Net::LDAP::RFC man page on Mageia

Man page or keyword search:  
man Server   17783 pages
apropos Keyword Search (all sections)
Output format
Mageia logo
[printable version]

Net::LDAP::RFC(3)     User Contributed Perl Documentation    Net::LDAP::RFC(3)

NAME
       Net::LDAP::RFC - List of related RFC's

SYNOPSIS
	 none

DESCRIPTION
       The LDAP protocol is defined in the following RFC's

Core LDAP Specification
   RFC-4510 Lightweight Directory Access Protocol (LDAP): Technical
       Specification Road Map
       http://www.ietf.org/rfc/rfc4510.txt

       The Lightweight Directory Access Protocol (LDAP) is an Internet
       protocol for accessing distributed directory services that act in
       accordance with X.500 data and service models.  This document provides
       a road map of the LDAP Technical Specification.

   RFC-4511 Lightweight Directory Access Protocol (LDAP): The Protocol
       http://www.ietf.org/rfc/rfc4511.txt

       This document describes the protocol elements, along with their
       semantics and encodings, of the Lightweight Directory Access Protocol
       (LDAP).	LDAP provides access to distributed directory services that
       act in accordance with X.500 data and service models.  These protocol
       elements are based on those described in the X.500 Directory Access
       Protocol (DAP).

   RFC-4512 Lightweight Directory Access Protocol (LDAP): Directory
       Information Models
       http://www.ietf.org/rfc/rfc4512.txt

       The Lightweight Directory Access Protocol (LDAP) is an Internet
       protocol for accessing distributed directory services that act in
       accordance with X.500 data and service models.  This document describes
       the X.500 Directory Information Models, as used in LDAP.

   RFC-4513 Lightweight Directory Access Protocol (LDAP): Authentication
       Methods and Security Mechanisms
       http://www.ietf.org/rfc/rfc4513.txt

       This document describes authentication methods and security mechanisms
       of the Lightweight Directory Access Protocol (LDAP).  This document
       details establishment of Transport Layer Security (TLS) using the
       StartTLS operation.

       This document details the simple Bind authentication method including
       anonymous, unauthenticated, and name/password mechanisms and the Simple
       Authentication and Security Layer (SASL) Bind authentication method
       including the EXTERNAL mechanism.

       This document discusses various authentication and authorization states
       through which a session to an LDAP server may pass and the actions that
       trigger these state changes.

   RFC-4514 Lightweight Directory Access Protocol (LDAP): String
       Representation of Distinguished Names
       http://www.ietf.org/rfc/rfc4514.txt

       The X.500 Directory uses distinguished names (DNs) as primary keys to
       entries in the directory.  This document defines the string
       representation used in the Lightweight Directory Access Protocol (LDAP)
       to transfer distinguished names.	 The string representation is designed
       to give a clean representation of commonly used distinguished names,
       while being able to represent any distinguished name.

   RFC-4515 Lightweight Directory Access Protocol (LDAP): String
       Representation of Search Filters
       http://www.ietf.org/rfc/rfc4515.txt

       Lightweight Directory Access Protocol (LDAP) search filters are
       transmitted in the LDAP protocol using a binary representation that is
       appropriate for use on the network.  This document defines a human-
       readable string representation of LDAP search filters that is
       appropriate for use in LDAP URLs (RFC 4516) and in other applications.

   RFC-4516 Lightweight Directory Access Protocol (LDAP): Uniform Resource
       Locator
       http://www.ietf.org/rfc/rfc4516.txt

       This document describes a format for a Lightweight Directory Access
       Protocol (LDAP) Uniform Resource Locator (URL).	An LDAP URL describes
       an LDAP search operation that is used to retrieve information from an
       LDAP directory, or, in the context of an LDAP referral or reference, an
       LDAP URL describes a service where an LDAP operation may be progressed.

   RFC-4517 Lightweight Directory Access Protocol (LDAP): Syntaxes and
       Matching Rules
       http://www.ietf.org/rfc/rfc4517.txt

       Each attribute stored in a Lightweight Directory Access Protocol (LDAP)
       directory, whose values may be transferred in the LDAP protocol, has a
       defined syntax that constrains the structure and format of its values.
       The comparison semantics for values of a syntax are not part of the
       syntax definition but are instead provided through separately defined
       matching rules.	Matching rules specify an argument, an assertion
       value, which also has a defined syntax.	This document defines a base
       set of syntaxes and matching rules for use in defining attributes for
       LDAP directories.

   RFC-4518 Lightweight Directory Access Protocol (LDAP): Internationalized
       String Preparation
       http://www.ietf.org/rfc/rfc4518.txt

       The previous Lightweight Directory Access Protocol (LDAP) technical
       specifications did not precisely define how character string matching
       is to be performed.  This led to a number of usability and
       interoperability problems.  This document defines string preparation
       algorithms for character-based matching rules defined for use in LDAP.

   RFC-4519 Lightweight Directory Access Protocol (LDAP): Schema for User
       Applications
       http://www.ietf.org/rfc/rfc4519.txt

       This document is an integral part of the Lightweight Directory Access
       Protocol (LDAP) technical specification.	 It provides a technical
       specification of attribute types and object classes intended for use by
       LDAP directory clients for many directory services, such as White
       Pages.  These objects are widely used as a basis for the schema in many
       LDAP directories.  This document does not cover attributes used for the
       administration of directory servers, nor does it include directory
       objects defined for specific uses in other documents.

Other LDAP Related RFCs - Proposed Standards
   RFC-6171 The Lightweight Directory Access Protocol (LDAP) Don't Use Copy
       Control
       http://www.ietf.org/rfc/rfc6171.txt

       This document defines the Lightweight Directory Access Protocol (LDAP)
       Don't Use Copy control extension which allows a client to specify that
       copied information should not be used in providing service.  This
       control is based upon the X.511 dontUseCopy service control option.

