collectd.conf man page on Fedora

collectd.conf man page on Fedora

Man page or keyword search:
man Server 31170 pages
apropos Keyword Search (all sections)
Output format

[printable version]

COLLECTD.CONF(5) collectd COLLECTD.CONF(5)

NAME
collectd.conf - Configuration for the system statistics collection
daemon collectd

SYNOPSIS
BaseDir "/path/to/data/"
PIDFile "/path/to/pidfile/collectd.pid"
Server "123.123.123.123" 12345

LoadPlugin cpu
LoadPlugin load
LoadPlugin ping

<Plugin ping>
Host "example.org"
Host "provider.net"
</Plugin>

DESCRIPTION
This config file controls how the system statistics collection daemon
collectd behaves. The most significant option is LoadPlugin, which
controls which plugins to load. These plugins ultimately define
collectd's behavior.

The syntax of this config file is similar to the config file of the
famous Apache Webserver. Each line contains either a key-value-pair or
a section-start or -end. Empty lines and everything after the hash-
symbol `#' is ignored. Values are either string, enclosed in double-
quotes, (floating-point-)numbers or a boolean expression, i. e. either
true or false. String containing of only alphanumeric characters and
underscores do not need to be quoted. Lines may be wrapped by using `\'
as the last character before the newline. This allows long lines to be
split into multiple lines. Quoted strings may be wrapped as well.
However, those are treated special in that whitespace at the beginning
of the following lines will be ignored, which allows for nicely
indenting the wrapped lines.

The configuration is read and processed in order, i. e. from top to
bottom. So the plugins are loaded in the order listed in this config
file. It is a good idea to load any logging plugins first in order to
catch messages from plugins during configuration. Also, the
"LoadPlugin" option must occur before the "<Plugin ...>" block.

GLOBAL OPTIONS
BaseDir Directory
Sets the base directory. This is the directory beneath all RRD-
files are created. Possibly more subdirectories are created. This
is also the working directory for the daemon.

LoadPlugin Plugin
Loads the plugin Plugin. There must be at least one such line or
collectd will be mostly useless.

Starting with collectd 4.9, this may also be a block in which
further options affecting the behavior of LoadPlugin may be
specified. The following options are allowed inside a LoadPlugin
block:

<LoadPlugin perl>
Globals true
</LoadPlugin>

Globals true|false
If enabled, collectd will export all global symbols of the
plugin (and of all libraries loaded as dependencies of the
plugin) and, thus, makes those symbols available for resolving
unresolved symbols in subsequently loaded plugins if that is
supported by your system. By default, this is disabled.

This is useful (or possibly even required), e. g., when loading
a plugin that embeds some scripting language into the daemon
(e. g. the "perl" or "python" plugins). Scripting languages
usually provide means to load extensions written in C. Those
extensions require symbols provided by the interpreter, which
is loaded as a dependency of the respective collectd plugin.
See the documentation of those plugins (e. g., collectd-perl(5)
or collectd-python(5)) for details.

Include Path
If Path points to a file, includes that file. If Path points to a
directory, recursively includes all files within that directory and
its subdirectories. If the "wordexp" function is available on your
system, shell-like wildcards are expanded before files are
included. This means you can use statements like the following:

Include "/etc/collectd.d/*.conf"

If more than one files are included by a single Include option, the
files will be included in lexicographical order (as defined by the
"strcmp" function). Thus, you can e. g. use numbered prefixes to
specify the order in which the files are loaded.

To prevent loops and shooting yourself in the foot in interesting
ways the nesting is limited to a depth of 8 levels, which should be
sufficient for most uses. Since symlinks are followed it is still
possible to crash the daemon by looping symlinks. In our opinion
significant stupidity should result in an appropriate amount of
pain.

It is no problem to have a block like "<Plugin foo>" in more than
one file, but you cannot include files from within blocks.

PIDFile File
Sets where to write the PID file to. This file is overwritten when
it exists and deleted when the program is stopped. Some init-
scripts might override this setting using the -P command-line
option.

PluginDir Directory
Path to the plugins (shared objects) of collectd.

TypesDB File [File ...]
Set one or more files that contain the data-set descriptions. See
types.db(5) for a description of the format of this file.

Interval Seconds
Configures the interval in which to query the read plugins.
Obviously smaller values lead to a higher system load produced by
collectd, while higher values lead to more coarse statistics.

Warning: You should set this once and then never touch it again. If
you do, you will have to delete all your RRD files or know some
serious RRDtool magic! (Assuming you're using the RRDtool or
RRDCacheD plugin.)

Timeout Iterations
Consider a value list "missing" when no update has been read or
received for Iterations iterations. By default, collectd considers
a value list missing when no update has been received for twice the
update interval. Since this setting uses iterations, the maximum
allowed time without update depends on the Interval information
contained in each value list. This is used in the Threshold
configuration to dispatch notifications about missing values, see
"THRESHOLD CONFIGURATION" below.

ReadThreads Num
Number of threads to start for reading plugins. The default value
is 5, but you may want to increase this if you have more than five
plugins that take a long time to read. Mostly those are plugin that
do network-IO. Setting this to a value higher than the number of
plugins you've loaded is totally useless.

Hostname Name
Sets the hostname that identifies a host. If you omit this setting,
the hostname will be determined using the gethostname(2) system
call.

FQDNLookup true|false
If Hostname is determined automatically this setting controls
whether or not the daemon should try to figure out the "fully
qualified domain name", FQDN. This is done using a lookup of the
name returned by "gethostname".

Using this feature (i. e. setting this option to true) is
recommended. However, to preserve backwards compatibility the
default is set to false. The sample config file that is installed
with "make install" includes a line which sets this option, though,
so that default installations will have this setting enabled.

PreCacheChain ChainName
PostCacheChain ChainName
Configure the name of the "pre-cache chain" and the "post-cache
chain". Please see "FILTER CONFIGURATION" below on information on
chains and how these setting change the daemon's behavior.

PLUGIN OPTIONS
Some plugins may register own options. These options must be enclosed
in a "Plugin"-Section. Which options exist depends on the plugin used.
Some plugins require external configuration, too. The "apache plugin",
for example, required "mod_status" to be configured in the webserver
you're going to collect data from. These plugins are listed below as
well, even if they don't require any configuration within collectd's
configfile.

A list of all plugins and a short summary for each plugin can be found
in the README file shipped with the sourcecode and hopefully binary
packets as well.

Plugin "apache"
To configure the "apache"-plugin you first need to configure the Apache
webserver correctly. The Apache-plugin "mod_status" needs to be loaded
and working and the "ExtendedStatus" directive needs to be enabled. You
can use the following snipped to base your Apache config upon:

ExtendedStatus on
<IfModule mod_status.c>
<Location /mod_status>
SetHandler server-status
</Location>
</IfModule>

Since its "mod_status" module is very similar to Apache's, lighttpd is
also supported. It introduces a new field, called "BusyServers", to
count the number of currently connected clients. This field is also
supported.

The following options are accepted by the "apache"-plugin:

URL http://host/mod_status?auto
Sets the URL of the "mod_status" output. This needs to be the
output generated by "ExtendedStatus on" and it needs to be the
machine readable output generated by appending the "?auto"
argument.

User Username
Optional user name needed for authentication.

Password Password
Optional password needed for authentication.

VerifyPeer true|false
Enable or disable peer SSL certificate verification. See
<http://curl.haxx.se/docs/sslcerts.html> for details. Enabled by
default.

VerifyHost true|false
Enable or disable peer host name verification. If enabled, the
plugin checks if the "Common Name" or a "Subject Alternate Name"
field of the SSL certificate matches the host name provided by the
URL option. If this identity check fails, the connection is
aborted. Obviously, only works when connecting to a SSL enabled
server. Enabled by default.

CACert File
File that holds one or more SSL certificates. If you want to use
HTTPS you will possibly need this option. What CA certificates come
bundled with "libcurl" and are checked by default depends on the
distribution you use.

Plugin "apcups"
Host Hostname
Hostname of the host running apcupsd. Defaults to localhost. Please
note that IPv6 support has been disabled unless someone can confirm
or decline that apcupsd can handle it.

Port Port
TCP-Port to connect to. Defaults to 3551.

Plugin "ascent"
This plugin collects information about an Ascent server, a free server
for the "World of Warcraft" game. This plugin gathers the information
by fetching the XML status page using "libcurl" and parses it using
"libxml2".

The configuration options are the same as for the "apache" plugin
above:

URL http://localhost/ascent/status/
Sets the URL of the XML status output.

User Username
Optional user name needed for authentication.

Password Password
Optional password needed for authentication.

VerifyPeer true|false
Enable or disable peer SSL certificate verification. See
<http://curl.haxx.se/docs/sslcerts.html> for details. Enabled by
default.

Plugin "bind"
Starting with BIND 9.5.0, the most widely used DNS server software
provides extensive statistics about queries, responses and lots of
other information. The bind plugin retrieves this information that's
encoded in XML and provided via HTTP and submits the values to
collectd.

To use this plugin, you first need to tell BIND to make this
information available. This is done with the "statistics-channels"
configuration option:

statistics-channels {
inet localhost port 8053;
};

The configuration follows the grouping that can be seen when looking at
the data with an XSLT compatible viewer, such as a modern web browser.
It's probably a good idea to make yourself familiar with the provided
values, so you can understand what the collected statistics actually
mean.

Synopsis:

<Plugin "bind">
URL "http://localhost:8053/"
OpCodes true
QTypes true

ServerStats true
ZoneMaintStats true
ResolverStats false
MemoryStats true

<View "_default">
QTypes true
ResolverStats true
CacheRRSets true

Zone "127.in-addr.arpa/IN"
</View>
</Plugin>

The bind plugin accepts the following configuration options:

URL URL
URL from which to retrieve the XML data. If not specified,
"http://localhost:8053/" will be used.

OpCodes true|false
When enabled, statistics about the "OpCodes", for example the
number of "QUERY" packets, are collected.

Default: Enabled.

QTypes true|false
When enabled, the number of incoming queries by query types (for
example "A", "MX", "AAAA") is collected.

Default: Enabled.

ServerStats true|false
Collect global server statistics, such as requests received over
IPv4 and IPv6, successful queries, and failed updates.

Default: Enabled.

ZoneMaintStats true|false
Collect zone maintenance statistics, mostly information about
notifications (zone updates) and zone transfers.

Default: Enabled.

ResolverStats true|false
Collect resolver statistics, i. e. statistics about outgoing
requests (e. g. queries over IPv4, lame servers). Since the global
resolver counters apparently were removed in BIND 9.5.1 and 9.6.0,
this is disabled by default. Use the ResolverStats option within a
View "_default" block instead for the same functionality.

Default: Disabled.

MemoryStats
Collect global memory statistics.

Default: Enabled.

View Name
Collect statistics about a specific "view". BIND can behave
different, mostly depending on the source IP-address of the
request. These different configurations are called "views". If you
don't use this feature, you most likely are only interested in the
"_default" view.

Within a <View name> block, you can specify which information you
want to collect about a view. If no View block is configured, no
detailed view statistics will be collected.

QTypes true|false
If enabled, the number of outgoing queries by query type (e. g.
"A", "MX") is collected.

Default: Enabled.

ResolverStats true|false
Collect resolver statistics, i. e. statistics about outgoing
requests (e. g. queries over IPv4, lame servers).

Default: Enabled.

CacheRRSets true|false
If enabled, the number of entries ("RR sets") in the view's
cache by query type is collected. Negative entries (queries
which resulted in an error, for example names that do not
exist) are reported with a leading exclamation mark, e. g.
"!A".

Default: Enabled.

Zone Name
When given, collect detailed information about the given zone
in the view. The information collected if very similar to the
global ServerStats information (see above).

You can repeat this option to collect detailed information
about multiple zones.

By default no detailed zone information is collected.

Plugin "cpufreq"
This plugin doesn't have any options. It reads
/sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq (for the first
CPU installed) to get the current CPU frequency. If this file does not
exist make sure cpufreqd (<http://cpufreqd.sourceforge.net/>) or a
similar tool is installed and an "cpu governor" (that's a kernel
module) is loaded.

Plugin "csv"
DataDir Directory
Set the directory to store CSV-files under. Per default CSV-files
are generated beneath the daemon's working directory, i. e. the
BaseDir. The special strings stdout and stderr can be used to
write to the standard output and standard error channels,
respectively. This, of course, only makes much sense when collectd
is running in foreground- or non-daemon-mode.

StoreRates true|false
If set to true, convert counter values to rates. If set to false
(the default) counter values are stored as is, i. e. as an
increasing integer number.

Plugin "curl"
The curl plugin uses the libcurl (<http://curl.haxx.se/>) to read web
pages and the match infrastructure (the same code used by the tail
plugin) to use regular expressions with the received data.

The following example will read the current value of AMD stock from
Google's finance page and dispatch the value to collectd.

<Plugin curl>
<Page "stock_quotes">
URL "http://finance.google.com/finance?q=NYSE%3AAMD"
User "foo"
Password "bar"
<Match>
Regex "<span +class=\"pr\"[^>]*> *([0-9]*\\.[0-9]+) *</span>"
DSType "GaugeAverage"
# Note: `stock_value' is not a standard type.
Type "stock_value"
Instance "AMD"
</Match>
</Page>
</Plugin>

In the Plugin block, there may be one or more Page blocks, each
defining a web page and one or more "matches" to be performed on the
returned data. The string argument to the Page block is used as plugin
instance.

The following options are valid within Page blocks:

URL URL
URL of the web site to retrieve. Since a regular expression will be
used to extract information from this data, non-binary data is a
big plus here ;)

User Name
Username to use if authorization is required to read the page.

Password Password
Password to use if authorization is required to read the page.

VerifyPeer true|false
Enable or disable peer SSL certificate verification. See
<http://curl.haxx.se/docs/sslcerts.html> for details. Enabled by
default.

CACert file
File that holds one or more SSL certificates. If you want to use
HTTPS you will possibly need this option. What CA certificates come
bundled with "libcurl" and are checked by default depends on the
distribution you use.

MeasureResponseTime true|false
Measure response time for the request. If this setting is enabled,
Match blocks (see below) are optional. Disabled by default.

<Match>
One or more Match blocks that define how to match information in
the data returned by "libcurl". The "curl" plugin uses the same
infrastructure that's used by the "tail" plugin, so please see the
documentation of the "tail" plugin below on how matches are
defined. If the MeasureResponseTime option is set to true, Match
blocks are optional.

Plugin "curl_json"
The curl_json plugin uses libcurl (<http://curl.haxx.se/>) and libyajl
(<http://www.lloydforge.org/projects/yajl/>) to retrieve JSON data via
cURL. This can be used to collect values from CouchDB documents (which
are stored JSON notation), for example.

The following example will collect several values from the built-in
`_stats' runtime statistics module of CouchDB
(<http://wiki.apache.org/couchdb/Runtime_Statistics>).

<Plugin curl_json>
<URL "http://localhost:5984/_stats">
Instance "httpd"
<Key "httpd/requests/count">
Type "http_requests"
</Key>

<Key "httpd_request_methods/*/count">
Type "http_request_methods"
</Key>

<Key "httpd_status_codes/*/count">
Type "http_response_codes"
</Key>
</URL>
</Plugin>

Another CouchDB example: The following example will collect the status
values from each database:

<URL "http://localhost:5984/_all_dbs">
Instance "dbs"
<Key "*/doc_count">
Type "gauge"
</Key>
<Key "*/doc_del_count">
Type "counter"
</Key>
<Key "*/disk_size">
Type "bytes"
</Key>
</URL>

In the Plugin block, there may be one or more URL blocks, each defining
a URL to be fetched via HTTP (using libcurl) and one or more Key
blocks. The Key string argument must be in a path format, which is
used to collect a value from a JSON map object. If a path element of
Key is the * wildcard, the values for all keys will be collectd.

The following options are valid within URL blocks:

Instance Instance
Sets the plugin instance to Instance.

User Name
Username to use if authorization is required to read the page.

Password Password
Password to use if authorization is required to read the page.

VerifyPeer true|false
Enable or disable peer SSL certificate verification. See
<http://curl.haxx.se/docs/sslcerts.html> for details. Enabled by
default.

The following options are valid within Key blocks:

Type Type
Sets the type used to dispatch the values to the daemon. Detailed
information about types and their configuration can be found in
types.db(5). This option is mandatory.

Instance Instance
Type-instance to use. Defaults to the current map key or current
string array element value.

Plugin "curl_xml"
The curl_xml plugin uses libcurl (<http://curl.haxx.se/>) and libxml2
(<http://xmlsoft.org/>) to retrieve XML data via cURL.

