DAHDI_CFG(8)DAHDI_CFG(8)NAMEdahdi_cfg - configures DAHDI kernel modules from /etc/dahdi/system.conf
SYNOPSISdahdi_cfg [-c CFG_FILE] [-SNUM [-SCHANS]] [-s] [-f] [-t] [-v [-v ... ]
]
dahdi_cfg-h
DESCRIPTIONdahdi_cfg configures DAHDI interface cards from a config file.
You generally need to run it with a valid configurations in order for
DAHDI modules to work properly.
It must be run to configure every DAHDI span. Normally it is run from
the DAHDI init script.
OPTIONS-c CFG_FILE
Use an alternative configuration file instead of /etc/dahdi/sys‐
tem.conf
-C CHANNELS
Only apply changes to channels in the specified range. Only
applicable when -S is in use.
-s
Only shutdown spans.
-S SPAN
Only apply changes to span no. SPAN. For a digital span (with a
'span=' line in the configuration file) this will do. For an
analog span you'll have to explicitly tell dahdi_cfg the range
of channels, using -C .
-f
Always configure every channel, even if it appears not to have
changed.
-t
Test mode. Don't do anything, just report what you wanted to do.
-v
Be more verbose. Add extra v-s for extra verbosity.
-h
Display a brief help message.
FILES
/etc/dahdi/system.conf
The default location for the configuration file.
SEE ALSOdahdi_tool(8), dahdi_monitor(8), asterisk(8).
AUTHOR
This manual page was written by Santiago Ruano Rincón <santiago@uni‐
cauca.edu.co> for the Debian system (but may be used by others). Per‐
mission is granted to copy, distribute and/or modify this document
under the terms of the GNU General Public License, Version 2 any later
version published by the Free Software Foundation.
16 Jun 2008 DAHDI_CFG(8)