   RFC-5020 The Lightweight Directory Access Protocol (LDAP) entryDN
       Operational Attribute
       http://www.ietf.org/rfc/rfc5020.txt

       This document describes the LDAP/X.500 'entryDN' operational attribute.
       The attribute provides a copy of the entry's distinguished name for use
       in attribute value assertions.

   RFC-4792 Encoding Instructions for the Generic String Encoding Rules (GSER)
       http://www.ietf.org/rfc/rfc4792.txt

       Abstract Syntax Notation One (ASN.1) defines a general framework for
       annotating types in an ASN.1 specification with encoding instructions
       that alter how values of those types are encoded according to ASN.1
       encoding rules.	This document defines the supporting notation for
       encoding instructions that apply to the Generic String Encoding Rules
       (GSER), and in particular defines an encoding instruction to provide a
       machine-processable representation for the declaration of a GSER
       ChoiceOfStrings type.

   RFC-4532 Lightweight Directory Access Protocol (LDAP) Who am I? Operation
       http://www.ietf.org/rfc/rfc4532.txt

       This specification provides a mechanism for Lightweight Directory
       Access Protocol (LDAP) clients to obtain the authorization identity the
       server has associated with the user or application entity.  This
       mechanism is specified as an LDAP extended operation called the LDAP
       "Who am I?" operation.

   RFC-4530 Lightweight Directory Access Protocol (LDAP) entryUUID Operational
       Attribute
       http://www.ietf.org/rfc/rfc4530.txt

       This document describes the LDAP/X.500 'entryUUID' operational
       attribute and associated matching rules and syntax.  The attribute
       holds a server-assigned Universally Unique Identifier (UUID) for the
       object.	Directory clients may use this attribute to distinguish
       objects identified by a distinguished name or to locate an object after
       renaming.

   RFC-4528 Lightweight Directory Access Protocol (LDAP) Assertion Control
       http://www.ietf.org/rfc/rfc4528.txt

       This document defines the Lightweight Directory Access Protocol (LDAP)
       Assertion Control, which allows a client to specify that a directory
       operation should only be processed if an assertion applied to the
       target entry of the operation is true.  It can be used to construct
       "test and set", "test and clear", and other conditional operations.

   RFC-4527 Lightweight Directory Access Protocol (LDAP) Read Entry Controls
       http://www.ietf.org/rfc/rfc4527.txt

       This document specifies an extension to the Lightweight Directory
       Access Protocol (LDAP) to allow the client to read the target entry of
       an update operation.  The client may request to read the entry before
       and/or after the modifications are applied.  These reads are done as an
       atomic part of the update operation.

   RFC-4526 Lightweight Directory Access Protocol (LDAP) Absolute True and
       False Filters
       http://www.ietf.org/rfc/rfc4526.txt

       This document extends the Lightweight Directory Access Protocol (LDAP)
       to support absolute True and False filters based upon similar
       capabilities found in X.500 directory systems.  The document also
       extends the String Representation of LDAP Search Filters to support
       these filters.

   RFC-4524 COSINE LDAP/X.500 Schema
       http://www.ietf.org/rfc/rfc4524.txt

       This document provides a collection of schema elements for use with the
       Lightweight Directory Access Protocol (LDAP) from the COSINE and
       Internet X.500 pilot projects.

   RFC-4523 Lightweight Directory Access Protocol (LDAP) Schema Definitions
       for X.509 Certificates
       http://www.ietf.org/rfc/rfc4523.txt

       This document describes schema for representing X.509 certificates,
       X.521 security information, and related elements in directories
       accessible using the Lightweight Directory Access Protocol (LDAP).  The
       LDAP definitions for these X.509 and X.521 schema elements replace
       those provided in RFCs 2252 and 2256.

   RFC-4522 Lightweight Directory Access Protocol (LDAP): The Binary Encoding
       Option
       http://www.ietf.org/rfc/rfc4522.txt

       Each attribute stored in a Lightweight Directory Access Protocol (LDAP)
       directory has a defined syntax (i.e., data type).  A syntax definition
       specifies how attribute values conforming to the syntax are normally
       represented when transferred in LDAP operations.	 This representation
       is referred to as the LDAP-specific encoding to distinguish it from
       other methods of encoding attribute values.  This document defines an
       attribute option, the binary option, that can be used to specify that
       the associated attribute values are instead encoded according to the
       Basic Encoding Rules (BER) used by X.500 directories.

   RFC-4370 Lightweight Directory Access Protocol (LDAP) Proxied Authorization
       Control
       http://www.ietf.org/rfc/rfc4370.txt

       This document defines the Lightweight Directory Access Protocol (LDAP)
       Proxy Authorization Control.  The Proxy Authorization Control allows a
       client to request that an operation be processed under a provided
       authorization identity instead of under the current authorization
       identity associated with the connection.

   RFC-4104 Policy Core Extension Lightweight Directory Access Protocol Schema
       (PCELS)
       http://www.ietf.org/rfc/rfc4104.txt

       This document defines a number of changes and extensions to the Policy
       Core Lightweight Directory Access Protocol (LDAP) Schema (RFC 3703)
       based on the model extensions defined by the Policy Core Information
       Model (PCIM) Extensions (RFC 3460).  These changes and extensions
       consist of new LDAP object classes and attribute types.	Some of the
       schema items defined in this document re-implement existing concepts in
       accordance with their new semantics introduced by RFC 3460.  The other
       schema items implement new concepts, not covered by RFC 3703.  This
       document updates RFC 3703.

   RFC-3928 Lightweight Directory Access Protocol (LDAP) Client Update
       Protocol (LCUP)
       http://www.ietf.org/rfc/rfc3928.txt

       This document defines the Lightweight Directory Access Protocol (LDAP)
       Client Update Protocol (LCUP).  The protocol is intended to allow an
       LDAP client to synchronize with the content of a directory information
       tree (DIT) stored by an LDAP server and to be notified about the
       changes to that content.

