dbus-daemon man page on Oracle

Man page or keyword search:  
man Server   33470 pages
apropos Keyword Search (all sections)
Output format
Oracle logo
[printable version]

dbus-daemon(1)							dbus-daemon(1)

NAME
       dbus-daemon - Message bus daemon

SYNOPSIS
       dbus-daemon  dbus-daemon	 [--version]  [--session]  [--system]  [--con‐
       fig-file=FILE]  [--print-address[=DESCRIPTOR]]	[--print-pid[=DESCRIP‐
       TOR]] [--fork]

DESCRIPTION
       dbus-daemon  is	the D-Bus message bus daemon. See http://www.freedesk‐
       top.org/software/dbus/ for more	information  about  the	 big  picture.
       D-Bus is first a library that provides one-to-one communication between
       any two applications; dbus-daemon is  an	 application  that  uses  this
       library to implement a message bus daemon. Multiple programs connect to
       the message bus daemon and can exchange messages with one another.

       There are two standard message bus instances:  the  systemwide  message
       bus  (installed	on  many systems as the "messagebus" init service) and
       the per-user-login-session message bus (started each time a  user  logs
       in).   dbus-daemon is used for both of these instances, but with a dif‐
       ferent configuration file.

       The --session option is equivalent  to  "--config-file=/etc/dbus-1/ses‐
       sion.conf"   and	  the	--system   option  is  equivalent  to  "--con‐
       fig-file=/etc/dbus-1/system.conf". By creating additional configuration
       files  and  using  the --config-file option, additional special-purpose
       message bus daemons could be created.

       The systemwide daemon is normally launched by  an  init	script,	 stan‐
       dardly called simply "messagebus".

       The  systemwide	daemon is largely used for broadcasting system events,
       such as changes to the printer queue, or adding/removing devices.

       The per-session daemon is used for various  interprocess	 communication
       among  desktop applications (however, it is not tied to X or the GUI in
       any way).

       SIGHUP will cause the D-Bus daemon to PARTIALLY reload  its  configura‐
       tion file and to flush its user/group information caches. Some configu‐
       ration changes would require kicking all apps off the bus; so they will
       only  take effect if you restart the daemon. Policy changes should take
       effect with SIGHUP.

OPTIONS
       The following options are supported:

       --config-file=FILE
	      Use the given configuration file.

       --fork Force the message bus to fork and become a daemon, even  if  the
	      configuration  file  does	 not  specify that it should.  In most
	      contexts the configuration file already gets this right, though.
	      --nofork	Force the message bus not to fork and become a daemon,
	      even if the configuration file specifies that it should.

       --print-address[=DESCRIPTOR]
	      Print the address of the message bus to standard output,	or  to
	      the  given file descriptor. This is used by programs that launch
	      the message bus.

       --print-pid[=DESCRIPTOR]
	      Print the process ID of the message bus to standard  output,  or
	      to  the  given  file  descriptor.	 This is used by programs that
	      launch the message bus.

       --session
	      Use the standard configuration file  for	the  per-login-session
	      message bus.

       --system
	      Use  the	standard configuration file for the systemwide message
	      bus.

       --version
	      Print the version of the daemon.

       --introspect
	      Print the	 introspection	information  for  all  D-Bus  internal
	      interfaces.

       --address[=ADDRESS]
	      Set  the address to listen on. This option overrides the address
	      configured in the configuration file.

       --systemd-activation
	      Enable systemd-style service activation. Only useful in conjunc‐
	      tion with the systemd system and session manager on Linux.

       --nopidfile
	      Don't write a PID file even if one is configured in the configu‐
	      ration files.

CONFIGURATION FILE
       A message bus daemon has a configuration file that specializes it for a
       particular  application.	 For example, one configuration file might set
       up the message bus to be a systemwide message bus, while another	 might
       set it up to be a per-user-login-session bus.

       The  configuration  file	 also  establishes  resource  limits, security
       parameters, and so forth.

       The configuration file is not part of any  interoperability  specifica‐
       tion and its backward compatibility is not guaranteed; this document is
       documentation, not specification.

       The standard systemwide and per-session message bus setups are  config‐
       ured  in	 the  files  "/etc/dbus-1/system.conf"	and  "/etc/dbus-1/ses‐
       sion.conf".  These files normally <include> a system-local.conf or ses‐
       sion-local.conf;	 you  can  put local overrides in those files to avoid
       modifying the primary configuration files.

