GD::Graph3d man page on OpenSuSE

Man page or keyword search:  
man Server   25941 pages
apropos Keyword Search (all sections)
Output format
OpenSuSE logo
[printable version]

GD::Graph3d(3)	      User Contributed Perl Documentation	GD::Graph3d(3)

NAME
       GD::Graph3D - Create 3D Graphs with GD and GD::Graph

SYNOPSIS
	       use GD::Graph::moduleName;
	       my @data = (
		  ["Sun", "Mon", "Tue", "Wed", "Thu", "Fri", "Sat"],
		  [ 1203,  3500,  3973,	 2859,	3012,  3423,  1230]
	       );
	       my $graph = new GD::Graph::moduleName( 400, 300 );
	       $graph->set(
		       x_label		 => 'Day of the week',
		       y_label		 => 'Number of hits',
		       title		 => 'Daily Summary of Web Site',
	       );
	       my $gd = $graph->plot( \@data );

       Where moduleName is one of "bars3d", "lines3d" or "pie3d".

DESCRIPTION
       This is the GD::Graph3d extensions module. It provides 3D graphs for
       the GD::Graph module by Martien Verbruggen, which in turn generates
       graph using Lincoln Stein's GD.pm.

       You use these modules just as you would any of the GD::Graph modules,
       except that they generate 3d-looking graphs. Each graph type is
       described below with only the options that are unique to the 3d
       version. The modules are based on their 2d versions (e.g.
       GD::Graph::bars3d works like GD::Graph::bars), and support all the
       options in those. Make sure to read the documentation on GD::Graph.

       GD::Graph::pie3d
	   This is merely a wrapper around GD::Graph::pie for consistency. It
	   also sets 3d pie mode by default (which GD::Graph does as of
	   version 1.22).  All options are exactly as in GD::Graph::pie.

       GD::Graph::bars3d
	   This works like GD::Graph::bars, but draws 3d bars. The following
	   settings are new or changed in GD::Graph::bars3d.

	   bar_depth
	       Sets the z-direction depth of the bars. This defaults to 10. If
	       you have a large number of bars or a small chart width, you may
	       want to change this.  A visually good value for this is
	       approximately width_of_chart / number_of_bars.

	   overwrite
	       In GD::Graph::bars, multiple series of bars are normally drawn
	       side-by-side.  You can set overwrite to 1 to tell it to draw
	       each series behind the previous one. By setting overwrite to 2
	       you can have them drawn on top of each other, that is the
	       series are stacked.

	   shading
	       By default this is set to '1' and will shade and highlight the
	       bars (and axes).	 The light source is at top-left-center which
	       scan well for most computer users. You can disable the shading
	       of bars and axes by specifying a false value for this option.

       GD::Graph::lines3d
	   This works like GD::Graph::lines, but draws 3d line. The following
	   settings are new or changed in GD::Graph::line3d.

	   line_depth
	       Sets the z-direction depth of the lines. This defaults to 10.
	       If you have a large number of bars or a small chart width, you
	       may want to change this.	 A visually good value for this is
	       approximately width_of_chart / number_of_bars.

	   shading
	       By default this is set to '1' and will shade and highlight the
	       line (and axes).	 The light source is at top-left-center which
	       scan well for most computer users. You can disable the shading
	       of lines and axes by specifiying a false value for this option.

	   trim_miter
	       By default this is set to '0'. If line_width is large, typical
	       zig-zag data lines may appear to exaggerated, due to the width
	       of the lines.  When trim_miter is set to '1', then acute-angled
	       segments are cut back (with an additional small rectangle on
	       top) to extend only half a line_width beyond the data points.

VERSION
       0.63 (6 December 2002)

INSTALLATION
       You will need to have the GD::Graph version 1.30 or later installed.
       You should also have Perl version 5.005 or 5.6 installed.

       To install, just do the normal:

	       perl Makefile.PL
	       make
	       make install

       The documentation is in GD::Graph::Graph3d.pod.

AUTHOR
       Jeremy Wadsack for Wadsack-Allen Digital Group.	<dgsupport at wadsack-
       allen dot com>

       Most of the modules are based on the GD::Graph modules by Martien
       Verbruggen.

LATEST RELEASE
       The latest release is available from CPAN: http://www.cpan.org/.

COPYRIGHT
       Copyright (c) 1999-2001 Wadsack-Allen. All rights reserved.

       Much of the original code is from GD::Graph:

       GIFgraph: Copyright (c) 1995-1999 Martien Verbruggen.

       Chart::PNGgraph: Copyright (c) 1999 Steve Bonds.

       GD::Graph: Copyright (c) 1999 Martien Verbruggen.

       This package is free software; you can redistribute it and/or modify it
       under the same terms as Perl itself.

perl v5.18.1			  2013-09-28			GD::Graph3d(3)
[top]

List of man pages available for OpenSuSE

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net