dhcpd(8)dhcpd(8)NAMEdhcpd - Dynamic Host Configuration Protocol Server
SYNOPSISdhcpd [ -p port ] [ -f ] [ -d ] [ -q ] [ -t | -T ] [ -cf
config-file ] [ -lf lease-file ] [ -tf trace-output-file ]
[ -play trace-playback-file ] [ if0 [ ...ifN ] ]
DESCRIPTION
The Internet Software Consortium DHCP Server, dhcpd,
implements the Dynamic Host Configuration Protocol (DHCP)
and the Internet Bootstrap Protocol (BOOTP). DHCP allows
hosts on a TCP/IP network to request and be assigned IP
addresses, and also to discover information about the net-
work to which they are attached. BOOTP provides similar
functionality, with certain restrictions.
CONTRIBUTIONS
This software is free software. At various times its
development has been underwritten by various organiza-
tions, including the ISC and Vixie Enterprises. The
development of 3.0 has been funded almost entirely by
Nominum, Inc.
At this point development is being shepherded by Ted
Lemon, and hosted by the ISC, but the future of this pro-
ject depends on you. If you have features you want,
please consider implementing them.
OPERATION
The DHCP protocol allows a host which is unknown to the
network administrator to be automatically assigned a new
IP address out of a pool of IP addresses for its network.
In order for this to work, the network administrator allo-
cates address pools in each subnet and enters them into
the dhcpd.conf(5) file.
On startup, dhcpd reads the dhcpd.conf file and stores a
list of available addresses on each subnet in memory.
When a client requests an address using the DHCP protocol,
dhcpd allocates an address for it. Each client is
assigned a lease, which expires after an amount of time
chosen by the administrator (by default, one day). Before
leases expire, the clients to which leases are assigned
are expected to renew them in order to continue to use the
addresses. Once a lease has expired, the client to which
that lease was assigned is no longer permitted to use the
leased IP address.
In order to keep track of leases across system reboots and
server restarts, dhcpd keeps a list of leases it has
assigned in the dhcpd.leases(5) file. Before dhcpd
grants a lease to a host, it records the lease in this
file and makes sure that the contents of the file are
1
dhcpd(8)dhcpd(8)
flushed to disk. This ensures that even in the event of
a system crash, dhcpd will not forget about a lease that
it has assigned. On startup, after reading the
dhcpd.conf file, dhcpd reads the dhcpd.leases file to
refresh its memory about what leases have been assigned.
New leases are appended to the end of the dhcpd.leases
file. In order to prevent the file from becoming arbi-
trarily large, from time to time dhcpd creates a new
dhcpd.leases file from its in-core lease database. Once
this file has been written to disk, the old file is
renamed dhcpd.leases~, and the new file is renamed
dhcpd.leases. If the system crashes in the middle of
this process, whichever dhcpd.leases file remains will
contain all the lease information, so there is no need for
a special crash recovery process.
BOOTP support is also provided by this server. Unlike
DHCP, the BOOTP protocol does not provide a protocol for
recovering dynamically-assigned addresses once they are no
longer needed. It is still possible to dynamically
assign addresses to BOOTP clients, but some administrative
process for reclaiming addresses is required. By
default, leases are granted to BOOTP clients in perpetu-
ity, although the network administrator may set an earlier
cutoff date or a shorter lease length for BOOTP leases if
that makes sense.
BOOTP clients may also be served in the old standard way,
which is to simply provide a declaration in the dhcpd.conf
file for each BOOTP client, permanently assigning an
address to each client.
Whenever changes are made to the dhcpd.conf file, dhcpd
must be restarted. To restart dhcpd, send a SIGTERM
(signal 15) to the process ID contained in
/var/run/dhcpd.pid, and then re-invoke dhcpd. Because the
DHCP server database is not as lightweight as a BOOTP
database, dhcpd does not automatically restart itself when
it sees a change to the dhcpd.conf file.