       The configuration file is an XML document. It must have	the  following
       doctype declaration:

	  <!DOCTYPE busconfig PUBLIC "-//freedesktop//DTD D-Bus Bus Configuration 1.0//EN"
	   "http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd">

       The following elements may be present in the configuration file.

       <busconfig>

       Root element.

       <type>

       The  well-known	type  of  the  message bus. Currently known values are
       "system" and "session"; if other values are set, they should be	either
       added  to the D-Bus specification, or namespaced.  The last <type> ele‐
       ment "wins" (previous values are ignored). This element	only  controls
       which  message  bus specific environment variables are set in activated
       clients.	 Most of the policy that distinguishes a session bus from  the
       system  bus  is controlled from the other elements in the configuration
       file.

       If the well-known type of  the  message	bus  is	 "session",  then  the
       DBUS_STARTER_BUS_TYPE environment variable will be set to "session" and
       the DBUS_SESSION_BUS_ADDRESS environment variable will be  set  to  the
       address	of  the session bus.  Likewise, if the type of the message bus
       is "system", then the DBUS_STARTER_BUS_TYPE environment	variable  will
       be  set	to "system" and the DBUS_SESSION_BUS_ADDRESS environment vari‐
       able will be set to the address of the system bus  (which  is  normally
       well known anyway).

       Example: <type>session</type>

       <include>

       Include	a file <include>filename.conf</include> at this point.	If the
       filename is relative, it is located relative to the configuration  file
       doing the including.

       <include>  has  an  optional  attribute "ignore_missing=(yes|no)" which
       defaults to "no" if not provided. This attribute controls whether  it's
       a fatal error for the included file to be absent.

       <includedir>

       Include	all  files  in	<includedir>foo.d</includedir>	at this point.
       Files in the directory are included in  undefined  order.   Only	 files
       ending in ".conf" are included.

       This  is	 intended  to  allow extension of the system bus by particular
       packages. For example, if CUPS wants to be able to send	out  notifica‐
       tion   of   printer   queue   changes,  it  could  install  a  file  to
       /etc/dbus-1/system.d that allowed all apps to receive this message  and
       allowed the printer daemon user to send it.

       <user>

       The  user  account  the daemon should run as, as either a username or a
       UID. If the daemon cannot change to this UID on startup, it will	 exit.
       If  this	 element  is  not  present, the daemon will not change or care
       about its UID.

       The last <user> entry in the file "wins", the others are ignored.

       The user is changed after the bus  has  completed  initialization.   So
       sockets	etc. will be created before changing user, but no data will be
       read from clients before changing user. This means that sockets and PID
       files  can  be  created in a location that requires root privileges for
       writing.

       <fork>

       If present, the bus daemon becomes a real daemon (forks into the	 back‐
       ground,	etc.).	This  is generally used rather than the --fork command
       line option.

       <keep_umask>

       If present, the bus daemon keeps its original umask when forking.  This
       may be useful to avoid affecting the behavior of child processes.

       <listen>

       Add  an	address	 that  the bus should listen on. The address is in the
       standard D-Bus format that contains  a  transport  name	plus  possible
       parameters/options.

       Example: <listen>unix:path=/tmp/foo</listen>

       Example: <listen>tcp:host=localhost,port=1234</listen>

       If there are multiple <listen> elements, then the bus listens on multi‐
       ple addresses. The bus will pass its address  to	 started  services  or
       other interested parties with the last address given in <listen> first.
       That is, apps will try to connect to the last <listen> address first.

       tcp sockets can accept IPv4 addresses, IPv6 addresses or hostnames.  If
       a  hostname resolves to multiple addresses, the server will bind to all
       of them. The family=ipv4 or family=ipv6 options can be used to force it
       to bind to a subset of addresses

       Example: <listen>tcp:host=localhost,port=0,family=ipv4</listen>

       A  special  case is using a port number of zero (or omitting the port),
       which means to choose an available port selected by the operating  sys‐
       tem.  The  port	number chosen can be obtained with the --print-address
       command line parameter and will be present in  other  cases  where  the
       server  reports	its own address, such as when DBUS_SESSION_BUS_ADDRESS
       is set.

