AUE(4) BSD Programmer's Manual AUE(4)NAMEaue - ADMtek AN986 / ADM8511 Pegasus family USB Ethernet driver
SYNOPSIS
aue* at uhub? port ?
ukphy* at mii?
DESCRIPTION
The aue driver provides support for USB Ethernet adapters based on the
ADMtek AN986 ("Pegasus") and ADM8511 ("Pegasus II") chipsets. This in-
cludes the following adapters:
3Com 3c460b
Abocom UFE1000
Abocom DSB650TX
Accton USB320-EC
Accton SpeedStream Ethernet
Admtek Pegasus
Admtek Pegasus II
Belkin USB to LAN
Billionton Systems USB100
Billionton Systems USB100EL
Billionton Systems USB100LP
Billionton Systems USBE100
Corega FEther USB-TX
Corega FEther USB-TXS
D-Link DSB-650
D-Link DSB-650TX
D-Link DSB-650TX-PNA
Elecom LD-USB/TX
Elecom LD-USBL/TX
Elsa Microlink USB2Ethernet
I/O DATA USB ETTX
Kingston KNU101TX
LinkSys USB100TX
LinkSys USB100H1
LinkSys USB10T
LinkSys USB10TA
LinkSys USB10TX
Melco Inc. LUA-TX
Melco Inc. LUA2-TX
Netgear FA101
Siemens SpeedStream USB
Smartbridges smartNIC 2
SMC 2202USB
SMC EZ Connect USB
SOHOware NUB100
The Pegasus family of chipsets contain a 10/100 Ethernet MAC with an MII
interface and are designed to work with both Ethernet and HomePNA tran-
sceivers. Although the chipsets are designed to interface with 100Mbps
peripherals, the USB 1.x standards specify a maximum transfer speed of
12Mbps. Users should therefore not expect to actually achieve 100Mbps
speeds with these devices.
The Pegasus chipsets support a 64-bit multicast hash table, single per-
fect filter entry for the station address and promiscuous mode. Packets
are received and transmitted over separate USB bulk transfer endpoints.
The aue driver supports the following media types:
autoselect Enable autoselection of the media type and options. The user
can manually override the autoselected mode by adding media
options to the appropriate hostname.if(5) file.
10baseT Set 10Mbps operation. The mediaopt option can also be used to
enable full-duplex operation. Not specifying full duplex im-
plies half-duplex mode.
100baseTX Set 100Mbps (Fast Ethernet) operation. The mediaopt option
can also be used to enable full-duplex operation. Not speci-
fying full duplex implies half-duplex mode.
The aue driver supports the following media options:
full-duplex
Force full duplex operation. The interface will operate in
half duplex mode if this media option is not specified.
For more information on configuring this device, see ifconfig(8).
DIAGNOSTICS
aue%d: watchdog timeout A packet was queued for transmission and a
transmit command was issued, however the device failed to acknowledge the
transmission before a timeout expired.
aue%d: no memory for rx list The driver failed to allocate an mbuf for
the receiver ring.
SEE ALSOarp(4), ifmedia(4), intro(4), netintro(4), usb(4), hostname.if(5),
ifconfig(8)
ADMtek AN986 and ADM8511 data sheets, http://www.admtek.com.tw.
HISTORY
The aue device driver first appeared in FreeBSD 4.0. OpenBSD support was
added in OpenBSD 2.7.
AUTHORS
The aue driver was written by Bill Paul <wpaul@ee.columbia.edu> and port-
ed to OpenBSD by
Aaron Campbell <aaron@openbsd.org>.
MirOS BSD #10-current December 25, 1999 1