Note: We get a lot of complaints about this. We realize
that it would be nice if one could send a SIGHUP to the
server and have it reload the database. This is not
technically impossible, but it would require a great deal
of work, our resources are extremely limited, and they can
be better spent elsewhere. So please don't complain
about this on the mailing list unless you're prepared to
fund a project to implement this feature, or prepared to
do it yourself.
COMMAND LINE
The names of the network interfaces on which dhcpd should
listen for broadcasts may be specified on the command
2
dhcpd(8)dhcpd(8)
line. This should be done on systems where dhcpd is
unable to identify non-broadcast interfaces, but should
not be required on other systems. If no interface names
are specified on the command line dhcpd will identify all
network interfaces which are up, elimininating non-broad-
cast interfaces if possible, and listen for DHCP broad-
casts on each interface.
If dhcpd should listen on a port other than the standard
(port 67), the -p flag may used. It should be followed by
the udp port number on which dhcpd should listen. This is
mostly useful for debugging purposes.
To run dhcpd as a foreground process, rather than allowing
it to run as a daemon in the background, the -f flag
should be specified. This is useful when running dhcpd
under a debugger, or when running it out of inittab on
System V systems.
To have dhcpd log to the standard error descriptor, spec-
ify the -d flag. This can be useful for debugging, and
also at sites where a complete log of all dhcp activity
must be kept but syslogd is not reliable or otherwise can-
not be used. Normally, dhcpd will log all output using
the syslog(3) function with the log facility set to
LOG_DAEMON.
Dhcpd can be made to use an alternate configuration file
with the -cf flag, or an alternate lease file with the -lf
flag. Because of the importance of using the same lease
database at all times when running dhcpd in production,
these options should be used only for testing lease files
or database files in a non-production environment.
When starting dhcpd up from a system startup script (e.g.,
/etc/rc), it may not be desirable to print out the entire
copyright message on startup. To avoid printing this
message, the -q flag may be specified.
The DHCP server reads two files on startup: a configura-
tion file, and a lease database. If the -t flag is spec-
ified, the server will simply test the configuration file
for correct syntax, but will not attempt to perform any
network operations. This can be used to test the a new
configuration file automatically before installing it.
The -T flag can be used to test the lease database file in
a similar way.
The -tf and -play options allow you to specify a file into
which the entire startup state of the server and all the
transactions it processes are either logged or played back
from. This can be useful in submitting bug reports - if
you are getting a core dump every so often, you can start
3
dhcpd(8)dhcpd(8)
the server with the -tf option and then, when the server
dumps core, the trace file will contain all the transac-
tions that led up to it dumping core, so that the problem
can be easily debugged with -play.
The -play option must be specified with an alternate lease
file, using the -lf switch, so that the DHCP server
doesn't wipe out your existing lease file with its test
data. The DHCP server will refuse to operate in playback
mode unless you specify an alternate lease file.
CONFIGURATION
The syntax of the dhcpd.conf(5) file is discussed seper-
ately. This section should be used as an overview of the
configuration process, and the dhcpd.conf(5) documentation
should be consulted for detailed reference information.
Subnetsdhcpd needs to know the subnet numbers and netmasks of all
subnets for which it will be providing service. In addi-
tion, in order to dynamically allocate addresses, it must
be assigned one or more ranges of addresses on each subnet
which it can in turn assign to client hosts as they boot.
Thus, a very simple configuration providing DHCP support
might look like this:
subnet 239.252.197.0 netmask 255.255.255.0 {
range 239.252.197.10 239.252.197.250;
}
Multiple address ranges may be specified like this:
subnet 239.252.197.0 netmask 255.255.255.0 {
range 239.252.197.10 239.252.197.107;
range 239.252.197.113 239.252.197.250;
}
If a subnet will only be provided with BOOTP service and
no dynamic address assignment, the range clause can be
left out entirely, but the subnet statement must appear.
Lease Lengths
DHCP leases can be assigned almost any length from zero
seconds to infinity. What lease length makes sense for
any given subnet, or for any given installation, will vary
depending on the kinds of hosts being served.