       Example: <listen>tcp:host=localhost,port=0</listen>

       tcp addresses also allow a bind=hostname option,	 which	will  override
       the  host  option  specifying what address to bind to, without changing
       the address reported by the bus. The bind option can also take  a  spe‐
       cial  name  '*'	to  cause  the	bus  to	 listen	 on  all local address
       (INADDR_ANY). The specified host should be a valid name	of  the	 local
       machine or weird stuff will happen.

       Example: <listen>tcp:host=localhost,bind=*,port=0</listen>

       <auth>

       Lists  permitted	 authorization	mechanisms.  If	 this  element doesn't
       exist, then all known mechanisms are allowed.  If  there	 are  multiple
       <auth>  elements,  all the listed mechanisms are allowed.  The order in
       which mechanisms are listed is not meaningful.

       Example: <auth>EXTERNAL</auth>

       Example: <auth>DBUS_COOKIE_SHA1</auth>

       <servicedir>

       Adds a directory to scan for .service files.  Directories  are  scanned
       starting with the last to appear in the config file (the first .service
       file found that provides a particular service will be used).

       Service files tell the bus how to automatically start a program.	  They
       are  primarily  used  with the per-user-session bus, not the systemwide
       bus.

       <standard_session_servicedirs/>

       <standard_session_servicedirs/> is equivalent to specifying a series of
       <servicedir/>  elements	for  each  of the data directories in the "XDG
       Base Directory Specification" with the subdirectory  "dbus-1/services",
       so for example "/usr/share/dbus-1/services" would be among the directo‐
       ries searched.

       The "XDG Base Directory Specification" can be found at http://freedesk‐
       top.org/wiki/Standards/basedir-spec  if	it hasn't moved, otherwise try
       your favorite search engine.

       The <standard_session_servicedirs/> option  is  only  relevant  to  the
       per-user-session	  bus	daemon	defined	 in  /etc/dbus-1/session.conf.
       Putting it in any other configuration file would probably be nonsense.

       <standard_system_servicedirs/>

       <standard_system_servicedirs/> specifies the standard system-wide acti‐
       vation  directories  that  should  be searched for service files.  This
       option defaults to /usr/share/dbus-1/system-services.

       The <standard_system_servicedirs/>  option  is  only  relevant  to  the
       per-system bus daemon defined in /etc/dbus-1/system.conf. Putting it in
       any other configuration file would probably be nonsense.

       <servicehelper/>

       <servicehelper/> specifies the setuid helper that  is  used  to	launch
       system  daemons	with  an  alternate user. Typically this should be the
       dbus-daemon-launch-helper executable in located in libexec.

       The <servicehelper/> option is only relevant to the per-system bus dae‐
       mon defined in /etc/dbus-1/system.conf. Putting it in any other config‐
       uration file would probably be nonsense.

       <limit>

       <limit> establishes a resource limit. For example:
	 <limit name="max_message_size">64</limit>
	 <limit name="max_completed_connections">512</limit>

       The name attribute is mandatory.	 Available limit names are:
	     "max_incoming_bytes"	  : total size in bytes of messages
					    incoming from a single connection
	     "max_incoming_unix_fds"	  : total number of unix fds of messages
					    incoming from a single connection
	     "max_outgoing_bytes"	  : total size in bytes of messages
					    queued up for a single connection
	     "max_outgoing_unix_fds"	  : total number of unix fds of messages
					    queued up for a single connection
	     "max_message_size"		  : max size of a single message in
					    bytes
	     "max_message_unix_fds"	  : max unix fds of a single message
	     "service_start_timeout"	  : milliseconds (thousandths) until
					    a started service has to connect
	     "auth_timeout"		  : milliseconds (thousandths) a
					    connection is given to
					    authenticate
	     "max_completed_connections"  : max number of authenticated connections
	     "max_incomplete_connections" : max number of unauthenticated
					    connections
	     "max_connections_per_user"	  : max number of completed connections from
					    the same user
	     "max_pending_service_starts" : max number of service launches in
					    progress at the same time
	     "max_names_per_connection"	  : max number of names a single
					    connection can own
	     "max_match_rules_per_connection": max number of match rules for a single
					       connection
	     "max_replies_per_connection" : max number of pending method
					    replies per connection
					    (number of calls-in-progress)
	     "reply_timeout"		  : milliseconds (thousandths)
					    until a method call times out

       The max incoming/outgoing queue sizes allow a new message to be	queued
       if one byte remains below the max. So you can in fact exceed the max by
       max_message_size.

       max_completed_connections divided by  max_connections_per_user  is  the
       number  of  users that can work together to denial-of-service all other
       users by using up all connections on the systemwide bus.

