AnyEvent::Handle man page on Pidora

Man page or keyword search:  
man Server   31170 pages
apropos Keyword Search (all sections)
Output format
Pidora logo
[printable version]

AnyEvent::Handle(3)   User Contributed Perl Documentation  AnyEvent::Handle(3)

NAME
       AnyEvent::Handle - non-blocking I/O on streaming handles via AnyEvent

SYNOPSIS
	  use AnyEvent;
	  use AnyEvent::Handle;

	  my $cv = AnyEvent->condvar;

	  my $hdl; $hdl = new AnyEvent::Handle
	     fh => \*STDIN,
	     on_error => sub {
		my ($hdl, $fatal, $msg) = @_;
		warn "got error $msg\n";
		$hdl->destroy;
		$cv->send;
	     };

	  # send some request line
	  $hdl->push_write ("getinfo\015\012");

	  # read the response line
	  $hdl->push_read (line => sub {
	     my ($hdl, $line) = @_;
	     warn "got line <$line>\n";
	     $cv->send;
	  });

	  $cv->recv;

DESCRIPTION
       This module is a helper module to make it easier to do event-based I/O
       on stream-based filehandles (sockets, pipes or other stream things).

       The AnyEvent::Intro tutorial contains some well-documented
       AnyEvent::Handle examples.

       In the following, when the documentation refers to of "bytes" then this
       means characters. As sysread and syswrite are used for all I/O, their
       treatment of characters applies to this module as well.

       At the very minimum, you should specify "fh" or "connect", and the
       "on_error" callback.

       All callbacks will be invoked with the handle object as their first
       argument.

METHODS
       $handle = new AnyEvent::Handle fh => $filehandle, key => value...
	   The constructor supports these arguments (all as "key => value"
	   pairs).

	   fh => $filehandle	 ["fh" or "connect" MANDATORY]
	       The filehandle this AnyEvent::Handle object will operate on.
	       NOTE: The filehandle will be set to non-blocking mode (using
	       "AnyEvent::Util::fh_nonblocking") by the constructor and needs
	       to stay in that mode.

	   connect => [$host, $service]	     ["fh" or "connect" MANDATORY]
	       Try to connect to the specified host and service (port), using
	       "AnyEvent::Socket::tcp_connect". The $host additionally becomes
	       the default "peername".

	       You have to specify either this parameter, or "fh", above.

	       It is possible to push requests on the read and write queues,
	       and modify properties of the stream, even while
	       AnyEvent::Handle is connecting.

	       When this parameter is specified, then the "on_prepare",
	       "on_connect_error" and "on_connect" callbacks will be called
	       under the appropriate circumstances:

	       on_prepare => $cb->($handle)
		   This (rarely used) callback is called before a new
		   connection is attempted, but after the file handle has been
		   created. It could be used to prepare the file handle with
		   parameters required for the actual connect (as opposed to
		   settings that can be changed when the connection is already
		   established).

		   The return value of this callback should be the connect
		   timeout value in seconds (or 0, or "undef", or the empty
		   list, to indicate the default timeout is to be used).

	       on_connect => $cb->($handle, $host, $port, $retry->())
		   This callback is called when a connection has been
		   successfully established.

		   The actual numeric host and port (the socket peername) are
		   passed as parameters, together with a retry callback.

		   When, for some reason, the handle is not acceptable, then
		   calling $retry will continue with the next connection
		   target (in case of multi-homed hosts or SRV records there
		   can be multiple connection endpoints). At the time it is
		   called the read and write queues, eof status, tls status
		   and similar properties of the handle will have been reset.

		   In most cases, ignoring the $retry parameter is the way to
		   go.

	       on_connect_error => $cb->($handle, $message)
		   This callback is called when the connection could not be
		   established. $! will contain the relevant error code, and
		   $message a message describing it (usually the same as
		   "$!").

		   If this callback isn't specified, then "on_error" will be
		   called with a fatal error instead.

	   on_error => $cb->($handle, $fatal, $message)
	       This is the error callback, which is called when, well, some
	       error occured, such as not being able to resolve the hostname,
	       failure to connect or a read error.

	       Some errors are fatal (which is indicated by $fatal being
	       true). On fatal errors the handle object will be destroyed (by
	       a call to "-> destroy") after invoking the error callback
	       (which means you are free to examine the handle object).
	       Examples of fatal errors are an EOF condition with active (but
	       unsatisifable) read watchers ("EPIPE") or I/O errors. In cases
	       where the other side can close the connection at their will it
	       is often easiest to not report "EPIPE" errors in this callback.

	       AnyEvent::Handle tries to find an appropriate error code for
	       you to check against, but in some cases (TLS errors), this does
	       not work well. It is recommended to always output the $message
	       argument in human-readable error messages (it's usually the
	       same as "$!").

	       Non-fatal errors can be retried by simply returning, but it is
	       recommended to simply ignore this parameter and instead abondon
	       the handle object when this callback is invoked. Examples of
	       non-fatal errors are timeouts "ETIMEDOUT") or badly-formatted
	       data ("EBADMSG").

	       On callback entrance, the value of $! contains the operating
	       system error code (or "ENOSPC", "EPIPE", "ETIMEDOUT", "EBADMSG"
	       or "EPROTO").

	       While not mandatory, it is highly recommended to set this
	       callback, as you will not be notified of errors otherwise. The
	       default simply calls "croak".

	   on_read => $cb->($handle)
	       This sets the default read callback, which is called when data
	       arrives and no read request is in the queue (unlike read queue
	       callbacks, this callback will only be called when at least one
	       octet of data is in the read buffer).

