btreplay man page on Scientific
btreplay - recreate IO loads recorded by blktrace
btreplay [ options ] <dev...>
The btrecord and btreplay tools provide the ability to record and
replay IOs captured by the blktrace utility. Attempts are made to main‐
tain ordering, CPU mappings and time-separation of IOs.
The blktrace utility provides the ability to collect detailed traces
from the kernel for each IO processed by the block IO layer. The traces
provide a complete timeline for each IO processed, including detailed
information concerning when an IO was first received by the block IO
layer — indicating the device, CPU number, time stamp, IO direction,
sector number and IO size (number of sectors). Using this information,
one is able to replay the IO again on the same machine or another set
The basic operating work-flow to replay IOs would be something like:
Run blktrace to collect traces. Here you specify the
device or devices that you wish to trace and later replay IOs upon.
the only traces you are interested in are QUEUE requests —
thus, to save system resources (including storage for traces), one
specify the -a queue command line option to blktrace.
While blktrace is running, you run the workload that you
are interested in.
When the work load has completed, you stop the blktrace
utility (thus saving all traces over the complete workload).
You extract the pertinent IO information from the traces saved by
blktrace using the btrecord utility. This will parse
each trace file created by blktrace, and crafty IO descriptions
to be used in the next phase of the workload processing.
Once btrecord has successfully created a series of data
files to be processed, you can run the btreplay utility which
attempts to generate the same IOs seen during the sample workload
Set number of CPUs to use.
Set input directory. This option requires a single parameter
providing the directory name for where input files are to be
found. The default directory is the current directory (.).
Find record files automatically This option instructs btreplay
to go find all the record files in the directory specified
(either via the -d option, or in the default directory (.).
Show help and exit.
Set base name for input files. Each input file has 3 fields:
Device identifier (taken directly from the device name of
blktrace output file).
btrecord base name — by default ``replay''.
The CPU number (again, taken directly from the
blktrace output file name).
This option requires a single parameter that will override the
default name (replay), and replace it with the specified value.
Set number of iterations to run. This option requires a single
parameter which specifies the number of times to run through the
input files. The default value is 1
Specify device mappings. This option requires a single parame‐
ter which specifies the name of a file contain device mappings.
The file must be very simply managed, with just two pieces of
data per line:
The device name on the recorded system (with the '/dev/'
removed). Example: /dev/sda would just be sda.
The device name on the replay system to use (again, without
'/dev/' path prepended).
An example file for when one would map devices /dev/sda and
/dev/sdb on the recorded system to dev/sdg and sdh on the replay
system would be:
The only entries in the file that are allowed are these two ele‐
ment lines — we do not (yet?) support the notion of blank lines,
or comment lines, or the like.
The utility allows for multiple -M options to be supplied on the
Disable pre-bunch stalls. When specified on the command line,
all pre-bunch stall indicators will be ignored. IOs will be
replayed without inter-bunch delays.
Specify acceleration factor. Default value is 1 (no accelera‐
Enable verbose output. When specified on the command line, this
option instructs btreplay to store information concerning each
stall and IO operation performed by btreplay. The name of each
file so created will be the input file name used with an exten‐
sion of .rep appended onto it. Thus, an input file of the name
sdab.replay.3 would generate a verbose output file with the name
sdab.replay.3.rep in the directory specified for input files.
In addition, btreplay will also output to stderr the names of
the input files being processed.
Show version number and exit.
Enable writing during replay. As a precautionary measure, by
default btreplay will not process write requests. In order to
enable btreplay to actually write to devices one must explicitly
specify the -W option.
btreplay was written by Alan D. Brunelle. This man page was created
from the btreplay documentation by Bas Zoetekouw.
Report bugs to <email@example.com>
Copyright © 2007 Alan D. Brunelle, Alan D. Brunelle and Nathan Scott.
This is free software. You may redistribute copies of it under the
terms of the GNU General Public License
<http://www.gnu.org/licenses/gpl.html>. There is NO WARRANTY, to the
extent permitted by law.
This manual page was created for Debian by Bas Zoetekouw. It was
derived from the documentation provided by the authors and it may be
used, distributed and modified under the terms of the GNU General Pub‐
lic License, version 2.
On Debian systems, the text of the GNU General Public License can be
found in /usr/share/common-licenses/GPL-2.
The full documentation for btreplay can be found in /usr/share/doc/blk‐
trace on Debian systems.
blktrace (8), blkparse (1), btrecord (8)
blktrace git-20071207142532 December 8, 2007 BTREPLAY(8)
List of man pages available for Scientific
Copyright (c) for man pages and the logo by the respective OS vendor.
For those who want to learn more, the polarhome community provides shell access and support.
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
Vote for polarhome