   RFC-3909 Lightweight Directory Access Protocol (LDAP) Cancel Operation
       http://www.ietf.org/rfc/rfc3909.txt

       This specification describes a Lightweight Directory Access Protocol
       (LDAP) extended operation to cancel (or abandon) an outstanding
       operation.  Unlike the LDAP Abandon operation, but like the X.511
       Directory Access Protocol (DAP) Abandon operation, this operation has a
       response which provides an indication of its outcome.

   RFC-3876 Returning Matched Values with the Lightweight Directory Access
       Protocol version 3 (LDAPv3)
       http://www.ietf.org/rfc/rfc3876.txt

       This document describes a control for the Lightweight Directory Access
       Protocol version 3 that is used to return a subset of attribute values
       from an entry.  Specifically, only those values that match a "values
       return" filter.	Without support for this control, a client must
       retrieve all of an attribute's values and search for specific values
       locally.

   RFC-3866 Language Tags and Ranges in the Lightweight Directory Access
       Protocol (LDAP)
       http://www.ietf.org/rfc/rfc3866.txt

       It is often desirable to be able to indicate the natural language
       associated with values held in a directory and to be able to query the
       directory for values which fulfill the user's language needs.  This
       document details the use of Language Tags and Ranges in the Lightweight
       Directory Access Protocol (LDAP).

   RFC-3727 ASN.1 Module Definition for the LDAP and X.500 Component Matching
       Rules
       http://www.ietf.org/rfc/rfc3727.txt

       This document updates the specification of the component matching rules
       for Lightweight Directory Access Protocol (LDAP) and X.500 directories
       (RFC3687) by collecting the Abstract Syntax Notation One (ASN.1)
       definitions of the component matching rules into an appropriately
       identified ASN.1 module so that other specifications may reference the
       component matching rule definitions from within their own ASN.1
       modules.

   RFC-3703 Policy Core Lightweight Directory Access Protocol (LDAP) Schema
       http://www.ietf.org/rfc/rfc3703.txt

       This document defines a mapping of the Policy Core Information Model to
       a form that can be implemented in a directory that uses Lightweight
       Directory Access Protocol (LDAP) as its access protocol.	 This model
       defines two hierarchies of object classes: structural classes
       representing information for representing and controlling policy data
       as specified in RFC 3060, and relationship classes that indicate how
       instances of the structural classes are related to each other.  Classes
       are also added to the LDAP schema to improve the performance of a
       client's interactions with an LDAP server when the client is retrieving
       large amounts of policy-related information.  These classes exist only
       to optimize LDAP retrievals: there are no classes in the information
       model that correspond to them.

   RFC-3698 Lightweight Directory Access Protocol (LDAP): Additional Matching
       Rules
       http://www.ietf.org/rfc/rfc3698.txt

       This document provides a collection of matching rules for use with the
       Lightweight Directory Access Protocol (LDAP).  As these matching rules
       are simple adaptations of matching rules specified for use with the
       X.500 Directory, most are already in wide use.

   RFC-3687 Lightweight Directory Access Protocol (LDAP) and X.500 Component
       Matching Rules
       http://www.ietf.org/rfc/rfc3687.txt

       The syntaxes of attributes in a Lightweight Directory Access Protocol
       (LDAP) or X.500 directory range from simple data types, such as text
       string, integer, or boolean, to complex structured data types, such as
       the syntaxes of the directory schema operational attributes.  Matching
       rules defined for the complex syntaxes usually only provide the most
       immediately useful matching capability.	This document defines generic
       matching rules that can match any user selected component parts in an
       attribute value of any arbitrarily complex attribute syntax.

   RFC-3672 Subentries in the Lightweight Directory Access Protocol (LDAP)
       http://www.ietf.org/rfc/rfc3672.txt

       In X.500 directories, subentries are special entries used to hold
       information associated with a subtree or subtree refinement.  This
       document adapts X.500 subentries mechanisms for use with the
       Lightweight Directory Access Protocol (LDAP).

   RFC-3671 Collective Attributes in the Lightweight Directory Access Protocol
       (LDAP)
       http://www.ietf.org/rfc/rfc3671.txt

       X.500 collective attributes allow common characteristics to be shared
       between collections of entries.	This document summarizes the X.500
       information model for collective attributes and describes use of
       collective attributes in LDAP (Lightweight Directory Access Protocol).
       This document provides schema definitions for collective attributes for
       use in LDAP.

   RFC-3296 Named Subordinate References in Lightweight Directory Access
       Protocol (LDAP) Directories
       http://www.ietf.org/rfc/rfc3296.txt

       This document details schema and protocol elements for representing and
       managing named subordinate references in Lightweight Directory Access
       Protocol (LDAP) Directories.

   RFC-3062 LDAP Password Modify Extended Operation
       http://www.ietf.org/rfc/rfc3062.txt

       The integration of the Lightweight Directory Access Protocol (LDAP) and
       external authentication services has introduced non-DN authentication
       identities and allowed for non-directory storage of passwords.  As
       such, mechanisms which update the directory (e.g., Modify) cannot be
       used to change a user's password.  This document describes an LDAP
       extended operation to allow modification of user passwords which is not
       dependent upon the form of the authentication identity nor the password
       storage mechanism used.

   RFC-2891 LDAP Control Extension for Server Side Sorting of Search Results
       http://www.ietf.org/rfc/rfc2891.txt

       This document describes two LDAPv3 control extensions for server side
       sorting of search results. These controls allows a client to specify
       the attribute types and matching rules a server should use when
       returning the results to an LDAP search request. The controls may be
       useful when the LDAP client has limited functionality or for some other
       reason cannot sort the results but still needs them sorted. Other
       permissible controls on search operations are not defined in this
       extension.