	       To access (and remove data from) the read buffer, use the
	       "->rbuf" method or access the "$handle->{rbuf}" member
	       directly. Note that you must not enlarge or modify the read
	       buffer, you can only remove data at the beginning from it.

	       When an EOF condition is detected then AnyEvent::Handle will
	       first try to feed all the remaining data to the queued
	       callbacks and "on_read" before calling the "on_eof" callback.
	       If no progress can be made, then a fatal error will be raised
	       (with $! set to "EPIPE").

	       Note that, unlike requests in the read queue, an "on_read"
	       callback doesn't mean you require some data: if there is an EOF
	       and there are outstanding read requests then an error will be
	       flagged. With an "on_read" callback, the "on_eof" callback will
	       be invoked.

	   on_eof => $cb->($handle)
	       Set the callback to be called when an end-of-file condition is
	       detected, i.e. in the case of a socket, when the other side has
	       closed the connection cleanly, and there are no outstanding
	       read requests in the queue (if there are read requests, then an
	       EOF counts as an unexpected connection close and will be
	       flagged as an error).

	       For sockets, this just means that the other side has stopped
	       sending data, you can still try to write data, and, in fact,
	       one can return from the EOF callback and continue writing data,
	       as only the read part has been shut down.

	       If an EOF condition has been detected but no "on_eof" callback
	       has been set, then a fatal error will be raised with $! set to
	       <0>.

	   on_drain => $cb->($handle)
	       This sets the callback that is called when the write buffer
	       becomes empty (or when the callback is set and the buffer is
	       empty already).

	       To append to the write buffer, use the "->push_write" method.

	       This callback is useful when you don't want to put all of your
	       write data into the queue at once, for example, when you want
	       to write the contents of some file to the socket you might not
	       want to read the whole file into memory and push it into the
	       queue, but instead only read more data from the file when the
	       write queue becomes empty.

	   timeout => $fractional_seconds
	   rtimeout => $fractional_seconds
	   wtimeout => $fractional_seconds
	       If non-zero, then these enables an "inactivity" timeout:
	       whenever this many seconds pass without a successful read or
	       write on the underlying file handle (or a call to
	       "timeout_reset"), the "on_timeout" callback will be invoked
	       (and if that one is missing, a non-fatal "ETIMEDOUT" error will
	       be raised).

	       There are three variants of the timeouts that work fully
	       independent of each other, for both read and write, just read,
	       and just write: "timeout", "rtimeout" and "wtimeout", with
	       corresponding callbacks "on_timeout", "on_rtimeout" and
	       "on_wtimeout", and reset functions "timeout_reset",
	       "rtimeout_reset", and "wtimeout_reset".

	       Note that timeout processing is also active when you currently
	       do not have any outstanding read or write requests: If you plan
	       to keep the connection idle then you should disable the timout
	       temporarily or ignore the timeout in the "on_timeout" callback,
	       in which case AnyEvent::Handle will simply restart the timeout.

	       Zero (the default) disables this timeout.

	   on_timeout => $cb->($handle)
	       Called whenever the inactivity timeout passes. If you return
	       from this callback, then the timeout will be reset as if some
	       activity had happened, so this condition is not fatal in any
	       way.

	   rbuf_max => <bytes>
	       If defined, then a fatal error will be raised (with $! set to
	       "ENOSPC") when the read buffer ever (strictly) exceeds this
	       size. This is useful to avoid some forms of denial-of-service
	       attacks.

	       For example, a server accepting connections from untrusted
	       sources should be configured to accept only so-and-so much data
	       that it cannot act on (for example, when expecting a line, an
	       attacker could send an unlimited amount of data without a
	       callback ever being called as long as the line isn't finished).

	   autocork => <boolean>
	       When disabled (the default), then "push_write" will try to
	       immediately write the data to the handle, if possible. This
	       avoids having to register a write watcher and wait for the next
	       event loop iteration, but can be inefficient if you write
	       multiple small chunks (on the wire, this disadvantage is
	       usually avoided by your kernel's nagle algorithm, see
	       "no_delay", but this option can save costly syscalls).

	       When enabled, then writes will always be queued till the next
	       event loop iteration. This is efficient when you do many small
	       writes per iteration, but less efficient when you do a single
	       write only per iteration (or when the write buffer often is
	       full). It also increases write latency.

	   no_delay => <boolean>
	       When doing small writes on sockets, your operating system
	       kernel might wait a bit for more data before actually sending
	       it out. This is called the Nagle algorithm, and usually it is
	       beneficial.

	       In some situations you want as low a delay as possible, which
	       can be accomplishd by setting this option to a true value.

	       The default is your opertaing system's default behaviour (most
	       likely enabled), this option explicitly enables or disables it,
	       if possible.

	   keepalive => <boolean>
	       Enables (default disable) the SO_KEEPALIVE option on the stream
	       socket: normally, TCP connections have no time-out once
	       established, so TCP connections, once established, can stay
	       alive forever even when the other side has long gone. TCP
	       keepalives are a cheap way to take down long-lived TCP
	       connections whent he other side becomes unreachable. While the
	       default is OS-dependent, TCP keepalives usually kick in after
	       around two hours, and, if the other side doesn't reply, take
	       down the TCP connection some 10 to 15 minutes later.

