*)?
faillog_t
/var/log/btmp.*
/var/log/faillog.*
/var/log/tallylog.*
/var/run/faillock(/.*)?
krb5_host_rcache_t
/var/cache/krb5rcache(/.*)?
/var/tmp/nfs_0
/var/tmp/DNS_25
/var/tmp/host_0
/var/tmp/imap_0
/var/tmp/HTTP_23
/var/tmp/HTTP_48
/var/tmp/ldap_55
/var/tmp/ldap_487
/var/tmp/ldapmap1_0
lastlog_t
/var/log/lastlog.*
root_t
/
/initrd
security_t
/selinux
FILE CONTEXTS
SELinux requires files to have an extended attribute to define the file
type.
You can see the context of a file using the -Z option to ls
Policy governs the access confined processes have to these files.
SELinux dirsrv policy is very flexible allowing users to setup their
dirsrv processes in as secure a method as possible.
EQUIVALENCE DIRECTORIES
dirsrv policy stores data with multiple different file context types
under the /var/log/dirsrv directory. If you would like to store the
data in a different directory you can use the semanage command to cre‐
ate an equivalence mapping. If you wanted to store this data under the
/srv dirctory you would execute the following command:
semanage fcontext -a -e /var/log/dirsrv /srv/dirsrv
restorecon -R -v /srv/dirsrv
STANDARD FILE CONTEXT
SELinux defines the file context types for the dirsrv, if you wanted to
store files with these types in a diffent paths, you need to execute
the semanage command to sepecify alternate labeling and then use
restorecon to put the labels on disk.
semanage fcontext -a -t dirsrv_config_t '/srv/dirsrv/content(/.*)?'
restorecon -R -v /srv/mydirsrv_content
Note: SELinux often uses regular expressions to specify labels that
match multiple files.
The following file types are defined for dirsrv:
dirsrv_config_t
- Set files with the dirsrv_config_t type, if you want to treat the
files as dirsrv configuration data, usually stored under the /etc
directory.
dirsrv_exec_t
- Set files with the dirsrv_exec_t type, if you want to transition an
executable to the dirsrv_t domain.
dirsrv_share_t
- Set files with the dirsrv_share_t type, if you want to treat the
files as dirsrv share data.
dirsrv_snmp_exec_t
- Set files with the dirsrv_snmp_exec_t type, if you want to transition
an executable to the dirsrv_snmp_t domain.
dirsrv_snmp_var_log_t
- Set files with the dirsrv_snmp_var_log_t type, if you want to treat
the data as dirsrv snmp var log data, usually stored under the /var/log
directory.
dirsrv_snmp_var_run_t
- Set files with the dirsrv_snmp_var_run_t type, if you want to store
the dirsrv snmp files under the /run or /var/run directory.
dirsrv_tmp_t
- Set files with the dirsrv_tmp_t type, if you want to store dirsrv
temporary files in the /tmp directories.
dirsrv_tmpfs_t
- Set files with the dirsrv_tmpfs_t type, if you want to store dirsrv
files on a tmpfs file system.
dirsrv_var_lib_t
- Set files with the dirsrv_var_lib_t type, if you want to store the
dirsrv files under the /var/lib directory.
dirsrv_var_lock_t
- Set files with the dirsrv_var_lock_t type, if you want to treat the
files as dirsrv var lock data, stored under the /var/lock directory
dirsrv_var_log_t
- Set files with the dirsrv_var_log_t type, if you want to treat the
data as dirsrv var log data, usually stored under the /var/log direc‐
tory.
dirsrv_var_run_t
- Set files with the dirsrv_var_run_t type, if you want to store the
dirsrv files under the /run or /var/run directory.
Paths:
/var/run/slapd.*, /var/run/dirsrv(/.*)?
dirsrvadmin_config_t
- Set files with the dirsrvadmin_config_t type, if you want to treat
the files as dirsrvadmin configuration data, usually stored under the
/etc directory.
Paths:
/etc/dirsrv/dsgw(/.*)?, /etc/dirsrv/admin-serv(/.*)?
dirsrvadmin_exec_t
- Set files with the dirsrvadmin_exec_t type, if you want to transition
an executable to the dirsrvadmin_t domain.
Paths:
/usr/sbin/stop-ds-admin, /usr/sbin/start-ds-admin,
/usr/sbin/restart-ds-admin
dirsrvadmin_lock_t
- Set files with the dirsrvadmin_lock_t type, if you want to treat the
files as dirsrvadmin lock data, stored under the /var/lock directory
dirsrvadmin_tmp_t
- Set files with the dirsrvadmin_tmp_t type, if you want to store
dirsrvadmin temporary files in the /tmp directories.
dirsrvadmin_unconfined_script_exec_t
- Set files with the dirsrvadmin_unconfined_script_exec_t type, if you
want to transition an executable to the dirsrvadmin_unconfined_script_t
domain.
Paths:
/usr/lib/dirsrv/cgi-bin/ds_create, /usr/lib/dirsrv/cgi-
bin/ds_remove
Note: File context can be temporarily modified with the chcon command.
If you want to permanently change the file context you need to use the
semanage fcontext command. This will modify the SELinux labeling data‐
base. You will need to use restorecon to apply the labels.
COMMANDS
semanage fcontext can also be used to manipulate default file context
mappings.
semanage permissive can also be used to manipulate whether or not a
process type is permissive.
semanage module can also be used to enable/disable/install/remove pol‐
icy modules.
semanage boolean can also be used to manipulate the booleans
system-config-selinux is a GUI tool available to customize SELinux pol‐
icy settings.
AUTHOR
This manual page was auto-generated using sepolicy manpage .
SEE ALSOselinux(8), dirsrv(8), semanage(8), restorecon(8), chcon(1), sepol‐
icy(8) , setsebool(8), dirsrv_snmp_selinux(8), dirsrv_snmp_selinux(8)dirsrv 14-05-08 dirsrv_selinux(8)
