CSX_PARSE_CISTPL_FUNCE(9F)CSX_PARSE_CISTPL_FUNCE(9F)NAMEcsx_Parse_CISTPL_FUNCE - parse Function Extension tuple
SYNOPSIS
#include <sys/pccard.h>
int32_t csx_Parse_CISTPL_FUNCE(client_handle_t ch, tuple_t *tu,
cistpl_funce_t *cf,
uint32_t fid);
INTERFACE LEVEL
Solaris DDI Specific (Solaris DDI)
PARAMETERS
ch
Client handle returned from csx_RegisterClient(9F).
tu
Pointer to a tuple_t structure (see tuple(9S)) returned by a
call to csx_GetFirstTuple(9F) or csx_GetNextTuple(9F).
cf
Pointer to a cistpl_funce_t structure which contains the parsed
CISTPL_FUNCE tuple information upon return from this function.
fid
The function ID code to which this CISTPL_FUNCE tuple refers.
See csx_Parse_CISTPL_FUNCID(9F).
DESCRIPTION
This function parses the Function Extension tuple, CISTPL_FUNCE, into a
form usable by PC Card drivers.
The CISTPL_FUNCE tuple is used to describe information about a specific
PCCard function. The information provided is determined by the Function
Identification tuple, CISTPL_FUNCID, that is being extended. Each func‐
tion has a defined set of extension tuples.
STRUCTURE MEMBERS
The structure members of cistpl_funce_t are:
uint32_t function; /* type of extended data */
uint32_t subfunction;
union {
struct serial {
uint32_t ua; /* UART in use */
uint32_t uc; /* UART capabilities */
} serial;
struct modem {
uint32_t fc; /* supported flow control methods */
uint32_t cb; /* size of DCE command buffer */
uint32_t eb; /* size of DCE to DCE buffer */
uint32_t tb; /* size of DTE to DCE buffer */
} modem;
struct data_modem {
uint32_t ud; /* highest data rate */
uint32_t ms; /* modulation standards */
uint32_t em; /* err correct proto and
/* non-CCITT modulation */
uint32_t dc; /* data compression protocols */
uint32_t cm; /* command protocols */
uint32_t ex; /* escape mechanisms */
uint32_t dy; /* standardized data encryption */
uint32_t ef; /* miscellaneous end user features */
uint32_t ncd; /* number of country codes */
uchar_t cd[16]; /* CCITT country code */
} data_modem;
struct fax {
uint32_t uf; /* highest data rate in DTE/UART */
uint32_t fm; /* CCITT modulation standards */
uint32_t fy; /* standardized data encryption */
uint32_t fs; /* feature selection */
uint32_t ncf; /* number of country codes */
uchar_t cf[16]; /* CCITT country codes */
} fax;
struct voice {
uint32_t uv; /* highest data rate */
uint32_t nsr;
uint32_t sr[16]; /* voice sampling rates (*100) */
uint32_t nss;
uint32_t ss[16]; /* voice sample sizes (*10) */
uint32_t nsc;
uint32_t sc[16]; /* voice compression methods */
} voice;
struct lan {
uint32_t tech; /* network technology */
uint32_t speed; /* media bit or baud rate */
uint32_t media; /* network media supported */
uint32_t con; /* open/closed connector standard */
uint32_t id_sz; /* length of lan station id */
uchar_t id[16]; /* station ID */
} lan;
} data;
The fields are defined as follows:
function
This field identifies the type of extended information
provided about a function by the CISTPL_FUNCE tuple.
This field is defined as follows:
TPLFE_SUB_SERIAL
Serial port interface
TPLFE_SUB_MODEM_COMMON
Common modem interface
TPLFE_SUB_MODEM_DATA
Data modem services
TPLFE_SUB_MODEM_FAX
Fax modem services
TPLFE_SUB_VOICE
Voice services
TPLFE_CAP_MODEM_DATA
Capabilities of the data modem
interface
TPLFE_CAP_MODEM_FAX
Capabilities of the fax modem
interface
TPLFE_CAP_MODEM_VOICE
Capabilities of the voice
modem interface
TPLFE_CAP_SERIAL_DATA
Serial port interface for data
modem services
TPLFE_CAP_SERIAL_FAX
Serial port interface for fax
modem services
TPLFE_CAP_SERIAL_VOICE
Serial port interface for
voice modem services
subfunction
This is for identifying a sub-category of services pro‐
vided by a function in the CISTPL_FUNCE tuple. The
numeric value of the code is in the range of 1 to 15.