   RFC-2849 The LDAP Data Interchange Format (LDIF) - Technical Specification
       http://www.ietf.org/rfc/rfc2849.txt

       This document describes a file format suitable for describing directory
       information or modifications made to directory information. The file
       format, known as LDIF, for LDAP Data Interchange Format, is typically
       used to import and export directory information between LDAP-based
       directory servers, or to describe a set of changes which are to be
       applied to a directory.

   RFC-2831 Using Digest Authentication as a SASL Mechanism
       http://www.ietf.org/rfc/rfc2831.txt

       This specification defines how HTTP Digest Authentication can be used
       as a SASL [RFC 2222] mechanism for any protocol that has a SASL
       profile. It is intended both as an improvement over CRAM-MD5 [RFC 2195]
       and as a convenient way to support a single authentication mechanism
       for web, mail, LDAP, and other protocols.

   RFC-2739 Calendar Attributes for vCard and LDAP
       http://www.ietf.org/rfc/rfc2739.txt

       When scheduling a calendar entity, such as an event, it is a
       prerequisite that an organizer has the calendar address of each
       attendee that will be invited to the event. Additionally, access to an
       attendee's current "busy time" provides an a priori indication of
       whether the attendee will be free to participate in the event. In order
       to meet these challenges, a calendar user agent (CUA) needs a mechanism
       to locate individual user's calendar and free/busy time. This memo
       defines three mechanisms for obtaining a URI to a user's calendar and
       free/busy time. These include:

   RFC-2589 Extensions for Dynamic Directory Services
       http://www.ietf.org/rfc/rfc2589.txt

       LDAP supports lightweight access to static directory services, allowing
       relatively fast search and update access. Static directory services
       store information about people that persists in its accuracy and value
       over a long period of time. Dynamic directory services are different in
       that they store information about people that only persists in its
       accuracy and value while people are online. Though the protocol
       operations and attributes used by dynamic directory services are
       similar to the ones used for static directory services, clients that
       are bound to a dynamic directory service need to periodically refresh
       their presence at the server to keep directory entries from getting
       stale in the presence of client application crashes. A flow control
       mechanism from the server is also described that allows a server to
       inform clients how often they should refresh their presence.

   RFC-2559 Internet X.509 Public Key Infrastructure Operational Protocols -
       LDAPv2
       http://www.ietf.org/rfc/rfc2559.txt

       The protocol described in this document is designed to satisfy some of
       the operational requirements within the Internet X.509 PKI.
       Specifically, this document addresses requirements to provide access to
       PKI repositories for the purposes of retrieving PKI information and
       managing that same information.	The mechanism described in this
       document is based on the LDAPv2, defined in RFC 1777, defining a
       profile of that protocol for use within the PKIX and updates encodings
       for certificates and revocation lists from RFC 1778. Additional
       mechanisms addressing PKIX operational requirements are specified in
       separate documents.

   RFC-2247 Using Domains in LDAP/X.500 Distinguished Names
       http://www.ietf.org/rfc/rfc2247.txt

       LDAP uses X.500-compatible distinguished names for providing unique
       identification of entries. This document defines an algorithm by which
       a name registered with the Internet Domain Name Service can be
       represented as an LDAP distinguished name.

   RFC-2222 Simple Authentication and Security Layer (SASL)
       http://www.ietf.org/rfc/rfc2222.txt

       This document describes a method for adding authentication support to
       connection-based protocols. To use this specification, a protocol
       includes a command for identifying and authenticating a user to a
       server and for optionally negotiating protection of subsequent protocol
       interactions. If its use is negotiated, a security layer is inserted
       between the protocol and the connection. This document describes how a
       protocol specifies such a command, defines several mechanisms for use
       by the command, and defines the protocol used for carrying a negotiated
       security layer over the connection.

   RFC-2218 A Common Schema for the Internet White Pages Service
       http://www.ietf.org/rfc/rfc2218.txt

       This IETF Integrated Directory Services(IDS) Working Group proposes a
       standard specification for a simple Internet White Pages service by
       defining a common schema for use by the various White Pages servers.
       This schema is independent of specific implementations of the White
       Pages service. This document specifies the minimum set of core
       attributes of a White Pages entry for an individual and describes how
       new objects with those attributes can be defined and published. It does
       not describe how to represent other objects in the White Pages service.
       Further, it does not address the search sort expectations within a
       particular service.

   RFC-2164 Use of an X.500/LDAP directory to support MIXER address mapping
       http://www.ietf.org/rfc/rfc2164.txt

       MIXER (RFC 2156) defines an algorithm for use of a set of global
       mapping between X.400 and RFC 822 addresses. This specification defines
       how to represent and maintain these mappings (MIXER Conformant Global
       Address Mappings of MCGAMs) in an X.500 or LDAP directory. Mechanisms
       for representing OR Address and Domain hierarchies within the DIT.
       These techniques are used to define two independent subtrees in the
       DIT, which contain the mapping information.

   RFC-2079 Definition of an X.500 Attribute Type and an Object Class to Hold
       Uniform Resource Identifiers
       http://www.ietf.org/rfc/rfc2079.txt

       URLs are being widely used to specify the location of Internet
       resources. There is an urgent need to be able to include URLs in
       directories that conform to the LDAP and X.500 information models, and
       a desire to include other types of URIs as they are defined. A number
       of independent groups are already experimenting with the inclusion of
       URLs in LDAP and X.500 directories. This document builds on the
       experimentation to date and defines a new attribute type and an
       auxiliary object class to allow URIs, including URLs, to be stored in
       directory entries in a standard way.

