Net::SMTP man page on HP-UX

Man page or keyword search:  
man Server   10987 pages
apropos Keyword Search (all sections)
Output format
HP-UX logo
[printable version]

Net::SMTP(3)	       Perl Programmers Reference Guide		  Net::SMTP(3)

NAME
       Net::SMTP - Simple Mail Transfer Protocol Client

SYNOPSIS
	   use Net::SMTP;

	   # Constructors
	   $smtp = Net::SMTP->new('mailhost');
	   $smtp = Net::SMTP->new('mailhost', Timeout => 60);

DESCRIPTION
       This module implements a client interface to the SMTP and ESMTP
       protocol, enabling a perl5 application to talk to SMTP servers. This
       documentation assumes that you are familiar with the concepts of the
       SMTP protocol described in RFC821.

       A new Net::SMTP object must be created with the new method. Once this
       has been done, all SMTP commands are accessed through this object.

       The Net::SMTP class is a subclass of Net::Cmd and IO::Socket::INET.

EXAMPLES
       This example prints the mail domain name of the SMTP server known as
       mailhost:

	   #!/usr/local/bin/perl -w

	   use Net::SMTP;

	   $smtp = Net::SMTP->new('mailhost');
	   print $smtp->domain,"\n";
	   $smtp->quit;

       This example sends a small message to the postmaster at the SMTP server
       known as mailhost:

	   #!/usr/local/bin/perl -w

	   use Net::SMTP;

	   $smtp = Net::SMTP->new('mailhost');

	   $smtp->mail($ENV{USER});
	   $smtp->to('postmaster');

	   $smtp->data();
	   $smtp->datasend("To: postmaster\n");
	   $smtp->datasend("\n");
	   $smtp->datasend("A simple test message\n");
	   $smtp->dataend();

	   $smtp->quit;

CONSTRUCTOR
       new ( [ HOST ] [, OPTIONS ] )
	   This is the constructor for a new Net::SMTP object. "HOST" is the
	   name of the remote host to which an SMTP connection is required.

	   "HOST" is optional. If "HOST" is not given then it may instead be
	   passed as the "Host" option described below. If neither is given
	   then the "SMTP_Hosts" specified in "Net::Config" will be used.

	   "OPTIONS" are passed in a hash like fashion, using key and value
	   pairs.  Possible options are:

	   Hello - SMTP requires that you identify yourself. This option
	   specifies a string to pass as your mail domain. If not given
	   localhost.localdomain will be used.

	   Host - SMTP host to connect to. It may be a single scalar, as
	   defined for the "PeerAddr" option in IO::Socket::INET, or a
	   reference to an array with hosts to try in turn. The "host" method
	   will return the value which was used to connect to the host.

	   LocalAddr and LocalPort - These parameters are passed directly to
	   IO::Socket to allow binding the socket to a local port.

	   Timeout - Maximum time, in seconds, to wait for a response from the
	   SMTP server (default: 120)

	   ExactAddresses - If true the all ADDRESS arguments must be as
	   defined by "addr-spec" in RFC2822. If not given, or false, then
	   Net::SMTP will attempt to extract the address from the value
	   passed.

	   Debug - Enable debugging information

	   Example:

	       $smtp = Net::SMTP->new('mailhost',
				      Hello => 'my.mail.domain',
				      Timeout => 30,
				      Debug   => 1,
				     );

	       # the same
	       $smtp = Net::SMTP->new(
				      Host => 'mailhost',
				      Hello => 'my.mail.domain',
				      Timeout => 30,
				      Debug   => 1,
				     );

	       # Connect to the default server from Net::config
	       $smtp = Net::SMTP->new(
				      Hello => 'my.mail.domain',
				      Timeout => 30,
				     );

METHODS
       Unless otherwise stated all methods return either a true or false
       value, with true meaning that the operation was a success. When a
       method states that it returns a value, failure will be returned as
       undef or an empty list.

       banner ()
	   Returns the banner message which the server replied with when the
	   initial connection was made.

       domain ()
	   Returns the domain that the remote SMTP server identified itself as
	   during connection.

       hello ( DOMAIN )
	   Tell the remote server the mail domain which you are in using the
	   EHLO command (or HELO if EHLO fails).  Since this method is invoked
	   automatically when the Net::SMTP object is constructed the user
	   should normally not have to call it manually.

       host ()
	   Returns the value used by the constructor, and passed to
	   IO::Socket::INET, to connect to the host.

       etrn ( DOMAIN )
	   Request a queue run for the DOMAIN given.

       auth ( USERNAME, PASSWORD )
	   Attempt SASL authentication.

       mail ( ADDRESS [, OPTIONS] )
       send ( ADDRESS )
       send_or_mail ( ADDRESS )
       send_and_mail ( ADDRESS )
	   Send the appropriate command to the server MAIL, SEND, SOML or
	   SAML. "ADDRESS" is the address of the sender. This initiates the
	   sending of a message. The method "recipient" should be called for
	   each address that the message is to be sent to.

	   The "mail" method can some additional ESMTP OPTIONS which is passed
	   in hash like fashion, using key and value pairs.  Possible options
	   are:

	    Size	=> <bytes>
	    Return	=> "FULL" | "HDRS"
	    Bits	=> "7" | "8" | "binary"
	    Transaction => <ADDRESS>
	    Envelope	=> <ENVID>     # xtext-encodes its argument
	    ENVID	=> <ENVID>     # similar to Envelope, but expects argument encoded
	    XVERP	=> 1
	    AUTH	=> <submitter> # encoded address according to RFC 2554

	   The "Return" and "Envelope" parameters are used for DSN (Delivery
	   Status Notification).