       Limits are normally only of interest on the  systemwide	bus,  not  the
       user session buses.

       <policy>

       The  <policy> element defines a security policy to be applied to a par‐
       ticular set of connections to the bus. A policy is made up  of  <allow>
       and  <deny>  elements.  Policies	 are normally used with the systemwide
       bus; they are analogous to a firewall in that they allow expected traf‐
       fic and prevent unexpected traffic.

       Currently,  the system bus has a default-deny policy for sending method
       calls and owning bus names.  Everything else, in particular reply  mes‐
       sages, receive checks, and signals has a default allow policy.

       In  general, it is best to keep system services as small, targeted pro‐
       grams which run in their own process and provide	 a  single  bus	 name.
       Then, all that is needed is an <allow> rule for the "own" permission to
       let the process claim the bus name, and a  "send_destination"  rule  to
       allow traffic from some or all uids to your service.

       The <policy> element has one of four attributes:
	 context="(default|mandatory)"
	 at_console="(true|false)"
	 user="username or userid"
	 group="group name or gid"

       Policies are applied to a connection as follows:
	  - all context="default" policies are applied
	  - all group="connection's user's group" policies are applied
	    in undefined order
	  - all user="connection's auth user" policies are applied
	    in undefined order
	  - all at_console="true" policies are applied
	  - all at_console="false" policies are applied
	  - all context="mandatory" policies are applied

       Policies	 applied  later	 will override those applied earlier, when the
       policies overlap. Multiple policies with	 the  same  user/group/context
       are applied in the order they appear in the config file.

       <deny> <allow>

       A  <deny>  element  appears below a <policy> element and prohibits some
       action. The <allow> element  makes  an  exception  to  previous	<deny>
       statements, and works just like <deny> but with the inverse meaning.

       The possible attributes of these elements are:
	  send_interface="interface_name"
	  send_member="method_or_signal_name"
	  send_error="error_name"
	  send_destination="name"
	  send_type="method_call" | "method_return" | "signal" | "error"
	  send_path="/path/name"

	  receive_interface="interface_name"
	  receive_member="method_or_signal_name"
	  receive_error="error_name"
	  receive_sender="name"
	  receive_type="method_call" | "method_return" | "signal" | "error"
	  receive_path="/path/name"

	  send_requested_reply="true" | "false"
	  receive_requested_reply="true" | "false"

	  eavesdrop="true" | "false"

	  own="name"
	  own_prefix="name"
	  user="username"
	  group="groupname"

       Examples:
	  <deny send_destination="org.freedesktop.Service" send_interface="org.freedesktop.System" send_member="Reboot"/>
	  <deny send_destination="org.freedesktop.System"/>
	  <deny receive_sender="org.freedesktop.System"/>
	  <deny user="john"/>
	  <deny group="enemies"/>

       The  <deny> element's attributes determine whether the deny "matches" a
       particular action. If it matches, the action is	denied	(unless	 later
       rules in the config file allow it).

       send_destination and receive_sender rules mean that messages may not be
       sent to or received from the *owner* of the given name, not  that  they
       may  not be sent *to that name*. That is, if a connection owns services
       A, B, C, and sending to A is denied, sending to B or C  will  not  work
       either.

       The  other  send_* and receive_* attributes are purely textual/by-value
       matches against the given field in the message header.

       "Eavesdropping" occurs when an application receives a message that  was
       explicitly  addressed  to  a name the application does not own, or is a
       reply to such a message. Eavesdropping thus only	 applies  to  messages
       that  are  addressed  to services and replies to such messages (i.e. it
       does not apply to signals).