Other LDAP Related RFCs - Best Current Practice
   RFC-4521 Considerations for Lightweight Directory Access Protocol (LDAP)
       Extensions
       http://www.ietf.org/rfc/rfc4521.txt

       The Lightweight Directory Access Protocol (LDAP) is extensible.	It
       provides mechanisms for adding new operations, extending existing
       operations, and expanding user and system schemas.  This document
       discusses considerations for designers of LDAP extensions.

   RFC-4520 Internet Assigned Numbers Authority (IANA) Considerations for the
       Lightweight Directory Access Protocol (LDAP)
       http://www.ietf.org/rfc/rfc4520.txt

       This document provides procedures for registering extensible elements
       of the Lightweight Directory Access Protocol (LDAP).  The document also
       provides guidelines to the Internet Assigned Numbers Authority (IANA)
       describing conditions under which new values can be assigned.

   RFC-2148 Deployment of the Internet White Pages Service
       http://www.ietf.org/rfc/rfc2148.txt

       The Internet is used for information exchange and communication between
       its users. It can only be effective as such if users are able to find
       each other's addresses. Therefore the Internet benefits from an
       adequate White Pages Service, i.e., a directory service offering
       (Internet) address information related to people and organizations.

       This document describes the way in which the Internet White Pages
       Service (from now on abbreviated as IWPS) is best exploited using
       today's experience, today's protocols, today's products and today's
       procedures.

Other LDAP Related RFCs - Informational
   RFC-5803 Lightweight Directory Access Protocol (LDAP) Schema for Storing
       Salted Challenge Response Authentication Mechanism (SCRAM) Secrets
       http://www.ietf.org/rfc/rfc5803.txt

       This memo describes how the "authPassword" Lightweight Directory Access
       Protocol (LDAP) attribute can be used for storing secrets used by the
       Salted Challenge Response Authentication Mechanism (SCRAM) mechanism in
       the Simple Authentication and Security Layer (SASL) framework.

   RFC-4876 A Configuration Profile Schema for Lightweight Directory Access
       Protocol (LDAP)-Based Agents
       http://www.ietf.org/rfc/rfc4828.txt

       This document consists of two primary components, a schema for agents
       that make use of the Lightweight Directory Access protocol (LDAP) and a
       proposed use case of that schema, for distributed configuration of
       similar directory user agents.  A set of attribute types and an object
       class are proposed.  In the proposed use case, directory user agents
       (DUAs) can use this schema to determine directory data location and
       access parameters for specific services they support.  In addition, in
       the proposed use case, attribute and object class mapping allows DUAs
       to reconfigure their expected (default) schema to match that of the end
       user's environment.  This document is intended to be a skeleton for
       future documents that describe configuration of specific DUA services.

   RFC-4529 Requesting Attributes by Object Class in the Lightweight Directory
       Access Protocol (LDAP)
       http://www.ietf.org/rfc/rfc4829.txt

       The Lightweight Directory Access Protocol (LDAP) search operation
       provides mechanisms for clients to request all user application
       attributes, all operational attributes, and/or attributes selected by
       their description.  This document extends LDAP to support a mechanism
       that LDAP clients may use to request the return of all attributes of an
       object class.

   RFC-4525 Lightweight Directory Access Protocol (LDAP) Modify-Increment
       Extension
       http://www.ietf.org/rfc/rfc4525.txt

       This document describes an extension to the Lightweight Directory
       Access Protocol (LDAP) Modify operation to support an increment
       capability.  This extension is useful in provisioning applications,
       especially when combined with the assertion control and/or the pre-
       read or post-read control extension.

   RFC-4403 Lightweight Directory Access Protocol (LDAP) Schema for Universal
       Description, Discovery, and Integration version 3 (UDDIv3)
       http://www.ietf.org/rfc/rfc4403.txt

       This document defines the Lightweight Directory Access Protocol
       (LDAPv3) schema for representing Universal Description, Discovery, and
       Integration (UDDI) data types in an LDAP directory.  It defines the
       LDAP object class and attribute definitions and containment rules to
       model UDDI entities, defined in the UDDI version 3 information model,
       in an LDAPv3-compliant directory.

   RFC-4373 Lightweight Directory Access Protocol (LDAP) Bulk
       Update/Replication Protocol (LBURP)
       http://www.ietf.org/rfc/rfc4373.txt

       The Lightweight Directory Access Protocol (LDAP) Bulk
       Update/Replication Protocol (LBURP) allows an LDAP client to perform a
       bulk update to an LDAP server.  The protocol frames a sequenced set of
       update operations within a pair of LDAP extended operations to notify
       the server that the update operations in the framed set are related in
       such a way that the ordering of all operations can be preserved during
       processing even when they are sent asynchronously by the client.
       Update operations can be grouped within a single protocol message to
       maximize the efficiency of client-server communication.

       The protocol is suitable for efficiently making a substantial set of
       updates to the entries in an LDAP server.

   RFC-3944 H.350 Directory Services
       http://www.ietf.org/rfc/rfc3944.txt

       The International Telecommunications Union Standardization Sector (ITU-
       T) has created the H.350 series of Recommendations that specify
       directory services architectures in support of multimedia conferencing
       protocols.  The goal of the architecture is to 'directory enable'
       multimedia conferencing so that these services can leverage existing
       identity management and enterprise directories.	A particular goal is
       to enable an enterprise or service provider to maintain a canonical
       source of users and their multimedia conferencing systems, so that
       multiple call servers from multiple vendors, supporting multiple
       protocols, can all access the same data store.

       Because SIP is an IETF standard, the contents of H.350 and H.350.4 are
       made available via this document to the IETF community.	This document
       contains the entire normative text of ITU-T Recommendations H.350 and
       H.350.4 in sections 4 and 5, respectively.  The remaining sections are
       included only in this document, not in the ITU-T version.