For example, in an office environment where systems are
added from time to time and removed from time to time, but
move relatively infrequently, it might make sense to allow
lease times of a month of more. In a final test environ-
ment on a manufacturing floor, it may make more sense to
4
dhcpd(8)dhcpd(8)
assign a maximum lease length of 30 minutes - enough time
to go through a simple test procedure on a network appli-
ance before packaging it up for delivery.
It is possible to specify two lease lengths: the default
length that will be assigned if a client doesn't ask for
any particular lease length, and a maximum lease length.
These are specified as clauses to the subnet command:
subnet 239.252.197.0 netmask 255.255.255.0 {
range 239.252.197.10 239.252.197.107;
default-lease-time 600;
max-lease-time 7200;
|
This particular subnet declaration specifies a default
lease time of 600 seconds (ten minutes), and a maximum
lease time of 7200 seconds (two hours). Other common
values would be 86400 (one day), 604800 (one week) and
2592000 (30 days).
Each subnet need not have the same lease--in the case of
an office environment and a manufacturing environment
served by the same DHCP server, it might make sense to
have widely disparate values for default and maximum lease
times on each subnet.
BOOTP Support
Each BOOTP client must be explicitly declared in the
dhcpd.conf file. A very basic client declaration will
specify the client network interface's hardware address
and the IP address to assign to that client. If the
client needs to be able to load a boot file from the
server, that file's name must be specified. A simple
bootp client declaration might look like this:
host haagen {
hardware ethernet 08:00:2b:4c:59:23;
fixed-address 239.252.197.9;
filename "/tftpboot/haagen.boot";
}
Options
DHCP (and also BOOTP with Vendor Extensions) provide a
mechanism whereby the server can provide the client with
information about how to configure its network interface
(e.g., subnet mask), and also how the client can access
various network services (e.g., DNS, IP routers, and so
on).
These options can be specified on a per-subnet basis, and,
for BOOTP clients, also on a per-client basis. In the
event that a BOOTP client declaration specifies options
that are also specified in its subnet declaration, the
5
dhcpd(8)dhcpd(8)
options specified in the client declaration take prece-
dence. An reasonably complete DHCP configuration might
look something like this:
subnet 239.252.197.0 netmask 255.255.255.0 {
range 239.252.197.10 239.252.197.250;
default-lease-time 600 max-lease-time 7200;
option subnet-mask 255.255.255.0;
option broadcast-address 239.252.197.255;
option routers 239.252.197.1;
option domain-name-servers 239.252.197.2, 239.252.197.3;
option domain-name "isc.org";
}
A bootp host on that subnet that needs to be in a differ-
ent domain and use a different name server might be
declared as follows:
host haagen {
hardware ethernet 08:00:2b:4c:59:23;
fixed-address 239.252.197.9;
filename "/tftpboot/haagen.boot";
option domain-name-servers 192.5.5.1;
option domain-name "vix.com";
}
A more complete description of the dhcpd.conf file syntax
is provided in dhcpd.conf(5).
OMAPI
The DHCP server provides the capability to modify some of
its configuration while it is running, without stopping
it, modifying its database files, and restarting it. This
capability is currently provided using OMAPI - an API for
manipulating remote objects. OMAPI clients connect to the
server using TCP/IP, authenticate, and can then examine
the server's current status and make changes to it.
Rather than implementing the underlying OMAPI protocol
directly, user programs should use the dhcpctl API or
OMAPI itself. Dhcpctl is a wrapper that handles some of
the housekeeping chores that OMAPI does not do automati-
cally. Dhcpctl and OMAPI are documented in dhcpctl(3)
and omapi(3).
OMAPI exports objects, which can then be examined and mod-
ified. The DHCP server exports the following objects:
lease, host, failover-state and group. Each object has a
number of methods that are provided: lookup, create, and
destroy. In addition, it is possible to look at
attributes that are stored on objects, and in some cases
to modify those attributes.
