Tcl_PosixError man page on Minix

Man page or keyword search:  
man Server   6208 pages
apropos Keyword Search (all sections)
Output format
Minix logo
[printable version]

Tcl_AddErrorInfo(3)	    Tcl Library Procedures	   Tcl_AddErrorInfo(3)

______________________________________________________________________________

NAME
       Tcl_AddObjErrorInfo,  Tcl_AddErrorInfo, Tcl_SetObjErrorCode, Tcl_SetEr‐
       rorCode,	 Tcl_SetErrorCodeVA,  Tcl_PosixError,	Tcl_LogCommandInfo   -
       record information about errors

SYNOPSIS
       #include <tcl.h>

       Tcl_AddObjErrorInfo(interp, message, length)

       Tcl_AddErrorInfo(interp, message)

       Tcl_SetObjErrorCode(interp, errorObjPtr)

       Tcl_SetErrorCode(interp, element, element, ... (char *) NULL)

       Tcl_SetErrorCodeVA(interp, argList)

       CONST char *
       Tcl_PosixError(interp)

       void
       Tcl_LogCommandInfo(interp, script, command, commandLength)

ARGUMENTS
       Tcl_Interp   *interp    (in)	 Interpreter in which to record infor‐
					 mation.

       char	    *message   (in)	 For Tcl_AddObjErrorInfo, this	points
					 to  the  first	 byte  of  an array of
					 bytes containing a string  to	record
					 in the errorInfo variable.  This byte
					 array may contain embedded null bytes
					 unless	  length   is  negative.   For
					 Tcl_AddErrorInfo, this is  a  conven‐
					 tional	 C  string  to	record	in the
					 errorInfo variable.

       int	    length     (in)	 The number of bytes to copy from mes‐
					 sage when setting the errorInfo vari‐
					 able.	If negative, all bytes	up  to
					 the first null byte are used.

       Tcl_Obj	    *errorObjPtr(in)	 This  variable	 errorCode will be set
					 to this value.

       char	    *element   (in)	 String to record as  one  element  of
					 errorCode   variable.	 Last  element
					 argument must be NULL.

       va_list	    argList    (in)	 An argument list which must have been
					 initialized  using TCL_VARARGS_START,
					 and cleared using va_end.

       CONST char   *script    (in)	 Pointer to first character in	script
					 containing  command  (must be <= com‐
					 mand)

       CONST char   *command   (in)	 Pointer to first character in command
					 that generated the error

       int	    commandLength(in)	 Number	 of bytes in command; -1 means
					 use all bytes up to first null byte
_________________________________________________________________

DESCRIPTION
       These procedures are used to manipulate two Tcl global  variables  that
       hold  information  about	 errors.  The variable errorInfo holds a stack
       trace of the operations that were in progress when an  error  occurred,
       and  is	intended to be human-readable.	The variable errorCode holds a
       list of items that are intended to be machine-readable.	The first item
       in  errorCode  identifies  the class of error that occurred (e.g. POSIX
       means an error occurred in a POSIX system call) and additional elements
       in  errorCode  hold additional pieces of information that depend on the
       class.  See the Tcl overview manual entry for details  on  the  various
       formats for errorCode.

       The  errorInfo  variable	 is  gradually	built  up  as an error unwinds
       through the nested operations.  Each time an error code is returned  to
       Tcl_EvalObjEx  (or  Tcl_Eval,  which  calls Tcl_EvalObjEx) it calls the
       procedure Tcl_AddObjErrorInfo  to  add  additional  text	 to  errorInfo
       describing the command that was being executed when the error occurred.
       By the time the error has been passed all the way back to the  applica‐
       tion, it will contain a complete trace of the activity in progress when
       the error occurred.

       It is sometimes useful  to  add	additional  information	 to  errorInfo
       beyond what can be supplied automatically by Tcl_EvalObjEx.  Tcl_AddOb‐
       jErrorInfo may be used for this purpose: its message and	 length	 argu‐
       ments  describe	an additional string to be appended to errorInfo.  For
       example, the source command calls  Tcl_AddObjErrorInfo  to  record  the
       name of the file being processed and the line number on which the error
       occurred; for Tcl procedures, the procedure name and line number within
       the  procedure  are  recorded,  and  so	on.   The  best	 time  to call
       Tcl_AddObjErrorInfo is just after Tcl_EvalObjEx has returned TCL_ERROR.
       In  calling  Tcl_AddObjErrorInfo,  you  may  find  it useful to use the
       errorLine field of the interpreter (see the Tcl_Interp manual entry for
       details).