	   The submitter address in "AUTH" option is expected to be in a
	   format as required by RFC 2554, in an RFC2821-quoted form and
	   xtext-encoded, or <> .

       reset ()
	   Reset the status of the server. This may be called after a message
	   has been initiated, but before any data has been sent, to cancel
	   the sending of the message.

       recipient ( ADDRESS [, ADDRESS, [...]] [, OPTIONS ] )
	   Notify the server that the current message should be sent to all of
	   the addresses given. Each address is sent as a separate command to
	   the server.	Should the sending of any address result in a failure
	   then the process is aborted and a false value is returned. It is up
	   to the user to call "reset" if they so desire.

	   The "recipient" method can also pass additional case-sensitive
	   OPTIONS as an anonymous hash using key and value pairs.  Possible
	   options are:

	     Notify  => ['NEVER'] or ['SUCCESS','FAILURE','DELAY']  (see below)
	     ORcpt   => <ORCPT>
	     SkipBad => 1	 (to ignore bad addresses)

	   If "SkipBad" is true the "recipient" will not return an error when
	   a bad address is encountered and it will return an array of
	   addresses that did succeed.

	     $smtp->recipient($recipient1,$recipient2);	 # Good
	     $smtp->recipient($recipient1,$recipient2, { SkipBad => 1 });  # Good
	     $smtp->recipient($recipient1,$recipient2, { Notify => ['FAILURE','DELAY'], SkipBad => 1 });  # Good
	     @goodrecips=$smtp->recipient(@recipients, { Notify => ['FAILURE'], SkipBad => 1 });  # Good
	     $smtp->recipient("$recipient,$recipient2"); # BAD

	   Notify is used to request Delivery Status Notifications (DSNs), but
	   your SMTP/ESMTP service may not respect this request depending upon
	   its version and your site's SMTP configuration.

	   Leaving out the Notify option usually defaults an SMTP service to
	   its default behavior equivalent to ['FAILURE'] notifications only,
	   but again this may be dependent upon your site's SMTP
	   configuration.

	   The NEVER keyword must appear by itself if used within the Notify
	   option and "requests that a DSN not be returned to the sender under
	   any conditions."

	     {Notify => ['NEVER']}

	     $smtp->recipient(@recipients, { Notify => ['NEVER'], SkipBad => 1 });  # Good

	   You may use any combination of these three values
	   'SUCCESS','FAILURE','DELAY' in the anonymous array reference as
	   defined by RFC3461 (see http://rfc.net/rfc3461.html for more
	   information.	 Note: quotations in this topic from same.).

	   A Notify parameter of 'SUCCESS' or 'FAILURE' "requests that a DSN
	   be issued on successful delivery or delivery failure,
	   respectively."

	   A Notify parameter of 'DELAY' "indicates the sender's willingness
	   to receive delayed DSNs.  Delayed DSNs may be issued if delivery of
	   a message has been delayed for an unusual amount of time (as
	   determined by the Message Transfer Agent (MTA) at which the message
	   is delayed), but the final delivery status (whether successful or
	   failure) cannot be determined.  The absence of the DELAY keyword in
	   a NOTIFY parameter requests that a "delayed" DSN NOT be issued
	   under any conditions."

	     {Notify => ['SUCCESS','FAILURE','DELAY']}

	     $smtp->recipient(@recipients, { Notify => ['FAILURE','DELAY'], SkipBad => 1 });  # Good

	   ORcpt is also part of the SMTP DSN extension according to RFC3461.
	   It is used to pass along the original recipient that the mail was
	   first sent to.  The machine that generates a DSN will use this
	   address to inform the sender, because he can't know if recipients
	   get rewritten by mail servers.  It is expected to be in a format as
	   required by RFC3461, xtext-encoded.

       to ( ADDRESS [, ADDRESS [...]] )
       cc ( ADDRESS [, ADDRESS [...]] )
       bcc ( ADDRESS [, ADDRESS [...]] )
	   Synonyms for "recipient".

       data ( [ DATA ] )
	   Initiate the sending of the data from the current message.

	   "DATA" may be a reference to a list or a list. If specified the
	   contents of "DATA" and a termination string ".\r\n" is sent to the
	   server. And the result will be true if the data was accepted.

	   If "DATA" is not specified then the result will indicate that the
	   server wishes the data to be sent. The data must then be sent using
	   the "datasend" and "dataend" methods described in Net::Cmd.

       expand ( ADDRESS )
	   Request the server to expand the given address Returns an array
	   which contains the text read from the server.

       verify ( ADDRESS )
	   Verify that "ADDRESS" is a legitimate mailing address.

	   Most sites usually disable this feature in their SMTP service
	   configuration.  Use "Debug => 1" option under new() to see if
	   disabled.

       help ( [ $subject ] )
	   Request help text from the server. Returns the text or undef upon
	   failure

       quit ()
	   Send the QUIT command to the remote SMTP server and close the
	   socket connection.

ADDRESSES
       Net::SMTP attempts to DWIM with addresses that are passed. For example
       an application might extract The From: line from an email and pass that
       to mail(). While this may work, it is not recommended.  The application
       should really use a module like Mail::Address to extract the mail
       address and pass that.

       If "ExactAddresses" is passed to the constructor, then addresses should
       be a valid rfc2821-quoted address, although Net::SMTP will accept
       accept the address surrounded by angle brackets.

	funny user@domain      WRONG
	"funny user"@domain    RIGHT, recommended
	<"funny user"@domain>  OK

SEE ALSO
       Net::Cmd

AUTHOR
       Graham Barr <gbarr@pobox.com>

COPYRIGHT
       Copyright (c) 1995-2004 Graham Barr. All rights reserved.  This program
       is free software; you can redistribute it and/or modify it under the
       same terms as Perl itself.

perl v5.10.1			  2009-02-12			  Net::SMTP(3)
[top]

List of man pages available for HP-UX

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net