<Plugin "curl_xml">
<URL "http://localhost/stats.xml">
Host "my_host"
Instance "some_instance"
User "collectd"
Password "thaiNg0I"
VerifyPeer true
VerifyHost true
CACert "/path/to/ca.crt"

<XPath "table[@id=\"magic_level\"]/tr">
Type "magic_level"
#InstancePrefix "prefix-"
InstanceFrom "td[1]"
ValuesFrom "td[2]/span[@class=\"level\"]"
</XPath>
</URL>
</Plugin>

In the Plugin block, there may be one or more URL blocks, each defining
a URL to be fetched via HTTP (using libcurl). Within each URL block
there are options which specify the connection parameters, for example
authentication information, and one or more XPath blocks.

Each XPath block specifies how to get one type of information. The
string argument must be a valid XPath expression which returns a list
of "base elements". One value is dispatched for each "base element".
The type instance and values are looked up using further XPath
expressions that should be relative to the base element.

Within the URL block the following options are accepted:

Host Name
Use Name as the host name when submitting values. Defaults to the
global host name setting.

Instance Instance
Use Instance as the plugin instance when submitting values.
Defaults to an empty string (no plugin instance).

User User =item Password Password =item VerifyPeer true|false =item
VerifyHost true|false =item CACert CA Cert File
These options behave exactly equivalent to the appropriate options
of the cURL and cURL-JSON plugins. Please see there for a detailed
description.

<XPath XPath-expression>
Within each URL block, there must be one or more XPath blocks. Each
XPath block specifies how to get one type of information. The
string argument must be a valid XPath expression which returns a
list of "base elements". One value is dispatched for each "base
element".

Within the XPath block the following options are accepted:

Type Type
Specifies the Type used for submitting patches. This determines
the number of values that are required / expected and whether
the strings are parsed as signed or unsigned integer or as
double values. See types.db(5) for details. This option is
required.

InstancePrefix InstancePrefix
Prefix the type instance with InstancePrefix. The values are
simply concatenated together without any separator. This
option is optional.

InstanceFrom InstanceFrom
Specifies a XPath expression to use for determining the type
instance. The XPath expression must return exactly one element.
The element's value is then used as type instance, possibly
prefixed with InstancePrefix (see above).

This value is required. As a special exception, if the "base
XPath expression" (the argument to the XPath block) returns
exactly one argument, then this option may be omitted.

ValuesFrom ValuesFrom [ValuesFrom ...]
Specifies one or more XPath expression to use for reading the
values. The number of XPath expressions must match the number
of data sources in the type specified with Type (see above).
Each XPath expression must return exactly one element. The
element's value is then parsed as a number and used as value
for the appropriate value in the value list dispatched to the
daemon.

Plugin "dbi"
This plugin uses the dbi library (<http://libdbi.sourceforge.net/>) to
connect to various databases, execute SQL statements and read back the
results. dbi is an acronym for "database interface" in case you were
wondering about the name. You can configure how each column is to be
interpreted and the plugin will generate one or more data sets from
each row returned according to these rules.

Because the plugin is very generic, the configuration is a little more
complex than those of other plugins. It usually looks something like
this:

<Plugin dbi>
<Query "out_of_stock">
Statement "SELECT category, COUNT(*) AS value FROM products WHERE in_stock = 0 GROUP BY category"
# Use with MySQL 5.0.0 or later
MinVersion 50000
<Result>
Type "gauge"
InstancePrefix "out_of_stock"
InstancesFrom "category"
ValuesFrom "value"
</Result>
</Query>
<Database "product_information">
Driver "mysql"
DriverOption "host" "localhost"
DriverOption "username" "collectd"
DriverOption "password" "aZo6daiw"
DriverOption "dbname" "prod_info"
SelectDB "prod_info"
Query "out_of_stock"
</Database>
</Plugin>

The configuration above defines one query with one result and one
database. The query is then linked to the database with the Query
option within the <Database> block. You can have any number of queries
and databases and you can also use the Include statement to split up
the configuration file in multiple, smaller files. However, the <Query>
block must precede the <Database> blocks, because the file is
interpreted from top to bottom!

The following is a complete list of options:

Query blocks

Query blocks define SQL statements and how the returned data should be
interpreted. They are identified by the name that is given in the
opening line of the block. Thus the name needs to be unique. Other than
that, the name is not used in collectd.

In each Query block, there is one or more Result blocks. Result blocks
define which column holds which value or instance information. You can
use multiple Result blocks to create multiple values from one returned
row. This is especially useful, when queries take a long time and
sending almost the same query again and again is not desirable.

Example:

<Query "environment">
Statement "select station, temperature, humidity from environment"
<Result>
Type "temperature"
# InstancePrefix "foo"
InstancesFrom "station"
ValuesFrom "temperature"
</Result>
<Result>
Type "humidity"
InstancesFrom "station"
ValuesFrom "humidity"
</Result>
</Query>

The following options are accepted:

Statement SQL
Sets the statement that should be executed on the server. This is
not interpreted by collectd, but simply passed to the database
server. Therefore, the SQL dialect that's used depends on the
server collectd is connected to.

The query has to return at least two columns, one for the instance
and one value. You cannot omit the instance, even if the statement
is guaranteed to always return exactly one line. In that case, you
can usually specify something like this:

Statement "SELECT \"instance\", COUNT(*) AS value FROM table"

(That works with MySQL but may not be valid SQL according to the
spec. If you use a more strict database server, you may have to
select from a dummy table or something.)

Please note that some databases, for example Oracle, will fail if
you include a semicolon at the end of the statement.

MinVersion Version
MaxVersion Value
Only use this query for the specified database version. You can use
these options to provide multiple queries with the same name but
with a slightly different syntax. The plugin will use only those
queries, where the specified minimum and maximum versions fit the
version of the database in use.

The database version is determined by
"dbi_conn_get_engine_version", see the <libdbi documentation> for
details. Basically, each part of the version is assumed to be in
the range from 00 to 99 and all dots are removed. So version
"4.1.2" becomes "40102", version "5.0.42" becomes "50042".

Warning: The plugin will use all matching queries, so if you
specify multiple queries with the same name and overlapping ranges,
weird stuff will happen. Don't to it! A valid example would be
something along these lines:

MinVersion 40000
MaxVersion 49999
...
MinVersion 50000
MaxVersion 50099
...
MinVersion 50100
# No maximum

In the above example, there are three ranges that don't overlap.
The last one goes from version "5.1.0" to infinity, meaning "all
later versions". Versions before "4.0.0" are not specified.

Type Type
The type that's used for each line returned. See types.db(5) for
more details on how types are defined. In short: A type is a
predefined layout of data and the number of values and type of
values has to match the type definition.

If you specify "temperature" here, you need exactly one gauge
column. If you specify "if_octets", you will need two counter
columns. See the ValuesFrom setting below.

There must be exactly one Type option inside each Result block.

InstancePrefix prefix
Prepends prefix to the type instance. If InstancesFrom (see below)
is not given, the string is simply copied. If InstancesFrom is
given, prefix and all strings returned in the appropriate columns
are concatenated together, separated by dashes ("-").

InstancesFrom column0 [column1 ...]
Specifies the columns whose values will be used to create the
"type-instance" for each row. If you specify more than one column,
the value of all columns will be joined together with dashes ("-")
as separation characters.

The plugin itself does not check whether or not all built instances
are different. It's your responsibility to assure that each is
unique. This is especially true, if you do not specify
InstancesFrom: You have to make sure that only one row is returned
in this case.

If neither InstancePrefix nor InstancesFrom is given, the type-
instance will be empty.

ValuesFrom column0 [column1 ...]
Names the columns whose content is used as the actual data for the
data sets that are dispatched to the daemon. How many such columns
you need is determined by the Type setting above. If you specify
too many or not enough columns, the plugin will complain about that
and no data will be submitted to the daemon.

The actual data type in the columns is not that important. The
plugin will automatically cast the values to the right type if it
know how to do that. So it should be able to handle integer an
floating point types, as well as strings (if they include a number
at the beginning).

There must be at least one ValuesFrom option inside each Result
block.

Database blocks

Database blocks define a connection to a database and which queries
should be sent to that database. Since the used "dbi" library can
handle a wide variety of databases, the configuration is very generic.
If in doubt, refer to libdbi's documentation - we stick as close to the
terminology used there.

Each database needs a "name" as string argument in the starting tag of
the block. This name will be used as "PluginInstance" in the values
submitted to the daemon. Other than that, that name is not used.

Driver Driver
Specifies the driver to use to connect to the database. In many
cases those drivers are named after the database they can connect
to, but this is not a technical necessity. These drivers are
sometimes referred to as "DBD", DataBase Driver, and some
distributions ship them in separate packages. Drivers for the "dbi"
library are developed by the libdbi-drivers project at
<http://libdbi-drivers.sourceforge.net/>.

You need to give the driver name as expected by the "dbi" library
here. You should be able to find that in the documentation for each
driver. If you mistype the driver name, the plugin will dump a list
of all known driver names to the log.

DriverOption Key Value
Sets driver-specific options. What option a driver supports can be
found in the documentation for each driver, somewhere at
<http://libdbi-drivers.sourceforge.net/>. However, the options
"host", "username", "password", and "dbname" seem to be de facto
standards.

Unfortunately, drivers are not too keen to report errors when an
unknown option is passed to them, so invalid settings here may go
unnoticed. This is not the plugin's fault, it will report errors if
it gets them from the library / the driver. If a driver complains
about an option, the plugin will dump a complete list of all
options understood by that driver to the log.

SelectDB Database
In some cases, the database name you connect with is not the
database name you want to use for querying data. If this option is
set, the plugin will "select" (switch to) that database after the
connection is established.

Query QueryName
Associates the query named QueryName with this database connection.
The query needs to be defined before this statement, i. e. all
query blocks you want to refer to must be placed above the database
block you want to refer to them from.

Plugin "df"
Device Device
Select partitions based on the devicename.

MountPoint Directory
Select partitions based on the mountpoint.

FSType FSType
Select partitions based on the filesystem type.

IgnoreSelected true|false
Invert the selection: If set to true, all partitions except the
ones that match any one of the criteria are collected. By default
only selected partitions are collected if a selection is made. If
no selection is configured at all, all partitions are selected.

ReportByDevice true|false
Report using the device name rather than the mountpoint. i.e. with
this false, (the default), it will report a disk as "root", but
with it true, it will be "sda1" (or whichever).

ReportReserved true|false
When enabled, the blocks reserved for root are reported separately.
When disabled (the default for backwards compatibility reasons) the
reserved space will be included in the "free" space.

When disabled, the "df" type will be used to store "free" and
"used" space. The mount point or disk name (see option
ReportByDevice) is used as type instance in this case (again:
backwards compatibility).

When enabled, the type "df_complex" is used and three files are
created. The mount point or disk name is used as plugin instance
and the type instance is set to "free", "reserved" and "used" as
appropriate.

Enabling this option is recommended.

ReportInodes true|false
Enables or disables reporting of free, reserved and used inodes.
Defaults to inode collection being disabled.

Enable this option if inodes are a scarce resource for you, usually
because many small files are stored on the disk. This is a usual
scenario for mail transfer agents and web caches.

Plugin "disk"
The "disk" plugin collects information about the usage of physical
disks and logical disks (partitions). Values collected are the number
of octets written to and read from a disk or partition, the number of
read/write operations issued to the disk and a rather complex "time" it
took for these commands to be issued.

Using the following two options you can ignore some disks or configure
the collection only of specific disks.

Disk Name
Select the disk Name. Whether it is collected or ignored depends on
the IgnoreSelected setting, see below. As with other plugins that
use the daemon's ignorelist functionality, a string that starts and
ends with a slash is interpreted as a regular expression. Examples:

Disk "sdd"
Disk "/hda[34]/"

IgnoreSelected true|false
Sets whether selected disks, i. e. the ones matches by any of the
Disk statements, are ignored or if all other disks are ignored. The
behavior (hopefully) is intuitive: If no Disk option is configured,
all disks are collected. If at least one Disk option is given and
no IgnoreSelected or set to false, only matching disks will be
collected. If IgnoreSelected is set to true, all disks are
collected except the ones matched.

Plugin "dns"
Interface Interface
The dns plugin uses libpcap to capture dns traffic and analyzes it.
This option sets the interface that should be used. If this option
is not set, or set to "any", the plugin will try to get packets
from all interfaces. This may not work on certain platforms, such
as Mac OS X.

IgnoreSource IP-address
Ignore packets that originate from this address.

SelectNumericQueryTypes true|false
Enabled by default, collects unknown (and thus presented as numeric
only) query types.

Plugin "email"
SocketFile Path
Sets the socket-file which is to be created.

SocketGroup Group
If running as root change the group of the UNIX-socket after it has
been created. Defaults to collectd.

SocketPerms Permissions
Change the file permissions of the UNIX-socket after it has been
created. The permissions must be given as a numeric, octal value as
you would pass to chmod(1). Defaults to 0770.

MaxConns Number
Sets the maximum number of connections that can be handled in
parallel. Since this many threads will be started immediately
setting this to a very high value will waste valuable resources.
Defaults to 5 and will be forced to be at most 16384 to prevent
typos and dumb mistakes.

Plugin "exec"
Please make sure to read collectd-exec(5) before using this plugin. It
contains valuable information on when the executable is executed and
the output that is expected from it.

Exec User[:[Group]] Executable [<arg> [<arg> ...]]
NotificationExec User[:[Group]] Executable [<arg> [<arg> ...]]
Execute the executable Executable as user User. If the user name is
followed by a colon and a group name, the effective group is set to
that group. The real group and saved-set group will be set to the
default group of that user. If no group is given the effective
group ID will be the same as the real group ID.

Please note that in order to change the user and/or group the
daemon needs superuser privileges. If the daemon is run as an
unprivileged user you must specify the same user/group here. If the
daemon is run with superuser privileges, you must supply a non-root
user here.

The executable may be followed by optional arguments that are
passed to the program. Please note that due to the configuration
parsing numbers and boolean values may be changed. If you want to
be absolutely sure that something is passed as-is please enclose it
in quotes.

The Exec and NotificationExec statements change the semantics of
the programs executed, i. e. the data passed to them and the
response expected from them. This is documented in great detail in
collectd-exec(5).

Plugin "filecount"
The "filecount" plugin counts the number of files in a certain
directory (and its subdirectories) and their combined size. The
configuration is very straight forward:

<Plugin "filecount">
<Directory "/var/qmail/queue/mess">
Instance "qmail-message"
</Directory>
<Directory "/var/qmail/queue/todo">
Instance "qmail-todo"
</Directory>
<Directory "/var/lib/php5">
Instance "php5-sessions"
Name "sess_*"
</Directory>
</Plugin>

The example above counts the number of files in QMail's queue
directories and the number of PHP5 sessions. Jfiy: The "todo" queue
holds the messages that QMail has not yet looked at, the "message"
queue holds the messages that were classified into "local" and
"remote".

As you can see, the configuration consists of one or more "Directory"
blocks, each of which specifies a directory in which to count the
files. Within those blocks, the following options are recognized:

Instance Instance
Sets the plugin instance to Instance. That instance name must be
unique, but it's your responsibility, the plugin doesn't check for
that. If not given, the instance is set to the directory name with
all slashes replaced by underscores and all leading underscores
removed.

Name Pattern
Only count files that match Pattern, where Pattern is a shell-like
wildcard as understood by fnmatch(3). Only the filename is checked
against the pattern, not the entire path. In case this makes it
easier for you: This option has been named after the -name
parameter to find(1).

MTime Age
Count only files of a specific age: If Age is greater than zero,
only files that haven't been touched in the last Age seconds are
counted. If Age is a negative number, this is inversed. For
example, if -60 is specified, only files that have been modified in
the last minute will be counted.

The number can also be followed by a "multiplier" to easily specify
a larger timespan. When given in this notation, the argument must
in quoted, i. e. must be passed as string. So the -60 could also
be written as "-1m" (one minute). Valid multipliers are "s"
(second), "m" (minute), "h" (hour), "d" (day), "w" (week), and "y"
(year). There is no "month" multiplier. You can also specify
fractional numbers, e. g. "0.5d" is identical to "12h".

Size Size
Count only files of a specific size. When Size is a positive
number, only files that are at least this big are counted. If Size
is a negative number, this is inversed, i. e. only files smaller
than the absolute value of Size are counted.

As with the MTime option, a "multiplier" may be added. For a
detailed description see above. Valid multipliers here are "b"
(byte), "k" (kilobyte), "m" (megabyte), "g" (gigabyte), "t"
(terabyte), and "p" (petabyte). Please note that there are 1000
bytes in a kilobyte, not 1024.

Recursive true|false
Controls whether or not to recurse into subdirectories. Enabled by
default.

IncludeHidden true|false
Controls whether or not to include "hidden" files and directories
in the count. "Hidden" files and directories are those, whose name
begins with a dot. Defaults to false, i.e. by default hidden files
and directories are ignored.