	       It is harmless to specify this option for file handles that do
	       not support keepalives, and enabling it on connections that are
	       potentially long-lived is usually a good idea.

	   oobinline => <boolean>
	       BSD majorly fucked up the implementation of TCP urgent data.
	       The result is that almost no OS implements TCP according to the
	       specs, and every OS implements it slightly differently.

	       If you want to handle TCP urgent data, then setting this flag
	       (the default is enabled) gives you the most portable way of
	       getting urgent data, by putting it into the stream.

	       Since BSD emulation of OOB data on top of TCP's urgent data can
	       have security implications, AnyEvent::Handle sets this flag
	       automatically unless explicitly specified. Note that setting
	       this flag after establishing a connection may be a bit too late
	       (data loss could already have occured on BSD systems), but at
	       least it will protect you from most attacks.

	   read_size => <bytes>
	       The default read block size (the amount of bytes this module
	       will try to read during each loop iteration, which affects
	       memory requirements). Default: 8192.

	   low_water_mark => <bytes>
	       Sets the amount of bytes (default: 0) that make up an "empty"
	       write buffer: If the write reaches this size or gets even
	       samller it is considered empty.

	       Sometimes it can be beneficial (for performance reasons) to add
	       data to the write buffer before it is fully drained, but this
	       is a rare case, as the operating system kernel usually buffers
	       data as well, so the default is good in almost all cases.

	   linger => <seconds>
	       If non-zero (default: 3600), then the destructor of the
	       AnyEvent::Handle object will check whether there is still
	       outstanding write data and will install a watcher that will
	       write this data to the socket. No errors will be reported (this
	       mostly matches how the operating system treats outstanding data
	       at socket close time).

	       This will not work for partial TLS data that could not be
	       encoded yet. This data will be lost. Calling the "stoptls"
	       method in time might help.

	   peername => $string
	       A string used to identify the remote site - usually the DNS
	       hostname (not IDN!) used to create the connection, rarely the
	       IP address.

	       Apart from being useful in error messages, this string is also
	       used in TLS peername verification (see "verify_peername" in
	       AnyEvent::TLS). This verification will be skipped when
	       "peername" is not specified or "undef".

	   tls => "accept" | "connect" | Net::SSLeay::SSL object
	       When this parameter is given, it enables TLS (SSL) mode, that
	       means AnyEvent will start a TLS handshake as soon as the
	       connection has been established and will transparently
	       encrypt/decrypt data afterwards.

	       All TLS protocol errors will be signalled as "EPROTO", with an
	       appropriate error message.

	       TLS mode requires Net::SSLeay to be installed (it will be
	       loaded automatically when you try to create a TLS handle): this
	       module doesn't have a dependency on that module, so if your
	       module requires it, you have to add the dependency yourself.

	       Unlike TCP, TLS has a server and client side: for the TLS
	       server side, use "accept", and for the TLS client side of a
	       connection, use "connect" mode.

	       You can also provide your own TLS connection object, but you
	       have to make sure that you call either
	       "Net::SSLeay::set_connect_state" or
	       "Net::SSLeay::set_accept_state" on it before you pass it to
	       AnyEvent::Handle. Also, this module will take ownership of this
	       connection object.

	       At some future point, AnyEvent::Handle might switch to another
	       TLS implementation, then the option to use your own session
	       object will go away.

	       IMPORTANT: since Net::SSLeay "objects" are really only
	       integers, passing in the wrong integer will lead to certain
	       crash. This most often happens when one uses a stylish "tls =>
	       1" and is surprised about the segmentation fault.

	       See the "->starttls" method for when need to start TLS
	       negotiation later.

	   tls_ctx => $anyevent_tls
	       Use the given "AnyEvent::TLS" object to create the new TLS
	       connection (unless a connection object was specified directly).
	       If this parameter is missing, then AnyEvent::Handle will use
	       "AnyEvent::Handle::TLS_CTX".

	       Instead of an object, you can also specify a hash reference
	       with "key => value" pairs. Those will be passed to
	       AnyEvent::TLS to create a new TLS context object.

	   on_starttls => $cb->($handle, $success[, $error_message])
	       This callback will be invoked when the TLS/SSL handshake has
	       finished. If $success is true, then the TLS handshake
	       succeeded, otherwise it failed ("on_stoptls" will not be called
	       in this case).

	       The session in "$handle->{tls}" can still be examined in this
	       callback, even when the handshake was not successful.

	       TLS handshake failures will not cause "on_error" to be invoked
	       when this callback is in effect, instead, the error message
	       will be passed to "on_starttls".

	       Without this callback, handshake failures lead to "on_error"
	       being called, as normal.

	       Note that you cannot call "starttls" right again in this
	       callback. If you need to do that, start an zero-second timer
	       instead whose callback can then call "->starttls" again.

	   on_stoptls => $cb->($handle)
	       When a SSLv3/TLS shutdown/close notify/EOF is detected and this
	       callback is set, then it will be invoked after freeing the TLS
	       session. If it is not, then a TLS shutdown condition will be
	       treated like a normal EOF condition on the handle.

	       The session in "$handle->{tls}" can still be examined in this
	       callback.

	       This callback will only be called on TLS shutdowns, not when
	       the underlying handle signals EOF.

	   json => JSON or JSON::XS object
	       This is the json coder object used by the "json" read and write
	       types.

	       If you don't supply it, then AnyEvent::Handle will create and
	       use a suitable one (on demand), which will write and expect
	       UTF-8 encoded JSON texts.

