SIGVEC man page on 4.4BSD

Printed from

SIGVEC(2)		    BSD System Calls Manual		     SIGVEC(2)

     sigvec — software signal facilities

     #include <signal.h>

     struct sigvec {
	     void     (*sv_handler)();
	     sigset_t sv_mask;
	     int      sv_flags;

     sigvec(int sig, struct sigvec *vec, struct sigvec *ovec);

     This interface is made obsolete by sigaction(2).

     The system defines a set of signals that may be delivered to a process.
     Signal delivery resembles the occurrence of a hardware interrupt: the
     signal is blocked from further occurrence, the current process context is
     saved, and a new one is built.  A process may specify a handler to which
     a signal is delivered, or specify that a signal is to be blocked or
     ignored.  A process may also specify that a default action is to be taken
     by the system when a signal occurs.  Normally, signal handlers execute on
     the current stack of the process.	This may be changed, on a per-handler
     basis, so that signals are taken on a special signal stack.

     All signals have the same priority.  Signal routines execute with the
     signal that caused their invocation blocked, but other signals may yet
     occur.  A global signal mask defines the set of signals currently blocked
     from delivery to a process.  The signal mask for a process is initialized
     from that of its parent (normally 0).  It may be changed with a
     sigblock(2) or sigsetmask(2) call, or when a signal is delivered to the

     When a signal condition arises for a process, the signal is added to a
     set of signals pending for the process.  If the signal is not currently
     blocked by the process then it is delivered to the process.  When a sig‐
     nal is delivered, the current state of the process is saved, a new signal
     mask is calculated (as described below), and the signal handler is
     invoked.  The call to the handler is arranged so that if the signal han‐
     dling routine returns normally the process will resume execution in the
     context from before the signal's delivery.	 If the process wishes to
     resume in a different context, then it must arrange to restore the previ‐
     ous context itself.

     When a signal is delivered to a process a new signal mask is installed
     for the duration of the process' signal handler (or until a sigblock or
     sigsetmask call is made).	This mask is formed by taking the current sig‐
     nal mask, adding the signal to be delivered, and or'ing in the signal
     mask associated with the handler to be invoked.

     Sigvec() assigns a handler for a specific signal.	If vec is non-zero, it
     specifies a handler routine and mask to be used when delivering the spec‐
     ified signal.  Further, if the SV_ONSTACK bit is set in sv_flags, the
     system will deliver the signal to the process on a signal stack, speci‐
     fied with sigaltstack(2).	If ovec is non-zero, the previous handling
     information for the signal is returned to the user.

     The following is a list of all signals with names as in the include file

       NAME	       Default Action			   Description
     SIGHUP	     terminate process	     terminal line hangup
     SIGINT	     terminate process	     interrupt program
     SIGQUIT	     create core image	     quit program
     SIGILL	     create core image	     illegal instruction
     SIGTRAP	     create core image	     trace trap
     SIGABRT	     create core image	     abort(2) call (formerly SIGIOT)
     SIGEMT	     create core image	     emulate instruction executed
     SIGFPE	     create core image	     floating-point exception
     SIGKILL	     terminate process	     kill program
     SIGBUS	     create core image	     bus error
     SIGSEGV	     create core image	     segmentation violation
     SIGSYS	     create core image	     system call given invalid
     SIGPIPE	     terminate process	     write on a pipe with no reader
     SIGALRM	     terminate process	     real-time timer expired
     SIGTERM	     terminate process	     software termination signal
     SIGURG	     discard signal	     urgent condition present on
     SIGSTOP	     stop process	     stop (cannot be caught or
     SIGTSTP	     stop process	     stop signal generated from
     SIGCONT	     discard signal	     continue after stop
     SIGCHLD	     discard signal	     child status has changed
     SIGTTIN	     stop process	     background read attempted from
					     control terminal
     SIGTTOU	     stop process	     background write attempted to
					     control terminal
     SIGIO	     discard signal	     I/O is possible on a descriptor
					     (see fcntl(2))
     SIGXCPU	     terminate process	     cpu time limit exceeded (see
     SIGXFSZ	     terminate process	     file size limit exceeded (see
     SIGVTALRM	     terminate process	     virtual time alarm (see
     SIGPROF	     terminate process	     profiling timer alarm (see
     SIGWINCH	     discard signal	     Window size change
     SIGINFO	     discard signal	     status request from keyboard
     SIGUSR1	     terminate process	     User defined signal 1
     SIGUSR2	     terminate process	     User defined signal 2

     Once a signal handler is installed, it remains installed until another
     sigvec() call is made, or an execve(2) is performed.  A signal-specific
     default action may be reset by setting sv_handler to SIG_DFL.  The
     defaults are process termination, possibly with core dump; no action;
     stopping the process; or continuing the process.  See the above signal
     list for each signal's default action.  If sv_handler is SIG_IGN current
     and pending instances of the signal are ignored and discarded.

     If a signal is caught during the system calls listed below, the call is
     normally restarted.  The call can be forced to terminate prematurely with
     an EINTR error return by setting the SV_INTERRUPT bit in sv_flags.	 The
     affected system calls include read(2), write(2), sendto(2), recvfrom(2),
     sendmsg(2) and recvmsg(2) on a communications channel or a slow device
     (such as a terminal, but not a regular file) and during a wait(2) or
     ioctl(2).	However, calls that have already committed are not restarted,
     but instead return a partial success (for example, a short read count).

     After a fork(2) or vfork(2) all signals, the signal mask, the signal
     stack, and the restart/interrupt flags are inherited by the child.

     Execve(2) reinstates the default action for all signals which were caught
     and resets all signals to be caught on the user stack.  Ignored signals
     remain ignored; the signal mask remains the same; signals that interrupt
     system calls continue to do so.

     The mask specified in vec is not allowed to block SIGKILL or SIGSTOP.
     This is done silently by the system.

     The SV_INTERRUPT flag is not available in 4.2BSD, hence it should not be
     used if backward compatibility is needed.

     A 0 value indicated that the call succeeded.  A -1 return value indicates
     an error occurred and errno is set to indicated the reason.

     Sigvec() will fail and no new signal handler will be installed if one of
     the following occurs:

     [EFAULT]  Either vec or ovec points to memory that is not a valid part of
	       the process address space.

     [EINVAL]  Sig is not a valid signal number.

     [EINVAL]  An attempt is made to ignore or supply a handler for SIGKILL or

     kill(1), kill(2), ptrace(2), sigaction(2), sigaltstack(2), sigblock(2),
     sigpause(2), sigprocmask(2), sigsetmask(2), sigsuspend(2), setjmp(3),
     siginterrupt(3), signal(3,) sigsetops(3), tty(4)

     On the VAX-11 The handler routine can be declared:

	   void handler(sig, code, scp)
	   int sig, code;
	   struct sigcontext *scp;

     Here sig is the signal number, into which the hardware faults and traps
     are mapped as defined below.  Code is a parameter that is either a con‐
     stant as given below or, for compatibility mode faults, the code provided
     by the hardware (Compatibility mode faults are distinguished from the
     other SIGILL traps by having PSL_CM set in the psl).  Scp is a pointer to
     the sigcontext structure (defined in ⟨signal.h⟩), used to restore the
     context from before the signal.

     This manual page is still confusing.

4th Berkeley Distribution	April 19, 1994	     4th Berkeley Distribution

List of man pages available for 4.4BSD

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
Vote for polarhome
Free Shell Accounts :: the biggest list on the net