AMULEWEB(1) aMule utilities AMULEWEB(1)NAMEamuleweb - aMule web server
SYNOPSISamuleweb [-h <host>] [-p <port>] [-P <password>] [-f <path>] [-q] [-v]
[-l <lang>] [-w] [-t <name>] [-s <port>] [-u] [-U <port>] [-z] [-Z] [-A
<password>] [-G <password>] [-a | -d] [-L] [--no-php] [-N]
amuleweb [--create-config-from=<path>]
amuleweb [--help]
amuleweb [--version]
amuleweb [--amule-config-file=<path>]
DESCRIPTIONamuleweb manages your access to amule through a web browser. You can
start amuleweb together with amule(1), or separately, any time later.
Options can be specified via command-line or via config-file. Command-
line options take precedence over config-file options.
[ -h <host>, --host=<host> ]
Host where aMule is running (default: localhost). <host> might
be an IP address or a DNS name
[ -p <port>, --port=<port> ]
aMule's port for External Connections, as set in Prefer‐
ences->Remote Controls (default: 4712)
[ -P <password>, --password=<password> ]
External Connections password.
[ -f <path>, --config-file=<path> ]
Use the given configuration file. Default configuration file is
~/.aMule/remote.conf
[ -q, --quiet ]
Do not print any output to stdout.
[ -v, --verbose ]
Be verbose - show also debug messages.
[ -l <lang>, --locale=<lang> ]
Sets program locale (language). See the NOTES section for the
description of the <lang> parameter.
[ -w, --write-config ]
Write command line options to config file and exit
[ -t <name>, --template=<name> ]
Loads the template named <name>. See the SKIN SUPPORT section
for details.
[ -s <port>, --server-port=<port> ]
Webserver's HTTP port. This is the port you must point your
browser to (default: 4711).
[ -u ]
Enable UPnP.
[ -U <port>, --upnp-port <port> ]
UPnP port.
[ -z, --enable-gzip ]
Enables using gzip compression in HTTP traffic to save band‐
width.
[ -Z, --disable-gzip ]
Disables using gzip compression (this is the default).
[ -A <passwd>, --admin-pass=<passwd> ]
Full access password for webserver.
[ -G <passwd>, --guest-pass=<passwd> ]
Guest password for webserver.
[ -a, --allow-guest ]
Allows guest access.
[ -d, --deny-guest ]
Denies guest access (default).
[ -L, --load-settings ]
Load/save webserver settings from/to remote aMule. This causes
amuleweb to ignore command-line and config-file settings, and
load them from aMule. When saving preferences none will be
written to the config file, but to aMule. (Of course, this
works only for those settings that can be set in aMule's Prefer‐
ences->Remote Controls.)
[ --no-php ]
Disable PHP interpreter (deprecated)
[ -N, --no-script-cache ]
Recompiles PHP pages on each request.
[ --create-config-from=<path> ]
Create config file based upon <path>, which must point to a
valid aMule config file, and then exit.
[ --help ]
Prints a short usage description.
[ --version ]
Displays the current version number.
[ --amule-config-file=<path> ]
aMule config file path. DO NOT USE DIRECTLY! aMule uses this
option when starting amuleweb at aMule startup. This option
causes all other command-line and config-file settings to be
ignored, preferences to be read from the given config file, and
also implies the -q -L options.
NOTES
Paths
For all options which take a <path> value, if the path contains no
directory part (i.e. just a plain filename), then it is considered to
be under the aMule configuration directory, ~/.aMule.
Languages
The <lang> parameter for the -l option has the following form:
lang[_LANG][.encoding][@modifier] where lang is the primary language,
LANG is a sublanguage/territory, encoding is the character set to use
and modifier allows the user to select a specific instance of localiza‐
tion data within a single category.
For example, the following strings are valid:
de
de_DE
de_DE.iso88591
de_DE@euro
de_DE.iso88591@euro
Though all the above strings are accepted as valid language defini‐
tions, encoding and modifier are yet unused.
In addition to the format above, you can also specify full language
names in English - so -l german is also valid and is equal to -l de_DE.
When no locale is defined, either on command-line or in config file,
system default language will be used.
SKIN SUPPORTamuleweb is capable of displaying information in different skins.
These skins are called templates, and you can make amuleweb load a spe‐
cific template via the -t command line option. Templates are searched
in two places: first in ~/.aMule/webserver/ and then in
/usr/share/amule/webserver/ if you installed with --prefix=/usr.
Each template must be in a subdirectory of the template name, and this
directory must contain all files the template needs.
FILES
~/.aMule/remote.conf
~/.aMule/webserver/
$(pkgdatadir)/webserver/
EXAMPLE
Typically amuleweb will be first run as:
amuleweb-h hostname -p ECport -P ECpassword -s HTTPport -A AdminPass‐
word -w
or
amuleweb --create-config-from=/home/username/.aMule/amule.conf
These will save settings to $HOME/.aMule/remote.conf, and later you
only need to type:
amuleweb
Of course, you may specify any more or less options on the first exam‐
ple line, and you may also totally omit it.
REPORTING BUGS
Please report bugs either on our forum (http://forum.amule.org/), or in
our bugtracker (http://bugs.amule.org/). Please do not report bugs in
e-mail, neither to our mailing list nor directly to any team member.
COPYRIGHT
aMule and all of its related utilities are distributed under the GNU
General Public License.
SEE ALSOamule(1), amulecmd(1)AUTHOR
This manpage was written by Vollstrecker <amule@vollstreckernet.de>
aMule webserver v2.3.1 November 2011 AMULEWEB(1)
