batch man page on NetBSD

Man page or keyword search:  
man Server   9087 pages
apropos Keyword Search (all sections)
Output format
NetBSD logo
[printable version]

AT(1)			  BSD General Commands Manual			 AT(1)

NAME
     at, batch, atq, atrm — queue, examine or delete jobs for later execution

SYNOPSIS
     at [-bdlmrVv] [-f file] [-q queue] -t [[CC]YY]MMDDhhmm[.SS]
     at [-bdlmrVv] [-f file] [-q queue] time
     at [-V] -c job [job ...]
     atq [-Vv] [-q queue]
     atrm [-V] job [job ...]
     batch [-mVv] [-f file] [-q queue] [-t [[CC]YY]MMDDhhmm[.SS]]
     batch [-mVv] [-f file] [-q queue] [time]

DESCRIPTION
     at and batch read commands from standard input or a specified file which
     are to be executed at a later time, using sh(1).

     at	     Executes commands at a specified time.

     atq     Lists the user's pending jobs, unless the user is the superuser.
	     In that case, everybody's jobs are listed.

     atrm    Deletes jobs.

     batch   Executes commands when system load levels permit.	In other
	     words, when the load average drops below 1.5, or the value speci‐
	     fied in the invocation of atrun(8).

     at allows some moderately complex time specifications.  It accepts times
     of the form HHMM or HH:MM to run a job at a specific time of day.	(If
     that time is already past, the next day is assumed.)  You may also spec‐
     ify ‘midnight’, ‘noon’, or ‘teatime’ (4pm) and you can have a time-of-day
     suffixed with ‘AM’ or ‘PM’ for running in the morning or the evening.
     You can also say what day the job will be run, by giving a date in the
     form %month-name day with an optional year, or giving a date of the form
     MMDDYY or MM/DD/YY or DD.MM.YY.  The specification of a date must follow
     the specification of the time of day.  You can also give times like [now]
     or [now] ‘+ count %time-units’, where the time-units can be ‘minutes’,
     ‘hours’, ‘days’, ‘weeks’, ‘months’, or ‘years’ and you can tell at to run
     the job today by suffixing the time with ‘today’ and to run the job
     tomorrow by suffixing the time with ‘tomorrow’.

     For example, to run a job at 4pm three days from now, you would do
	   at 4pm + 3 days,
     to run a job at 10:00am on July 31, you would do
	   at 10am Jul 31
     and to run a job at 1am tomorrow, you would do
	   at 1am tomorrow.

     Alternatively the time may be specified in a language-neutral fashion by
     using the -t options.

     For both at and batch, commands are read from standard input or the file
     specified with the -f option and executed.	 The working directory, the
     environment (except for the variables TERM, TERMCAP, DISPLAY and _) and
     the umask are retained from the time of invocation.  An at or batch com‐
     mand invoked from a su(1) shell will retain the current userid.  The user
     will be mailed standard error and standard output from his commands, if
     any.  Mail will be sent using the command sendmail(1).  If at is executed
     from a su(1) shell, the owner of the login shell will receive the mail.

     The superuser may use these commands in any case.	For other users, per‐
     mission to use at is determined by the files /var/at/at.allow and
     /var/at/at.deny.

     If the file /var/at/at.allow exists, only usernames mentioned in it are
     allowed to use at.

     If /var/at/at.allow does not exist, /var/at/at.deny is checked, every
     username not mentioned in it is then allowed to use at.

     If neither exists, only the superuser is allowed use of at.

     An empty /var/at/at.deny means that every user is allowed use these com‐
     mands.  This is the default configuration.

OPTIONS
	   -b	       Is an alias for batch.

	   -c	       Cats the jobs listed on the command line to standard
		       output.

	   -d	       Is an alias for atrm.

	   -f file     Reads the job from file rather than standard input.

	   -l	       Is an alias for atq.

	   -m	       Send mail to the user when the job has completed even
		       if there was no output.

	   -q queue    Uses the specified queue.  A queue designation consists
		       of a single letter.  Valid queue designations range
		       from ‘a’ to ‘z’ and ‘A’ to ‘Z’.	The ‘c’ queue is the
		       default for at and the ‘E’ queue for batch.  Queues
		       with higher letters run with increased niceness.	 If a
		       job is submitted to a queue designated with an upper‐
		       case letter, it is treated as if it had been submitted
		       to batch at that time.  If atq is given a specific
		       queue, it will only show jobs pending in that queue.

	   -r	       Is an alias for atrm.

	   -t	       For both at and batch, the time may be specified in a
		       language-neutral format consisting of:
			     CC	     The first two digits of the year (the
				     century).
			     YY	     The second two digits of the year.	 If YY
				     is specified, but CC is not, a value for
				     YY between 69 and 99 results in a CC
				     value of 19.  Otherwise, a CC value of 20
				     is used.
			     MM	     The month of the year, from 01 to 12.
			     DD	     The day of the month, from 01 to 31.
			     hh	     The hour of the day, from 00 to 23.
			     mm	     The minute of the hour, from 00 to 59.
			     SS	     The second of the minute, from 00 to 61.

	   -V	       Prints the version number to standard error.

	   -v	       For atq, shows completed but not yet deleted jobs in
		       the queue.  Otherwise shows the time the job will be
		       executed.

FILES
     /var/at/jobs	Directory containing job files
     /var/at/spool	Directory containing output spool files
     /var/run/utmp	Login records
     /var/at/at.allow	Allow permission control
     /var/at/at.deny	Deny permission control
     /var/at/.lockfile	Job-creation lock file.

SEE ALSO
     nice(1), sendmail(1), sh(1), umask(2), atrun(8), cron(8)

STANDARDS
     The at and batch utilities conform to IEEE Std 1003.2-1992 (“POSIX.2”).

AUTHORS
     At was mostly written by Thomas Koenig <ig25@rz.uni-karlsruhe.de>.	 The
     time parsing routines are by David Parsons <orc@pell.chi.il.us>.

BUGS
     If the file /var/run/utmp is not available or corrupted, or if the user
     is not logged on at the time at is invoked, the mail is sent to the
     userid found in the environment variable LOGNAME.	If that is undefined
     or empty, the current userid is assumed.

     at and batch as presently implemented are not suitable when users are
     competing for resources.  If this is the case for your site, you might
     want to consider another batch system, such as nqs.

BSD				March 10, 2008				   BSD
[top]
                             _         _         _ 
                            | |       | |       | |     
                            | |       | |       | |     
                         __ | | __ __ | | __ __ | | __  
                         \ \| |/ / \ \| |/ / \ \| |/ /  
                          \ \ / /   \ \ / /   \ \ / /   
                           \   /     \   /     \   /    
                            \_/       \_/       \_/ 
More information is available in HTML format for server NetBSD

List of man pages available for NetBSD

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net