Plugin "GenericJMX"
The GenericJMX plugin is written in Java and therefore documented in
collectd-java(5).

Plugin "gmond"
The gmond plugin received the multicast traffic sent by gmond, the
statistics collection daemon of Ganglia. Mappings for the standard
"metrics" are built-in, custom mappings may be added via Metric blocks,
see below.

Synopsis:

<Plugin "gmond">
MCReceiveFrom "239.2.11.71" "8649"
<Metric "swap_total">
Type "swap"
TypeInstance "total"
DataSource "value"
</Metric>
<Metric "swap_free">
Type "swap"
TypeInstance "free"
DataSource "value"
</Metric>
</Plugin>

The following metrics are built-in:

· load_one, load_five, load_fifteen

· cpu_user, cpu_system, cpu_idle, cpu_nice, cpu_wio

· mem_free, mem_shared, mem_buffers, mem_cached, mem_total

· bytes_in, bytes_out

· pkts_in, pkts_out

Available configuration options:

MCReceiveFrom MCGroup [Port]
Sets sets the multicast group and UDP port to which to subscribe.

Default: 239.2.11.71 / 8649

<Metric Name>
These blocks add a new metric conversion to the internal table.
Name, the string argument to the Metric block, is the metric name
as used by Ganglia.

Type Type
Type to map this metric to. Required.

TypeInstance Instance
Type-instance to use. Optional.

DataSource Name
Data source to map this metric to. If the configured type has
exactly one data source, this is optional. Otherwise the option
is required.

Plugin "hddtemp"
To get values from hddtemp collectd connects to localhost (127.0.0.1),
port 7634/tcp. The Host and Port options can be used to change these
default values, see below. "hddtemp" has to be running to work
correctly. If "hddtemp" is not running timeouts may appear which may
interfere with other statistics..

The hddtemp homepage can be found at
<http://www.guzu.net/linux/hddtemp.php>.

Host Hostname
Hostname to connect to. Defaults to 127.0.0.1.

Port Port
TCP-Port to connect to. Defaults to 7634.

TranslateDevicename true|false
If enabled, translate the disk names to major/minor device numbers
(e. g. "8-0" for /dev/sda). For backwards compatibility this
defaults to true but it's recommended to disable it as it will
probably be removed in the next major version.

Plugin "interface"
Interface Interface
Select this interface. By default these interfaces will then be
collected. For a more detailed description see IgnoreSelected
below.

IgnoreSelected true|false
If no configuration if given, the traffic-plugin will collect data
from all interfaces. This may not be practical, especially for
loopback- and similar interfaces. Thus, you can use the
Interface-option to pick the interfaces you're interested in.
Sometimes, however, it's easier/preferred to collect all interfaces
except a few ones. This option enables you to do that: By setting
IgnoreSelected to true the effect of Interface is inverted: All
selected interfaces are ignored and all other interfaces are
collected.

Plugin "ipmi"
Sensor Sensor
Selects sensors to collect or to ignore, depending on
IgnoreSelected.

IgnoreSelected true|false
If no configuration if given, the ipmi plugin will collect data
from all sensors found of type "temperature", "voltage", "current"
and "fanspeed". This option enables you to do that: By setting
IgnoreSelected to true the effect of Sensor is inverted: All
selected sensors are ignored and all other sensors are collected.

NotifySensorAdd true|false
If a sensor appears after initialization time of a minute a
notification is sent.

NotifySensorRemove true|false
If a sensor disappears a notification is sent.

NotifySensorNotPresent true|false
If you have for example dual power supply and one of them is
(un)plugged then a notification is sent.

Plugin "iptables"
Chain Table Chain [Comment|Number [Name]]
Select the rules to count. If only Table and Chain are given, this
plugin will collect the counters of all rules which have a comment-
match. The comment is then used as type-instance.

If Comment or Number is given, only the rule with the matching
comment or the nth rule will be collected. Again, the comment (or
the number) will be used as the type-instance.

If Name is supplied, it will be used as the type-instance instead
of the comment or the number.

Plugin "irq"
Irq Irq
Select this irq. By default these irqs will then be collected. For
a more detailed description see IgnoreSelected below.

IgnoreSelected true|false
If no configuration if given, the irq-plugin will collect data from
all irqs. This may not be practical, especially if no interrupts
happen. Thus, you can use the Irq-option to pick the interrupt
you're interested in. Sometimes, however, it's easier/preferred to
collect all interrupts except a few ones. This option enables you
to do that: By setting IgnoreSelected to true the effect of Irq is
inverted: All selected interrupts are ignored and all other
interrupts are collected.

Plugin "java"
The Java plugin makes it possible to write extensions for collectd in
Java. This section only discusses the syntax and semantic of the
configuration options. For more in-depth information on the Java
plugin, please read collectd-java(5).

Synopsis:

<Plugin "java">
JVMArg "-verbose:jni"
JVMArg "-Djava.class.path=/opt/collectd/lib/collectd/bindings/java"
LoadPlugin "org.collectd.java.Foobar"
<Plugin "org.collectd.java.Foobar">
# To be parsed by the plugin
</Plugin>
</Plugin>

Available configuration options:

JVMArg Argument
Argument that is to be passed to the Java Virtual Machine (JVM).
This works exactly the way the arguments to the java binary on the
command line work. Execute "java --help" for details.

Please note that all these options must appear before (i. e. above)
any other options! When another option is found, the JVM will be
started and later options will have to be ignored!

LoadPlugin JavaClass
Instantiates a new JavaClass object. The constructor of this object
very likely then registers one or more callback methods with the
server.

See collectd-java(5) for details.

When the first such option is found, the virtual machine (JVM) is
created. This means that all JVMArg options must appear before
(i. e. above) all LoadPlugin options!

Plugin Name
The entire block is passed to the Java plugin as an
org.collectd.api.OConfigItem object.

For this to work, the plugin has to register a configuration
callback first, see "config callback" in collectd-java(5). This
means, that the Plugin block must appear after the appropriate
LoadPlugin block. Also note, that Name depends on the (Java) plugin
registering the callback and is completely independent from the
JavaClass argument passed to LoadPlugin.

Plugin "libvirt"
This plugin allows CPU, disk and network load to be collected for
virtualized guests on the machine. This means that these
characteristics can be collected for guest systems without installing
any software on them - collectd only runs on the hosting system. The
statistics are collected through libvirt (<http://libvirt.org/>).

Only Connection is required.

Connection uri
Connect to the hypervisor given by uri. For example if using Xen
use:

Connection "xen:///"

Details which URIs allowed are given at
<http://libvirt.org/uri.html>.

RefreshInterval seconds
Refresh the list of domains and devices every seconds. The default
is 60 seconds. Setting this to be the same or smaller than the
Interval will cause the list of domains and devices to be refreshed
on every iteration.

Refreshing the devices in particular is quite a costly operation,
so if your virtualization setup is static you might consider
increasing this. If this option is set to 0, refreshing is disabled
completely.

Domain name
BlockDevice name:dev
InterfaceDevice name:dev
IgnoreSelected true|false
Select which domains and devices are collected.

If IgnoreSelected is not given or false then only the listed
domains and disk/network devices are collected.

If IgnoreSelected is true then the test is reversed and the listed
domains and disk/network devices are ignored, while the rest are
collected.

The domain name and device names may use a regular expression, if
the name is surrounded by /.../ and collectd was compiled with
support for regexps.

The default is to collect statistics for all domains and all their
devices.

Example:

BlockDevice "/:hdb/"
IgnoreSelected "true"

Ignore all hdb devices on any domain, but other block devices (eg.
hda) will be collected.

HostnameFormat name|uuid|hostname|...
When the libvirt plugin logs data, it sets the hostname of the
collected data according to this setting. The default is to use the
guest name as provided by the hypervisor, which is equal to setting
name.

uuid means use the guest's UUID. This is useful if you want to
track the same guest across migrations.

hostname means to use the global Hostname setting, which is
probably not useful on its own because all guests will appear to
have the same name.

You can also specify combinations of these fields. For example name
uuid means to concatenate the guest name and UUID (with a literal
colon character between, thus "foo:1234-1234-1234-1234").

Plugin "logfile"
LogLevel debug|info|notice|warning|err
Sets the log-level. If, for example, set to notice, then all events
with severity notice, warning, or err will be written to the
logfile.

Please note that debug is only available if collectd has been
compiled with debugging support.

File File
Sets the file to write log messages to. The special strings stdout
and stderr can be used to write to the standard output and standard
error channels, respectively. This, of course, only makes much
sense when collectd is running in foreground- or non-daemon-mode.

Timestamp true|false
Prefix all lines printed by the current time. Defaults to true.

PrintSeverity true|false
When enabled, all lines are prefixed by the severity of the log
message, for example "warning". Defaults to false.

Note: There is no need to notify the daemon after moving or removing
the log file (e. g. when rotating the logs). The plugin reopens the
file for each line it writes.

Plugin "mbmon"
The "mbmon plugin" uses mbmon to retrieve temperature, voltage, etc.

Be default collectd connects to localhost (127.0.0.1), port 411/tcp.
The Host and Port options can be used to change these values, see
below. "mbmon" has to be running to work correctly. If "mbmon" is not
running timeouts may appear which may interfere with other statistics..

"mbmon" must be run with the -r option ("print TAG and Value format");
Debian's /etc/init.d/mbmon script already does this, other people will
need to ensure that this is the case.

Host Hostname
Hostname to connect to. Defaults to 127.0.0.1.

Port Port
TCP-Port to connect to. Defaults to 411.

Plugin "memcachec"
The "memcachec plugin" connects to a memcached server, queries one or
more given pages and parses the returned data according to user
specification. The matches used are the same as the matches used in
the "curl" and "tail" plugins.

In order to talk to the memcached server, this plugin uses the
libmemcached library. Please note that there is another library with a
very similar name, libmemcache (notice the missing `d'), which is not
applicable.

Synopsis of the configuration:

<Plugin "memcachec">
<Page "plugin_instance">
Server "localhost"
Key "page_key"
<Match>
Regex "(\\d+) bytes sent"
DSType CounterAdd
Type "ipt_octets"
Instance "type_instance"
</Match>
</Page>
</Plugin>

The configuration options are:

<Page Name>
Each Page block defines one page to be queried from the memcached
server. The block requires one string argument which is used as
plugin instance.

Server Address
Sets the server address to connect to when querying the page. Must
be inside a Page block.

Key Key
When connected to the memcached server, asks for the page Key.

<Match>
Match blocks define which strings to look for and how matches
substrings are interpreted. For a description of match blocks,
please see "Plugin tail".

Plugin "memcached"
The "memcached plugin" connects to a memcached server and queries
statistics about cache utilization, memory and bandwidth used.
<http://www.danga.com/memcached/>

Host Hostname
Hostname to connect to. Defaults to 127.0.0.1.

Port Port
TCP-Port to connect to. Defaults to 11211.

Plugin "modbus"
The modbus plugin connects to a Modbus "slave" via Modbus/TCP and reads
register values. It supports reading single registers (unsigned 16 bit
values), large integer values (unsigned 32 bit values) and floating
point values (two registers interpreted as IEEE floats in big endian
notation).

Synopsis:

<Data "voltage-input-1">
RegisterBase 0
RegisterType float
Type voltage
Instance "input-1"
</Data>

<Data "voltage-input-2">
RegisterBase 2
RegisterType float
Type voltage
Instance "input-2"
</Data>

<Host "modbus.example.com">
Address "192.168.0.42"
Port "502"
Interval 60

<Slave 1>
Instance "power-supply"
Collect "voltage-input-1"
Collect "voltage-input-2"
</Slave>
</Host>

<Data Name> blocks
Data blocks define a mapping between register numbers and the
"types" used by collectd.

Within <Data /> blocks, the following options are allowed:

RegisterBase Number
Configures the base register to read from the device. If the
option RegisterType has been set to Uint32 or Float, this and
the next register will be read (the register number is
increased by one).

RegisterType Uint16|Uint32|Float
Specifies what kind of data is returned by the device. If the
type is Uint32 or Float, two 16 bit registers will be read and
the data is combined into one value. Defaults to Uint16.

Type Type
Specifies the "type" (data set) to use when dispatching the
value to collectd. Currently, only data sets with exactly one
data source are supported.

Instance Instance
Sets the type instance to use when dispatching the value to
collectd. If unset, an empty string (no type instance) is used.

<Host Name> blocks
Host blocks are used to specify to which hosts to connect and what
data to read from their "slaves". The string argument Name is used
as hostname when dispatching the values to collectd.

Within <Host /> blocks, the following options are allowed:

Address Hostname
Specifies the node name (the actual network address) used to
connect to the host. This may be an IP address or a hostname.
Please note that the used libmodbus library only supports IPv4
at the moment.

Port Service
Specifies the port used to connect to the host. The port can
either be given as a number or as a service name. Please note
that the Service argument must be a string, even if ports are
given in their numerical form. Defaults to "502".

Interval Interval
Sets the interval (in seconds) in which the values will be
collected from this host. By default the global Interval
setting will be used.

<Slave ID>
Over each TCP connection, multiple Modbus devices may be
reached. The slave ID is used to specify which device should be
addressed. For each device you want to query, one Slave block
must be given.

Within <Slave /> blocks, the following options are allowed:

Instance Instance
Specify the plugin instance to use when dispatching the
values to collectd. By default "slave_ID" is used.

Collect DataName
Specifies which data to retrieve from the device. DataName
must be the same string as the Name argument passed to a
Data block. You can specify this option multiple times to
collect more than one value from a slave. At least one
Collect option is mandatory.

Plugin "mysql"
The "mysql plugin" requires mysqlclient to be installed. It connects to
one or more databases when started and keeps the connection up as long
as possible. When the connection is interrupted for whatever reason it
will try to re-connect. The plugin will complaint loudly in case
anything goes wrong.

This plugin issues the MySQL "SHOW STATUS" / "SHOW GLOBAL STATUS"
command and collects information about MySQL network traffic, executed
statements, requests, the query cache and threads by evaluating the
"Bytes_{received,sent}", "Com_*", "Handler_*", "Qcache_*" and
"Threads_*" return values. Please refer to the MySQL reference manual,
5.1.6. Server Status Variables for an explanation of these values.

Optionally, master and slave statistics may be collected in a MySQL
replication setup. In that case, information about the synchronization
state of the nodes are collected by evaluating the "Position" return
value of the "SHOW MASTER STATUS" command and the
"Seconds_Behind_Master", "Read_Master_Log_Pos" and
"Exec_Master_Log_Pos" return values of the "SHOW SLAVE STATUS" command.
See the MySQL reference manual, 12.5.5.21 SHOW MASTER STATUS Syntax and
12.5.5.31 SHOW SLAVE STATUS Syntax for details.

Synopsis:

<Plugin mysql>
<Database foo>
Host "hostname"
User "username"
Password "password"
Port "3306"
MasterStats true
</Database>

<Database bar>
Host "localhost"
Socket "/var/run/mysql/mysqld.sock"
SlaveStats true
SlaveNotifications true
</Database>
</Plugin>

A Database block defines one connection to a MySQL database. It accepts
a single argument which specifies the name of the database. None of the
other options are required. MySQL will use default values as documented
in the section "mysql_real_connect()" in the MySQL reference manual.

Host Hostname
Hostname of the database server. Defaults to localhost.

User Username
Username to use when connecting to the database. The user does not
have to be granted any privileges (which is synonym to granting the
"USAGE" privilege), unless you want to collectd replication
statistics (see MasterStats and SlaveStats below). In this case,
the user needs the "REPLICATION CLIENT" (or "SUPER") privileges.
Else, any existing MySQL user will do.

Password Password
Password needed to log into the database.

Database Database
Select this database. Defaults to no database which is a perfectly
reasonable option for what this plugin does.

Port Port
TCP-port to connect to. The port must be specified in its numeric
form, but it must be passed as a string nonetheless. For example:

Port "3306"

If Host is set to localhost (the default), this setting has no
effect. See the documentation for the "mysql_real_connect"
function for details.

Socket Socket
Specifies the path to the UNIX domain socket of the MySQL server.
This option only has any effect, if Host is set to localhost (the
default). Otherwise, use the Port option above. See the
documentation for the "mysql_real_connect" function for details.

MasterStats true|false
SlaveStats true|false
Enable the collection of master / slave statistics in a replication
setup. In order to be able to get access to these statistics, the
user needs special privileges. See the User documentation above.

SlaveNotifications true|false
If enabled, the plugin sends a notification if the replication
slave I/O and / or SQL threads are not running.

Plugin "netapp"
The netapp plugin can collect various performance and capacity
information from a NetApp filer using the NetApp API.

