chilli-radius man page on Alpinelinux

Man page or keyword search:  
man Server   18016 pages
apropos Keyword Search (all sections)
Output format
Alpinelinux logo
[printable version]

chilli-radius(5)					      chilli-radius(5)

NAME
       chilli-radius -	Information about RADIUS in chilli

DESCRIPTION
       chilli  uses  RADIUS  for access provisioning and statistics. Standards
       and best practices defined in RFCs are followed as best possible.  How‐
       ever,  chilli does take some liberties and bends the rules in places to
       better adapt to the more dynamic application of captive portals.

       See http://www.coova.org/CoovaChilli/RADIUS for details.

ATTRIBUTES
       The RADIUS Attributes used by chilli and a short description:

       User-name (1)
	      Full username as entered by the user.

       User-Password (2)
	      Used for UAM as alternative to CHAP-Password and CHAP-Challenge.

       CHAP-Password (3)
	      Used for UAM CHAP Authentication

       CHAP-Challenge (60)
	      Used for UAM CHAP Authentication

       EAP-Message (79)
	      Used for WPA Authentication

       NAS-IP-Address (4)
	      IP address of Chilli (set by the ''nasip''  or  ''radiuslisten''
	      option, and otherwise "0.0.0.0")

       Service-Type (6)
	      Set  to  Login  (1)  for	normal	authentication	requests.  The
	      Access-Accept message from the radius server  for	 configuration
	      management messages must also be set to Administrative-User.

       Framed-IP-Address (8)
	      IP address of the user, which is configurable during MAC authen‐
	      tication in the Access-Accept.

       Framed-IP-Netmask (9)
	      IP netmask of the user, which is configurable during MAC authen‐
	      tication in the Access-Accept.

       Filter-ID (11)
	      Filter ID pass on to scripts possibly.

       Reply-Message (18)
	      Reason of reject if present.

       State (24)
	      Sent to chilli in Access-Accept or Access-Challenge. Used trans‐
	      parently in subsequent Access-Request.

       Class (25)
	      Copied transparently by chilli from Access-Accept to Accounting-
	      Request.

       Session-Timeout (27)
	      Logout once session timeout is reached (seconds)

       Idle-Timeout (28)
	      Logout once idle timeout is reached (seconds)

       Called-Station-ID (30)
	      Set to the ''nasmac'' option or the MAC address of chilli.

       Calling-Station-ID (31)
	      MAC address of client

       NAS-Identifier (32)
	      Set to radiusnasid option if present.

       Acct-Status-Type (40)
	      1=Start, 2=Stop, 3=Interim-Update

       Acct-Input-Octets (42)
	      Number of octets received from client.

       Acct-Output-Octets (43)
	      Number of octets transmitted to client.

       Acct-Session-ID (44)
	      Unique  ID  to  link  Access-Request and Accounting-Request mes‐
	      sages.

       Acct-Session-Time (46)
	      Session duration in seconds.

       Acct-Input-Packets (47)
	      Number of packets received from client.

       Acct-Output-Packets (48)
	      Number of packets transmitted to client.

       Acct-Terminate-Cause (49)
	      1=User-Request, 2=Lost-Carrier, 4=Idle-Timeout,  5=Session-Time‐
	      out, 11=NAS-Reboot

       Acct-Input-Gigawords (52)
	      Number  of  times	 the  Acct-Input-Octets	 counter  has  wrapped
	      around.

       Acct-Output-Gigawords (53)
	      Number of	 times	the  Acct-Output-Octets	 counter  has  wrapped
	      around.

       NAS-Port-Type (61)
	      19=Wireless-IEEE-802.11

       Message-Authenticator (80)
	      Is  always  included  in	Access-Request.	 If present in Access-
	      Accept, Access-Challenge or Access-reject chilli	will  validate
	      that the Message-Authenticator is correct.

       Acct-Interim-Interval (85)
	      If   present  in	Access-Accept  chilli  will  generate  interim
	      accounting records with the specified interval (seconds).

