clamd.conf(5) Clam AntiVirus clamd.conf(5)NAMEclamd.conf - Configuration file for Clam AntiVirus Daemon
DESCRIPTIONclamd.conf configures the Clam AntiVirus daemon, clamd(8).
FILE FORMAT
The file consists of comments and options with arguments. Each line
which starts with a hash (#) symbol is ignored by the parser. Options
and arguments are case sensitive and of the form Option Argument. The
arguments are of the following types:
BOOL Boolean value (yes/no or true/false or 1/0).
STRING String without blank characters.
SIZE Size in bytes. You can use 'M' or 'm' modifiers for megabytes
and 'K' or 'k' for kilobytes. To specify the size in bytes just
don't use modifiers.
NUMBER Unsigned integer.
DIRECTIVES
When some option is not used (commented out or not included in the con‐
figuration file at all) clamd takes a default action.
Example
If this option is set clamd will not run.
LogFile STRING
Save all reports to a log file.
Default: disabled
LogFileUnlock BOOL
By default the log file is locked for writing and only a single
daemon process can write to it. This option disables the lock.
Default: no
LogFileMaxSize SIZE
Maximum size of the log file.
Value of 0 disables the limit.
Default: 1048576
LogTime BOOL
Log time for each message.
Default: no
LogClean BOOL
Log all clean files.
Useful in debugging but drastically increases the log size.
Default: no
LogSyslog BOOL
Use the system logger (can work together with LogFile).
Default: no
LogFacility STRING
Type of syslog messages
Please refer to 'man syslog' for facility names.
Default: LOG_LOCAL6
LogVerbose BOOL
Enable verbose logging.
Default: no
LogRotate BOOL
Rotate log file. Requires LogFileMaxSize option set prior to
this option.
Default: no
ExtendedDetectionInfo BOOL
Log additional information about the infected file, such as its
size and hash, together with the virus name.
Default: no
PidFile STRING
Save the process identifier of a listening daemon (main thread)
to a specified file.
Default: disabled
TemporaryDirectory STRING
This option allows you to change the default temporary direc‐
tory.
Default: system specific (usually /tmp or /var/tmp).
DatabaseDirectory STRING
This option allows you to change the default database directory.
If you enable it, please make sure it points to the same direc‐
tory in both clamd and freshclam.
Default: defined at configuration (/usr/local/share/clamav)
OfficialDatabaseOnly BOOL
Only load the official signatures published by the ClamAV
project.
Default: no
LocalSocket STRING
Path to a local (Unix) socket the daemon will listen on.
Default: disabled
LocalSocketGroup STRING
Sets the group ownership on the unix socket.
Default: the primary group of the user running clamd
LocalSocketMode STRING
Sets the permissions on the unix socket to the specified mode.
Default: socket is world readable and writable
FixStaleSocket BOOL
Remove stale socket after unclean shutdown.
Default: yes
TCPSocket NUMBER
TCP port number the daemon will listen on.
Default: disabled
TCPAddr STRING
By default clamd binds to INADDR_ANY.
This option allows you to restrict the TCP address and provide
some degree of protection from the outside world. This option
can be specified multiple times in order to listen on multiple
IPs. IPv6 is now supported.
Default: disabled
MaxConnectionQueueLength NUMBER
Maximum length the queue of pending connections may grow to.
Default: 200
StreamMaxLength SIZE
Close the STREAM session when the data size limit is exceeded.
The value should match your MTA's limit for the maximum attach‐
ment size.
Default: 25M
StreamMinPort NUMBER
The STREAM command uses an FTP-like protocol.
This option sets the lower boundary for the port range.
Default: 1024
StreamMaxPort NUMBER
This option sets the upper boundary for the port range.
Default: 2048
MaxThreads NUMBER
Maximum number of threads running at the same time.
Default: 10
ReadTimeout NUMBER
This option specifies the time (in seconds) after which clamd
should timeout if a client doesn't provide any data.
Default: 120
CommandReadTimeout NUMBER
This option specifies the time (in seconds) after which clamd
should timeout if a client doesn't provide any initial command
after connecting. Note: the timeout for subsequents commands,
and/or data chunks is specified by ReadTimeout.
Default: 5
SendBufTimeout NUMBER
This option specifies how long to wait (in milliseconds) if the
send buffer is full. Keep this value low to prevent clamd hang‐
ing.
Default: 500
MaxQueue NUMBER
Maximum number of queued items (including those being processed
by MaxThreads threads). It is recommended to have this value at
least twice MaxThreads if possible.
WARNING: you shouldn't increase this too much to avoid running
out of file descriptors, the following condition should hold:
MaxThreads*MaxRecursion + MaxQueue - MaxThreads + 6 <
RLIMIT_NOFILE. RLIMIT_NOFILE is the maximum number of open file
descriptors (usually 1024), set by ulimit -n.