Please note that NetApp has a wide line of products and a lot of
different software versions for each of these products. This plugin was
developed for a NetApp FAS3040 running OnTap 7.2.3P8 and tested on
FAS2050 7.3.1.1L1, FAS3140 7.2.5.1 and FAS3020 7.2.4P9. It should work
for most combinations of model and software version but it is very hard
to test this. If you have used this plugin with other models and/or
software version, feel free to send us a mail to tell us about the
results, even if it's just a short "It works".

To collect these data collectd will log in to the NetApp via HTTP(S)
and HTTP basic authentication.

Do not use a regular user for this! Create a special collectd user with
just the minimum of capabilities needed. The user only needs the
"login-http-admin" capability as well as a few more depending on which
data will be collected. Required capabilities are documented below.

Synopsis

<Plugin "netapp">
<Host "netapp1.example.com">
Protocol "https"
Address "10.0.0.1"
Port 443
User "username"
Password "aef4Aebe"
Interval 30

<WAFL>
Interval 30
GetNameCache true
GetDirCache true
GetBufferCache true
GetInodeCache true
</WAFL>

<Disks>
Interval 30
GetBusy true
</Disks>

<VolumePerf>
Interval 30
GetIO "volume0"
IgnoreSelectedIO false
GetOps "volume0"
IgnoreSelectedOps false
GetLatency "volume0"
IgnoreSelectedLatency false
</VolumePerf>

<VolumeUsage>
Interval 30
GetCapacity "vol0"
GetCapacity "vol1"
IgnoreSelectedCapacity false
GetSnapshot "vol1"
GetSnapshot "vol3"
IgnoreSelectedSnapshot false
</VolumeUsage>

<System>
Interval 30
GetCPULoad true
GetInterfaces true
GetDiskOps true
GetDiskIO true
</System>
</Host>
</Plugin>

The netapp plugin accepts the following configuration options:

Host Name
A host block defines one NetApp filer. It will appear in collectd
with the name you specify here which does not have to be its real
name nor its hostname.

Protocol httpd|http
The protocol collectd will use to query this host.

Optional

Type: string

Default: https

Valid options: http, https

Address Address
The hostname or IP address of the host.

Optional

Type: string

Default: The "host" block's name.

Port Port
The TCP port to connect to on the host.

Optional

Type: integer

Default: 80 for protocol "http", 443 for protocol "https"

User User
Password Password
The username and password to use to login to the NetApp.

Mandatory

Type: string

Interval Interval
TODO

The following options decide what kind of data will be collected. You
can either use them as a block and fine tune various parameters inside
this block, use them as a single statement to just accept all default
values, or omit it to not collect any data.

The following options are valid inside all blocks:

Interval Seconds
Collect the respective statistics every Seconds seconds. Defaults
to the host specific setting.

The System block

This will collect various performance data about the whole system.

Note: To get this data the collectd user needs the "api-perf-object-
get-instances" capability.

Interval Seconds
Collect disk statistics every Seconds seconds.

GetCPULoad true|false
If you set this option to true the current CPU usage will be read.
This will be the average usage between all CPUs in your NetApp
without any information about individual CPUs.

Note: These are the same values that the NetApp CLI command
"sysstat" returns in the "CPU" field.

Optional

Type: boolean

Default: true

Result: Two value lists of type "cpu", and type instances "idle"
and "system".

GetInterfaces true|false
If you set this option to true the current traffic of the network
interfaces will be read. This will be the total traffic over all
interfaces of your NetApp without any information about individual
interfaces.

Note: This is the same values that the NetApp CLI command "sysstat"
returns in the "Net kB/s" field.

Or is it?

Optional

Type: boolean

Default: true

Result: One value list of type "if_octects".

GetDiskIO true|false
If you set this option to true the current IO throughput will be
read. This will be the total IO of your NetApp without any
information about individual disks, volumes or aggregates.

Note: This is the same values that the NetApp CLI command "sysstat"
returns in the "Disk kB/s" field.

Optional

Type: boolean

Default: true

Result: One value list of type "disk_octets".

GetDiskOps true|false
If you set this option to true the current number of HTTP, NFS,
CIFS, FCP, iSCSI, etc. operations will be read. This will be the
total number of operations on your NetApp without any information
about individual volumes or aggregates.

Note: These are the same values that the NetApp CLI command
"sysstat" returns in the "NFS", "CIFS", "HTTP", "FCP" and "iSCSI"
fields.

Optional

Type: boolean

Default: true

Result: A variable number of value lists of type
"disk_ops_complex". Each type of operation will result in one value
list with the name of the operation as type instance.

The WAFL block

This will collect various performance data about the WAFL file system.
At the moment this just means cache performance.

Note: To get this data the collectd user needs the "api-perf-object-
get-instances" capability.

Note: The interface to get these values is classified as "Diagnostics"
by NetApp. This means that it is not guaranteed to be stable even
between minor releases.

Interval Seconds
Collect disk statistics every Seconds seconds.

GetNameCache true|false
Optional

Type: boolean

Default: true

Result: One value list of type "cache_ratio" and type instance
"name_cache_hit".

GetDirCache true|false
Optional

Type: boolean

Default: true

Result: One value list of type "cache_ratio" and type instance
"find_dir_hit".

GetInodeCache true|false
Optional

Type: boolean

Default: true

Result: One value list of type "cache_ratio" and type instance
"inode_cache_hit".

GetBufferCache true|false
Note: This is the same value that the NetApp CLI command "sysstat"
returns in the "Cache hit" field.

Optional

Type: boolean

Default: true

Result: One value list of type "cache_ratio" and type instance
"buf_hash_hit".

The Disks block

This will collect performance data about the individual disks in the
NetApp.

Note: To get this data the collectd user needs the "api-perf-object-
get-instances" capability.

Interval Seconds
Collect disk statistics every Seconds seconds.

GetBusy true|false
If you set this option to true the busy time of all disks will be
calculated and the value of the busiest disk in the system will be
written.

Note: This is the same values that the NetApp CLI command "sysstat"
returns in the "Disk util" field. Probably.

Optional

Type: boolean

Default: true

Result: One value list of type "percent" and type instance
"disk_busy".

The VolumePerf block

This will collect various performance data about the individual
volumes.

You can select which data to collect about which volume using the
following options. They follow the standard ignorelist semantic.

Note: To get this data the collectd user needs the api-perf-object-get-
instances capability.

Interval Seconds
Collect volume performance data every Seconds seconds.

GetIO Volume
GetOps Volume
GetLatency Volume
Select the given volume for IO, operations or latency statistics
collection. The argument is the name of the volume without the
"/vol/" prefix.

Since the standard ignorelist functionality is used here, you can
use a string starting and ending with a slash to specify regular
expression matching: To match the volumes "vol0", "vol2" and
"vol7", you can use this regular expression:

GetIO "/^vol[027]$/"

If no regular expression is specified, an exact match is required.
Both, regular and exact matching are case sensitive.

If no volume was specified at all for either of the three options,
that data will be collected for all available volumes.

IgnoreSelectedIO true|false
IgnoreSelectedOps true|false
IgnoreSelectedLatency true|false
When set to true, the volumes selected for IO, operations or
latency statistics collection will be ignored and the data will be
collected for all other volumes.

When set to false, data will only be collected for the specified
volumes and all other volumes will be ignored.

If no volumes have been specified with the above Get* options, all
volumes will be collected regardless of the IgnoreSelected* option.

Defaults to false

The VolumeUsage block

This will collect capacity data about the individual volumes.

Note: To get this data the collectd user needs the api-volume-list-info
capability.

Interval Seconds
Collect volume usage statistics every Seconds seconds.

GetCapacity VolumeName
The current capacity of the volume will be collected. This will
result in two to four value lists, depending on the configuration
of the volume. All data sources are of type "df_complex" with the
name of the volume as plugin_instance.

There will be type_instances "used" and "free" for the number of
used and available bytes on the volume. If the volume has some
space reserved for snapshots, a type_instance "snap_reserved" will
be available. If the volume has SIS enabled, a type_instance
"sis_saved" will be available. This is the number of bytes saved by
the SIS feature.

Note: The current NetApp API has a bug that results in this value
being reported as a 32 bit number. This plugin tries to guess the
correct number which works most of the time. If you see strange
values here, bug NetApp support to fix this.

Repeat this option to specify multiple volumes.

IgnoreSelectedCapacity true|false
Specify whether to collect only the volumes selected by the
GetCapacity option or to ignore those volumes.
IgnoreSelectedCapacity defaults to false. However, if no
GetCapacity option is specified at all, all capacities will be
selected anyway.

GetSnapshot VolumeName
Select volumes from which to collect snapshot information.

Usually, the space used for snapshots is included in the space
reported as "used". If snapshot information is collected as well,
the space used for snapshots is subtracted from the used space.

To make things even more interesting, it is possible to reserve
space to be used for snapshots. If the space required for snapshots
is less than that reserved space, there is "reserved free" and
"reserved used" space in addition to "free" and "used". If the
space required for snapshots exceeds the reserved space, that part
allocated in the normal space is subtracted from the "used" space
again.

Repeat this option to specify multiple volumes.

IgnoreSelectedSnapshot
Specify whether to collect only the volumes selected by the
GetSnapshot option or to ignore those volumes.
IgnoreSelectedSnapshot defaults to false. However, if no
GetSnapshot option is specified at all, all capacities will be
selected anyway.

Plugin "netlink"
The "netlink" plugin uses a netlink socket to query the Linux kernel
about statistics of various interface and routing aspects.

Interface Interface
VerboseInterface Interface
Instruct the plugin to collect interface statistics. This is
basically the same as the statistics provided by the "interface"
plugin (see above) but potentially much more detailed.

When configuring with Interface only the basic statistics will be
collected, namely octets, packets, and errors. These statistics are
collected by the "interface" plugin, too, so using both at the same
time is no benefit.

When configured with VerboseInterface all counters except the basic
ones, so that no data needs to be collected twice if you use the
"interface" plugin. This includes dropped packets, received
multicast packets, collisions and a whole zoo of differentiated RX
and TX errors. You can try the following command to get an idea of
what awaits you:

ip -s -s link list

If Interface is All, all interfaces will be selected.

QDisc Interface [QDisc]
Class Interface [Class]
Filter Interface [Filter]
Collect the octets and packets that pass a certain qdisc, class or
filter.

QDiscs and classes are identified by their type and handle (or
classid). Filters don't necessarily have a handle, therefore the
parent's handle is used. The notation used in collectd differs
from that used in tc(1) in that it doesn't skip the major or minor
number if it's zero and doesn't print special ids by their name.
So, for example, a qdisc may be identified by "pfifo_fast-1:0" even
though the minor number of all qdiscs is zero and thus not
displayed by tc(1).

If QDisc, Class, or Filter is given without the second argument,
i. .e. without an identifier, all qdiscs, classes, or filters that
are associated with that interface will be collected.

Since a filter itself doesn't necessarily have a handle, the
parent's handle is used. This may lead to problems when more than
one filter is attached to a qdisc or class. This isn't nice, but we
don't know how this could be done any better. If you have a idea,
please don't hesitate to tell us.

As with the Interface option you can specify All as the interface,
meaning all interfaces.

Here are some examples to help you understand the above text more
easily:

<Plugin netlink>
VerboseInterface "All"
QDisc "eth0" "pfifo_fast-1:0"
QDisc "ppp0"
Class "ppp0" "htb-1:10"
Filter "ppp0" "u32-1:0"
</Plugin>

IgnoreSelected
The behavior is the same as with all other similar plugins: If
nothing is selected at all, everything is collected. If some things
are selected using the options described above, only these
statistics are collected. If you set IgnoreSelected to true, this
behavior is inverted, i. e. the specified statistics will not be
collected.

Plugin "network"
The Network plugin sends data to a remote instance of collectd,
receives data from a remote instance, or both at the same time. Data
which has been received from the network is usually not transmitted
again, but this can be activated, see the Forward option below.

The default IPv6 multicast group is "ff18::efc0:4a42". The default IPv4
multicast group is 239.192.74.66. The default UDP port is 25826.

Both, Server and Listen can be used as single option or as block. When
used as block, given options are valid for this socket only. For
example:

<Plugin "network">
Server "collectd.internal.tld"
<Server "collectd.external.tld">
SecurityLevel "sign"
Username "myhostname"
Password "ohl0eQue"
</Server>
</Plugin>

<Server Host [Port]>
The Server statement/block sets the server to send datagrams to.
The statement may occur multiple times to send each datagram to
multiple destinations.

The argument Host may be a hostname, an IPv4 address or an IPv6
address. The optional second argument specifies a port number or a
service name. If not given, the default, 25826, is used.

The following options are recognized within Server blocks:

SecurityLevel Encrypt|Sign|None
Set the security you require for network communication. When
the security level has been set to Encrypt, data sent over the
network will be encrypted using AES-256. The integrity of
encrypted packets is ensured using SHA-1. When set to Sign,
transmitted data is signed using the HMAC-SHA-256 message
authentication code. When set to None, data is sent without any
security.

This feature is only available if the network plugin was linked
with libgcrypt.

Username Username
Sets the username to transmit. This is used by the server to
lookup the password. See AuthFile below. All security levels
except None require this setting.

This feature is only available if the network plugin was linked
with libgcrypt.

Password Password
Sets a password (shared secret) for this socket. All security
levels except None require this setting.

This feature is only available if the network plugin was linked
with libgcrypt.

Interface Interface name
Set the outgoing interface for IP packets. This applies at
least to IPv6 packets and if possible to IPv4. If this option
is not applicable, undefined or a non-existent interface name
is specified, the default behavior is to let the kernel choose
the appropriate interface. Be warned that the manual selection
of an interface for unicast traffic is only necessary in rare
cases.

<Listen Host [Port]>
The Listen statement sets the interfaces to bind to. When multiple
statements are found the daemon will bind to multiple interfaces.

The argument Host may be a hostname, an IPv4 address or an IPv6
address. If the argument is a multicast address the daemon will
join that multicast group. The optional second argument specifies
a port number or a service name. If not given, the default, 25826,
is used.

The following options are recognized within "<Listen>" blocks:

SecurityLevel Encrypt|Sign|None
Set the security you require for network communication. When
the security level has been set to Encrypt, only encrypted data
will be accepted. The integrity of encrypted packets is ensured
using SHA-1. When set to Sign, only signed and encrypted data
is accepted. When set to None, all data will be accepted. If an
AuthFile option was given (see below), encrypted data is
decrypted if possible.

This feature is only available if the network plugin was linked
with libgcrypt.

AuthFile Filename
Sets a file in which usernames are mapped to passwords. These
passwords are used to verify signatures and to decrypt
encrypted network packets. If SecurityLevel is set to None,
this is optional. If given, signed data is verified and
encrypted packets are decrypted. Otherwise, signed data is
accepted without checking the signature and encrypted data
cannot be decrypted. For the other security levels this option
is mandatory.

The file format is very simple: Each line consists of a
username followed by a colon and any number of spaces followed
by the password. To demonstrate, an example file could look
like this:

user0: foo
user1: bar

Each time a packet is received, the modification time of the
file is checked using stat(2). If the file has been changed,
the contents is re-read. While the file is being read, it is
locked using fcntl(2).

Interface Interface name
Set the incoming interface for IP packets explicitly. This
applies at least to IPv6 packets and if possible to IPv4. If
this option is not applicable, undefined or a non-existent
interface name is specified, the default behavior is, to let
the kernel choose the appropriate interface. Thus incoming
traffic gets only accepted, if it arrives on the given
interface.

TimeToLive 1-255
Set the time-to-live of sent packets. This applies to all, unicast
and multicast, and IPv4 and IPv6 packets. The default is to not
change this value. That means that multicast packets will be sent
with a TTL of 1 (one) on most operating systems.

MaxPacketSize 1024-65535
Set the maximum size for datagrams received over the network.
Packets larger than this will be truncated.

Forward true|false
If set to true, write packets that were received via the network
plugin to the sending sockets. This should only be activated when
the Listen- and Server-statements differ. Otherwise packets may be
send multiple times to the same multicast group. While this results
in more network traffic than necessary it's not a huge problem
since the plugin has a duplicate detection, so the values will not
loop.

CacheFlush Seconds
For each host/plugin/type combination the "network plugin" caches
the time of the last value being sent or received. Every Seconds
seconds the plugin searches and removes all entries that are older
than Seconds seconds, thus freeing the unused memory again. Since
this process is somewhat expensive and normally doesn't do much,
this value should not be too small. The default is 1800 seconds,
but setting this to 86400 seconds (one day) will not do much harm
either.

ReportStats true|false
The network plugin cannot only receive and send statistics, it can
also create statistics about itself. Collected data included the
number of received and sent octets and packets, the length of the
receive queue and the number of values handled. When set to true,
the Network plugin will make these statistics available. Defaults
to false.