   RFC-3829 Lightweight Directory Access Protocol (LDAP) Authorization
       Identity Request and Response Controls
       http://www.ietf.org/rfc/rfc3829.txt

       This document extends the Lightweight Directory Access Protocol (LDAP)
       bind operation with a mechanism for requesting and returning the
       authorization identity it establishes.  Specifically, this document
       defines the Authorization Identity Request and Response controls for
       use with the Bind operation.

   RFC-3712 Lightweight Directory Access Protocol (LDAP): Schema for Printer
       Services
       http://www.ietf.org/rfc/rfc3712.txt

       This document defines a schema, object classes and attributes, for
       printers and printer services, for use with directories that support
       Lightweight Directory Access Protocol v3 (LDAP-TS).  This document is
       based on the printer attributes listed in Appendix E of Internet
       Printing Protocol/1.1 (IPP) (RFC 2911).	A few additional printer
       attributes are based on definitions in the Printer MIB (RFC 1759).

   RFC-3494 Lightweight Directory Access Protocol version 2 (LDAPv2) to
       Historic Status
       http://www.ietf.org/rfc/rfc3494.txt

       This document recommends the retirement of version 2 of the Lightweight
       Directory Access Protocol (LDAPv2) and other dependent specifications,
       and discusses the reasons for doing so.	This document recommends RFC
       1777, 1778, 1779, 1781, and 2559 (as well as documents they superseded)
       be moved to Historic status.

   RFC-3384 Lightweight Directory Access Protocol (version 3) Replication
       Requirements
       http://www.ietf.org/rfc/rfc3384.txt

       This document discusses the fundamental requirements for replication of
       data accessible via the Lightweight Directory Access Protocol (version
       3) (LDAPv3).  It is intended to be a gathering place for general
       replication requirements needed to provide interoperability between
       informational directories.

   RFC-3112 LDAP Authentication Password Schema
       http://www.ietf.org/rfc/rfc3112.txt

       This document describes schema in support of user/password
       authentication in a LDAP (Lightweight Directory Access Protocol)
       directory including the authPassword attribute type.  This attribute
       type holds values derived from the user's password(s) (commonly using
       cryptographic strength one-way hash).  authPassword is intended to used
       instead of userPassword.

   RFC-3045 Storing Vendor Information in the LDAP root DSE
       http://www.ietf.org/rfc/rfc3045.txt

       This document specifies two Lightweight Directory Access Protocol
       (LDAP) attributes, vendorName and vendorVersion that MAY be included in
       the root DSA-specific Entry (DSE) to advertise vendor-specific
       information.  These two attributes supplement the attributes defined in
       section 3.4 of RFC 2251.

   RFC-2985 PKCS #9: Selected Object Classes and Attribute Types Version 2.0
       http://www.ietf.org/rfc/rfc2985.txt

       This memo provides a selection of object classes and attribute types
       for use in conjunction with public-key cryptography and Lightweight
       Directory Access Protocol (LDAP) accessible directories.	 It also
       includes ASN.1 syntax for all constructs.

   RFC-2967 TISDAG - Technical Infrastructure for Swedish Directory Access
       Gateways
       http://www.ietf.org/rfc/rfc2967.txt

       The strength of the TISDAG (Technical Infrastructure for Swedish
       Directory Access Gateways) project's DAG proposal is that it defines
       the necessary technical infrastructure to provide a single-access-
       point service for information on Swedish Internet users.	 The resulting
       service will provide uniform access for all information -- the same
       level of access to information (7x24 service), and the same information
       made available, irrespective of the service provider responsible for
       maintaining that information, their directory service protocols, or the
       end-user's client access protocol.

   RFC-2927 MIME Directory Profile for LDAP Schema
       http://www.ietf.org/rfc/rfc2927.txt

       This document defines a multipurpose internet mail extensions (MIME)
       directory profile for holding a lightweight directory access protocol
       (LDAP) schema.  It is intended for communication with the Internet
       schema listing service.

   RFC-2926 Conversion of LDAP Schemas to and from SLP Templates
       http://www.ietf.org/rfc/rfc2926.txt

       This document describes a procedure for mapping between Service
       Location Protocol (SLP) service advertisements and lightweight
       directory access protocol (LDAP) descriptions of services.  The
       document covers two aspects of the mapping.  One aspect is mapping
       between SLP service type templates and LDAP directory schema.  Because
       the SLP service type template grammar is relatively simple, mapping
       from service type templates to LDAP types is straightforward.  Mapping
       in the other direction is straightforward if the attributes are
       restricted to use just a few of the syntaxes defined in RFC 2252.  If
       arbitrary ASN.1 types occur in the schema, then the mapping is more
       complex and may even be impossible.  The second aspect is
       representation of service information in an LDAP directory.  The
       recommended representation simplifies interoperability with SLP by
       allowing SLP directory agents to backend into LDAP directory servers.
       The resulting system allows service advertisements to propagate easily
       between SLP and LDAP.

   RFC-2820 Access Control Requirements for LDAP
       http://www.ietf.org/rfc/rfc2820.txt

       This document describes the fundamental requirements of an access
       control list (ACL) model for the LDAP directory service.	 It is
       intended to be a gathering place for access control requirements needed
       to provide authorized access to and interoperability between
       directories.

   RFC-2798 Definition of the inetOrgPerson Object Class
       http://www.ietf.org/rfc/rfc2798.txt

       While the X.500 standards define many useful attribute types [X520] and
       object classes [X521], they do not define a person object class that
       meets the requirements found in today's Internet and Intranet directory
       service deployments. We define a new object class called inetOrgPerson
       for use in LDAP and X.500 directory services that extends the X.521
       standard organizationalPerson class to meet these needs.

   RFC-2714 Schema for Representing CORBA Objects in an LDAP Directory
       http://www.ietf.org/rfc/rfc2714.txt

       CORBA is the Common Object Request Broker Architecture defined by the
       Object Management Group. This document defines the schema for
       representing CORBA object references in an LDAP directory.