Default: 100
IdleTimeout NUMBER
This option specifies how long (in seconds) the process should
wait for a new job.
Default: 30
ExcludePath REGEX
Don't scan files and directories matching REGEX. This directive
can be used multiple times.
Default: disabled
MaxDirectoryRecursion NUMBER
Maximum depth directories are scanned at.
Default: 15
FollowDirectorySymlinks BOOL
Follow directory symlinks.
Default: no
CrossFilesystems BOOL
Scan files and directories on other filesystems.
Default: yes
FollowFileSymlinks BOOL
Follow regular file symlinks.
Default: no
SelfCheck NUMBER
This option specifies the time intervals (in seconds) in which
clamd should perform a database check.
Default: 600
VirusEvent COMMAND
Execute a command when a virus is found. In the command string
%v will be replaced with the virus name. Additionally, two envi‐
ronment variables will be defined: $CLAM_VIRUSEVENT_FILENAME and
$CLAM_VIRUSEVENT_VIRUSNAME.
Default: disabled
ExitOnOOM BOOL
Stop daemon when libclamav reports out of memory condition.
Default: no
AllowAllMatchScan BOOL
Permit use of the ALLMATCHSCAN command.
Default: yes
Foreground BOOL
Don't fork into background.
Default: no
Debug BOOL
Enable debug messages from libclamav.
Default: no
LeaveTemporaryFiles BOOL
Do not remove temporary files (for debugging purpose).
Default: no
User STRING
Run the daemon as a specified user (the process must be started
by root).
Default: disabled
AllowSupplementaryGroups BOOL
Initialize a supplementary group access (the process must be
started by root).
Default: no
Bytecode BOOL
With this option enabled ClamAV will load bytecode from the
database. It is highly recommended you keep this option turned
on, otherwise you may miss detections for many new viruses.
Default: yes
BytecodeSecurity STRING
Set bytecode security level.
Possible values:
TrustSigned - trust bytecode loaded from signed .c[lv]d
files and insert runtime safety checks for bytecode loaded
from other sources,
Paranoid - don't trust any bytecode, insert runtime checks
for all.
Recommended: TrustSigned, because bytecode in .cvd files already
has these checks.
Default: TrustSigned
BytecodeTimeout NUMBER
Set bytecode timeout in milliseconds.
Default: 5000
BytecodeUnsigned BOOL
Allow loading bytecode from outside digitally signed .c[lv]d
files.
Default: no
BytecodeMode STRING
Set bytecode execution mode.
Possible values:
Auto - automatically choose JIT if possible, fallback to
interpreter
ForceJIT - always choose JIT, fail if not possible
ForceIntepreter - always choose interpreter
Test - run with both JIT and interpreter and compare
results. Make all failures fatal.
Default: Auto
DetectPUA BOOL
Detect Possibly Unwanted Applications.
Default: No
ExcludePUA CATEGORY
Exclude a specific PUA category. This directive can be used mul‐
tiple times. See http://www.clamav.net/support/pua for the com‐
plete list of PUA categories.
Default: disabled
IncludePUA CATEGORY
Only include a specific PUA category. This directive can be used
multiple times. See http://www.clamav.net/support/pua for the
complete list of PUA categories.
Default: disabled
AlgorithmicDetection BOOL
In some cases (eg. complex malware, exploits in graphic files,
and others), ClamAV uses special algorithms to provide accurate
detection. This option controls the algorithmic detection.
Default: yes
ScanPE BOOL
PE stands for Portable Executable - it's an executable file for‐
mat used in all 32 and 64-bit versions of Windows operating sys‐
tems. This option allows ClamAV to perform a deeper analysis of
executable files and it's also required for decompression of
popular executable packers such as UPX.
If you turn off this option, the original files will still be
scanned, but without additional processing.
Default: yes
ScanELF BOOL
Executable and Linking Format is a standard format for UN*X exe‐
cutables. This option allows you to control the scanning of ELF
files.
If you turn off this option, the original files will still be
scanned, but without additional processing.
Default: yes
DetectBrokenExecutables BOOL
With this option clamd will try to detect broken executables
(both PE and ELF) and mark them as Broken.Executable.
Default: no
ScanMail BOOL
Enable scanning of mail files.
If you turn off this option, the original files will still be
scanned, but without parsing individual messages/attachments.
Default: yes
ScanPartialMessages BOOL
Scan RFC1341 messages split over many emails. You will need to
periodically clean up $TemporaryDirectory/clamav-partial direc‐
tory. WARNING: This option may open your system to a DoS attack.
Never use it on loaded servers.
Default: no
MailMaxRecursion (OBSOLETE)
WARNING: This option is no longer accepted. See MaxRecursion.