       Tcl_AddErrorInfo	 resembles Tcl_AddObjErrorInfo but differs in initial‐
       izing errorInfo from the string value of the  interpreter's  result  if
       the error is just starting to be logged.	 It does not use the result as
       a Tcl object so any embedded null characters in the result  will	 cause
       information  to be lost.	 It also takes a conventional C string in mes‐
       sage instead of Tcl_AddObjErrorInfo's counted string.

       The procedure Tcl_SetObjErrorCode is used to set	 the  errorCode	 vari‐
       able. errorObjPtr contains a list object built up by the caller. error‐
       Code is set to this value.  Tcl_SetObjErrorCode	is  typically  invoked
       just  before  returning	an  error in an object command. If an error is
       returned without calling Tcl_SetObjErrorCode  or	 Tcl_SetErrorCode  the
       Tcl interpreter automatically sets errorCode to NONE.

       The  procedure Tcl_SetErrorCode is also used to set the errorCode vari‐
       able. However, it takes one or more strings to  record  instead	of  an
       object. Otherwise, it is similar to Tcl_SetObjErrorCode in behavior.

       Tcl_SetErrorCodeVA  is the same as Tcl_SetErrorCode except that instead
       of taking a variable number of arguments it takes an argument list.

       Tcl_PosixError sets the errorCode variable after an error  in  a	 POSIX
       kernel  call.   It  reads  the  value of the errno C variable and calls
       Tcl_SetErrorCode to set errorCode in the POSIX format.  The caller must
       previously  have called Tcl_SetErrno to set errno; this is necessary on
       some platforms (e.g. Windows) where Tcl is linked into  an  application
       as  a  shared library, or when the error occurs in a dynamically loaded
       extension. See the manual entry for Tcl_SetErrno for more information.

       Tcl_PosixError returns a	 human-readable	 diagnostic  message  for  the
       error  (this is the same value that will appear as the third element in
       errorCode).  It may be convenient to include this string as part of the
       error message returned to the application in the interpreter's result.

       Tcl_LogCommandInfo  is invoked after an error occurs in an interpreter.
       It adds information about the command that was being executed when  the
       error  occurred	to  the errorInfo variable, and the line number stored
       internally in the interpreter is set.  On the first call to Tcl_LogCom‐
       mandInfo or Tcl_AddObjErrorInfo since an error occurred, the old infor‐
       mation in errorInfo is deleted.

       It is important to call the procedures described here rather than  set‐
       ting  errorInfo	or errorCode directly with Tcl_ObjSetVar2.  The reason
       for this is that the Tcl interpreter keeps  information	about  whether
       these  procedures  have	been  called.	For  example,  the  first time
       Tcl_AddObjErrorInfo is called for an  error,  it	 clears	 the  existing
       value  of  errorInfo  and  adds	the error message in the interpreter's
       result to the variable before appending message; in  subsequent	calls,
       it  just	 appends the new message.  When Tcl_SetErrorCode is called, it
       sets a flag indicating that errorCode has been set; this allows the Tcl
       interpreter  to	set  errorCode	to NONE if it receives an error return
       when Tcl_SetErrorCode hasn't been called.

       If the procedure Tcl_ResetResult is called, it clears all of the	 state
       associated with errorInfo and errorCode (but it doesn't actually modify
       the variables).	If an error had occurred, this will  clear  the	 error
       state to make it appear as if no error had occurred after all.

SEE ALSO
       Tcl_DecrRefCount,    Tcl_IncrRefCount,	Tcl_Interp,   Tcl_ResetResult,
       Tcl_SetErrno

KEYWORDS
       error, object, object result, stack, trace, variable

Tcl				      8.0		   Tcl_AddErrorInfo(3)
[top]

List of man pages available for Minix

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net