Plugin "nginx"
This plugin collects the number of connections and requests handled by
the "nginx daemon" (speak: engine X), a HTTP and mail server/proxy. It
queries the page provided by the "ngx_http_stub_status_module" module,
which isn't compiled by default. Please refer to
<http://wiki.codemongers.com/NginxStubStatusModule> for more
information on how to compile and configure nginx and this module.

The following options are accepted by the "nginx plugin":

URL http://host/nginx_status
Sets the URL of the "ngx_http_stub_status_module" output.

User Username
Optional user name needed for authentication.

Password Password
Optional password needed for authentication.

VerifyPeer true|false
Enable or disable peer SSL certificate verification. See
<http://curl.haxx.se/docs/sslcerts.html> for details. Enabled by
default.

Plugin "notify_desktop"
This plugin sends a desktop notification to a notification daemon, as
defined in the Desktop Notification Specification. To actually display
the notifications, notification-daemon is required and collectd has to
be able to access the X server (i. e., the "DISPLAY" and "XAUTHORITY"
environment variables have to be set correctly) and the D-Bus message
bus.

The Desktop Notification Specification can be found at
<http://www.galago-project.org/specs/notification/>.

OkayTimeout timeout
WarningTimeout timeout
FailureTimeout timeout
Set the timeout, in milliseconds, after which to expire the
notification for "OKAY", "WARNING" and "FAILURE" severities
respectively. If zero has been specified, the displayed
notification will not be closed at all - the user has to do so
herself. These options default to 5000. If a negative number has
been specified, the default is used as well.

Plugin "notify_email"
The notify_email plugin uses the ESMTP library to send notifications to
a configured email address.

libESMTP is available from <http://www.stafford.uklinux.net/libesmtp/>.

Available configuration options:

From Address
Email address from which the emails should appear to come from.

Default: "root@localhost"

Recipient Address
Configures the email address(es) to which the notifications should
be mailed. May be repeated to send notifications to multiple
addresses.

At least one Recipient must be present for the plugin to work
correctly.

SMTPServer Hostname
Hostname of the SMTP server to connect to.

Default: "localhost"

SMTPPort Port
TCP port to connect to.

Default: 25

SMTPUser Username
Username for ASMTP authentication. Optional.

SMTPPassword Password
Password for ASMTP authentication. Optional.

Subject Subject
Subject-template to use when sending emails. There must be exactly
two string-placeholders in the subject, given in the standard
printf(3) syntax, i. e. %s. The first will be replaced with the
severity, the second with the hostname.

Default: "Collectd notify: %s@%s"

Plugin "ntpd"
Host Hostname
Hostname of the host running ntpd. Defaults to localhost.

Port Port
UDP-Port to connect to. Defaults to 123.

ReverseLookups true|false
Sets whether or not to perform reverse lookups on peers. Since the
name or IP-address may be used in a filename it is recommended to
disable reverse lookups. The default is to do reverse lookups to
preserve backwards compatibility, though.

Plugin "nut"
UPS upsname@hostname[:port]
Add a UPS to collect data from. The format is identical to the one
accepted by upsc(8).

Plugin "olsrd"
The olsrd plugin connects to the TCP port opened by the txtinfo plugin
of the Optimized Link State Routing daemon and reads information about
the current state of the meshed network.

The following configuration options are understood:

Host Host
Connect to Host. Defaults to "localhost".

Port Port
Specifies the port to connect to. This must be a string, even if
you give the port as a number rather than a service name. Defaults
to "2006".

CollectLinks No|Summary|Detail
Specifies what information to collect about links, i. e. direct
connections of the daemon queried. If set to No, no information is
collected. If set to Summary, the number of links and the average
of all link quality (LQ) and neighbor link quality (NLQ) values is
calculated. If set to Detail LQ and NLQ are collected per link.

Defaults to Detail.

CollectRoutes No|Summary|Detail
Specifies what information to collect about routes of the daemon
queried. If set to No, no information is collected. If set to
Summary, the number of routes and the average metric and ETX is
calculated. If set to Detail metric and ETX are collected per
route.

Defaults to Summary.

CollectTopology No|Summary|Detail
Specifies what information to collect about the global topology. If
set to No, no information is collected. If set to Summary, the
number of links in the entire topology and the average link quality
(LQ) is calculated. If set to Detail LQ and NLQ are collected for
each link in the entire topology.

Defaults to Summary.

Plugin "onewire"
EXPERIMENTAL! See notes below.

The "onewire" plugin uses the owcapi library from the owfs project
<http://owfs.org/> to read sensors connected via the onewire bus.

Currently only temperature sensors (sensors with the family code 10,
e. g. DS1820, DS18S20, DS1920) can be read. If you have other sensors
you would like to have included, please send a sort request to the
mailing list.

Hubs (the DS2409 chips) are working, but read the note, why this plugin
is experimental, below.

Device Device
Sets the device to read the values from. This can either be a
"real" hardware device, such as a serial port or an USB port, or
the address of the owserver(1) socket, usually localhost:4304.

Though the documentation claims to automatically recognize the
given address format, with version 2.7p4 we had to specify the type
explicitly. So with that version, the following configuration
worked for us:

<Plugin onewire>
Device "-s localhost:4304"
</Plugin>

This directive is required and does not have a default value.

Sensor Sensor
Selects sensors to collect or to ignore, depending on
IgnoreSelected, see below. Sensors are specified without the family
byte at the beginning, to you'd use "F10FCA000800", and not include
the leading 10. family byte and point.

IgnoreSelected true|false
If no configuration if given, the onewire plugin will collect data
from all sensors found. This may not be practical, especially if
sensors are added and removed regularly. Sometimes, however, it's
easier/preferred to collect only specific sensors or all sensors
except a few specified ones. This option enables you to do that: By
setting IgnoreSelected to true the effect of Sensor is inverted:
All selected interfaces are ignored and all other interfaces are
collected.

Interval Seconds
Sets the interval in which all sensors should be read. If not
specified, the global Interval setting is used.

EXPERIMENTAL! The "onewire" plugin is experimental, because it doesn't
yet work with big setups. It works with one sensor being attached to
one controller, but as soon as you throw in a couple more senors and
maybe a hub or two, reading all values will take more than ten seconds
(the default interval). We will probably add some separate thread for
reading the sensors and some cache or something like that, but it's not
done yet. We will try to maintain backwards compatibility in the
future, but we can't promise. So in short: If it works for you: Great!
But keep in mind that the config might change, though this is unlikely.
Oh, and if you want to help improving this plugin, just send a short
notice to the mailing list. Thanks :)

Plugin "openvpn"
The OpenVPN plugin reads a status file maintained by OpenVPN and
gathers traffic statistics about connected clients.

To set up OpenVPN to write to the status file periodically, use the
--status option of OpenVPN. Since OpenVPN can write two different
formats, you need to set the required format, too. This is done by
setting --status-version to 2.

So, in a nutshell you need:

openvpn $OTHER_OPTIONS \
--status "/var/run/openvpn-status" 10 \
--status-version 2

Available options:

StatusFile File
Specifies the location of the status file.

ImprovedNamingSchema true|false
When enabled, the filename of the status file will be used as
plugin instance and the client's "common name" will be used as type
instance. This is required when reading multiple status files.
Enabling this option is recommended, but to maintain backwards
compatibility this option is disabled by default.

CollectCompression true|false
Sets whether or not statistics about the compression used by
OpenVPN should be collected. This information is only available in
single mode. Enabled by default.

CollectIndividualUsers true|false
Sets whether or not traffic information is collected for each
connected client individually. If set to false, currently no
traffic data is collected at all because aggregating this data in a
save manner is tricky. Defaults to true.

CollectUserCount true|false
When enabled, the number of currently connected clients or users is
collected. This is especially interesting when
CollectIndividualUsers is disabled, but can be configured
independently from that option. Defaults to false.

Plugin "oracle"
The "oracle" plugin uses the OracleAX Call Interface (OCI) to connect
to an OracleAX Database and lets you execute SQL statements there. It
is very similar to the "dbi" plugin, because it was written around the
same time. See the "dbi" plugin's documentation above for details.

<Plugin oracle>
<Query "out_of_stock">
Statement "SELECT category, COUNT(*) AS value FROM products WHERE in_stock = 0 GROUP BY category"
<Result>
Type "gauge"
# InstancePrefix "foo"
InstancesFrom "category"
ValuesFrom "value"
</Result>
</Query>
<Database "product_information">
ConnectID "db01"
Username "oracle"
Password "secret"
Query "out_of_stock"
</Database>
</Plugin>

Query blocks

The Query blocks are handled identically to the Query blocks of the
"dbi" plugin. Please see its documentation above for details on how to
specify queries.

Database blocks

Database blocks define a connection to a database and which queries
should be sent to that database. Each database needs a "name" as string
argument in the starting tag of the block. This name will be used as
"PluginInstance" in the values submitted to the daemon. Other than
that, that name is not used.

ConnectID ID
Defines the "database alias" or "service name" to connect to.
Usually, these names are defined in the file named
"$ORACLE_HOME/network/admin/tnsnames.ora".

Username Username
Username used for authentication.

Password Password
Password used for authentication.

Plugin "perl"
This plugin embeds a Perl-interpreter into collectd and provides an
interface to collectd's plugin system. See collectd-perl(5) for its
documentation.

Plugin "pinba"
The Pinba plugin receives profiling information from Pinba, an
extension for the PHP interpreter. At the end of executing a script,
i.e. after a PHP-based webpage has been delivered, the extension will
send a UDP packet containing timing information, peak memory usage and
so on. The plugin will wait for such packets, parse them and account
the provided information, which is then dispatched to the daemon once
per interval.

Synopsis:

<Plugin pinba>
Address "::0"
Port "30002"
# Overall statistics for the website.
<View "www-total">
Server "www.example.com"
</View>
# Statistics for www-a only
<View "www-a">
Host "www-a.example.com"
Server "www.example.com"
</View>
# Statistics for www-b only
<View "www-b">
Host "www-b.example.com"
Server "www.example.com"
</View>
</Plugin>

The plugin provides the following configuration options:

Address Node
Configures the address used to open a listening socket. By default,
plugin will bind to the any address "::0".

Port Service
Configures the port (service) to bind to. By default the default
Pinba port "30002" will be used. The option accepts service names
in addition to port numbers and thus requires a string argument.

<View Name> block
The packets sent by the Pinba extension include the hostname of the
server, the server name (the name of the virtual host) and the
script that was executed. Using View blocks it is possible to
separate the data into multiple groups to get more meaningful
statistics. Each packet is added to all matching groups, so that a
packet may be accounted for more than once.

Host Host
Matches the hostname of the system the webserver / script is
running on. This will contain the result of the gethostname(2)
system call. If not configured, all hostnames will be accepted.

Server Server
Matches the name of the virtual host, i.e. the contents of the
$_SERVER["SERVER_NAME"] variable when within PHP. If not
configured, all server names will be accepted.

Script Script
Matches the name of the script name, i.e. the contents of the
$_SERVER["SCRIPT_NAME"] variable when within PHP. If not
configured, all script names will be accepted.

Plugin "ping"
The Ping plugin starts a new thread which sends ICMP "ping" packets to
the configured hosts periodically and measures the network latency.
Whenever the "read" function of the plugin is called, it submits the
average latency, the standard deviation and the drop rate for each
host.

Available configuration options:

Host IP-address
Host to ping periodically. This option may be repeated several
times to ping multiple hosts.

Interval Seconds
Sets the interval in which to send ICMP echo packets to the
configured hosts. This is not the interval in which statistics are
queries from the plugin but the interval in which the hosts are
"pinged". Therefore, the setting here should be smaller than or
equal to the global Interval setting. Fractional times, such as
"1.24" are allowed.

Default: 1.0

Timeout Seconds
Time to wait for a response from the host to which an ICMP packet
had been sent. If a reply was not received after Seconds seconds,
the host is assumed to be down or the packet to be dropped. This
setting must be smaller than the Interval setting above for the
plugin to work correctly. Fractional arguments are accepted.

Default: 0.9

TTL 0-255
Sets the Time-To-Live of generated ICMP packets.

SourceAddress host
Sets the source address to use. host may either be a numerical
network address or a network hostname.

Device name
Sets the outgoing network device to be used. name has to specify an
interface name (e. g. "eth0"). This might not be supported by all
operating systems.

MaxMissed Packets
Trigger a DNS resolve after the host has not replied to Packets
packets. This enables the use of dynamic DNS services (like
dyndns.org) with the ping plugin.

Default: -1 (disabled)

Plugin "postgresql"
The "postgresql" plugin queries statistics from PostgreSQL databases.
It keeps a persistent connection to all configured databases and tries
to reconnect if the connection has been interrupted. A database is
configured by specifying a Database block as described below. The
default statistics are collected from PostgreSQL's statistics collector
which thus has to be enabled for this plugin to work correctly. This
should usually be the case by default. See the section "The Statistics
Collector" of the PostgreSQL Documentation for details.

By specifying custom database queries using a Query block as described
below, you may collect any data that is available from some PostgreSQL
database. This way, you are able to access statistics of external
daemons which are available in a PostgreSQL database or use future or
special statistics provided by PostgreSQL without the need to upgrade
your collectd installation.

The PostgreSQL Documentation manual can be found at
<http://www.postgresql.org/docs/manuals/>.

<Plugin postgresql>
<Query magic>
Statement "SELECT magic FROM wizard WHERE host = $1;"
Param hostname
<Result>
Type gauge
InstancePrefix "magic"
ValuesFrom magic
</Result>
</Query>

<Query rt36_tickets>
Statement "SELECT COUNT(type) AS count, type \
FROM (SELECT CASE \
WHEN resolved = 'epoch' THEN 'open' \
ELSE 'resolved' END AS type \
FROM tickets) type \
GROUP BY type;"
<Result>
Type counter
InstancePrefix "rt36_tickets"
InstancesFrom "type"
ValuesFrom "count"
</Result>
</Query>

<Database foo>
Host "hostname"
Port "5432"
User "username"
Password "secret"
SSLMode "prefer"
KRBSrvName "kerberos_service_name"
Query magic
</Database>

<Database bar>
Interval 300
Service "service_name"
Query backend # predefined
Query rt36_tickets
</Database>
</Plugin>

The Query block defines one database query which may later be used by a
database definition. It accepts a single mandatory argument which
specifies the name of the query. The names of all queries have to be
unique (see the MinVersion and MaxVersion options below for an
exception to this rule). The following configuration options are
available to define the query:

In each Query block, there is one or more Result blocks. Result blocks
define how to handle the values returned from the query. They define
which column holds which value and how to dispatch that value to the
daemon. Multiple Result blocks may be used to extract multiple values
from a single query.

Statement sql query statement
Specify the sql query statement which the plugin should execute.
The string may contain the tokens $1, $2, etc. which are used to
reference the first, second, etc. parameter. The value of the
parameters is specified by the Param configuration option - see
below for details. To include a literal $ character followed by a
number, surround it with single quotes (').

Any SQL command which may return data (such as "SELECT" or "SHOW")
is allowed. Note, however, that only a single command may be used.
Semicolons are allowed as long as a single non-empty command has
been specified only.

The returned lines will be handled separately one after another.

Query sql query statement
This is a deprecated synonym for Statement. It will be removed in
version 5 of collectd.

Param hostname|database|username|interval
Specify the parameters which should be passed to the SQL query. The
parameters are referred to in the SQL query as $1, $2, etc. in the
same order as they appear in the configuration file. The value of
the parameter is determined depending on the value of the Param
option as follows:

hostname
The configured hostname of the database connection. If a UNIX
domain socket is used, the parameter expands to "localhost".

database
The name of the database of the current connection.

username
The username used to connect to the database.

interval
The interval with which this database is queried (as specified
by the database specific or global Interval options).

Please note that parameters are only supported by PostgreSQL's
protocol version 3 and above which was introduced in version 7.4 of
PostgreSQL.

Type type
The type name to be used when dispatching the values. The type
describes how to handle the data and where to store it. See
types.db(5) for more details on types and their configuration. The
number and type of values (as selected by the ValuesFrom option)
has to match the type of the given name.

This option is required inside a Result block.

InstancePrefix prefix
InstancesFrom column0 [column1 ...]
Specify how to create the "TypeInstance" for each data set (i. e.
line). InstancePrefix defines a static prefix that will be
prepended to all type instances. InstancesFrom defines the column
names whose values will be used to create the type instance.
Multiple values will be joined together using the hyphen ("-") as
separation character.

The plugin itself does not check whether or not all built instances
are different. It is your responsibility to assure that each is
unique.

Both options are optional. If none is specified, the type instance
will be empty.