PhishingSignatures BOOL
With this option enabled ClamAV will try to detect phishing
attempts by using signatures.
Default: yes
PhishingScanURLs BOOL
Scan URLs found in mails for phishing attempts using heuristics.
This will classify "Possibly Unwanted" phishing emails as Phish‐
ing.Heuristics.Email.*
Default: yes
PhishingAlwaysBlockCloak BOOL
Always block cloaked URLs, even if URL isn't in database. This
can lead to false positives.
Default: no
PhishingAlwaysBlockSSLMismatch BOOL
Always block SSL mismatches in URLs, even if the URL isn't in
the database. This can lead to false positives.
Default: no
PartitionIntersection BOOL
Detect partition intersections in raw disk images using heuris‐
tics.
Default: no
HeuristicScanPrecedence BOOL
Allow heuristic match to take precedence. When enabled, if a
heuristic scan (such as phishingScan) detects a possible
virus/phishing it will stop scanning immediately. Recommended,
saves CPU scan-time. When disabled, virus/phishing detected by
heuristic scans will be reported only at the end of a scan. If
an archive contains both a heuristically detected virus/phish‐
ing, and a real malware, the real malware will be reported. Keep
this disabled if you intend to handle "*.Heuristics.*" viruses
differently from "real" malware. If a non-heuristically-detected
virus (signature-based) is found first, the scan is interrupted
immediately, regardless of this config option.
Default: no
StructuredDataDetection BOOL
Enable the DLP module.
Default: no
StructuredMinCreditCardCount NUMBER
This option sets the lowest number of Credit Card numbers found
in a file to generate a detect.
Default: 3
StructuredMinSSNCount NUMBER
This option sets the lowest number of Social Security Numbers
found in a file to generate a detect.
Default: 3
StructuredSSNFormatNormal BOOL
With this option enabled the DLP module will search for valid
SSNs formatted as xxx-yy-zzzz.
Default: Yes
StructuredSSNFormatStripped BOOL
With this option enabled the DLP module will search for valid
SSNs formatted as xxxyyzzzz.
Default: No
ScanHTML BOOL
Perform HTML/JavaScript/ScriptEncoder normalisation and decryp‐
tion.
If you turn off this option, the original files will still be
scanned, but without additional processing.
Default: yes
ScanOLE2 BOOL
This option enables scanning of OLE2 files, such as Microsoft
Office documents and .msi files.
If you turn off this option, the original files will still be
scanned, but without additional processing.
Default: yes
OLE2BlockMacros BOOL
With this option enabled OLE2 files with VBA macros, which were
not detected by signatures will be marked as "Heuris‐
tics.OLE2.ContainsMacros".
Default: no
ScanPDF BOOL
This option enables scanning within PDF files.
If you turn off this option, the original files will still be
scanned, but without additional processing.
Default: yes
ScanSWF BOOL
This option enables scanning within SWF files.
If you turn off this option, the original files will still be
scanned, but without decoding and additional processing.
Default: yes
ScanArchive BOOL
Scan within archives and compressed files.
If you turn off this option, the original files will still be
scanned, but without unpacking and additional processing.
Default: yes
ArchiveBlockEncrypted BOOL
Mark encrypted archives as viruses (Encrypted.Zip,
Encrypted.RAR).
Default: no
ForceToDisk
This option causes memory or nested map scans to dump the con‐
tent to disk.
If you turn on this option, more data is written to disk and is
available when the leave-temps option is enabled at the cost of
more disk writes.
Default: no
ArchiveMaxFileSize (OBSOLETE)
WARNING: This option is no longer accepted. See MaxFileSize and
MaxScanSize.
ArchiveMaxRecursion (OBSOLETE)
WARNING: This option is no longer accepted. See MaxRecursion.
ArchiveMaxFiles (OBSOLETE)
WARNING: This option is no longer accepted. See MaxFiles.
ArchiveMaxCompressionRatio (OBSOLETE)
WARNING: This option is no longer accepted.
ArchiveBlockMax (OBSOLETE)
WARNING: This option is no longer accepted.
ArchiveLimitMemoryUsage (OBSOLETE)
WARNING: This option is no longer accepted.
Default: no
MaxScanSize SIZE
Sets the maximum amount of data to be scanned for each input
file. Archives and other containers are recursively extracted
and scanned up to this value. The size of an archive plus the
sum of the sizes of all files within archive count toward the
scan size. For example, a 1M uncompressed archive containing a
single 1M inner file counts as 2M toward the max scan size.
Warning: disabling this limit or setting it too high may result
in severe damage to the system.
Default: 100M
MaxFileSize SIZE
Files larger than this limit won't be scanned. Affects the input
file itself as well as files contained inside it (when the input
file is an archive, a document or some other kind of container).
Warning: disabling this limit or setting it too high may result
in severe damage to the system.