       For <allow>, eavesdrop="true" indicates that the rule matches even when
       eavesdropping. eavesdrop="false" is the default and means that the rule
       only allows messages to go to their specified recipient.	  For  <deny>,
       eavesdrop="true"	 indicates  that the rule matches only when eavesdrop‐
       ping. eavesdrop="false" is the default for <deny>  also,	 but  here  it
       means  that  the	 rule applies always, even when not eavesdropping. The
       eavesdrop attribute can only be combined with send  and	receive	 rules
       (with send_* and receive_* attributes).

       The  [send|receive]_requested_reply  attribute  works  similarly to the
       eavesdrop attribute. It controls whether the <deny> or <allow>  matches
       a  reply	 that  is expected (corresponds to a previous method call mes‐
       sage).  This attribute only makes sense for reply messages (errors  and
       method returns), and is ignored for other message types.

       For  <allow>,  [send|receive]_requested_reply="true" is the default and
       indicates  that	only  requested	 replies  are  allowed	by  the	 rule.
       [send|receive]_requested_reply="false"  means  that the rule allows any
       reply even if unexpected.

       For <deny>, [send|receive]_requested_reply="false" is the  default  but
       indicates  that the rule matches only when the reply was not requested.
       [send|receive]_requested_reply="true" indicates that the	 rule  applies
       always, regardless of pending reply state.

       user  and  group denials mean that the given user or group may not con‐
       nect to the message bus.

       For "name", "username", "groupname", etc.  the  character  "*"  can  be
       substituted,  meaning  "any."  Complex  globs  like  "foo.bar.*" aren't
       allowed for now because they'd be work to implement and maybe encourage
       sloppy security anyway.

       <allow  own_prefix="a.b"/> allows you to own the name "a.b" or any name
       whose first dot-separated elements are "a.b": in	 particular,  you  can
       own "a.b.c" or "a.b.c.d", but not "a.bc" or "a.c".  This is useful when
       services like Telepathy and ReserveDevice define a meaning for subtrees
       of  well-known  names, such as org.freedesktop.Telepathy.ConnectionMan‐
       ager.(anything) and org.freedesktop.ReserveDevice1.(anything).

       It does not make sense to deny a user or group inside a <policy> for  a
       user  or group; user/group denials can only be inside context="default"
       or context="mandatory" policies.

       A single <deny> rule may specify combinations  of  attributes  such  as
       send_destination	 and  send_interface  and send_type. In this case, the
       denial applies only if both attributes match the message being  denied.
       e.g. <deny send_interface="foo.bar" send_destination="foo.blah"/> would
       deny messages with the given interface AND the given bus name.  To  get
       an OR effect you specify multiple <deny> rules.

       You  can't include both send_ and receive_ attributes on the same rule,
       since "whether the  message  can	 be  sent"  and	 "whether  it  can  be
       received" are evaluated separately.

       Be careful with send_interface/receive_interface, because the interface
       field in messages is optional.  In particular,  do  NOT	specify	 <deny
       send_interface="org.foo.Bar"/>!	 This will cause no-interface messages
       to be blocked for all services, which is almost certainly not what  you
       intended.    Always   use   rules   of	the  form:  <deny  send_inter‐
       face="org.foo.Bar" send_destination="org.foo.Service"/>

       <selinux>

       The <selinux> element contains settings related	to  Security  Enhanced
       Linux.  More details below.

       <associate>

       An <associate> element appears below an <selinux> element and creates a
       mapping. Right now only one kind of association is possible:
	  <associate own="org.freedesktop.Foobar" context="foo_t"/>

       This means that if a connection asks to	own  the  name	"org.freedesk‐
       top.Foobar"  then the source context will be the context of the connec‐
       tion and the target context will be "foo_t" - see the short  discussion
       of SELinux below.

       Note,  the  context  here is the target context when requesting a name,
       NOT the context of the connection owning the name.

       There's currently no way to set a default for owning any	 name,	if  we
       add this syntax it will look like:
	  <associate own="*" context="foo_t"/>
       If  you	find  a reason this is useful, let the developers know.	 Right
       now the default will be the security context of the bus itself.

       If two <associate> elements specify the same name, the element  appear‐
       ing later in the configuration file will be used.

SELinux
       See  http://www.nsa.gov/selinux/ for full details on SELinux. Some use‐
       ful excerpts:

	       Every subject (process) and  object  (e.g.  file,  socket,  IPC
	       object, etc) in the system is assigned a collection of security
	       attributes, known as a security	context.  A  security  context
	       contains	 all of the security attributes associated with a par‐
	       ticular subject or object that are  relevant  to	 the  security
	       policy.