ValuesFrom column0 [column1 ...]
Names the columns whose content is used as the actual data for the
data sets that are dispatched to the daemon. How many such columns
you need is determined by the Type setting as explained above. If
you specify too many or not enough columns, the plugin will
complain about that and no data will be submitted to the daemon.

The actual data type, as seen by PostgreSQL, is not that important
as long as it represents numbers. The plugin will automatically
cast the values to the right type if it know how to do that. For
that, it uses the strtoll(3) and strtod(3) functions, so anything
supported by those functions is supported by the plugin as well.

This option is required inside a Result block and may be specified
multiple times. If multiple ValuesFrom options are specified, the
columns are read in the given order.

Column type [type instance]
This is a deprecated alternative to a Result block. It will be
removed in version 5 of collectd. It is equivalent to the following
Result block:

<Result>
Type I<type>
InstancePrefix I<type instance>
ValuesFrom I<name of the x. column>
</Result>

The order of the Column options defines which columns of the query
result should be used. The first option specifies the data found in
the first column, the second option that of the second column, and
so on.

MinVersion version
MaxVersion version
Specify the minimum or maximum version of PostgreSQL that this
query should be used with. Some statistics might only be available
with certain versions of PostgreSQL. This allows you to specify
multiple queries with the same name but which apply to different
versions, thus allowing you to use the same configuration in a
heterogeneous environment.

The version has to be specified as the concatenation of the major,
minor and patch-level versions, each represented as two-decimal-
digit numbers. For example, version 8.2.3 will become 80203.

MinPGVersion version
MaxPGVersion version
These are deprecated synonyms for MinVersion and MaxVersion
respectively. They will be removed in version 5 of collectd.

The following predefined queries are available (the definitions can be
found in the postgresql_default.conf file which, by default, is
available at "prefix/share/collectd/"):

backends
This query collects the number of backends, i. e. the number of
connected clients.

transactions
This query collects the numbers of committed and rolled-back
transactions of the user tables.

queries
This query collects the numbers of various table modifications
(i. e. insertions, updates, deletions) of the user tables.

query_plans
This query collects the numbers of various table scans and returned
tuples of the user tables.

table_states
This query collects the numbers of live and dead rows in the user
tables.

disk_io
This query collects disk block access counts for user tables.

disk_usage
This query collects the on-disk size of the database in bytes.

The Database block defines one PostgreSQL database for which to collect
statistics. It accepts a single mandatory argument which specifies the
database name. None of the other options are required. PostgreSQL will
use default values as documented in the section "CONNECTING TO A
DATABASE" in the psql(1) manpage. However, be aware that those defaults
may be influenced by the user collectd is run as and special
environment variables. See the manpage for details.

Interval seconds
Specify the interval with which the database should be queried. The
default is to use the global Interval setting.

Host hostname
Specify the hostname or IP of the PostgreSQL server to connect to.
If the value begins with a slash, it is interpreted as the
directory name in which to look for the UNIX domain socket.

This option is also used to determine the hostname that is
associated with a collected data set. If it has been omitted or
either begins with with a slash or equals localhost it will be
replaced with the global hostname definition of collectd. Any other
value will be passed literally to collectd when dispatching values.
Also see the global Hostname and FQDNLookup options.

Port port
Specify the TCP port or the local UNIX domain socket file extension
of the server.

User username
Specify the username to be used when connecting to the server.

Password password
Specify the password to be used when connecting to the server.

SSLMode disable|allow|prefer|require
Specify whether to use an SSL connection when contacting the
server. The following modes are supported:

disable
Do not use SSL at all.

allow
First, try to connect without using SSL. If that fails, try
using SSL.

prefer (default)
First, try to connect using SSL. If that fails, try without
using SSL.

require
Use SSL only.

KRBSrvName kerberos_service_name
Specify the Kerberos service name to use when authenticating with
Kerberos 5 or GSSAPI. See the sections "Kerberos authentication"
and "GSSAPI" of the PostgreSQL Documentation for details.

Service service_name
Specify the PostgreSQL service name to use for additional
parameters. That service has to be defined in pg_service.conf and
holds additional connection parameters. See the section "The
Connection Service File" in the PostgreSQL Documentation for
details.

Query query
Specify a query which should be executed for the database
connection. This may be any of the predefined or user-defined
queries. If no such option is given, it defaults to "backends",
"transactions", "queries", "query_plans", "table_states", "disk_io"
and "disk_usage". Else, the specified queries are used only.

Plugin "powerdns"
The "powerdns" plugin queries statistics from an authoritative PowerDNS
nameserver and/or a PowerDNS recursor. Since both offer a wide variety
of values, many of which are probably meaningless to most users, but
may be useful for some. So you may chose which values to collect, but
if you don't, some reasonable defaults will be collected.

<Plugin "powerdns">
<Server "server_name">
Collect "latency"
Collect "udp-answers" "udp-queries"
Socket "/var/run/pdns.controlsocket"
</Server>
<Recursor "recursor_name">
Collect "questions"
Collect "cache-hits" "cache-misses"
Socket "/var/run/pdns_recursor.controlsocket"
</Recursor>
LocalSocket "/opt/collectd/var/run/collectd-powerdns"
</Plugin>

Server and Recursor block
The Server block defines one authoritative server to query, the
Recursor does the same for an recursing server. The possible
options in both blocks are the same, though. The argument defines a
name for the server / recursor and is required.

Collect Field
Using the Collect statement you can select which values to
collect. Here, you specify the name of the values as used by
the PowerDNS servers, e. g. "dlg-only-drops", "answers10-100".

The method of getting the values differs for Server and
Recursor blocks: When querying the server a "SHOW *" command is
issued in any case, because that's the only way of getting
multiple values out of the server at once. collectd then picks
out the values you have selected. When querying the recursor, a
command is generated to query exactly these values. So if you
specify invalid fields when querying the recursor, a syntax
error may be returned by the daemon and collectd may not
collect any values at all.

If no Collect statement is given, the following Server values
will be collected:

latency
packetcache-hit
packetcache-miss
packetcache-size
query-cache-hit
query-cache-miss
recursing-answers
recursing-questions
tcp-answers
tcp-queries
udp-answers
udp-queries

The following Recursor values will be collected by default:

noerror-answers
nxdomain-answers
servfail-answers
sys-msec
user-msec
qa-latency
cache-entries
cache-hits
cache-misses
questions

Please note that up to that point collectd doesn't know what
values are available on the server and values that are added do
not need a change of the mechanism so far. However, the values
must be mapped to collectd's naming scheme, which is done using
a lookup table that lists all known values. If values are added
in the future and collectd does not know about them, you will
get an error much like this:

powerdns plugin: submit: Not found in lookup table: foobar = 42

In this case please file a bug report with the collectd team.

Socket Path
Configures the path to the UNIX domain socket to be used when
connecting to the daemon. By default
"${localstatedir}/run/pdns.controlsocket" will be used for an
authoritative server and
"${localstatedir}/run/pdns_recursor.controlsocket" will be used
for the recursor.

LocalSocket Path
Querying the recursor is done using UDP. When using UDP over UNIX
domain sockets, the client socket needs a name in the file system,
too. You can set this local name to Path using the LocalSocket
option. The default is "prefix/var/run/collectd-powerdns".

Plugin "processes"
Process Name
Select more detailed statistics of processes matching this name.
The statistics collected for these selected processes are size of
the resident segment size (RSS), user- and system-time used, number
of processes and number of threads, io data (where available) and
minor and major pagefaults.

ProcessMatch name regex
Similar to the Process option this allows to select more detailed
statistics of processes matching the specified regex (see regex(7)
for details). The statistics of all matching processes are summed
up and dispatched to the daemon using the specified name as an
identifier. This allows to "group" several processes together. name
must not contain slashes.

Plugin "protocols"
Collects a lot of information about various network protocols, such as
IP, TCP, UDP, etc.

Available configuration options:

Value Selector
Selects whether or not to select a specific value. The string being
matched is of the form "Protocol:ValueName", where Protocol will be
used as the plugin instance and ValueName will be used as type
instance. An example of the string being used would be
"Tcp:RetransSegs".

You can use regular expressions to match a large number of values
with just one configuration option. To select all "extended" TCP
values, you could use the following statement:

Value "/^TcpExt:/"

Whether only matched values are selected or all matched values are
ignored depends on the IgnoreSelected. By default, only matched
values are selected. If no value is configured at all, all values
will be selected.

IgnoreSelected true|false
If set to true, inverts the selection made by Value, i. e. all
matching values will be ignored.

Plugin "python"
This plugin embeds a Python-interpreter into collectd and provides an
interface to collectd's plugin system. See collectd-python(5) for its
documentation.

Plugin "routeros"
The "routeros" plugin connects to a device running RouterOS, the Linux-
based operating system for routers by MikroTik. The plugin uses
librouteros to connect and reads information about the interfaces and
wireless connections of the device. The configuration supports querying
multiple routers:

<Plugin "routeros">
<Router>
Host "router0.example.com"
User "collectd"
Password "secr3t"
CollectInterface true
CollectCPULoad true
CollectMemory true
</Router>
<Router>
Host "router1.example.com"
User "collectd"
Password "5ecret"
CollectInterface true
CollectRegistrationTable true
CollectDF true
CollectDisk true
</Router>
</Plugin>

As you can see above, the configuration of the routeros plugin consists
of one or more <Router> blocks. Within each block, the following
options are understood:

Host Host
Hostname or IP-address of the router to connect to.

Port Port
Port name or port number used when connecting. If left unspecified,
the default will be chosen by librouteros, currently "8728". This
option expects a string argument, even when a numeric port number
is given.

User User
Use the user name User to authenticate. Defaults to "admin".

Password Password
Set the password used to authenticate.

CollectInterface true|false
When set to true, interface statistics will be collected for all
interfaces present on the device. Defaults to false.

CollectRegistrationTable true|false
When set to true, information about wireless LAN connections will
be collected. Defaults to false.

CollectCPULoad true|false
When set to true, information about the CPU usage will be
collected. The number is a dimensionless value where zero indicates
no CPU usage at all. Defaults to false.

CollectMemory true|false
When enabled, the amount of used and free memory will be collected.
How used memory is calculated is unknown, for example whether or
not caches are counted as used space. Defaults to false.

CollectDF true|false
When enabled, the amount of used and free disk space will be
collected. Defaults to false.

CollectDisk true|false
When enabled, the number of sectors written and bad blocks will be
collected. Defaults to false.

Plugin "rrdcached"
The "rrdcached" plugin uses the RRDtool accelerator daemon,
rrdcached(1), to store values to RRD files in an efficient manner. The
combination of the "rrdcached" plugin and the "rrdcached" daemon is
very similar to the way the "rrdtool" plugin works (see below). The
added abstraction layer provides a number of benefits, though: Because
the cache is not within "collectd" anymore, it does not need to be
flushed when "collectd" is to be restarted. This results in much
shorter (if any) gaps in graphs, especially under heavy load. Also, the
"rrdtool" command line utility is aware of the daemon so that it can
flush values to disk automatically when needed. This allows to
integrate automated flushing of values into graphing solutions much
more easily.

There are disadvantages, though: The daemon may reside on a different
host, so it may not be possible for "collectd" to create the
appropriate RRD files anymore. And even if "rrdcached" runs on the same
host, it may run in a different base directory, so relative paths may
do weird stuff if you're not careful.

So the recommended configuration is to let "collectd" and "rrdcached"
run on the same host, communicating via a UNIX domain socket. The
DataDir setting should be set to an absolute path, so that a changed
base directory does not result in RRD files being created / expected in
the wrong place.

DaemonAddress Address
Address of the daemon as understood by the "rrdc_connect" function
of the RRD library. See rrdcached(1) for details. Example:

<Plugin "rrdcached">
DaemonAddress "unix:/var/run/rrdcached.sock"
</Plugin>

DataDir Directory
Set the base directory in which the RRD files reside. If this is a
relative path, it is relative to the working base directory of the
"rrdcached" daemon! Use of an absolute path is recommended.

CreateFiles true|false
Enables or disables the creation of RRD files. If the daemon is not
running locally, or DataDir is set to a relative path, this will
not work as expected. Default is true.

Plugin "rrdtool"
You can use the settings StepSize, HeartBeat, RRARows, and XFF to fine-
tune your RRD-files. Please read rrdcreate(1) if you encounter problems
using these settings. If you don't want to dive into the depths of
RRDtool, you can safely ignore these settings.

DataDir Directory
Set the directory to store RRD-files under. Per default RRD-files
are generated beneath the daemon's working directory, i. e. the
BaseDir.

StepSize Seconds
Force the stepsize of newly created RRD-files. Ideally (and per
default) this setting is unset and the stepsize is set to the
interval in which the data is collected. Do not use this option
unless you absolutely have to for some reason. Setting this option
may cause problems with the "snmp plugin", the "exec plugin" or
when the daemon is set up to receive data from other hosts.

HeartBeat Seconds
Force the heartbeat of newly created RRD-files. This setting should
be unset in which case the heartbeat is set to twice the StepSize
which should equal the interval in which data is collected. Do not
set this option unless you have a very good reason to do so.

RRARows NumRows
The "rrdtool plugin" calculates the number of PDPs per CDP based on
the StepSize, this setting and a timespan. This plugin creates RRD-
files with three times five RRAs, i. e. five RRAs with the CFs MIN,
AVERAGE, and MAX. The five RRAs are optimized for graphs covering
one hour, one day, one week, one month, and one year.

So for each timespan, it calculates how many PDPs need to be
consolidated into one CDP by calculating:
number of PDPs = timespan / (stepsize * rrarows)

Bottom line is, set this no smaller than the width of you graphs in
pixels. The default is 1200.

RRATimespan Seconds
Adds an RRA-timespan, given in seconds. Use this option multiple
times to have more then one RRA. If this option is never used, the
built-in default of (3600, 86400, 604800, 2678400, 31622400) is
used.

For more information on how RRA-sizes are calculated see RRARows
above.

XFF Factor
Set the "XFiles Factor". The default is 0.1. If unsure, don't set
this option.

CacheFlush Seconds
When the "rrdtool" plugin uses a cache (by setting CacheTimeout,
see below) it writes all values for a certain RRD-file if the
oldest value is older than (or equal to) the number of seconds
specified. If some RRD-file is not updated anymore for some reason
(the computer was shut down, the network is broken, etc.) some
values may still be in the cache. If CacheFlush is set, then the
entire cache is searched for entries older than CacheTimeout
seconds and written to disk every Seconds seconds. Since this is
kind of expensive and does nothing under normal circumstances, this
value should not be too small. 900 seconds might be a good value,
though setting this to 7200 seconds doesn't normally do much harm
either.

CacheTimeout Seconds
If this option is set to a value greater than zero, the "rrdtool
plugin" will save values in a cache, as described above. Writing
multiple values at once reduces IO-operations and thus lessens the
load produced by updating the files. The trade off is that the
graphs kind of "drag behind" and that more memory is used.

WritesPerSecond Updates
When collecting many statistics with collectd and the "rrdtool"
plugin, you will run serious performance problems. The CacheFlush
setting and the internal update queue assert that collectd
continues to work just fine even under heavy load, but the system
may become very unresponsive and slow. This is a problem especially
if you create graphs from the RRD files on the same machine, for
example using the "graph.cgi" script included in the
"contrib/collection3/" directory.

This setting is designed for very large setups. Setting this option
to a value between 25 and 80 updates per second, depending on your
hardware, will leave the server responsive enough to draw graphs
even while all the cached values are written to disk. Flushed
values, i. e. values that are forced to disk by the FLUSH command,
are not effected by this limit. They are still written as fast as
possible, so that web frontends have up to date data when
generating graphs.

For example: If you have 100,000 RRD files and set WritesPerSecond
to 30 updates per second, writing all values to disk will take
approximately 56 minutes. Together with the flushing ability that's
integrated into "collection3" you'll end up with a responsive and
fast system, up to date graphs and basically a "backup" of your
values every hour.

RandomTimeout Seconds
When set, the actual timeout for each value is chosen randomly
between CacheTimeout-RandomTimeout and CacheTimeout+RandomTimeout.
The intention is to avoid high load situations that appear when
many values timeout at the same time. This is especially a problem
shortly after the daemon starts, because all values were added to
the internal cache at roughly the same time.

Plugin "sensors"
The "sensors plugin" uses lm_sensors to retrieve sensor-values. This
means that all the needed modules have to be loaded and lm_sensors has
to be configured (most likely by editing /etc/sensors.conf. Read
sensors.conf(5) for details.

The lm_sensors homepage can be found at
<http://secure.netroedge.com/~lm78/>.

Sensor chip-bus-address/type-feature
Selects the name of the sensor which you want to collect or ignore,
depending on the IgnoreSelected below. For example, the option
"Sensor it8712-isa-0290/voltage-in1" will cause collectd to gather
data for the voltage sensor in1 of the it8712 on the isa bus at the
address 0290.

