CHSEIN(3F)CHSEIN(3F)NAME
CHSEIN - use inverse iteration to find specified right and/or left
eigenvectors of a complex upper Hessenberg matrix H
SYNOPSIS
SUBROUTINE CHSEIN( SIDE, EIGSRC, INITV, SELECT, N, H, LDH, W, VL, LDVL,
VR, LDVR, MM, M, WORK, RWORK, IFAILL, IFAILR, INFO )
CHARACTER EIGSRC, INITV, SIDE
INTEGER INFO, LDH, LDVL, LDVR, M, MM, N
LOGICAL SELECT( * )
INTEGER IFAILL( * ), IFAILR( * )
REAL RWORK( * )
COMPLEX H( LDH, * ), VL( LDVL, * ), VR( LDVR, * ), W( * ),
WORK( * )
PURPOSE
CHSEIN uses inverse iteration to find specified right and/or left
eigenvectors of a complex upper Hessenberg matrix H.
The right eigenvector x and the left eigenvector y of the matrix H
corresponding to an eigenvalue w are defined by:
H * x = w * x, y**h * H = w * y**h
where y**h denotes the conjugate transpose of the vector y.
ARGUMENTS
SIDE (input) CHARACTER*1
= 'R': compute right eigenvectors only;
= 'L': compute left eigenvectors only;
= 'B': compute both right and left eigenvectors.
EIGSRC (input) CHARACTER*1
Specifies the source of eigenvalues supplied in W:
= 'Q': the eigenvalues were found using CHSEQR; thus, if H has
zero subdiagonal elements, and so is block-triangular, then the
j-th eigenvalue can be assumed to be an eigenvalue of the block
containing the j-th row/column. This property allows CHSEIN to
perform inverse iteration on just one diagonal block. = 'N': no
assumptions are made on the correspondence between eigenvalues
and diagonal blocks. In this case, CHSEIN must always perform
inverse iteration using the whole matrix H.
Page 1
CHSEIN(3F)CHSEIN(3F)
INITV (input) CHARACTER*1
= 'N': no initial vectors are supplied;
= 'U': user-supplied initial vectors are stored in the arrays VL
and/or VR.
SELECT (input) LOGICAL array, dimension (N)
Specifies the eigenvectors to be computed. To select the
eigenvector corresponding to the eigenvalue W(j), SELECT(j) must
be set to .TRUE..
N (input) INTEGER
The order of the matrix H. N >= 0.
H (input) COMPLEX array, dimension (LDH,N)
The upper Hessenberg matrix H.
LDH (input) INTEGER
The leading dimension of the array H. LDH >= max(1,N).
W (input/output) COMPLEX array, dimension (N)
On entry, the eigenvalues of H. On exit, the real parts of W may
have been altered since close eigenvalues are perturbed slightly
in searching for independent eigenvectors.
VL (input/output) COMPLEX array, dimension (LDVL,MM)
On entry, if INITV = 'U' and SIDE = 'L' or 'B', VL must contain
starting vectors for the inverse iteration for the left
eigenvectors; the starting vector for each eigenvector must be in
the same column in which the eigenvector will be stored. On
exit, if SIDE = 'L' or 'B', the left eigenvectors specified by
SELECT will be stored consecutively in the columns of VL, in the
same order as their eigenvalues. If SIDE = 'R', VL is not
referenced.
LDVL (input) INTEGER
The leading dimension of the array VL. LDVL >= max(1,N) if SIDE
= 'L' or 'B'; LDVL >= 1 otherwise.
VR (input/output) COMPLEX array, dimension (LDVR,MM)
On entry, if INITV = 'U' and SIDE = 'R' or 'B', VR must contain
starting vectors for the inverse iteration for the right
eigenvectors; the starting vector for each eigenvector must be in
the same column in which the eigenvector will be stored. On
exit, if SIDE = 'R' or 'B', the right eigenvectors specified by
SELECT will be stored consecutively in the columns of VR, in the
same order as their eigenvalues. If SIDE = 'L', VR is not
referenced.
LDVR (input) INTEGER
The leading dimension of the array VR. LDVR >= max(1,N) if SIDE
= 'R' or 'B'; LDVR >= 1 otherwise.
Page 2
CHSEIN(3F)CHSEIN(3F)
MM (input) INTEGER
The number of columns in the arrays VL and/or VR. MM >= M.
M (output) INTEGER
The number of columns in the arrays VL and/or VR required to
store the eigenvectors (= the number of .TRUE. elements in
SELECT).
WORK (workspace) COMPLEX array, dimension (N*N)
RWORK (workspace) REAL array, dimension (N)
IFAILL (output) INTEGER array, dimension (MM)
If SIDE = 'L' or 'B', IFAILL(i) = j > 0 if the left eigenvector
in the i-th column of VL (corresponding to the eigenvalue w(j))
failed to converge; IFAILL(i) = 0 if the eigenvector converged
satisfactorily. If SIDE = 'R', IFAILL is not referenced.
IFAILR (output) INTEGER array, dimension (MM)
If SIDE = 'R' or 'B', IFAILR(i) = j > 0 if the right eigenvector
in the i-th column of VR (corresponding to the eigenvalue w(j))
failed to converge; IFAILR(i) = 0 if the eigenvector converged
satisfactorily. If SIDE = 'L', IFAILR is not referenced.
INFO (output) INTEGER
= 0: successful exit
< 0: if INFO = -i, the i-th argument had an illegal value
> 0: if INFO = i, i is the number of eigenvectors which failed
to converge; see IFAILL and IFAILR for further details.
FURTHER DETAILS
Each eigenvector is normalized so that the element of largest magnitude
has magnitude 1; here the magnitude of a complex number (x,y) is taken to
be |x|+|y|.
Page 3