	       Note that you are responsible to depend on the JSON module if
	       you want to use this functionality, as AnyEvent does not have a
	       dependency itself.

       $fh = $handle->fh
	   This method returns the file handle used to create the
	   AnyEvent::Handle object.

       $handle->on_error ($cb)
	   Replace the current "on_error" callback (see the "on_error"
	   constructor argument).

       $handle->on_eof ($cb)
	   Replace the current "on_eof" callback (see the "on_eof" constructor
	   argument).

       $handle->on_timeout ($cb)
       $handle->on_rtimeout ($cb)
       $handle->on_wtimeout ($cb)
	   Replace the current "on_timeout", "on_rtimeout" or "on_wtimeout"
	   callback, or disables the callback (but not the timeout) if $cb =
	   "undef". See the "timeout" constructor argument and method.

       $handle->autocork ($boolean)
	   Enables or disables the current autocork behaviour (see "autocork"
	   constructor argument). Changes will only take effect on the next
	   write.

       $handle->no_delay ($boolean)
	   Enables or disables the "no_delay" setting (see constructor
	   argument of the same name for details).

       $handle->keepalive ($boolean)
	   Enables or disables the "keepalive" setting (see constructor
	   argument of the same name for details).

       $handle->oobinline ($boolean)
	   Enables or disables the "oobinline" setting (see constructor
	   argument of the same name for details).

       $handle->keepalive ($boolean)
	   Enables or disables the "keepalive" setting (see constructor
	   argument of the same name for details).

       $handle->on_starttls ($cb)
	   Replace the current "on_starttls" callback (see the "on_starttls"
	   constructor argument).

       $handle->on_stoptls ($cb)
	   Replace the current "on_stoptls" callback (see the "on_stoptls"
	   constructor argument).

       $handle->rbuf_max ($max_octets)
	   Configures the "rbuf_max" setting ("undef" disables it).

       $handle->timeout ($seconds)
       $handle->rtimeout ($seconds)
       $handle->wtimeout ($seconds)
	   Configures (or disables) the inactivity timeout.

       $handle->timeout_reset
       $handle->rtimeout_reset
       $handle->wtimeout_reset
	   Reset the activity timeout, as if data was received or sent.

	   These methods are cheap to call.

   WRITE QUEUE
       AnyEvent::Handle manages two queues per handle, one for writing and one
       for reading.

       The write queue is very simple: you can add data to its end, and
       AnyEvent::Handle will automatically try to get rid of it for you.

       When data could be written and the write buffer is shorter then the low
       water mark, the "on_drain" callback will be invoked.

       $handle->on_drain ($cb)
	   Sets the "on_drain" callback or clears it (see the description of
	   "on_drain" in the constructor).

	   This method may invoke callbacks (and therefore the handle might be
	   destroyed after it returns).

       $handle->push_write ($data)
	   Queues the given scalar to be written. You can push as much data as
	   you want (only limited by the available memory), as
	   "AnyEvent::Handle" buffers it independently of the kernel.

	   This method may invoke callbacks (and therefore the handle might be
	   destroyed after it returns).

       $handle->push_write (type => @args)
	   Instead of formatting your data yourself, you can also let this
	   module do the job by specifying a type and type-specific arguments.
	   You can also specify the (fully qualified) name of a package, in
	   which case AnyEvent tries to load the package and then expects to
	   find the "anyevent_read_type" function inside (see "custom write
	   types", below).

	   Predefined types are (if you have ideas for additional types, feel
	   free to drop by and tell us):

	   netstring => $string
	       Formats the given value as netstring
	       (http://cr.yp.to/proto/netstrings.txt, this is not a
	       recommendation to use them).

	   packstring => $format, $data
	       An octet string prefixed with an encoded length. The encoding
	       $format uses the same format as a Perl "pack" format, but must
	       specify a single integer only (only one of "cCsSlLqQiInNvVjJw"
	       is allowed, plus an optional "!", "<" or ">" modifier).

	   json => $array_or_hashref
	       Encodes the given hash or array reference into a JSON object.
	       Unless you provide your own JSON object, this means it will be
	       encoded to JSON text in UTF-8.

	       JSON objects (and arrays) are self-delimiting, so you can write
	       JSON at one end of a handle and read them at the other end
	       without using any additional framing.

	       The generated JSON text is guaranteed not to contain any
	       newlines: While this module doesn't need delimiters after or
	       between JSON texts to be able to read them, many other
	       languages depend on that.

	       A simple RPC protocol that interoperates easily with others is
	       to send JSON arrays (or objects, although arrays are usually
	       the better choice as they mimic how function argument passing
	       works) and a newline after each JSON text:

		  $handle->push_write (json => ["method", "arg1", "arg2"]); # whatever
		  $handle->push_write ("\012");

	       An AnyEvent::Handle receiver would simply use the "json" read
	       type and rely on the fact that the newline will be skipped as
	       leading whitespace:

		  $handle->push_read (json => sub { my $array = $_[1]; ... });

	       Other languages could read single lines terminated by a newline
	       and pass this line into their JSON decoder of choice.

	   storable => $reference
	       Freezes the given reference using Storable and writes it to the
	       handle. Uses the "nfreeze" format.

       $handle->push_shutdown
	   Sometimes you know you want to close the socket after writing your
	   data before it was actually written. One way to do that is to
	   replace your "on_drain" handler by a callback that shuts down the
	   socket (and set "low_water_mark" to 0). This method is a shorthand
	   for just that, and replaces the "on_drain" callback with:

	      sub { shutdown $_[0]{fh}, 1 }    # for push_shutdown

	   This simply shuts down the write side and signals an EOF condition
	   to the the peer.