	       In order to better encapsulate security contexts and to provide
	       greater efficiency, the policy enforcement code of SELinux typ‐
	       ically handles security identifiers (SIDs) rather than security
	       contexts. A SID is an integer that is mapped  by	 the  security
	       server to a security context at runtime.

	       When  a	security  decision is required, the policy enforcement
	       code passes a pair of SIDs (typically the SID of a subject  and
	       the SID of an object, but sometimes a pair of subject SIDs or a
	       pair of object SIDs), and an object security class to the secu‐
	       rity  server.  The  object security class indicates the kind of
	       object, e.g. a process, a regular  file,	 a  directory,	a  TCP
	       socket, etc.

	       Access decisions specify whether or not a permission is granted
	       for a given pair of SIDs and class. Each object class has a set
	       of  associated  permissions  defined  to	 control operations on
	       objects with that class.

       D-Bus performs SELinux security checks in two places.

       First, any time a message is routed from one connection to another con‐
       nection,	 the  bus daemon will check permissions with the security con‐
       text of the first connection as source, security context of the	second
       connection  as  target,	object	class  "dbus" and requested permission
       "send_msg".

       If a security context is not available  for  a  connection  (impossible
       when  using  UNIX  domain sockets), then the target context used is the
       context of the bus daemon itself.  There is currently no way to	change
       this default, because we're assuming that only UNIX domain sockets will
       be used to connect to the systemwide bus. If this changes, we'll proba‐
       bly add a way to set the default connection context.

       Second,	any  time a connection asks to own a name, the bus daemon will
       check permissions with  the  security  context  of  the	connection  as
       source,	the security context specified for the name in the config file
       as target, object class "dbus" and requested permission "acquire_svc".

       The security context for a bus name is specified with  the  <associate>
       element	described earlier in this document.  If a name has no security
       context associated in the configuration file, the security  context  of
       the bus daemon itself will be used.

DEBUGGING
       If you're trying to figure out where your messages are going or why you
       aren't getting messages, there are several things you can try.

       Remember that the system bus is heavily locked down and if you  haven't
       installed  a  security  policy  file  to allow your message through, it
       won't work. For the session bus, this is not a concern.

       The simplest way to figure out what's happening on the bus  is  to  run
       the  dbus-monitor  program, which comes with the D-Bus package. You can
       also send test messages with dbus-send. These programs have  their  own
       man pages.

       If you want to know what the daemon itself is doing, you might consider
       running a separate copy of the daemon to test against. This will	 allow
       you  to put the daemon under a debugger, or run it with verbose output,
       without messing up your real session and system daemons.

       To run a separate test copy of the daemon, for example you might open a
       terminal and type:
	 DBUS_VERBOSE=1 dbus-daemon --session --print-address

       The  test  daemon  address  will be printed when the daemon starts. You
       will need to copy-and-paste this address and use it as the value of the
       DBUS_SESSION_BUS_ADDRESS	 environment  variable	when  you  launch  the
       applications you want to test. This will cause  those  applications  to
       connect	to  your  test	bus instead of the DBUS_SESSION_BUS_ADDRESS of
       your real session bus.

       DBUS_VERBOSE=1 will have NO EFFECT unless your copy of D-Bus  was  com‐
       piled  with verbose mode enabled. This is not recommended in production
       builds due to performance impact. You may need to rebuild D-Bus if your
       copy  was  not built with debugging in mind. (DBUS_VERBOSE also affects
       the D-Bus library and thus applications using D-Bus; it may  be	useful
       to see verbose output on both the client side and from the daemon.)

       If you want to get fancy, you can create a custom bus configuration for
       your test bus (see the session.conf and system.conf files  that	define
       the  two	 default  configurations for example). This would allow you to
       specify a different directory for .service files, for example.

AUTHOR
       See http://www.freedesktop.org/software/dbus/doc/AUTHORS

BUGS
       Please send bug reports to the D-Bus mailing list or bug	 tracker,  see
       http://www.freedesktop.org/software/dbus/

								dbus-daemon(1)
[top]

List of man pages available for Oracle

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net