ua
This is the serial port UART identification and is
defined as follows:
TPLFE_UA_8250
Intel 8250
TPLFE_UA_16450
NS 16450
TPLFE_UA_16550
NS 16550
uc
This identifies the serial port UART capabilities and is
defined as follows:
TPLFE_UC_PARITY_SPACE
Space parity supported
TPLFE_UC_PARITY_MARK
Mark parity supported
TPLFE_UC_PARITY_ODD
Odd parity supported
TPLFE_UC_PARITY_EVEN
Even parity supported
TPLFE_UC_CS5
5 bit characters supported
TPLFE_UC_CS6
6 bit characters supported
TPLFE_UC_CS7
7 bit characters supported
TPLFE_UC_CS8
8 bit characters supported
TPLFE_UC_STOP_1
1 stop bit supported
TPLFE_UC_STOP_15
1.5 stop bits supported
TPLFE_UC_STOP_2
2 stop bits supported
fc
This identifies the modem flow control methods and is
defined as follows:
TPLFE_FC_TX_XONOFF
Transmit XON/XOFF
TPLFE_FC_RX_XONOFF
Receiver XON/XOFF
TPLFE_FC_TX_HW
Transmit hardware flow control
(CTS)
TPLFE_FC_RX_HW
Receiver hardware flow control
(RTS)
TPLFE_FC_TRANS
Transparent flow control
ms
This identifies the modem modulation standards and
is defined as follows:
TPLFE_MS_BELL103
300bps
TPLFE_MS_V21
300bps (V.21)
TPLFE_MS_V23
600/1200bps (V.23)
TPLFE_MS_V22AB
1200bps (V.22A V.22B)
TPLFE_MS_BELL212
2400bps (US Bell 212
TPLFE_MS_V22BIS
2400bps (V.22bis)
TPLFE_MS_V26
2400bps leased line (V.26)
TPLFE_MS_V26BIS
2400bps (V.26bis)
TPLFE_MS_V27BIS
4800/2400bps leased line (V.27bis)
TPLFE_MS_V29
9600/7200/4800 leased line (V.29)
TPLFE_MS_V32
Up to 9600bps (V.32)
TPLFE_MS_V32BIS
Up to 14400bps (V.32bis)
TPLFE_MS_VFAST
Up to 28800 V.FAST
em
This identifies modem error correction/detection proto‐
cols and is defined as follows:
TPLFE_EM_MNP
MNP levels 2-4
TPLFE_EM_V42
CCITT LAPM (V.42)
dc
This identifies modem data compression protocols and is
defined as follows:
TPLFE_DC_V42BI
CCITT compression V.42
TPLFE_DC_MNP5
MNP compression (uses MNP 2, 3 or 4)
cm
This identifies modem command protocols and is defined
as follows:
TPLFE_CM_AT1
ANSI/EIA/TIA 602 "Action" commands
TPLFE_CM_AT2
ANSI/EIA/TIA 602 "ACE/DCE IF Params"
TPLFE_CM_AT3
ANSI/EIA/TIA 602 "Ace Parameters"
TPLFE_CM_MNP_AT
MNP specification AT commands
TPLFE_CM_V25BIS
V.25bis calling commands
TPLFE_CM_V25A
V.25bis test procedures
TPLFE_CM_DMCL
DMCL command mode
ex
This identifies the modem escape mechanism and is
defined as follows:
TPLFE_EX_BREAK
BREAK support standardized
TPLFE_EX_PLUS
+++ returns to command mode
TPLFE_EX_UD
User defined escape character
dy
This identifies modem standardized data encryption and
is a reserved field for future use and must be set to 0.
ef
This identifies modem miscellaneous features and is
defined as follows:
TPLFE_EF_CALLERID
Caller ID is supported
fm
This identifies fax modulation standards and is defined
as follows:
TPLFE_FM_V21C2
300bps (V.21-C2)
TPLFE_FM_V27TER
4800/2400bps (V.27ter)
TPLFE_FM_V29
9600/7200/4800 leased line (V.29)
TPLFE_FM_V17
14.4K/12K/9600/7200bps (V.17)
TPLFE_FM_V33
4.4K/12K/9600/7200 leased line (V.33)
fs
This identifies the fax feature selection and is defined
as follows:
TPLFE_FS_T3
Group 2 (T.3) service class
TPLFE_FS_T4
Group 3 (T.4) service class
TPLFE_FS_T6
Group 4 (T.6) service class
TPLFE_FS_ECM
Error Correction Mode
TPLFE_FS_VOICEREQ
Voice requests allowed
TPLFE_FS_POLLING
Polling support
TPLFE_FS_FTP
File transfer support
TPLFE_FS_PASSWORD
Password support
tech
This identifies the LAN technology type and is defined
as follows:
TPLFE_LAN_TECH_ARCNET
Arcnet
TPLFE_LAN_TECH_ETHERNET
Ethernet
TPLFE_LAN_TECH_TOKENRING
Token Ring
TPLFE_LAN_TECH_LOCALTALK
Local Talk
TPLFE_LAN_TECH_FDDI
FDDI/CDDI
TPLFE_LAN_TECH_ATM
ATM
TPLFE_LAN_TECH_WIRELESS
Wireless
media
This identifies the LAN media type and is defined as
follows:
TPLFE_LAN_MEDIA_INHERENT
Generic interface
TPLFE_LAN_MEDIA_UTP
Unshielded twisted pair
TPLFE_LAN_MEDIA_STP
Shielded twisted pair
TPLFE_LAN_MEDIA_THIN_COAX
Thin coax
TPLFE_LAN_MEDIA_THICK_COAX
Thick coax
TPLFE_LAN_MEDIA_FIBER
Fiber
TPLFE_LAN_MEDIA_SSR_902
Spread spectrum radio
902-928 MHz
TPLFE_LAN_MEDIA_SSR_2_4
Spread spectrum radio 2.4
GHz
TPLFE_LAN_MEDIA_SSR_5_4
Spread spectrum radio 5.4
GHz
TPLFE_LAN_MEDIA_DIFFUSE_IR
Diffuse infra red
TPLFE_LAN_MEDIA_PTP_IR
Point to point infra red
RETURN VALUES
CS_SUCCESS
Successful operation.
CS_BAD_HANDLE
Client handle is invalid.
CS_UNKNOWN_TUPLE
Parser does not know how to parse tuple.
CS_NO_CARD
No PC Card in socket.
CS_NO_CIS
No Card Information Structure (CIS) on PC
Card.
CS_UNSUPPORTED_FUNCTION
No PCMCIA hardware installed.
CONTEXT
This function may be called from user or kernel context.
SEE ALSOcsx_GetFirstTuple(9F), csx_GetTupleData(9F), csx_Parse_CISTPL_FUN‐
CID(9F), csx_RegisterClient(9F), csx_ValidateCIS(9F), tuple(9S)
PC Card 95 Standard, PCMCIA/JEIDA
Dec 20, 1996 CSX_PARSE_CISTPL_FUNCE(9F)