	   You can rely on the normal read queue and "on_eof" handling
	   afterwards. This is the cleanest way to close a connection.

	   This method may invoke callbacks (and therefore the handle might be
	   destroyed after it returns).

       custom write types - Package::anyevent_write_type $handle, @args
	   Instead of one of the predefined types, you can also specify the
	   name of a package. AnyEvent will try to load the package and then
	   expects to find a function named "anyevent_write_type" inside. If
	   it isn't found, it progressively tries to load the parent package
	   until it either finds the function (good) or runs out of packages
	   (bad).

	   Whenever the given "type" is used, "push_write" will the function
	   with the handle object and the remaining arguments.

	   The function is supposed to return a single octet string that will
	   be appended to the write buffer, so you cna mentally treat this
	   function as a "arguments to on-the-wire-format" converter.

	   Example: implement a custom write type "join" that joins the
	   remaining arguments using the first one.

	      $handle->push_write (My::Type => " ", 1,2,3);

	      # uses the following package, which can be defined in the "My::Type" or in
	      # the "My" modules to be auto-loaded, or just about anywhere when the
	      # My::Type::anyevent_write_type is defined before invoking it.

	      package My::Type;

	      sub anyevent_write_type {
		 my ($handle, $delim, @args) = @_;

		 join $delim, @args
	      }

   READ QUEUE
       AnyEvent::Handle manages two queues per handle, one for writing and one
       for reading.

       The read queue is more complex than the write queue. It can be used in
       two ways, the "simple" way, using only "on_read" and the "complex" way,
       using a queue.

       In the simple case, you just install an "on_read" callback and whenever
       new data arrives, it will be called. You can then remove some data (if
       enough is there) from the read buffer ("$handle->rbuf"). Or you cna
       leave the data there if you want to accumulate more (e.g. when only a
       partial message has been received so far).

       In the more complex case, you want to queue multiple callbacks. In this
       case, AnyEvent::Handle will call the first queued callback each time
       new data arrives (also the first time it is queued) and removes it when
       it has done its job (see "push_read", below).

       This way you can, for example, push three line-reads, followed by
       reading a chunk of data, and AnyEvent::Handle will execute them in
       order.

       Example 1: EPP protocol parser. EPP sends 4 byte length info, followed
       by the specified number of bytes which give an XML datagram.

	  # in the default state, expect some header bytes
	  $handle->on_read (sub {
	     # some data is here, now queue the length-header-read (4 octets)
	     shift->unshift_read (chunk => 4, sub {
		# header arrived, decode
		my $len = unpack "N", $_[1];

		# now read the payload
		shift->unshift_read (chunk => $len, sub {
		   my $xml = $_[1];
		   # handle xml
		});
	     });
	  });

       Example 2: Implement a client for a protocol that replies either with
       "OK" and another line or "ERROR" for the first request that is sent,
       and 64 bytes for the second request. Due to the availability of a
       queue, we can just pipeline sending both requests and manipulate the
       queue as necessary in the callbacks.

       When the first callback is called and sees an "OK" response, it will
       "unshift" another line-read. This line-read will be queued before the
       64-byte chunk callback.

	  # request one, returns either "OK + extra line" or "ERROR"
	  $handle->push_write ("request 1\015\012");

	  # we expect "ERROR" or "OK" as response, so push a line read
	  $handle->push_read (line => sub {
	     # if we got an "OK", we have to _prepend_ another line,
	     # so it will be read before the second request reads its 64 bytes
	     # which are already in the queue when this callback is called
	     # we don't do this in case we got an error
	     if ($_[1] eq "OK") {
		$_[0]->unshift_read (line => sub {
		   my $response = $_[1];
		   ...
		});
	     }
	  });

	  # request two, simply returns 64 octets
	  $handle->push_write ("request 2\015\012");

	  # simply read 64 bytes, always
	  $handle->push_read (chunk => 64, sub {
	     my $response = $_[1];
	     ...
	  });

       $handle->on_read ($cb)
	   This replaces the currently set "on_read" callback, or clears it
	   (when the new callback is "undef"). See the description of
	   "on_read" in the constructor.

	   This method may invoke callbacks (and therefore the handle might be
	   destroyed after it returns).

       $handle->rbuf
	   Returns the read buffer (as a modifiable lvalue).

	   You can access the read buffer directly as the "->{rbuf}" member,
	   if you want. However, the only operation allowed on the read buffer
	   (apart from looking at it) is removing data from its beginning.
	   Otherwise modifying or appending to it is not allowed and will lead
	   to hard-to-track-down bugs.

	   NOTE: The read buffer should only be used or modified if the
	   "on_read", "push_read" or "unshift_read" methods are used. The
	   other read methods automatically manage the read buffer.

       $handle->push_read ($cb)
       $handle->unshift_read ($cb)
	   Append the given callback to the end of the queue ("push_read") or
	   prepend it ("unshift_read").

	   The callback is called each time some additional read data arrives.

	   It must check whether enough data is in the read buffer already.

	   If not enough data is available, it must return the empty list or a
	   false value, in which case it will be called repeatedly until
	   enough data is available (or an error condition is detected).

	   If enough data was available, then the callback must remove all
	   data it is interested in (which can be none at all) and return a
	   true value. After returning true, it will be removed from the
	   queue.