   RFC-2713 Schema for Representing Java Objects in an LDAP Directory
       http://www.ietf.org/rfc/rfc2713.txt

       This document defines the schema for representing Java objects in an
       LDAP directory. It defines schema elements to represent a Java
       serialized object, a Java marshalled object, a Java remote object, and
       a JNDI reference.

   RFC-2696 LDAP Control Extension for Simple Paged Results Manipulation
       http://www.ietf.org/rfc/rfc2696.txt

       This document describes an LDAPv3 control extension for simple paging
       of search results. This control extension allows a client to control
       the rate at which an LDAP server returns the results of an LDAP search
       operation. This control may be useful when the LDAP client has limited
       resources and may not be able to process the entire result set from a
       given LDAP query, or when the LDAP client is connected over a low-
       bandwidth connection. Other operations on the result set are not
       defined in this extension. This extension is not designed to provide
       more sophisticated result set management.

   RFC-1823 The LDAP Application Program Interface
       http://www.ietf.org/rfc/rfc1823.txt

       This document defines a C language application program interface to
       LDAP, which is designed to be powerful, yet simple to use. It defines
       compatible synchronous and asynchronous interfaces to LDAP to suit a
       wide variety of applications. This document gives a brief overview of
       the LDAP model, then an overview of how the API is used by an
       application program to obtain LDAP information. The API calls are
       described in detail, followed by an appendix that provides some example
       code demonstrating the use of the API.

Other LDAP Related RFCs - Experimental
   RFC-5805 Lightweight Directory Access Protocol (LDAP) Transactions
       http://www.ietf.org/rfc/rfc5805.txt

       Lightweight Directory Access Protocol (LDAP) update operations, such as
       Add, Delete, and Modify operations, have atomic, consistency,
       isolation, durability (ACID) properties.	 Each of these update
       operations act upon an entry.  It is often desirable to update two or
       more entries in a single unit of interaction, a transaction.
       Transactions are necessary to support a number of applications
       including resource provisioning.	 This document extends LDAP to support
       transactions.

   RFC-4533 The Lightweight Directory Access Protocol (LDAP) Content
       Synchronization Operation
       http://www.ietf.org/rfc/rfc4533.txt

       This specification describes the Lightweight Directory Access Protocol
       (LDAP) Content Synchronization Operation.  The operation allows a
       client to maintain a copy of a fragment of the Directory Information
       Tree (DIT).  It supports both polling for changes and listening for
       changes.	 The operation is defined as an extension of the LDAP Search
       Operation.

   RFC-4531 Lightweight Directory Access Protocol (LDAP) Turn Operation
       http://www.ietf.org/rfc/rfc4531.txt

       This specification describes a Lightweight Directory Access Protocol
       (LDAP) extended operation to reverse (or "turn") the roles of client
       and server for subsequent protocol exchanges in the session, or to
       enable each peer to act as both client and server with respect to the
       other.

   RFC-3663 Domain Administrative Data in Lightweight Directory Access
       Protocol (LDAP)
       http://www.ietf.org/rfc/rfc3663.txt

       Domain registration data has typically been exposed to the general
       public via Nicname/Whois for administrative purposes.  This document
       describes the Referral Lightweight Directory Access Protocol (LDAP)
       Service, an experimental service using LDAP and well-known LDAP types
       to make domain administrative data available.

   RFC-3088 OpenLDAP Root Service - An experimental LDAP referral service
       http://www.ietf.org/rfc/rfc3088.txt

       The OpenLDAP Project is operating an experimental LDAP (Lightweight
       Directory Access Protocol) referral service known as the "OpenLDAP Root
       Service".  The automated system generates referrals based upon service
       location information published in DNS SRV RRs (Domain Name System
       location of services resource records).	This document describes this
       service.

   RFC-2657 LDAPv2 Client vs. the Index Mesh
       http://www.ietf.org/rfc/rfc2657.txt

       LDAPv2 clients as implemented according to RFC 1777 have no notion of
       referral. The integration between such a client and an Index Mesh, as
       defined by the Common Indexing Protocol, heavily depends on referrals
       and therefore needs to be handled in a special way. This document
       defines one possible way of doing this.

   RFC-2649 Signed Directory Operations Using S/MIME
       http://www.ietf.org/rfc/rfc2649.txt

       This document defines an LDAPv3 based mechanism for signing directory
       operations in order to create a secure journal of changes that have
       been made to each directory entry. Both client and server based
       signatures are supported. An object class for subsequent retrieval are
       'journal entries' is also defined. This document specifies LDAPv3
       controls that enable this functionality. It also defines an LDAPv3
       schema that allows for subsequent browsing of the journal information.

   RFC-2307 An Approach for Using LDAP as a Network Information Service
       http://www.ietf.org/rfc/rfc2307.txt

       This document describes an experimental mechanism for mapping entities
       related to TCP/IP and the UNIX system into X.500 entries so that they
       may be resolved with the LDAP. A set of attribute types and object
       classes are proposed, along with specific guidelines for interpreting
       them. The intention is to assist the deployment of LDAP as an
       organizational nameservice.  No proposed solutions are intended as
       standards for the Internet. Rather, it is hoped that a general
       consensus will emerge as to the appropriate solution to such problems,
       leading eventually to the adoption of standards. The proposed mechanism
       has already been implemented with some success.