IgnoreSelected true|false
If no configuration if given, the sensors-plugin will collect data
from all sensors. This may not be practical, especially for
uninteresting sensors. Thus, you can use the Sensor-option to pick
the sensors you're interested in. Sometimes, however, it's
easier/preferred to collect all sensors except a few ones. This
option enables you to do that: By setting IgnoreSelected to true
the effect of Sensor is inverted: All selected sensors are ignored
and all other sensors are collected.

Plugin "snmp"
Since the configuration of the "snmp plugin" is a little more
complicated than other plugins, its documentation has been moved to an
own manpage, collectd-snmp(5). Please see there for details.

Plugin "syslog"
LogLevel debug|info|notice|warning|err
Sets the log-level. If, for example, set to notice, then all events
with severity notice, warning, or err will be submitted to the
syslog-daemon.

Please note that debug is only available if collectd has been
compiled with debugging support.

Plugin "table"
The "table plugin" provides generic means to parse tabular data and
dispatch user specified values. Values are selected based on column
numbers. For example, this plugin may be used to get values from the
Linux proc(5) filesystem or CSV (comma separated values) files.

<Plugin table>
<Table "/proc/slabinfo">
Instance "slabinfo"
Separator " "
<Result>
Type gauge
InstancePrefix "active_objs"
InstancesFrom 0
ValuesFrom 1
</Result>
<Result>
Type gauge
InstancePrefix "objperslab"
InstancesFrom 0
ValuesFrom 4
</Result>
</Table>
</Plugin>

The configuration consists of one or more Table blocks, each of which
configures one file to parse. Within each Table block, there are one or
more Result blocks, which configure which data to select and how to
interpret it.

The following options are available inside a Table block:

Instance instance
If specified, instance is used as the plugin instance. So, in the
above example, the plugin name "table-slabinfo" would be used. If
omitted, the filename of the table is used instead, with all
special characters replaced with an underscore ("_").

Separator string
Any character of string is interpreted as a delimiter between the
different columns of the table. A sequence of two or more
contiguous delimiters in the table is considered to be a single
delimiter, i. e. there cannot be any empty columns. The plugin uses
the strtok_r(3) function to parse the lines of a table - see its
documentation for more details. This option is mandatory.

A horizontal tab, newline and carriage return may be specified by
"\\t", "\\n" and "\\r" respectively. Please note that the double
backslashes are required because of collectd's config parsing.

The following options are available inside a Result block:

Type type
Sets the type used to dispatch the values to the daemon. Detailed
information about types and their configuration can be found in
types.db(5). This option is mandatory.

InstancePrefix prefix
If specified, prepend prefix to the type instance. If omitted, only
the InstancesFrom option is considered for the type instance.

InstancesFrom column0 [column1 ...]
If specified, the content of the given columns (identified by the
column number starting at zero) will be used to create the type
instance for each row. Multiple values (and the instance prefix)
will be joined together with dashes (-) as separation character. If
omitted, only the InstancePrefix option is considered for the type
instance.

The plugin itself does not check whether or not all built instances
are different. ItaXXs your responsibility to assure that each is
unique. This is especially true, if you do not specify
InstancesFrom: You have to make sure that the table only contains
one row.

If neither InstancePrefix nor InstancesFrom is given, the type
instance will be empty.

ValuesFrom column0 [column1 ...]
Specifies the columns (identified by the column numbers starting at
zero) whose content is used as the actual data for the data sets
that are dispatched to the daemon. How many such columns you need
is determined by the Type setting above. If you specify too many or
not enough columns, the plugin will complain about that and no data
will be submitted to the daemon. The plugin uses strtoll(3) and
strtod(3) to parse counter and gauge values respectively, so
anything supported by those functions is supported by the plugin as
well. This option is mandatory.

Plugin "tail"
The "tail plugin" follows logfiles, just like tail(1) does, parses each
line and dispatches found values. What is matched can be configured by
the user using (extended) regular expressions, as described in
regex(7).

<Plugin "tail">
<File "/var/log/exim4/mainlog">
Instance "exim"
<Match>
Regex "S=([1-9][0-9]*)"
DSType "CounterAdd"
Type "ipt_bytes"
Instance "total"
</Match>
<Match>
Regex "\\<R=local_user\\>"
ExcludeRegex "\\<R=local_user\\>.*mail_spool defer"
DSType "CounterInc"
Type "counter"
Instance "local_user"
</Match>
</File>
</Plugin>

The config consists of one or more File blocks, each of which
configures one logfile to parse. Within each File block, there are one
or more Match blocks, which configure a regular expression to search
for.

The Instance option in the File block may be used to set the plugin
instance. So in the above example the plugin name "tail-foo" would be
used. This plugin instance is for all Match blocks that follow it,
until the next Instance option. This way you can extract several plugin
instances from one logfile, handy when parsing syslog and the like.

Each Match block has the following options to describe how the match
should be performed:

Regex regex
Sets the regular expression to use for matching against a line. The
first subexpression has to match something that can be turned into
a number by strtoll(3) or strtod(3), depending on the value of
"CounterAdd", see below. Because extended regular expressions are
used, you do not need to use backslashes for subexpressions! If in
doubt, please consult regex(7). Due to collectd's config parsing
you need to escape backslashes, though. So if you want to match
literal parentheses you need to do the following:

Regex "SPAM \$Score: (-?[0-9]+\\.[0-9]+)\$"

ExcludeRegex regex
Sets an optional regular expression to use for excluding lines from
the match. An example which excludes all connections from
localhost from the match:

ExcludeRegex "127\\.0\\.0\\.1"

DSType Type
Sets how the values are cumulated. Type is one of:

GaugeAverage
Calculate the average.

GaugeMin
Use the smallest number only.

GaugeMax
Use the greatest number only.

GaugeLast
Use the last number found.

CounterSet
DeriveSet
AbsoluteSet
The matched number is a counter. Simply sets the internal
counter to this value. Variants exist for "COUNTER", "DERIVE",
and "ABSOLUTE" data sources.

CounterAdd
DeriveAdd
Add the matched value to the internal counter. In case of
DeriveAdd, the matched number may be negative, which will
effectively subtract from the internal counter.

CounterInc
DeriveInc
Increase the internal counter by one. These DSType are the only
ones that do not use the matched subexpression, but simply
count the number of matched lines. Thus, you may use a regular
expression without submatch in this case.

As you'd expect the Gauge* types interpret the submatch as a
floating point number, using strtod(3). The Counter* and
AbsoluteSet types interpret the submatch as an unsigned integer
using strtoull(3). The Derive* types interpret the submatch as a
signed integer using strtoll(3). CounterInc and DeriveInc do not
use the submatch at all and it may be omitted in this case.

Type Type
Sets the type used to dispatch this value. Detailed information
about types and their configuration can be found in types.db(5).

Instance TypeInstance
This optional setting sets the type instance to use.

Plugin "teamspeak2"
The "teamspeak2 plugin" connects to the query port of a teamspeak2
server and polls interesting global and virtual server data. The plugin
can query only one physical server but unlimited virtual servers. You
can use the following options to configure it:

Host hostname/ip
The hostname or ip which identifies the physical server. Default:
127.0.0.1

Port port
The query port of the physical server. This needs to be a string.
Default: "51234"

Server port
This option has to be added once for every virtual server the
plugin should query. If you want to query the virtual server on
port 8767 this is what the option would look like:

Server "8767"

This option, although numeric, needs to be a string, i. e. you must
use quotes around it! If no such statement is given only global
information will be collected.

Plugin "ted"
The TED plugin connects to a device of "The Energy Detective", a device
to measure power consumption. These devices are usually connected to a
serial (RS232) or USB port. The plugin opens a configured device and
tries to read the current energy readings. For more information on TED,
visit <http://www.theenergydetective.com/>.

Available configuration options:

Device Path
Path to the device on which TED is connected. collectd will need
read and write permissions on that file.

Default: /dev/ttyUSB0

Retries Num
Apparently reading from TED is not that reliable. You can therefore
configure a number of retries here. You only configure the retries
here, to if you specify zero, one reading will be performed (but no
retries if that fails); if you specify three, a maximum of four
readings are performed. Negative values are illegal.

Default: 0

Plugin "tcpconns"
The "tcpconns plugin" counts the number of currently established TCP
connections based on the local port and/or the remote port. Since there
may be a lot of connections the default if to count all connections
with a local port, for which a listening socket is opened. You can use
the following options to fine-tune the ports you are interested in:

ListeningPorts true|false
If this option is set to true, statistics for all local ports for
which a listening socket exists are collected. The default depends
on LocalPort and RemotePort (see below): If no port at all is
specifically selected, the default is to collect listening ports.
If specific ports (no matter if local or remote ports) are
selected, this option defaults to false, i. e. only the selected
ports will be collected unless this option is set to true
specifically.

LocalPort Port
Count the connections to a specific local port. This can be used to
see how many connections are handled by a specific daemon, e. g.
the mailserver. You have to specify the port in numeric form, so
for the mailserver example you'd need to set 25.

RemotePort Port
Count the connections to a specific remote port. This is useful to
see how much a remote service is used. This is most useful if you
want to know how many connections a local service has opened to
remote services, e. g. how many connections a mail server or news
server has to other mail or news servers, or how many connections a
web proxy holds to web servers. You have to give the port in
numeric form.

Plugin "thermal"
ForceUseProcfs true|false
By default, the "thermal" plugin tries to read the statistics from
the Linux "sysfs" interface. If that is not available, the plugin
falls back to the "procfs" interface. By setting this option to
true, you can force the plugin to use the latter. This option
defaults to false.

Device Device
Selects the name of the thermal device that you want to collect or
ignore, depending on the value of the IgnoreSelected option. This
option may be used multiple times to specify a list of devices.

IgnoreSelected true|false
Invert the selection: If set to true, all devices except the ones
that match the device names specified by the Device option are
collected. By default only selected devices are collected if a
selection is made. If no selection is configured at all, all
devices are selected.

Plugin "tokyotyrant"
The "tokyotyrant plugin" connects to a TokyoTyrant server and collects
a couple metrics: number of records, and database size on disk.

Host Hostname/IP
The hostname or ip which identifies the server. Default: 127.0.0.1

Port Service/Port
The query port of the server. This needs to be a string, even if
the port is given in its numeric form. Default: 1978

Plugin "unixsock"
SocketFile Path
Sets the socket-file which is to be created.

SocketGroup Group
If running as root change the group of the UNIX-socket after it has
been created. Defaults to collectd.

Plugin "uuid"
This plugin, if loaded, causes the Hostname to be taken from the
machine's UUID. The UUID is a universally unique designation for the
machine, usually taken from the machine's BIOS. This is most useful if
the machine is running in a virtual environment such as Xen, in which
case the UUID is preserved across shutdowns and migration.

The following methods are used to find the machine's UUID, in order:

· Check /etc/uuid (or UUIDFile).

· Check for UUID from HAL
(<http://www.freedesktop.org/wiki/Software/hal>) if present.

· Check for UUID from "dmidecode" / SMBIOS.

· Check for UUID from Xen hypervisor.

If no UUID can be found then the hostname is not modified.

UUIDFile Path
Take the UUID from the given file (default /etc/uuid).

Plugin "vmem"
The "vmem" plugin collects information about the usage of virtual
memory. Since the statistics provided by the Linux kernel are very
detailed, they are collected very detailed. However, to get all the
details, you have to switch them on manually. Most people just want an
overview over, such as the number of pages read from swap space.

Verbose true|false
Enables verbose collection of information. This will start
collecting page "actions", e. g. page allocations, (de)activations,
steals and so on. Part of these statistics are collected on a "per
zone" basis.

Plugin "vserver"
This plugin doesn't have any options. VServer support is only available
for Linux. It cannot yet be found in a vanilla kernel, though. To make
use of this plugin you need a kernel that has VServer support built in,
i. e. you need to apply the patches and compile your own kernel, which
will then provide the /proc/virtual filesystem that is required by this
plugin.

The VServer homepage can be found at <http://linux-vserver.org/>.

Note: The traffic collected by this plugin accounts for the amount of
traffic passing a socket which might be a lot less than the actual on-
wire traffic (e. g. due to headers and retransmission). If you want to
collect on-wire traffic you could, for example, use the logging
facilities of iptables to feed data for the guest IPs into the iptables
plugin.

Plugin "write_http"
This output plugin submits values to an http server by POST them using
the PUTVAL plain-text protocol. Each destination you want to post data
to needs to have one URL block, within which the destination can be
configured further, for example by specifying authentication data.

Synopsis:

<Plugin "write_http">
<URL "http://example.com/post-collectd">
User "collectd"
Password "weCh3ik0"
</URL>
</Plugin>

URL blocks need one string argument which is used as the URL to which
data is posted. The following options are understood within URL blocks.

User Username
Optional user name needed for authentication.

Password Password
Optional password needed for authentication.

VerifyPeer true|false
Enable or disable peer SSL certificate verification. See
<http://curl.haxx.se/docs/sslcerts.html> for details. Enabled by
default.

Format Command|JSON
Format of the output to generate. If set to Command, will create
output that is understood by the Exec and UnixSock plugins. When
set to JSON, will create output in the JavaScript Object Notation
(JSON).

Defaults to Command.

StoreRates true|false
If set to true, convert counter values to rates. If set to false
(the default) counter values are stored as is, i. e. as an
increasing integer number.

THRESHOLD CONFIGURATION
Starting with version 4.3.0 collectd has support for monitoring. By
that we mean that the values are not only stored or sent somewhere, but
that they are judged and, if a problem is recognized, acted upon. The
only action collectd takes itself is to generate and dispatch a
"notification". Plugins can register to receive notifications and
perform appropriate further actions.

Since systems and what you expect them to do differ a lot, you can
configure thresholds for your values freely. This gives you a lot of
flexibility but also a lot of responsibility.

Every time a value is out of range a notification is dispatched. This
means that the idle percentage of your CPU needs to be less then the
configured threshold only once for a notification to be generated.
There's no such thing as a moving average or similar - at least not
now.

Also, all values that match a threshold are considered to be relevant
or "interesting". As a consequence collectd will issue a notification
if they are not received for Timeout iterations. The Timeout
configuration option is explained in section "GLOBAL OPTIONS". If, for
example, Timeout is set to "2" (the default) and some hosts sends it's
CPU statistics to the server every 60 seconds, a notification will be
dispatched after about 120 seconds. It may take a little longer because
the timeout is checked only once each Interval on the server.

When a value comes within range again or is received after it was
missing, an "OKAY-notification" is dispatched.

Here is a configuration example to get you started. Read below for more
information.

<Threshold>
<Type "foo">
WarningMin 0.00
WarningMax 1000.00
FailureMin 0.00
FailureMax 1200.00
Invert false
Instance "bar"
</Type>

<Plugin "interface">
Instance "eth0"
<Type "if_octets">
FailureMax 10000000
DataSource "rx"
</Type>
</Plugin>

<Host "hostname">
<Type "cpu">
Instance "idle"
FailureMin 10
</Type>

<Plugin "memory">
<Type "memory">
Instance "cached"
WarningMin 100000000
</Type>
</Plugin>
</Host>
</Threshold>

There are basically two types of configuration statements: The "Host",
"Plugin", and "Type" blocks select the value for which a threshold
should be configured. The "Plugin" and "Type" blocks may be specified
further using the "Instance" option. You can combine the block by
nesting the blocks, though they must be nested in the above order,
i. e. "Host" may contain either "Plugin" and "Type" blocks, "Plugin"
may only contain "Type" blocks and "Type" may not contain other blocks.
If multiple blocks apply to the same value the most specific block is
used.

The other statements specify the threshold to configure. They must be
included in a "Type" block. Currently the following statements are
recognized:

FailureMax Value
WarningMax Value
Sets the upper bound of acceptable values. If unset defaults to
positive infinity. If a value is greater than FailureMax a FAILURE
notification will be created. If the value is greater than
WarningMax but less than (or equal to) FailureMax a WARNING
notification will be created.

FailureMin Value
WarningMin Value
Sets the lower bound of acceptable values. If unset defaults to
negative infinity. If a value is less than FailureMin a FAILURE
notification will be created. If the value is less than WarningMin
but greater than (or equal to) FailureMin a WARNING notification
will be created.

DataSource DSName
Some data sets have more than one "data source". Interesting
examples are the "if_octets" data set, which has received ("rx")
and sent ("tx") bytes and the "disk_ops" data set, which holds
"read" and "write" operations. The system load data set, "load",
even has three data sources: "shortterm", "midterm", and
"longterm".

Normally, all data sources are checked against a configured
threshold. If this is undesirable, or if you want to specify
different limits for each data source, you can use the DataSource
option to have a threshold apply only to one data source.