	   These methods may invoke callbacks (and therefore the handle might
	   be destroyed after it returns).

       $handle->push_read (type => @args, $cb)
       $handle->unshift_read (type => @args, $cb)
	   Instead of providing a callback that parses the data itself you can
	   chose between a number of predefined parsing formats, for chunks of
	   data, lines etc. You can also specify the (fully qualified) name of
	   a package, in which case AnyEvent tries to load the package and
	   then expects to find the "anyevent_read_type" function inside (see
	   "custom read types", below).

	   Predefined types are (if you have ideas for additional types, feel
	   free to drop by and tell us):

	   chunk => $octets, $cb->($handle, $data)
	       Invoke the callback only once $octets bytes have been read.
	       Pass the data read to the callback. The callback will never be
	       called with less data.

	       Example: read 2 bytes.

		  $handle->push_read (chunk => 2, sub {
		     warn "yay ", unpack "H*", $_[1];
		  });

	   line => [$eol, ]$cb->($handle, $line, $eol)
	       The callback will be called only once a full line (including
	       the end of line marker, $eol) has been read. This line
	       (excluding the end of line marker) will be passed to the
	       callback as second argument ($line), and the end of line marker
	       as the third argument ($eol).

	       The end of line marker, $eol, can be either a string, in which
	       case it will be interpreted as a fixed record end marker, or it
	       can be a regex object (e.g. created by "qr"), in which case it
	       is interpreted as a regular expression.

	       The end of line marker argument $eol is optional, if it is
	       missing (NOT undef), then "qr|\015?\012|" is used (which is
	       good for most internet protocols).

	       Partial lines at the end of the stream will never be returned,
	       as they are not marked by the end of line marker.

	   regex => $accept[, $reject[, $skip], $cb->($handle, $data)
	       Makes a regex match against the regex object $accept and
	       returns everything up to and including the match.

	       Example: read a single line terminated by '\n'.

		  $handle->push_read (regex => qr<\n>, sub { ... });

	       If $reject is given and not undef, then it determines when the
	       data is to be rejected: it is matched against the data when the
	       $accept regex does not match and generates an "EBADMSG" error
	       when it matches. This is useful to quickly reject wrong data
	       (to avoid waiting for a timeout or a receive buffer overflow).

	       Example: expect a single decimal number followed by whitespace,
	       reject anything else (not the use of an anchor).

		  $handle->push_read (regex => qr<^[0-9]+\s>, qr<[^0-9]>, sub { ... });

	       If $skip is given and not "undef", then it will be matched
	       against the receive buffer when neither $accept nor $reject
	       match, and everything preceding and including the match will be
	       accepted unconditionally. This is useful to skip large amounts
	       of data that you know cannot be matched, so that the $accept or
	       $reject regex do not have to start matching from the beginning.
	       This is purely an optimisation and is usually worth only when
	       you expect more than a few kilobytes.

	       Example: expect a http header, which ends at
	       "\015\012\015\012". Since we expect the header to be very large
	       (it isn't in practise, but...), we use a skip regex to skip
	       initial portions. The skip regex is tricky in that it only
	       accepts something not ending in either \015 or \012, as these
	       are required for the accept regex.

		  $handle->push_read (regex =>
		     qr<\015\012\015\012>,
		     undef, # no reject
		     qr<^.*[^\015\012]>,
		     sub { ... });

	   netstring => $cb->($handle, $string)
	       A netstring (http://cr.yp.to/proto/netstrings.txt, this is not
	       an endorsement).

	       Throws an error with $! set to EBADMSG on format violations.

	   packstring => $format, $cb->($handle, $string)
	       An octet string prefixed with an encoded length. The encoding
	       $format uses the same format as a Perl "pack" format, but must
	       specify a single integer only (only one of "cCsSlLqQiInNvVjJw"
	       is allowed, plus an optional "!", "<" or ">" modifier).

	       For example, DNS over TCP uses a prefix of "n" (2 octet network
	       order), EPP uses a prefix of "N" (4 octtes).

	       Example: read a block of data prefixed by its length in BER-
	       encoded format (very efficient).

		  $handle->push_read (packstring => "w", sub {
		     my ($handle, $data) = @_;
		  });

	   json => $cb->($handle, $hash_or_arrayref)
	       Reads a JSON object or array, decodes it and passes it to the
	       callback. When a parse error occurs, an "EBADMSG" error will be
	       raised.

	       If a "json" object was passed to the constructor, then that
	       will be used for the final decode, otherwise it will create a
	       JSON coder expecting UTF-8.

	       This read type uses the incremental parser available with JSON
	       version 2.09 (and JSON::XS version 2.2) and above. You have to
	       provide a dependency on your own: this module will load the
	       JSON module, but AnyEvent does not depend on it itself.

	       Since JSON texts are fully self-delimiting, the "json" read and
	       write types are an ideal simple RPC protocol: just exchange
	       JSON datagrams. See the "json" write type description, above,
	       for an actual example.

	   storable => $cb->($handle, $ref)
	       Deserialises a Storable frozen representation as written by the
	       "storable" write type (BER-encoded length prefix followed by
	       nfreeze'd data).

	       Raises "EBADMSG" error if the data could not be decoded.

       custom read types - Package::anyevent_read_type $handle, $cb, @args
	   Instead of one of the predefined types, you can also specify the
	   name of a package. AnyEvent will try to load the package and then
	   expects to find a function named "anyevent_read_type" inside. If it
	   isn't found, it progressively tries to load the parent package
	   until it either finds the function (good) or runs out of packages
	   (bad).

