atrm man page on Debian

Man page or keyword search:  
man Server   8174 pages
apropos Keyword Search (all sections)
Output format
Debian logo
[printable version]

AT(1)									 AT(1)

NAME
       at,  batch,  atq, atrm - queue, examine or delete jobs for later execu‐
       tion

SYNOPSIS
       at [-V] [-q queue] [-f file] [-mldv] timespec...
       at [-V] [-q queue] [-f file] [-mkdv] [-t time]
       at -c job [job...]
       atq [-V] [-q queue]
       atrm [-V] job [job...]
       batch
       at -b

DESCRIPTION
       at and batch read commands from standard	 input	or  a  specified  file
       which are to be executed at a later time, using /bin/sh.

       at      executes commands at a specified time.

       atq     lists  the  user's  pending  jobs, unless the user is the supe‐
	       ruser; in that case, everybody's jobs are listed.   The	format
	       of  the	output	lines (one for each job) is: Job number, date,
	       hour, queue, and username.

       atrm    deletes jobs, identified by their job number.

       batch   executes commands when system  load  levels  permit;  in	 other
	       words,  when  the  load	average	 drops below 1.5, or the value
	       specified in the invocation of atd.

       At allows fairly complex time  specifications,  extending  the  POSIX.2
       standard.   It  accepts	times of the form HH:MM to run a job at a spe‐
       cific time of day.  (If that time is already  past,  the	 next  day  is
       assumed.)   You	may  also specify midnight, noon, or teatime (4pm) and
       you can have a time-of-day suffixed with AM or PM for  running  in  the
       morning or the evening.	You can also say what day the job will be run,
       by giving a date in the form month-name day with an optional  year,  or
       giving  a  date	of  the form MMDD[CC]YY, MM/DD/[CC]YY, DD.MM.[CC]YY or
       [CC]YY-MM-DD.  The specification of a date must follow  the  specifica‐
       tion  of	 the  time  of	day.  You can also give times like now + count
       time-units, where the time-units can be minutes, hours, days, or	 weeks
       and  you	 can  tell  at to run the job today by suffixing the time with
       today and to run the job tomorrow by suffixing the time with tomorrow.

       For example, to run a job at 4pm three days from now, you would	do  at
       4pm  + 3 days, to run a job at 10:00am on July 31, you would do at 10am
       Jul 31 and to run a job at 1am tomorrow, you would do at 1am tomorrow.

       The exact  definition  of  the  time  specification  can	 be  found  in
       /usr/share/doc/at/timespec.

       For  both  at  and  batch, commands are read from standard input or the
       file specified with the -f option and executed.	The working directory,
       the environment (except for the variables BASH_VERSINFO, DISPLAY, EUID,
       GROUPS, SHELLOPTS, TERM, UID, and _) and the umask  are	retained  from
       the time of invocation.

       As  at  is currently implemented as a setuid program, other environment
       variables (e.g.	LD_LIBRARY_PATH or LD_PRELOAD) are also not  exported.
       This  may  change  in the future.  As a workaround, set these variables
       explicitly in your job.

       An at - or batch - command invoked from a su(1) shell will  retain  the
       current	userid.	  The  user will be mailed standard error and standard
       output from his commands, if any.  Mail will be sent using the  command
       /usr/sbin/sendmail.  If at is executed from a su(1) shell, the owner of
       the login shell will receive the mail.

       The superuser may use these commands in any  case.   For	 other	users,
       permission  to  use  at	is  determined	by the files /etc/at.allow and
       /etc/at.deny.

       If the file /etc/at.allow exists, only usernames mentioned  in  it  are
       allowed to use at.

       If  /etc/at.allow  does not exist, /etc/at.deny is checked, every user‐
       name not mentioned in it is then allowed to use at.

       If neither exists, only the superuser is allowed use of at.

       An empty /etc/at.deny means that every user is allowed use  these  com‐
       mands, this is the default configuration.

OPTIONS
       -V      prints  the  version number to standard error and exit success‐
	       fully.

       -q queue
	       uses the specified queue.  A queue designation  consists	 of  a
	       single letter; valid queue designations range from a to z.  and
	       A to Z.	The a queue is the default for at and the b queue  for
	       batch.  Queues with higher letters run with increased niceness.
	       The special queue "=" is reserved for jobs which are  currently
	       running.

       If  a  job is submitted to a queue designated with an uppercase letter,
       the job is treated as if it were submitted to batch at the time of  the
       job.  Once the time is reached, the batch processing rules with respect
       to load average apply.  If atq is given a specific queue, it will  only
       show jobs pending in that queue.

       -m      Send  mail to the user when the job has completed even if there
	       was no output.

       -f file Reads the job from file rather than standard input.

       -t time run the job at time, given in the format [[CC]YY]MMDDhhmm[.ss]

       -l      Is an alias for atq.

       -d      Is an alias for atrm.

       -b      is an alias for batch.

       -v      Shows the time the job will be executed before reading the job.

       Times displayed will be in the format "Thu Feb 20 14:50:00 1997".

       -c     cats the jobs listed on the command line to standard output.

FILES
       /var/spool/cron/atjobs
       /var/spool/cron/atspool
       /proc/loadavg
       /var/run/utmp
       /etc/at.allow
       /etc/at.deny

SEE ALSO
       cron(1), nice(1), sh(1), umask(2), atd(8).

BUGS
       The correct operation of batch for Linux depends on the presence	 of  a
       proc- type directory mounted on /proc.

       If the file /var/run/utmp is not available or corrupted, or if the user
       is not logged on at the time at is invoked, the mail  is	 sent  to  the
       userid found in the environment variable LOGNAME.  If that is undefined
       or empty, the current userid is assumed.

       At and batch as presently implemented are not suitable when  users  are
       competing  for resources.  If this is the case for your site, you might
       want to consider another batch system, such as nqs.

AUTHOR
       At was mostly written by Thomas Koenig, ig25@rz.uni-karlsruhe.de.

				  2009-11-14				 AT(1)
[top]

List of man pages available for Debian

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net