Default: 25M
MaxRecursion NUMBER
Nested archives are scanned recursively, e.g. if a Zip archive
contains a RAR file, all files within it will also be scanned.
This options specifies how deeply the process should be contin‐
ued. Warning: setting this limit too high may result in severe
damage to the system.
Default: 16
MaxFiles NUMBER
Number of files to be scanned within an archive, a document, or
any other kind of container. Warning: disabling this limit or
setting it too high may result in severe damage to the system.
Default: 10000
MaxEmbeddedPE SIZE
This option sets the maximum size of a file to check for embed‐
ded PE.
Files larger than this value will skip the additional analysis
step.
Negative values are not allowed.
Default: 10M
MaxHTMLNormalize SIZE
This option sets the maximum size of a HTML file to normalize.
HTML files larger than this value will not be normalized or
scanned.
Negative values are not allowed.
Default: 10M
MaxHTMLNoTags SIZE
This option sets the maximum size of a normalized HTML file to
scan.
HTML files larger than this value after normalization will not
be scanned.
Negative values are not allowed.
Default: 2M
MaxScriptNormalize SIZE
This option sets the maximum size of a script file to normalize.
Script content larger than this value will not be normalized or
scanned.
Negative values are not allowed.
Default: 5M
MaxZipTypeRcg SIZE
This option sets the maximum size of a ZIP file to reanalyze
type recognition.
ZIP files larger than this value will skip the step to poten‐
tially reanalyze as PE.
Negative values are not allowed.
WARNING: setting this limit too high may result in severe damage
or impact performance.
Default: 1M
MaxPartitions SIZE
This option sets the maximum number of partitions of a raw disk
image to be scanned.
Raw disk images with more partitions than this value will have
up to the value partitions scanned.
Negative values are not allowed.
WARNING: setting this limit too high may result in severe damage
or impact performance.
Default: 50
MaxIconsPE SIZE
This option sets the maximum number of icons within a PE to be
scanned.
PE files with more icons than this value will have up to the
value number icons scanned.
Negative values are not allowed.
WARNING: setting this limit too high may result in severe damage
or impact performance.
Default: 100
ClamukoScanOnAccess (OBSOLETE)
WARNING: This option is no longer accepted. See ScanOnAccess.
ClamukoScannerCount (OBSOLETE)
WARNING: This option is no longer accepted.
ClamukoScanOnOpen (OBSOLETE)
WARNING: This option is no longer accepted.
ClamukoScanOnClose (OBSOLETE)
WARNING: This option is no longer accepted.
ClamukoScanOnExec (OBSOLETE)
WARNING: This option is no longer accepted.
ClamukoIncludePath (OBSOLETE)
WARNING: This option is no longer accepted. See OnAccessInclude‐
Path.
ClamukoExcludePath (OBSOLETE)
WARNING: This option is no longer accepted. See OnAccessExclude‐
Path.
ClamukoExcludeUID (OBSOLETE)
WARNING: This option is no longer accepted. See OnAccessEx‐
cludeUID.
ClamukoMaxFileSize (OBSOLETE)
WARNING: This option is no longer accepted. See OnAccessMaxFile‐
Size.
ScanOnAccess BOOL
This option enables on-access scanning (Linux only)
Default: disabled
OnAccessIncludePath STRING
This option specifies a directory (including all files and
directories inside it), which should be scanned on access. This
option can be used multiple times.
Default: disabled
OnAccessExcludePath STRING
This option allows excluding directories from on-access scan‐
ning. It can be used multiple times.
Default: disabled
OnAccessExcludeUID NUMBER
With this option you can whitelist specific UIDs. Processes with
these UIDs will be able to access all files.
This option can be used multiple times (one per line).
Default: disabled
OnAccessMaxFileSize SIZE
Files larger than this value will not be scanned in on access.
Default: 5M
DisableCertCheck BOOL
Disable authenticode certificate chain verification in PE files.
Default: no
StatsEnabled BOOL
Enable submission of statistical data
Default: no
StatsHostID STRING
HostID in the form of an UUID to use when submitting statistical
information.
Default: auto
StatsPEDisabled BOOL
Disable submission of PE section statistical data.
Default: no
StatsTimeout NUMBER
Timeout in seconds to timeout communication with the stats
server.
Default: 10
NOTES
All options expressing a size are limited to max 4GB. Values in excess
will be resetted to the maximum.
FILES
/etc/clamav/clamd.conf
AUTHORS
Tomasz Kojm <tkojm@clamav.net>, Kevin Lin <klin@sourcefire.com>
SEE ALSOclamd(8), clamdscan(1), clamav-milter(8), freshclam(1), fresh‐
clam.conf(5)ClamAV 0.98.3 December 4, 2013 clamd.conf(5)