Expired but still interesting Internet Drafts
   draft-wahl-ldap-adminaddr -- Administrator Address Attribute
       Organizations running multiple directory servers need an ability for
       administrators to determine who is responsible for a particular server.
       This is conceptually similar to the 'sysContact' object of SNMP. The
       administratorsAddress attribute allows a server administrator to
       provide the contact information of the responsible party for an LDAP
       server. This can be used by management clients which are, for example,
       checking the state of a replication or referral topology, to provide a
       way for the user of the management client to send email to manager of a
       particular server.

   draft-zeilenga-ldap-noop -- The LDAP No-Op Control
       This document defines the Lightweight Directory Access Protocol (LDAP)
       No-Op control which can be used to disable the normal effect of an
       operation.  The control can be used to discover how a server might
       react to a particular update request without updating the directory.

   draft-legg-ldap-transfer -- Lightweight Directory Access Protocol (LDAP):
       Transfer Encoding Options
       Each attribute stored in a Lightweight Directory Access Protocol (LDAP)
       directory has a defined syntax (i.e., data type).  A syntax definition
       specifies how attribute values conforming to the syntax are normally
       represented when transferred in LDAP operations.	 This representation
       is referred to as the LDAP-specific encoding to distinguish it from
       other methods of encoding attribute values.  This document introduces a
       new category of attribute options, called transfer encoding options,
       that can be used to specify that the associated attribute values are
       encoded according to one of these other methods.

   draft-furuseth-ldap-untypedobject -- Structural object class 'namedObject'
       for LDAP/X.500
       This document defines an 'namedObject' structural object class for the
       Lightweight Directory Access Protocol (LDAP) and X.500.	This is useful
       for entries with no natural choice of structural object class, e.g. if
       an entry must exist even though its contents are uninteresting.

   draft-wahl-ldap-p3p -- P3P Policy Attributes for LDAP
       This document defines attributes that can be retrieved via Lightweight
       Directory Access Protocol version 3 (LDAP) requests, which contain URIs
       pointing to the privacy policy documents.  These documents describe the
       privacy policy concerning access to a directory server, and the privacy
       policies that apply to the contents of the directory (a subtree of
       entries).

   draft-chu-ldap-xordered -- Ordered Entries and Values in LDAP
       As LDAP is used more extensively for managing various kinds of data,
       one often encounters a need to preserve both the ordering and the
       content of data, despite the inherently unordered structure of entries
       and attribute values in the directory.  This document describes a
       scheme to attach ordering information to attributes in a directory so
       that the ordering may be preserved and propagated to other LDAP
       applications.

   draft-chu-ldap-logschema -- A Schema for Logging the LDAP Protocol
       In order to facilitate remote administration and auditing of LDAP
       server operation, it is desirable to provide the server's operational
       logs themselves as a searchable LDAP directory.	These logs may also be
       used as a persistent change log to support various replication
       mechanisms.  This document defines a schema that may be used to
       represent all of the requests that have been processed by an LDAP
       server.	It may be used by various applications for auditing, flight
       recorder, replication, and other purposes.

   draft-zeilenga-ldap-relax -- The LDAP Relax Rules Control
       This document defines the Lightweight Directory Access Protocol (LDAP)
       Relax Rules Control which allows a directory user agent (a client) to
       request the directory service temporarily relax enforcement of various
       data and service model rules.

   draft-gpaterno-dhcp-ldap -- DHCP Option for LDAP Directory Services
       discovery
       This document defines a new DHCP option for delivering configuration
       information for LDAP services. Through this option, the client receives
       an LDAP URL [8] of the closest available LDAP server/replica that can
       be used to authenticate users or look up any useful data.

   draft-schleiff-ldap-xri -- LDAP Schema for eXtensible Resource Identifier
       (XRI)
       This document describes Attribute Types and an Object Class for use in
       representing XRI (eXtensible Resource Identifier) values in LDAP
       (Lightweight Directory Access Protocol) and X.500 directory services.

   draft-wahl-ldap-session -- LDAP Session Tracking Control
       Many network devices, application servers, and middleware components of
       a enterprise software infrastructure generate some form of session
       tracking identifiers, which are useful when analyzing activity and
       accounting logs to group activity relating to a particular session.
       This document discusses how Lightweight Directory Access Protocol
       version 3 (LDAP) clients can include session tracking identifiers with
       their LDAP requests.  This information is provided through controls in
       the requests the clients send to LDAP servers.  The LDAP server
       receiving these controls can include the session tracking identifiers
       the the log messages it writes, enabling LDAP requests in the LDAP
       server's logs to be correlated with activity in logs of other
       components in the infrastructure.  The control also enables session
       tracking information to be generated by LDAP servers and returned to
       clients and other servers.  Three formats of session tracking
       identifiers are defined in this document.

   draft-wahl-ldap-subtree-source -- LDAP Subtree Data Source URI Attribute
       This document defines an attribute that enables administrative clients
       using the Lightweight Directory Access Protocol (LDAP) to determine the
       source of directory entries.

   draft-ietf-ldapext-psearch -- Persistent Search: A Simple LDAP Change
       Notification Mechanism
       This document defines two controls that extend the LDAPv3 search
       operation to provide a simple mechanism by which an LDAP client can
       receive notification of changes that occur in an LDAP server. The
       mechanism is designed to be very flexible yet easy for clients and
       servers to implement.

   draft-ietf-ldapext-ldapv3-vlv -- LDAP Extensions for Scrolling View
       Browsing of Search Results
       This document describes a Virtual List View control  extension  for
       the LDAP	 Search	 operation.  This control is designed to allow the
       "virtual list box" feature, common in existing  commercial  e-mail
       address	book applications, to be supported efficiently by LDAP
       servers. LDAP servers' inability to support this client feature is a
       significant impediment  to LDAP replacing proprietary protocols in
       commercial e-mail systems.

       The control allows a client to specify that the	server	return,	 for
       a given	LDAP search with associated sort keys, a contiguous subset of
       the search result set. This subset is specified in terms of offsets
       into the ordered list, or in terms of a greater than or equal
       comparison value.

Where to find the latest information
       Latest information on the RFCs and drafts around LDAP can be found at
       IETF's datatracker <https://datatracker.ietf.org>.

perl v5.18.1			  2013-10-18		     Net::LDAP::RFC(3)
[top]

List of man pages available for Mageia

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net