       WISPr-Location-ID (14122, 1)
	      Location ID is set to the radiuslocationid  option  if  present.
	      Should	be    in    the	   format:   isocc=<ISO_Country_Code>,
	      cc=<E.164_Country_Code>,	     ac=<E.164_Area_Code>,	  net‐
	      work=<ssid/ZONE>

       WISPr-Location-Name (14122, 2)
	      Location	Name  is  set  to  the	radiuslocationname  option  if
	      present. Should be in the format: <OPERATOR_NAME>,<LOCATION>

       WISPr-Logoff-URL (14122, 3)
	      Included in Access-Request to notify the operator of the log off
	      URL. Defaults to "http://uamlisten:uamport/logoff".

       WISPr-Redirection-URL (14122, 4)
	      If  present  the	client	will  be  redirected  to this URL once
	      authenticated. This URL should include a link  to	 WISPr-Logoff-
	      URL in order to enable the client to log off.

       WISPr-Bandwidth-Max-Up (14122, 7)
	      Maximum transmit rate (b/s). Limits the bandwidth of the connec‐
	      tion. Note that this attribute is specified in bits per second.

       WISPr-Bandwidth-Max-Down (14122, 8)
	      Maximum receive rate (b/s). Limits the bandwidth of the  connec‐
	      tion. Note that this attribute is specified in bits per second.

       WISPr-Session-Terminate-Time (14122, 9)
	      The time when the user should be disconnected in ISO 8601 format
	      (YYYY-MM-DDThh:mm:ssTZD). If TZD is not specified local time  is
	      assumed. For example a disconnect on 18 December 2001 at 7:00 PM
	      UTC would be specified as 2001-12-18T19:00:00+00:00.

       ChilliSpot-Max-Input-Octets (14559, 1)
	      Maximum number of octets the user is allowed to transmit.	 After
	      this limit has been reached the user will be disconnected.

       ChilliSpot-Max-Output-Octets (14559, 2)
	      Maximum  number  of octets the user is allowed to receive. After
	      this limit has been reached the user will be disconnected.

       ChilliSpot-Max-Total-Octets (14559, 3)
	      Maximum total octets the user is allowed	to  send  or  receive.
	      After this limit has been reached the user will be disconnected.

       ChilliSpot-Bandwidth-Max-Up (14559, 4)
	      Maximum bandwidth up

       ChilliSpot-Bandwidth-Max-Down (14559, 5)
	      Maximum bandwidth down

       ChilliSpot-Config (14559, 6)
	      Configurations  passed between chilli and back-end as name value
	      pairs

       ChilliSpot-Lang (14559, 7)
	      Language selected in user interface

       ChilliSpot-Version (14559, 8)
	      Contains the version of the running CoovaChilli

       ChilliSpot-DHCP-Netmask (14559, 61)
	      DHCP IP netmask of the user, which is  configurable  during  MAC
	      authentication in the Access-Accept.

       ChilliSpot-DHCP-DNS1 (14559, 62)
	      DHCP  DNS1 of the user, which is configurable during MAC authen‐
	      tication in the Access-Accept.

       ChilliSpot-DHCP-DNS2 (14559, 63)
	      DHCP DNS2 of the user, which is configurable during MAC  authen‐
	      tication in the Access-Accept.

       ChilliSpot-DHCP-Gateway (14559, 64)
	      DHCP  Gateway  of	 the  user,  which  is configurable during MAC
	      authentication in the Access-Accept.

       ChilliSpot-DHCP-Domain (14559, 65)
	      DHCP Domain of  the  user,  which	 is  configurable  during  MAC
	      authentication in the Access-Accept.

       MS-MPPE-Send-Key (311,16)
	      Used for WPA

       MS-MPPE-Recv-Key (311,17)
	      Used for WPA

SEE ALSO
       chilli(8) chilli.conf(5) chilli_radconfig(1)

NOTES
       See  http://www.coova.org/ for further documentation and community sup‐
       port.

AUTHORS
       David Bird <david@coova.com>

       Copyright (C) 2006-2011 Coova Techcnologies, LLC <support@coova.com>,

       CoovaChilli is licensed under the GNU General Public License.

				  August 2007		      chilli-radius(5)
[top]

List of man pages available for Alpinelinux

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net