	   Whenever this type is used, "push_read" will invoke the function
	   with the handle object, the original callback and the remaining
	   arguments.

	   The function is supposed to return a callback (usually a closure)
	   that works as a plain read callback (see "->push_read ($cb)"), so
	   you can mentally treat the function as a "configurable read type to
	   read callback" converter.

	   It should invoke the original callback when it is done reading
	   (remember to pass $handle as first argument as all other callbacks
	   do that, although there is no strict requirement on this).

	   For examples, see the source of this module (perldoc -m
	   AnyEvent::Handle, search for "register_read_type")).

       $handle->stop_read
       $handle->start_read
	   In rare cases you actually do not want to read anything from the
	   socket. In this case you can call "stop_read". Neither "on_read"
	   nor any queued callbacks will be executed then. To start reading
	   again, call "start_read".

	   Note that AnyEvent::Handle will automatically "start_read" for you
	   when you change the "on_read" callback or push/unshift a read
	   callback, and it will automatically "stop_read" for you when
	   neither "on_read" is set nor there are any read requests in the
	   queue.

	   These methods will have no effect when in TLS mode (as TLS doesn't
	   support half-duplex connections).

       $handle->starttls ($tls[, $tls_ctx])
	   Instead of starting TLS negotiation immediately when the
	   AnyEvent::Handle object is created, you can also do that at a later
	   time by calling "starttls".

	   Starting TLS is currently an asynchronous operation - when you push
	   some write data and then call "->starttls" then TLS negotiation
	   will start immediately, after which the queued write data is then
	   sent.

	   The first argument is the same as the "tls" constructor argument
	   (either "connect", "accept" or an existing Net::SSLeay object).

	   The second argument is the optional "AnyEvent::TLS" object that is
	   used when AnyEvent::Handle has to create its own TLS connection
	   object, or a hash reference with "key => value" pairs that will be
	   used to construct a new context.

	   The TLS connection object will end up in "$handle->{tls}", the TLS
	   context in "$handle->{tls_ctx}" after this call and can be used or
	   changed to your liking. Note that the handshake might have already
	   started when this function returns.

	   Due to bugs in OpenSSL, it might or might not be possible to do
	   multiple handshakes on the same stream. Best do not attempt to use
	   the stream after stopping TLS.

	   This method may invoke callbacks (and therefore the handle might be
	   destroyed after it returns).

       $handle->stoptls
	   Shuts down the SSL connection - this makes a proper EOF handshake
	   by sending a close notify to the other side, but since OpenSSL
	   doesn't support non-blocking shut downs, it is not guaranteed that
	   you can re-use the stream afterwards.

	   This method may invoke callbacks (and therefore the handle might be
	   destroyed after it returns).

       $handle->destroy
	   Shuts down the handle object as much as possible - this call
	   ensures that no further callbacks will be invoked and as many
	   resources as possible will be freed. Any method you will call on
	   the handle object after destroying it in this way will be silently
	   ignored (and it will return the empty list).

	   Normally, you can just "forget" any references to an
	   AnyEvent::Handle object and it will simply shut down. This works in
	   fatal error and EOF callbacks, as well as code outside. It does NOT
	   work in a read or write callback, so when you want to destroy the
	   AnyEvent::Handle object from within such an callback. You MUST call
	   "->destroy" explicitly in that case.

	   Destroying the handle object in this way has the advantage that
	   callbacks will be removed as well, so if those are the only
	   reference holders (as is common), then one doesn't need to do
	   anything special to break any reference cycles.

	   The handle might still linger in the background and write out
	   remaining data, as specified by the "linger" option, however.

       $handle->destroyed
	   Returns false as long as the handle hasn't been destroyed by a call
	   to "->destroy", true otherwise.

	   Can be useful to decide whether the handle is still valid after
	   some callback possibly destroyed the handle. For example,
	   "->push_write", "->starttls" and other methods can call user
	   callbacks, which in turn can destroy the handle, so work can be
	   avoided by checking sometimes:

	      $hdl->starttls ("accept");
	      return if $hdl->destroyed;
	      $hdl->push_write (...

	   Note that the call to "push_write" will silently be ignored if the
	   handle has been destroyed, so often you can just ignore the
	   possibility of the handle being destroyed.

       AnyEvent::Handle::TLS_CTX
	   This function creates and returns the AnyEvent::TLS object used by
	   default for TLS mode.

	   The context is created by calling AnyEvent::TLS without any
	   arguments.

NONFREQUENTLY ASKED QUESTIONS
       I "undef" the AnyEvent::Handle reference inside my callback and still
       get further invocations!
	   That's because AnyEvent::Handle keeps a reference to itself when
	   handling read or write callbacks.

	   It is only safe to "forget" the reference inside EOF or error
	   callbacks, from within all other callbacks, you need to explicitly
	   call the "->destroy" method.

       I get different callback invocations in TLS mode/Why can't I pause
       reading?
	   Unlike, say, TCP, TLS connections do not consist of two independent
	   communication channels, one for each direction. Or put differently.
	   The read and write directions are not independent of each other:
	   you cannot write data unless you are also prepared to read, and
	   vice versa.

	   This can mean than, in TLS mode, you might get "on_error" or
	   "on_eof" callback invocations when you are not expecting any read
	   data - the reason is that AnyEvent::Handle always reads in TLS
	   mode.