6
dhcpd(8)dhcpd(8)THE LEASE OBJECT
Leases can't currently be created or destroyed, but they
can be looked up to examine and modify their state.
Leases have the following attributes:
state integer lookup, examine
1 = free
2 = active
3 = expired
4 = released
5 = abandoned
6 = reset
7 = backup
8 = reserved
9 = bootp
ip-address data lookup, examine
The IP address of the lease.
dhcp-client-identifier data lookup, examine, update
The client identifier that the client used when it
acquired the lease. Not all clients send client
identifiers, so this may be empty.
client-hostname data examine, update
The value the client sent in the host-name option.
host handle examine
the host declaration associated with this lease, if
any.
subnet handle examine
the subnet object associated with this lease (the
subnet object is not currently supported).
pool handle examine
the pool object associted with this lease (the pool
object is not currently supported).
billing-class handle examine
the handle to the class to which this lease is cur-
rently billed, if any (the class object is not cur-
rently supported).
hardware-address data examine, update
the hardware address (chaddr) field sent by the
client when it acquired its lease.
hardware-type integer examine, update
the type of the network interface that the client
reported when it acquired its lease.
ends time examine
7
dhcpd(8)dhcpd(8)
the time when the lease's current state ends, as
understood by the client.
tstp time examine
the time when the lease's current state ends, as
understood by the server.
tsfp time examine
the time when the lease's current state ends, as
understood by the failover peer (if there is no
failover peer, this value is undefined).
cltt time examine
The time of the last transaction with the client on
this lease.
THE HOST OBJECT
Hosts can be created, destroyed, looked up, examined and
modified. If a host declaration is created or deleted
using OMAPI, that information will be recorded in the
dhcpd.leases file. It is permissible to delete host dec-
larations that are declared in the dhcpd.conf file.
Hosts have the following attributes:
name data lookup, examine, modify
the name of the host declaration. This name must be
unique among all host declarations.
group handle examine, modify
the named group associated with the host declaration,
if there is one.
hardware-address data lookup, examine, modify
the link-layer address that will be used to match the
client, if any. Only valid if hardware-type is also
present.
hardware-type integer lookup, examine, modify
the type of the network interface that will be used
to match the client, if any. Only valid if hard-
ware-address is also present.
dhcp-client-identifier data lookup, examine, modify
the dhcp-client-identifier option that will be used
to match the client, if any.
ip-address data examine, modify
a fixed IP address which is reserved for a DHCP
client that matches this host declaration. The IP
address will only be assigned to the client if it is
valid for the network segment to which the client is
connected.
statements data modify
8
dhcpd(8)dhcpd(8)
a list of statements in the format of the dhcpd.conf
file that will be executed whenever a message from
the client is being processed.
known integer examine, modify
if nonzero, indicates that a client matching this
host declaration will be treated as known in pool
permit lists. If zero, the client will not be
treated as known.
THE GROUP OBJECT
Named groups can be created, destroyed, looked up, exam-
ined and modified. If a group declaration is created or
deleted using OMAPI, that information will be recorded in
the dhcpd.leases file. It is permissible to delete group
declarations that are declared in the dhcpd.conf file.
Named groups currently can only be associated with hosts -
this allows one set of statements to be efficiently
attached to more than one host declaration.
Groups have the following attributes:
name data
the name of the group. All groups that are created
using OMAPI must have names, and the names must be
unique among all groups.
statements data
a list of statements in the format of the dhcpd.conf
file that will be executed whenever a message from a
client whose host declaration references this group
is processed.
THE CONTROL OBJECT
The control object allows you to shut the server down.
If the server is doing failover with another peer, it will
make a clean transition into the shutdown state and notify
its peer, so that the peer can go into partner down, and
then record the "recover" state in the lease file so that
when the server is restarted, it will automatically resyn-
chronize with its peer.