Invert true|false
If set to true the range of acceptable values is inverted, i. e.
values between FailureMin and FailureMax (WarningMin and
WarningMax) are not okay. Defaults to false.

Persist true|false
Sets how often notifications are generated. If set to true one
notification will be generated for each value that is out of the
acceptable range. If set to false (the default) then a notification
is only generated if a value is out of range but the previous value
was okay.

This applies to missing values, too: If set to true a notification
about a missing value is generated once every Interval seconds. If
set to false only one such notification is generated until the
value appears again.

Percentage true|false
If set to true, the minimum and maximum values given are
interpreted as percentage value, relative to the other data
sources. This is helpful for example for the "df" type, where you
may want to issue a warning when less than 5 % of the total space
is available. Defaults to false.

FILTER CONFIGURATION
Starting with collectd 4.6 there is a powerful filtering infrastructure
implemented in the daemon. The concept has mostly been copied from
ip_tables, the packet filter infrastructure for Linux. We'll use a
similar terminology, so that users that are familiar with iptables feel
right at home.

Terminology
The following are the terms used in the remainder of the filter
configuration documentation. For an ASCII-art schema of the mechanism,
see "General structure" below.

Match
A match is a criteria to select specific values. Examples are, of
course, the name of the value or it's current value.

Matches are implemented in plugins which you have to load prior to
using the match. The name of such plugins starts with the "match_"
prefix.

Target
A target is some action that is to be performed with data. Such
actions could, for example, be to change part of the value's
identifier or to ignore the value completely.

Some of these targets are built into the daemon, see "Built-in
targets" below. Other targets are implemented in plugins which you
have to load prior to using the target. The name of such plugins
starts with the "target_" prefix.

Rule
The combination of any number of matches and at least one target is
called a rule. The target actions will be performed for all values
for which all matches apply. If the rule does not have any matches
associated with it, the target action will be performed for all
values.

Chain
A chain is a list of rules and possibly default targets. The rules
are tried in order and if one matches, the associated target will
be called. If a value is handled by a rule, it depends on the
target whether or not any subsequent rules are considered or if
traversal of the chain is aborted, see "Flow control" below. After
all rules have been checked, the default targets will be executed.

General structure
The following shows the resulting structure:

+---------+
! Chain !
+---------+
!
V
+---------+ +---------+ +---------+ +---------+
! Rule !->! Match !->! Match !->! Target !
+---------+ +---------+ +---------+ +---------+
!
V
+---------+ +---------+ +---------+
! Rule !->! Target !->! Target !
+---------+ +---------+ +---------+
!
V
:
:
!
V
+---------+ +---------+ +---------+
! Rule !->! Match !->! Target !
+---------+ +---------+ +---------+
!
V
+---------+
! Default !
! Target !
+---------+

Flow control
There are four ways to control which way a value takes through the
filter mechanism:

jump
The built-in jump target can be used to "call" another chain, i. e.
process the value with another chain. When the called chain
finishes, usually the next target or rule after the jump is
executed.

stop
The stop condition, signaled for example by the built-in target
stop, causes all processing of the value to be stopped immediately.

return
Causes processing in the current chain to be aborted, but
processing of the value generally will continue. This means that if
the chain was called via Jump, the next target or rule after the
jump will be executed. If the chain was not called by another
chain, control will be returned to the daemon and it may pass the
value to another chain.

continue
Most targets will signal the continue condition, meaning that
processing should continue normally. There is no special built-in
target for this condition.

Synopsis
The configuration reflects this structure directly:

PostCacheChain "PostCache"
<Chain "PostCache">
<Rule "ignore_mysql_show">
<Match "regex">
Plugin "^mysql$"
Type "^mysql_command$"
TypeInstance "^show_"
</Match>
<Target "stop">
</Target>
</Rule>
<Target "write">
Plugin "rrdtool"
</Target>
</Chain>

The above configuration example will ignore all values where the plugin
field is "mysql", the type is "mysql_command" and the type instance
begins with "show_". All other values will be sent to the "rrdtool"
write plugin via the default target of the chain. Since this chain is
run after the value has been added to the cache, the MySQL "show_*"
command statistics will be available via the "unixsock" plugin.

List of configuration options
PreCacheChain ChainName
PostCacheChain ChainName
Configure the name of the "pre-cache chain" and the "post-cache
chain". The argument is the name of a chain that should be executed
before and/or after the values have been added to the cache.

To understand the implications, it's important you know what is
going on inside collectd. The following diagram shows how values
are passed from the read-plugins to the write-plugins:

+---------------+
! Read-Plugin !
+-------+-------+
!
+ - - - - V - - - - +
: +---------------+ :
: ! Pre-Cache ! :
: ! Chain ! :
: +-------+-------+ :
: ! :
: V :
: +-------+-------+ : +---------------+
: ! Cache !--->! Value Cache !
: ! insert ! : +---+---+-------+
: +-------+-------+ : ! !
: ! ,------------' !
: V V : V
: +-------+---+---+ : +-------+-------+
: ! Post-Cache +--->! Write-Plugins !
: ! Chain ! : +---------------+
: +---------------+ :
: :
: dispatch values :
+ - - - - - - - - - +

After the values are passed from the "read" plugins to the dispatch
functions, the pre-cache chain is run first. The values are added
to the internal cache afterwards. The post-cache chain is run after
the values have been added to the cache. So why is it such a huge
deal if chains are run before or after the values have been added
to this cache?

Targets that change the identifier of a value list should be
executed before the values are added to the cache, so that the name
in the cache matches the name that is used in the "write" plugins.
The "unixsock" plugin, too, uses this cache to receive a list of
all available values. If you change the identifier after the value
list has been added to the cache, this may easily lead to
confusion, but it's not forbidden of course.

The cache is also used to convert counter values to rates. These
rates are, for example, used by the "value" match (see below). If
you use the rate stored in the cache before the new value is added,
you will use the old, previous rate. Write plugins may use this
rate, too, see the "csv" plugin, for example. The "unixsock"
plugin uses these rates too, to implement the "GETVAL" command.

Last but not last, the stop target makes a difference: If the pre-
cache chain returns the stop condition, the value will not be added
to the cache and the post-cache chain will not be run.

Chain Name
Adds a new chain with a certain name. This name can be used to
refer to a specific chain, for example to jump to it.

Within the Chain block, there can be Rule blocks and Target blocks.

Rule [Name]
Adds a new rule to the current chain. The name of the rule is
optional and currently has no meaning for the daemon.

Within the Rule block, there may be any number of Match blocks and
there must be at least one Target block.

Match Name
Adds a match to a Rule block. The name specifies what kind of match
should be performed. Available matches depend on the plugins that
have been loaded.

The arguments inside the Match block are passed to the plugin
implementing the match, so which arguments are valid here depends
on the plugin being used. If you do not need any to pass any
arguments to a match, you can use the shorter syntax:

Match "foobar"

Which is equivalent to:

Target Name
Add a target to a rule or a default target to a chain. The name
specifies what kind of target is to be added. Which targets are
available depends on the plugins being loaded.

The arguments inside the Target block are passed to the plugin
implementing the target, so which arguments are valid here depends
on the plugin being used. If you do not need any to pass any
arguments to a target, you can use the shorter syntax:

Target "stop"

This is the same as writing:

Built-in targets
The following targets are built into the core daemon and therefore need
no plugins to be loaded:

return
Signals the "return" condition, see the "Flow control" section
above. This causes the current chain to stop processing the value
and returns control to the calling chain. The calling chain will
continue processing targets and rules just after the jump target
(see below). This is very similar to the RETURN target of iptables,
see iptables(8).

This target does not have any options.

Example:

Target "return"

stop
Signals the "stop" condition, see the "Flow control" section above.
This causes processing of the value to be aborted immediately. This
is similar to the DROP target of iptables, see iptables(8).

This target does not have any options.

Example:

Target "stop"

write
Sends the value to "write" plugins.

Available options:

Plugin Name
Name of the write plugin to which the data should be sent. This
option may be given multiple times to send the data to more
than one write plugin.

If no plugin is explicitly specified, the values will be sent to
all available write plugins.

Example:

<Target "write">
Plugin "rrdtool"
</Target>

jump
Starts processing the rules of another chain, see "Flow control"
above. If the end of that chain is reached, or a stop condition is
encountered, processing will continue right after the jump target,
i. e. with the next target or the next rule. This is similar to the
-j command line option of iptables, see iptables(8).

Available options:

Chain Name
Jumps to the chain Name. This argument is required and may
appear only once.

Example:

<Target "jump">
Chain "foobar"
</Target>

Available matches
regex
Matches a value using regular expressions.

Available options:

Host Regex
Plugin Regex
PluginInstance Regex
Type Regex
TypeInstance Regex
Match values where the given regular expressions match the
various fields of the identifier of a value. If multiple
regular expressions are given, all regexen must match for a
value to match.

Invert false|true
When set to true, the result of the match is inverted, i.e. all
value lists where all regular expressions apply are not
matched, all other value lists are matched. Defaults to false.

Example:

<Match "regex">
Host "customer[0-9]+"
Plugin "^foobar$"
</Match>

timediff
Matches values that have a time which differs from the time on the
server.

This match is mainly intended for servers that receive values over
the "network" plugin and write them to disk using the "rrdtool"
plugin. RRDtool is very sensitive to the timestamp used when
updating the RRD files. In particular, the time must be ever
increasing. If a misbehaving client sends one packet with a
timestamp far in the future, all further packets with a correct
time will be ignored because of that one packet. What's worse, such
corrupted RRD files are hard to fix.

This match lets one match all values outside a specified time range
(relative to the server's time), so you can use the stop target
(see below) to ignore the value, for example.

Available options:

Future Seconds
Matches all values that are ahead of the server's time by
Seconds or more seconds. Set to zero for no limit. Either
Future or Past must be non-zero.

Past Seconds
Matches all values that are behind of the server's time by
Seconds or more seconds. Set to zero for no limit. Either
Future or Past must be non-zero.

Example:

<Match "timediff">
Future 300
Past 3600
</Match>

This example matches all values that are five minutes or more ahead
of the server or one hour (or more) lagging behind.

value
Matches the actual value of data sources against given minimum /
maximum values. If a data-set consists of more than one data-
source, all data-sources must match the specified ranges for a
positive match.

Available options:

Min Value
Sets the smallest value which still results in a match. If
unset, behaves like negative infinity.

Max Value
Sets the largest value which still results in a match. If
unset, behaves like positive infinity.

Invert true|false
Inverts the selection. If the Min and Max settings result in a
match, no-match is returned and vice versa. Please note that
the Invert setting only effects how Min and Max are applied to
a specific value. Especially the DataSource and Satisfy
settings (see below) are not inverted.

DataSource DSName [DSName ...]
Select one or more of the data sources. If no data source is
configured, all data sources will be checked. If the type
handled by the match does not have a data source of the
specified name(s), this will always result in no match
(independent of the Invert setting).

Satisfy Any|All
Specifies how checking with several data sources is performed.
If set to Any, the match succeeds if one of the data sources is
in the configured range. If set to All the match only succeeds
if all data sources are within the configured range. Default is
All.

Usually All is used for positive matches, Any is used for
negative matches. This means that with All you usually check
that all values are in a "good" range, while with Any you check
if any value is within a "bad" range (or outside the "good"
range).

Either Min or Max, but not both, may be unset.

Example:

# Match all values smaller than or equal to 100. Matches only if all data
# sources are below 100.
<Match "value">
Max 100
Satisfy "All"
</Match>

# Match if the value of any data source is outside the range of 0 - 100.
<Match "value">
Min 0
Max 100
Invert true
Satisfy "Any"
</Match>

empty_counter
Matches all values with one or more data sources of type COUNTER
and where all counter values are zero. These counters usually never
increased since they started existing (and are therefore
uninteresting), or got reset recently or overflowed and you had
really, really bad luck.

Please keep in mind that ignoring such counters can result in
confusing behavior: Counters which hardly ever increase will be
zero for long periods of time. If the counter is reset for some
reason (machine or service restarted, usually), the graph will be
empty (NAN) for a long time. People may not understand why.

hashed
Calculates a hash value of the host name and matches values
according to that hash value. This makes it possible to divide all
hosts into groups and match only values that are in a specific
group. The intended use is in load balancing, where you want to
handle only part of all data and leave the rest for other servers.

The hashing function used tries to distribute the hosts evenly.
First, it calculates a 32 bit hash value using the characters of
the hostname:

hash_value = 0;
for (i = 0; host[i] != 0; i++)
hash_value = (hash_value * 251) + host[i];

The constant 251 is a prime number which is supposed to make this
hash value more random. The code then checks the group for this
host according to the Total and Match arguments:

if ((hash_value % Total) == Match)
matches;
else
does not match;

Please note that when you set Total to two (i. e. you have only two
groups), then the least significant bit of the hash value will be
the XOR of all least significant bits in the host name. One
consequence is that when you have two hosts, "server0.example.com"
and "server1.example.com", where the host name differs in one digit
only and the digits differ by one, those hosts will never end up in
the same group.

Available options:

Match Match Total
Divide the data into Total groups and match all hosts in group
Match as described above. The groups are numbered from zero,
i. e. Match must be smaller than Total. Total must be at least
one, although only values greater than one really do make any
sense.

You can repeat this option to match multiple groups, for
example:

Match 3 7
Match 5 7

The above config will divide the data into seven groups and
match groups three and five. One use would be to keep every
value on two hosts so that if one fails the missing data can
later be reconstructed from the second host.

Example:

# Operate on the pre-cache chain, so that ignored values are not even in the
# global cache.
<Chain "PreCache">
<Rule>
<Match "hashed">
# Divide all received hosts in seven groups and accept all hosts in
# group three.
Match 3 7
</Match>
# If matched: Return and continue.
Target "return"
</Rule>
# If not matched: Return and stop.
Target "stop"
</Chain>

Available targets
notification
Creates and dispatches a notification.

Available options:

Message String
This required option sets the message of the notification. The
following placeholders will be replaced by an appropriate
value:

%{host}
%{plugin}
%{plugin_instance}
%{type}
%{type_instance}
These placeholders are replaced by the identifier field of
the same name.

%{ds:name}
These placeholders are replaced by a (hopefully) human
readable representation of the current rate of this data
source. If you changed the instance name (using the set or
replace targets, see below), it may not be possible to
convert counter values to rates.

Please note that these placeholders are case sensitive!

Severity "FATAL"|"WARNING"|"OKAY"
Sets the severity of the message. If omitted, the severity
"WARNING" is used.

Example:

<Target "notification">
Message "Oops, the %{type_instance} temperature is currently %{ds:value}!"
Severity "WARNING"
</Target>

replace
Replaces parts of the identifier using regular expressions.

Available options:

Host Regex Replacement
Plugin Regex Replacement
PluginInstance Regex Replacement
TypeInstance Regex Replacement
Match the appropriate field with the given regular expression
Regex. If the regular expression matches, that part that
matches is replaced with Replacement. If multiple places of the
input buffer match a given regular expression, only the first
occurrence will be replaced.

You can specify each option multiple times to use multiple
regular expressions one after another.

Example:

<Target "replace">
# Replace "example.net" with "example.com"
Host "\\<example.net\\>" "example.com"

# Strip "www." from hostnames
Host "\\<www\\." ""
</Target>

set Sets part of the identifier of a value to a given string.

Available options:

Host String
Plugin String
PluginInstance String
TypeInstance String
Set the appropriate field to the given string. The strings for
plugin instance and type instance may be empty, the strings for
host and plugin may not be empty. It's currently not possible
to set the type of a value this way.

Example:

<Target "set">
PluginInstance "coretemp"
TypeInstance "core3"
</Target>

Backwards compatibility
If you use collectd with an old configuration, i. e. one without a
Chain block, it will behave as it used to. This is equivalent to the
following configuration:

<Chain "PostCache">
Target "write"
</Chain>

If you specify a PostCacheChain, the write target will not be added
anywhere and you will have to make sure that it is called where
appropriate. We suggest to add the above snippet as default target to
your "PostCache" chain.

Examples
Ignore all values, where the hostname does not contain a dot, i. e.
can't be an FQDN.

<Chain "PreCache">
<Rule "no_fqdn">
<Match "regex">
Host "^[^\.]*$"
</Match>
Target "stop"
</Rule>
Target "write"
</Chain>

SEE ALSO
collectd(1), collectd-exec(5), collectd-perl(5), collectd-unixsock(5),
types.db(5), hddtemp(8), iptables(8), kstat(3KSTAT), mbmon(1), psql(1),
regex(7), rrdtool(1), sensors(1)

AUTHOR
Florian Forster <octo@verplant.org>

4.10.4 2011-10-14 COLLECTD.CONF(5)

[top]

List of man pages available for Fedora

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]

Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................

Vote for polarhome