	   During the connection, you have to make sure that you always have a
	   non-empty read-queue, or an "on_read" watcher. At the end of the
	   connection (or when you no longer want to use it) you can call the
	   "destroy" method.

       How do I read data until the other side closes the connection?
	   If you just want to read your data into a perl scalar, the easiest
	   way to achieve this is by setting an "on_read" callback that does
	   nothing, clearing the "on_eof" callback and in the "on_error"
	   callback, the data will be in "$_[0]{rbuf}":

	      $handle->on_read (sub { });
	      $handle->on_eof (undef);
	      $handle->on_error (sub {
		 my $data = delete $_[0]{rbuf};
	      });

	   The reason to use "on_error" is that TCP connections, due to
	   latencies and packets loss, might get closed quite violently with
	   an error, when in fact, all data has been received.

	   It is usually better to use acknowledgements when transferring
	   data, to make sure the other side hasn't just died and you got the
	   data intact. This is also one reason why so many internet protocols
	   have an explicit QUIT command.

       I don't want to destroy the handle too early - how do I wait until all
       data has been written?
	   After writing your last bits of data, set the "on_drain" callback
	   and destroy the handle in there - with the default setting of
	   "low_water_mark" this will be called precisely when all data has
	   been written to the socket:

	      $handle->push_write (...);
	      $handle->on_drain (sub {
		 warn "all data submitted to the kernel\n";
		 undef $handle;
	      });

	   If you just want to queue some data and then signal EOF to the
	   other side, consider using "->push_shutdown" instead.

       I want to contact a TLS/SSL server, I don't care about security.
	   If your TLS server is a pure TLS server (e.g. HTTPS) that only
	   speaks TLS, simply connect to it and then create the
	   AnyEvent::Handle with the "tls" parameter:

	      tcp_connect $host, $port, sub {
		 my ($fh) = @_;

		 my $handle = new AnyEvent::Handle
		    fh	=> $fh,
		    tls => "connect",
		    on_error => sub { ... };

		 $handle->push_write (...);
	      };

       I want to contact a TLS/SSL server, I do care about security.
	   Then you should additionally enable certificate verification,
	   including peername verification, if the protocol you use supports
	   it (see AnyEvent::TLS, "verify_peername").

	   E.g. for HTTPS:

	      tcp_connect $host, $port, sub {
		 my ($fh) = @_;

		  my $handle = new AnyEvent::Handle
		     fh	      => $fh,
		     peername => $host,
		     tls      => "connect",
		     tls_ctx  => { verify => 1, verify_peername => "https" },
		     ...

	   Note that you must specify the hostname you connected to (or
	   whatever "peername" the protocol needs) as the "peername" argument,
	   otherwise no peername verification will be done.

	   The above will use the system-dependent default set of trusted CA
	   certificates. If you want to check against a specific CA, add the
	   "ca_file" (or "ca_cert") arguments to "tls_ctx":

		  tls_ctx  => {
		     verify	     => 1,
		     verify_peername => "https",
		     ca_file	     => "my-ca-cert.pem",
		  },

       I want to create a TLS/SSL server, how do I do that?
	   Well, you first need to get a server certificate and key. You have
	   three options: a) ask a CA (buy one, use cacert.org etc.) b) create
	   a self-signed certificate (cheap. check the search engine of your
	   choice, there are many tutorials on the net) or c) make your own CA
	   (tinyca2 is a nice program for that purpose).

	   Then create a file with your private key (in PEM format, see
	   AnyEvent::TLS), followed by the certificate (also in PEM format).
	   The file should then look like this:

	      -----BEGIN RSA PRIVATE KEY-----
	      ...header data
	      ... lots of base64'y-stuff
	      -----END RSA PRIVATE KEY-----

	      -----BEGIN CERTIFICATE-----
	      ... lots of base64'y-stuff
	      -----END CERTIFICATE-----

	   The important bits are the "PRIVATE KEY" and "CERTIFICATE" parts.
	   Then specify this file as "cert_file":

	      tcp_server undef, $port, sub {
		 my ($fh) = @_;

		 my $handle = new AnyEvent::Handle
		    fh	     => $fh,
		    tls	     => "accept",
		    tls_ctx  => { cert_file => "my-server-keycert.pem" },
		    ...

	   When you have intermediate CA certificates that your clients might
	   not know about, just append them to the "cert_file".

SUBCLASSING AnyEvent::Handle
       In many cases, you might want to subclass AnyEvent::Handle.

       To make this easier, a given version of AnyEvent::Handle uses these
       conventions:

       ·   all constructor arguments become object members.

	   At least initially, when you pass a "tls"-argument to the
	   constructor it will end up in "$handle->{tls}". Those members might
	   be changed or mutated later on (for example "tls" will hold the TLS
	   connection object).

       ·   other object member names are prefixed with an "_".

	   All object members not explicitly documented (internal use) are
	   prefixed with an underscore character, so the remaining
	   non-"_"-namespace is free for use for subclasses.

       ·   all members not documented here and not prefixed with an underscore
	   are free to use in subclasses.

	   Of course, new versions of AnyEvent::Handle may introduce more
	   "public" member variables, but thats just life, at least it is
	   documented.

AUTHOR
       Robin Redeker "<elmex at ta-sa.org>", Marc Lehmann
       <schmorp@schmorp.de>.

perl v5.14.2			  2010-06-08		   AnyEvent::Handle(3)
[top]

List of man pages available for Pidora

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net