cu man page on GhostBSD

Man page or keyword search:  
man Server   9747 pages
apropos Keyword Search (all sections)
Output format
GhostBSD logo
[printable version]

CU(1)			  BSD General Commands Manual			 CU(1)

NAME
     cu — call UNIX

SYNOPSIS
     cu [-ehot] [-a acu] [-l line] [-s speed | -speed] [phone-number]

DESCRIPTION
     The cu utility establishes a full-duplex connection to another machine,
     giving the appearance of being logged in directly on the remote CPU.  It
     goes without saying that you must have a login on the machine (or equiva‐
     lent) to which you wish to connect.

     The options are as follows:

     -a acu  Set the acu.

     -e	     Use even parity.  If both -e and -o are given, then no parity is
	     used (the default).

     -h	     Echo characters locally (half-duplex mode).

     -l line
	     Specify the line to use.  Either of the forms like cuad0 or
	     /dev/cuad0 are permitted.

     -o	     Use odd parity.  If both -e and -o are given, then no parity is
	     used (the default).

     -s speed | -speed
	     Set the speed of the connection.  The default is 9600.

     -t	     Connect via a hard-wired connection to a host on a dial-up line.

     Typed characters are normally transmitted directly to the remote machine
     (which does the echoing as well).	A tilde (‘~’) appearing as the first
     character of a line is an escape signal; the following are recognized:

     ~^D or ~.
	     Drop the connection and exit.  Only the connection is dropped –
	     the login session is not terminated.

     ~c [name]
	     Change directory to name (no argument implies change to home
	     directory).

     ~!	     Escape to a shell (exiting the shell will return to cu).

     ~>	     Copy file from local to remote.  The cu utility prompts for the
	     name of a local file to transmit.

     ~<	     Copy file from remote to local.  The cu utility prompts first for
	     the name of the file to be sent, then for a command to be exe‐
	     cuted on the remote machine.

     ~p from [to]
	     Send a file to a remote UNIX host.	 This command causes the
	     remote UNIX system to run the following command string, sending
	     it the from file:

		   stty -echo; cat > 'to'; stty echo

	     If the to file is not specified, the from file name is used.
	     This command is actually a UNIX specific version of the ~> com‐
	     mand.

     ~t from [to]
	     Take a file from a remote UNIX host.  As in the ~p command, the
	     to file defaults to the from file name if it is not specified.
	     The remote host executes the following command string to send the
	     file to cu:

		   cat 'from'; echo '' | tr '\012' '\01'

     ~|	     Pipe the output from a remote command to a local UNIX process.
	     The command string sent to the local UNIX system is processed by
	     the shell.

     ~$	     Pipe the output from a local UNIX process to the remote host.
	     The command string sent to the local UNIX system is processed by
	     the shell.

     ~C	     Fork a child process on the local system to perform special pro‐
	     tocols such as XMODEM.  The child program will be run with the
	     following arrangement of file descriptors:

		   0 <-> remote tty in
		   1 <-> remote tty out
		   2 <-> local tty stderr

     ~#	     Send a BREAK to the remote system.	 For systems which do not sup‐
	     port the necessary ioctl() call, the break is simulated by a
	     sequence of line speed changes and DEL characters.

     ~s	     Set a variable (see the discussion below).

     ~v	     List all variables and their values (if set).

     ~^Z     Stop cu (only available with job control).

     ~^Y     Stop only the “local side” of cu (only available with job con‐
	     trol); the “remote side” of cu, the side that displays output
	     from the remote host, is left running.

     ~?	     Get a summary of the tilde escapes.

     When cu prompts for an argument, for example during setup of a file
     transfer, the line typed may be edited with the standard erase and kill
     characters.  A null line in response to a prompt, or an interrupt, will
     abort the dialogue and return the user to the remote machine.

     The cu utility guards against multiple users connecting to a remote sys‐
     tem by opening modems and terminal lines with exclusive access, and by
     honoring the locking protocol used by uucico(8) (ports/net/freebsd-uucp).

     During file transfers cu provides a running count of the number of lines
     transferred.  When using the ~> and ~< commands, the eofread and eofwrite
     variables are used to recognize end-of-file when reading, and specify
     end-of-file when writing (see below).  File transfers normally depend on
     hardwareflow or tandem mode for flow control.  If the remote system does
     not support hardwareflow or tandem mode, echocheck may be set to indicate
     that cu should synchronize with the remote system on the echo of each
     transmitted character.

     When cu must dial a phone number to connect to a system, it will print
     various messages indicating its actions.  The cu utility supports a vari‐
     ety of auto-call units and modems with the at capability in system
     descriptions.

     Support for Ventel 212+ (ventel), Hayes AT-style (hayes), USRobotics
     Courier (courier), Telebit T3000 (t3000) and Racal-Vadic 831 (vadic)
     units is enabled by default.

     Support for Bizcomp 1031[fw] (biz31[fw]), Bizcomp 1022[fw] (biz22[fw]),
     DEC DF0[23]-AC (df0[23]), DEC DN-11 (dn11) and Racal-Vadic 3451 (v3451)
     units can be added by recompiling cu with the appropriate defines.