On shutdown the server will also attempt to cleanly shut
down all OMAPI connections. If these connections do not
go down cleanly after five seconds, they are shut down
pre-emptively. It can take as much as 25 seconds from the
beginning of the shutdown process to the time that the
server actually exits.
To shut the server down, open its control object and set
the state attribute to 2.
9
dhcpd(8)dhcpd(8)THE FAILOVER-STATE OBJECT
The failover-state object is the object that tracks the
state of the failover protocol as it is being managed for
a given failover peer. The failover object has the fol-
lowing attributes (please see dhcpd.conf (5) for explana-
tions about what these attributes mean):
name data examine
Indicates the name of the failover peer relationship,
as described in the server's dhcpd.conf file.
partner-address data examine
Indicates the failover partner's IP address.
local-address data examine
Indicates the IP address that is being used by the
DHCP server for this failover pair.
partner-port data examine
Indicates the TCP port on which the failover partner
is listening for failover protocol connections.
local-port data examine
Indicates the TCP port on which the DHCP server is
listening for failover protocol connections for this
failover pair.
max-outstanding-updates integer examine
Indicates the number of updates that can be outstand-
ing and unacknowledged at any given time, in this
failover relationship.
mclt integer examine
Indicates the maximum client lead time in this
failover relationship.
load-balance-max-secs integer examine
Indicates the maximum value for the secs field in a
client request before load balancing is bypassed.
load-balance-hba data examine
Indicates the load balancing hash bucket array for
this failover relationship.
local-state integer examine, modify
Indicates the present state of the DHCP server in
this failover relationship. Possible values for
state are:
1 - partner down
2 - normal
3 - communications interrupted
4 - resolution interrupted
5 - potential conflict
10
dhcpd(8)dhcpd(8)
6 - recover
7 - recover done
8 - shutdown
9 - paused
10 - startup
11 - recover wait
In general it is not a good idea to make changes to
this state. However, in the case that the failover
partner is known to be down, it can be useful to set
the DHCP server's failover state to partner down.
At this point the DHCP server will take over service
of the failover partner's leases as soon as possible,
and will give out normal leases, not leases that are
restricted by MCLT. If you do put the DHCP server
into the partner-down when the other DHCP server is
not in the partner-down state, but is not reachable,
IP address assignment conflicts are possible, even
likely. Once a server has been put into partner-
down mode, its failover partner must not be brought
back online until communication is possible between
the two servers.
partner-state integer examine
Indicates the present state of the failover partner.
local-stos integer examine
Indicates the time at which the DHCP server entered
its present state in this failover relationship.
partner-stos integer examine
Indicates the time at which the failover partner
entered its present state.
hierarchy integer examine
Indicates whether the DHCP server is primary (0) or
secondary (1) in this failover relationship.
last-packet-sent integer examine
Indicates the time at which the most recent failover
packet was sent by this DHCP server to its failover
partner.
last-timestamp-received integer examine
Indicates the timestamp that was on the failover mes-
sage most recently received from the failover part-
ner.
skew integer examine
Indicates the skew between the failover partner's
clock and this DHCP server's clock
max-response-delay integer examine
Indicates the time in seconds after which, if no
11
dhcpd(8)dhcpd(8)
message is received from the failover partner, the
partner is assumed to be out of communication.
cur-unacked-updates integer examine
Indicates the number of update messages that have
been received from the failover partner but not yet
processed.
FILES
/etc/dhcpd.conf, /var/db/dhcpd.leases, /var/run/dhcpd.pid,
/var/db/dhcpd.leases~.
SEE ALSOdhclient(8), dhcrelay(8), dhcpd.conf(5), dhcpd.leases(5)AUTHORdhcpd(8) was originally written by Ted Lemon under a con-
tract with Vixie Labs. Funding for this project was pro-
vided by the Internet Software Consortium. Version 3 of
the DHCP server was funded by Nominum, Inc. Information
about the Internet Software Consortium is available at
http://www.isc.org/isc. Information about Nominum and
support contracts for DHCP and BIND can be found at
http://www.nominum.com.
12
