ctrmm(3P) Sun Performance Library ctrmm(3P)NAMEctrmm - perform one of the matrix-matrix operations B := alpha*op( A
)*B, or B := alpha*B*op( A ) where alpha is a scalar, B is an m by n
matrix, A is a unit, or non-unit, upper or lower triangular matrix and
op( A ) is one of op( A ) = A or op( A ) = A' or op( A ) = conjg( A'
)
SYNOPSIS
SUBROUTINE CTRMM(SIDE, UPLO, TRANSA, DIAG, M, N, ALPHA, A, LDA, B,
LDB)
CHARACTER * 1 SIDE, UPLO, TRANSA, DIAG
COMPLEX ALPHA
COMPLEX A(LDA,*), B(LDB,*)
INTEGER M, N, LDA, LDB
SUBROUTINE CTRMM_64(SIDE, UPLO, TRANSA, DIAG, M, N, ALPHA, A, LDA, B,
LDB)
CHARACTER * 1 SIDE, UPLO, TRANSA, DIAG
COMPLEX ALPHA
COMPLEX A(LDA,*), B(LDB,*)
INTEGER*8 M, N, LDA, LDB
F95 INTERFACE
SUBROUTINE TRMM(SIDE, UPLO, [TRANSA], DIAG, [M], [N], ALPHA, A, [LDA],
B, [LDB])
CHARACTER(LEN=1) :: SIDE, UPLO, TRANSA, DIAG
COMPLEX :: ALPHA
COMPLEX, DIMENSION(:,:) :: A, B
INTEGER :: M, N, LDA, LDB
SUBROUTINE TRMM_64(SIDE, UPLO, [TRANSA], DIAG, [M], [N], ALPHA, A,
[LDA], B, [LDB])
CHARACTER(LEN=1) :: SIDE, UPLO, TRANSA, DIAG
COMPLEX :: ALPHA
COMPLEX, DIMENSION(:,:) :: A, B
INTEGER(8) :: M, N, LDA, LDB
C INTERFACE
#include <sunperf.h>
void ctrmm(char side, char uplo, char transa, char diag, int m, int n,
complex *alpha, complex *a, int lda, complex *b, int ldb);
void ctrmm_64(char side, char uplo, char transa, char diag, long m,
long n, complex *alpha, complex *a, long lda, complex *b,
long ldb);
PURPOSEctrmm performs one of the matrix-matrix operations B := alpha*op( A
)*B, or B := alpha*B*op( A ) where alpha is a scalar, B is an m by n
matrix, A is a unit, or non-unit, upper or lower triangular matrix and
op( A ) is one of op( A ) = A or op( A ) = A' or op( A ) = conjg( A'
)
ARGUMENTS
SIDE (input)
On entry, SIDE specifies whether op( A ) multiplies B from
the left or right as follows:
SIDE = 'L' or 'l' B := alpha*op( A )*B.
SIDE = 'R' or 'r' B := alpha*B*op( A ).
Unchanged on exit.
UPLO (input)
On entry, UPLO specifies whether the matrix A is an upper or
lower triangular matrix as follows:
UPLO = 'U' or 'u' A is an upper triangular matrix.
UPLO = 'L' or 'l' A is a lower triangular matrix.
Unchanged on exit.
TRANSA (input)
On entry, TRANSA specifies the form of op( A ) to be used in
the matrix multiplication as follows:
TRANSA = 'N' or 'n' op( A ) = A.
TRANSA = 'T' or 't' op( A ) = A'.
TRANSA = 'C' or 'c' op( A ) = conjg( A' ).
Unchanged on exit.
TRANSA is defaulted to 'N' for F95 INTERFACE.
DIAG (input)
On entry, DIAG specifies whether or not A is unit triangular
as follows:
DIAG = 'U' or 'u' A is assumed to be unit triangular.
DIAG = 'N' or 'n' A is not assumed to be unit triangular.
Unchanged on exit.
M (input)
On entry, M specifies the number of rows of B. M >= 0.
Unchanged on exit.
N (input)
On entry, N specifies the number of columns of B. N >= 0.
Unchanged on exit.
ALPHA (input)
On entry, ALPHA specifies the scalar alpha. When alpha is
zero then A is not referenced and B need not be set before
entry. Unchanged on exit.
A (input)
COMPLEX array of DIMENSION ( LDA, k ), where k is m when
SIDE = 'L' or 'l' and is n when SIDE = 'R' or 'r'.
Before entry with UPLO = 'U' or 'u', the leading k by k
upper triangular part of the array A must contain the upper
triangular matrix and the strictly lower triangular part of
A is not referenced.
Before entry with UPLO = 'L' or 'l', the leading k by k
lower triangular part of the array A must contain the lower
triangular matrix and the strictly upper triangular part of
A is not referenced.
Note that when DIAG = 'U' or 'u', the diagonal elements of A
are not referenced either, but are assumed to be unity.
Unchanged on exit.
LDA (input)
On entry, LDA specifies the first dimension of A as declared
in the calling (sub) program. When SIDE = 'L' or 'l' then
LDA >= max(1,M), when SIDE = 'R' or 'r' then LDA >= max(1,N).
Unchanged on exit.
B (input/output)
COMPLEX array of DIMENSION ( LDB, n ). Before entry, the
leading M by N part of the array B must contain the matrix B,
and on exit is overwritten by the transformed matrix.
LDB (input)
On entry, LDB specifies the first dimension of B as declared
in the calling subprogram. LDB must be at least max(1,M).
Unchanged on exit.
6 Mar 2009 ctrmm(3P)
