TOKENADM(8) BSD System Manager's Manual TOKENADM(8)NAME
activadm, cryptoadm, snkadm - manage the ActivCard, CRYPTOCard and
SNK-004 token databases
SYNOPSIS
tokenadm [-1BDERT] [-d] [-e] [-m [-]mode] [-r] [user [...]]
DESCRIPTION
The tokenadm utility is display and edit user entries in the various to-
ken databases. It may also be invoked as one the following: activadm,
cryptoadm, or snkadm. The flags available are:
-1 Display users, one per line.
-B Display users with no banner.
-D Display disabled users.
-E Display enabled users.
-R Display users in reverse order.
-T Display users in terse format (only the user names). Unless -1
is also specified, four users will be displayed per line.
-d Disable users without removing them from the database. This pre-
vents the users from authenticating, but does not loose their
shared secret. The -m flag may also be used with the -d flag.
-e Enable users. This should be used to re-enable users who were
disabled by the -m flag may also be used with the -e flag option.
-m Add [or remove] the specified mode of authentication for the us-
er. Modes available are decimal (dec), hexadecimal (hex) and
phonebook (phone) and reduced-input (rim). Not all modes are
available for all types of cards. The -m flag may be used alone
or in conjunction with either the -de flags. When ever reduced-
input mode is set the reduced-input state is reset. This should
be done if a paper copy of challenge/responses had been produced
and then misplaced.
-r Remove users from the database.
Use of any of the -1BDERT flags precludes the use of any of the -demr
flags. The -demr flags all require at least one user argument.
SEE ALSOx99token(1), login.conf(5), login_token(8), tokeninit(8),
BSD/OS August 23, 1996 1