     Note that if support for both the Racal-Vadic 831 and 3451 is enabled,
     they are referred to as the v831 and v3451, respectively.	If only one of
     the two is supported, it is referred to as vadic.

   Variables
     The cu utility maintains a set of variables which control its operation.
     Some of these variables are read-only to normal users (root is allowed to
     change anything of interest).  Variables may be displayed and set through
     the ~s escape.  The syntax for variables is patterned after vi(1) and
     Mail(1).  Supplying “all” as an argument to the set command displays all
     variables readable by the user.  Alternatively, the user may request dis‐
     play of a particular variable by attaching a ‘?’ to the end.  For exam‐
     ple, “escape?” displays the current escape character.

     Variables are numeric, string, character, or boolean values.  Boolean
     variables are set merely by specifying their name; they may be reset by
     prepending a ‘!’ to the name.  Other variable types are set by concate‐
     nating an ‘=’ and the value.  The entire assignment must not have any
     blanks in it.  A single set command may be used to interrogate as well as
     set a number of variables.	 Certain common variables have abbreviations.
     The following is a list of common variables, their abbreviations, and
     their default values:

     baudrate
	     (num) The baud rate at which the connection was established;
	     abbreviated ba.

     beautify
	     (bool) Discard unprintable characters when a session is being
	     scripted; abbreviated be.

     dialtimeout
	     (num) When dialing a phone number, the time (in seconds) to wait
	     for a connection to be established; abbreviated dial.

     echocheck
	     (bool) Synchronize with the remote host during file transfer by
	     waiting for the echo of the last character transmitted; default
	     is off.

     eofread
	     (str) The set of characters which signify an end-of-transmission
	     during a ~< file transfer command; abbreviated eofr.

     eofwrite
	     (str) The string sent to indicate end-of-transmission during a ~>
	     file transfer command; abbreviated eofw.

     eol     (str) The set of characters which indicate an end-of-line.	 The
	     cu utility will recognize escape characters only after an end-of-
	     line.

     escape  (char) The command prefix (escape) character; abbreviated es;
	     default value is ‘~’.

     exceptions
	     (str) The set of characters which should not be discarded due to
	     the beautification switch; abbreviated ex; default value is
	     “\t\n\f\b”.

     force   (char) The character used to force literal data transmission;
	     abbreviated fo; default value is ‘^P’.

     framesize
	     (num) The amount of data (in bytes) to buffer between file system
	     writes when receiving files; abbreviated fr.

     hardwareflow
	     (bool) Whether hardware flow control (CRTSCTS) is enabled for the
	     connection; abbreviated hf; default value is off.

     host    (str) The name of the host to which you are connected; abbrevi‐
	     ated ho.

     linedisc
	     (num) The line discipline to use; abbreviated ld.

     prompt  (char) The character which indicates an end-of-line on the remote
	     host; abbreviated pr; default value is ‘\n’.  This value is used
	     to synchronize during data transfers.  The count of lines trans‐
	     ferred during a file transfer command is based on receipt of this
	     character.

     raise   (bool) Upper case mapping mode; abbreviated ra; default value is
	     off.  When this mode is enabled, all lowercase letters will be
	     mapped to uppercase by cu for transmission to the remote machine.

     raisechar
	     (char) The input character used to toggle uppercase mapping mode;
	     abbreviated rc; not set by default.

     record  (str) The name of the file in which a session script is recorded;
	     abbreviated rec.

     script  (bool) Session scripting mode; abbreviated sc; default is off.
	     When script is true, cu will record everything transmitted by the
	     remote machine in the script record file specified in record.  If
	     the beautify switch is on, only printable ASCII characters will
	     be included in the script file (those characters between 040 and
	     0177).  The variable exceptions is used to indicate characters
	     which are an exception to the normal beautification rules.

     tabexpand
	     (bool) Expand tabs to spaces during file transfers; abbreviated
	     tab; default value is false.  Each tab is expanded to 8 spaces.

     tandem  (bool) Use XON/XOFF flow control to throttle data from the remote
	     host; abbreviated ta.  The default value is true.

     verbose
	     (bool) Verbose mode; abbreviated verb; default is true.  When
	     verbose mode is enabled, cu prints messages while dialing, shows
	     the current number of lines transferred during a file transfer
	     operations, and more.

ENVIRONMENT
     HOME    The home directory to use for the ~c command.

     SHELL   The name of the shell to use for the ~! command; default value is
	     “/bin/sh”.

FILES
     /var/log/aculog	     line access log
     /var/spool/lock/LCK..*  lock file to avoid conflicts with uucp(1)
			     (ports/net/freebsd-uucp)

SEE ALSO
     tip(1)

HISTORY
     The cu command appeared in 4.2BSD.

BUGS
     The full set of variables is undocumented and should, probably, be pared
     down.

BSD			       September 1, 2006			   BSD
[top]

List of man pages available for GhostBSD

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net